Bonjour,
depuis hier, mon PC sous debian 7, sur lequel je n’ai fait, me semble-t-il, aucune intervention particulière (pas de mise à jour), démarre avec une sortie écran en résolution 1024x768, alors qu’il fonctionnait sans problème auparavant, et depuis plusieurs années, sur une résolution supérieure.
En suivant https://doc.ubuntu-fr.org/xrandr, je parviens à passer à d’autres résolutions (actuellement 1400x1050), mais ce n’est pas satisfaisant : débordements (par exemple, la barre des tâches inférieure est en dehors de la zone d’affichage mais j’ai d’autres débordements avec d’autres résolutions), impression géénrale de flou, notamment pour le texte.
J’ai cru comprendre que le fichier /etc/X11/xorg.conf est censé gérer la détection et la configuration de l’écran au démarrage, mais il est absent. Le système lit /usr/share/X11/xorg.conf.d et ne trouve effectivement rien de mieux que la résolution 1024x768. Pour plus de précision, voici /var/log/Xorg.0.log :
[code] bidule@rhododendron:$ cat /var/log/Xorg.0.log
[ 20.478]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 20.478] X Protocol Version 11, Revision 0
[ 20.478] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 20.478] Current Operating System: Linux rhododendron 3.2.0-4-686-pae #1 SMP Debian 3.2.73-2+deb7u2 i686
[ 20.478] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=ffa8eca6-e8cc-49e4-9b40-19158c69be11 ro quiet
[ 20.478] Build Date: 09 February 2015 10:12:47AM
[ 20.478] xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau jcristau@debian.org)
[ 20.478] Current version of pixman: 0.26.0
[ 20.478] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.478] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.478] (==) Log file: “/var/log/Xorg.0.log”, Time: Fri Feb 12 08:48:05 2016
[ 20.570] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 20.614] (==) No Layout section. Using the first Screen section.
[ 20.614] (==) No screen section available. Using defaults.
[ 20.614] () |–>Screen “Default Screen Section” (0)
[ 20.614] (**) | |–>Monitor “”
[ 20.622] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[ 20.623] (==) Automatically adding devices
[ 20.623] (==) Automatically enabling devices
[ 20.692] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
[ 20.692] Entry deleted from font path.
[ 20.700] (WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
[ 20.700] Entry deleted from font path.
[ 20.700] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 20.700] (==) ModulePath set to “/usr/lib/xorg/modules”
[ 20.700] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.735] (II) Loader magic: 0xb771e5a0
[ 20.735] (II) Module ABI versions:
[ 20.735] X.Org ANSI C Emulation: 0.4
[ 20.735] X.Org Video Driver: 12.1
[ 20.735] X.Org XInput driver : 16.0
[ 20.735] X.Org Server Extension : 6.0
[ 20.737] (–) PCI:*(0:0:16:0) 10de:07e1:1458:d000 rev 162, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe3000000/16777216, BIOS @ 0x???/131072
[ 20.737] (II) Open ACPI successful (/var/run/acpid.socket)
[ 20.737] (II) LoadModule: “extmod”
[ 20.773] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.787] (II) Module extmod: vendor=“X.Org Foundation”
[ 20.787] compiled for 1.12.4, module version = 1.0.0
[ 20.787] Module class: X.Org Server Extension
[ 20.788] ABI class: X.Org Server Extension, version 6.0
[ 20.788] (II) Loading extension SELinux
[ 20.788] (II) Loading extension MIT-SCREEN-SAVER
[ 20.788] (II) Loading extension XFree86-VidModeExtension
[ 20.788] (II) Loading extension XFree86-DGA
[ 20.788] (II) Loading extension DPMS
[ 20.788] (II) Loading extension XVideo
[ 20.788] (II) Loading extension XVideo-MotionCompensation
[ 20.788] (II) Loading extension X-Resource
[ 20.788] (II) LoadModule: “dbe”
[ 20.788] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.807] (II) Module dbe: vendor=“X.Org Foundation”
[ 20.807] compiled for 1.12.4, module version = 1.0.0
[ 20.807] Module class: X.Org Server Extension
[ 20.807] ABI class: X.Org Server Extension, version 6.0
[ 20.807] (II) Loading extension DOUBLE-BUFFER
[ 20.807] (II) LoadModule: “glx”
[ 20.807] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.828] (II) Module glx: vendor=“X.Org Foundation”
[ 20.828] compiled for 1.12.4, module version = 1.0.0
[ 20.828] ABI class: X.Org Server Extension, version 6.0
[ 20.828] (==) AIGLX enabled
[ 20.828] (II) Loading extension GLX
[ 20.828] (II) LoadModule: “record”
[ 20.828] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.829] (II) Module record: vendor=“X.Org Foundation”
[ 20.829] compiled for 1.12.4, module version = 1.13.0
[ 20.829] Module class: X.Org Server Extension
[ 20.829] ABI class: X.Org Server Extension, version 6.0
[ 20.829] (II) Loading extension RECORD
[ 20.829] (II) LoadModule: “dri”
[ 20.829] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.873] (II) Module dri: vendor=“X.Org Foundation”
[ 20.873] compiled for 1.12.4, module version = 1.0.0
[ 20.873] ABI class: X.Org Server Extension, version 6.0
[ 20.873] (II) Loading extension XFree86-DRI
[ 20.873] (II) LoadModule: “dri2”
[ 20.873] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.873] (II) Module dri2: vendor=“X.Org Foundation”
[ 20.873] compiled for 1.12.4, module version = 1.2.0
[ 20.874] ABI class: X.Org Server Extension, version 6.0
[ 20.874] (II) Loading extension DRI2
[ 20.874] (==) Matched nouveau as autoconfigured driver 0
[ 20.874] (==) Matched nv as autoconfigured driver 1
[ 20.874] (==) Matched vesa as autoconfigured driver 2
[ 20.874] (==) Matched fbdev as autoconfigured driver 3
[ 20.874] (==) Assigned the driver to the xf86ConfigLayout
[ 20.874] (II) LoadModule: “nouveau”
[ 20.881] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 20.891] (II) Module nouveau: vendor=“X.Org Foundation”
[ 20.891] compiled for 1.12.4, module version = 1.0.1
[ 20.891] Module class: X.Org Video Driver
[ 20.891] ABI class: X.Org Video Driver, version 12.1
[ 20.892] (II) LoadModule: “nv”
[ 20.893] (WW) Warning, couldn’t open module nv
[ 20.893] (II) UnloadModule: “nv”
[ 20.893] (II) Unloading nv
[ 20.893] (EE) Failed to load module “nv” (module does not exist, 0)
[ 20.893] (II) LoadModule: “vesa”
[ 20.893] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.911] (II) Module vesa: vendor=“X.Org Foundation”
[ 20.911] compiled for 1.12.1, module version = 2.3.1
[ 20.911] Module class: X.Org Video Driver
[ 20.911] ABI class: X.Org Video Driver, version 12.0
[ 20.911] (II) LoadModule: “fbdev”
[ 20.911] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.918] (II) Module fbdev: vendor=“X.Org Foundation”
[ 20.919] compiled for 1.12.1, module version = 0.4.2
[ 20.919] ABI class: X.Org Video Driver, version 12.0
[ 20.919] (II) NOUVEAU driver Date: Fri Jul 6 16:23:50 2012 +1000
[ 20.919] (II) NOUVEAU driver for NVIDIA chipset families :
[ 20.919] RIVA TNT (NV04)
[ 20.919] RIVA TNT2 (NV05)
[ 20.919] GeForce 256 (NV10)
[ 20.919] GeForce 2 (NV11, NV15)
[ 20.919] GeForce 4MX (NV17, NV18)
[ 20.919] GeForce 3 (NV20)
[ 20.919] GeForce 4Ti (NV25, NV28)
[ 20.919] GeForce FX (NV3x)
[ 20.919] GeForce 6 (NV4x)
[ 20.919] GeForce 7 (G7x)
[ 20.919] GeForce 8 (G8x)
[ 20.919] GeForce GTX 200 (NVA0)
[ 20.919] GeForce GTX 400 (NVC0)
[ 20.919] (II) VESA: driver for VESA chipsets: vesa
[ 20.919] (II) FBDEV: driver for framebuffer: fbdev
[ 20.920] (++) using VT number 7
[ 20.922] drmOpenDevice: node name is /dev/dri/card0
[ 20.922] drmOpenDevice: open result is 8, (OK)
[ 20.922] drmOpenByBusid: Searching for BusID pci:0000:00:10.0
[ 20.922] drmOpenDevice: node name is /dev/dri/card0
[ 20.922] drmOpenDevice: open result is 8, (OK)
[ 20.922] drmOpenByBusid: drmOpenMinor returns 8
[ 20.922] drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
[ 20.922] (II) [drm] nouveau interface version: 1.0.0
[ 20.922] (WW) Falling back to old probe method for vesa
[ 20.922] (WW) Falling back to old probe method for fbdev
[ 20.922] (II) Loading sub module “fbdevhw”
[ 20.922] (II) LoadModule: “fbdevhw”
[ 20.922] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.955] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 20.955] compiled for 1.12.4, module version = 0.0.2
[ 20.955] ABI class: X.Org Video Driver, version 12.1
[ 20.955] (II) Loading sub module “dri”
[ 20.955] (II) LoadModule: “dri”
[ 20.955] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.955] (II) Module dri: vendor=“X.Org Foundation”
[ 20.955] compiled for 1.12.4, module version = 1.0.0
[ 20.955] ABI class: X.Org Server Extension, version 6.0
[ 20.955] (II) NOUVEAU(0): Loaded DRI module
[ 20.955] drmOpenDevice: node name is /dev/dri/card0
[ 20.955] drmOpenDevice: open result is 9, (OK)
[ 20.955] drmOpenDevice: node name is /dev/dri/card0
[ 20.955] drmOpenDevice: open result is 9, (OK)
[ 20.955] drmOpenByBusid: Searching for BusID pci:0000:00:10.0
[ 20.955] drmOpenDevice: node name is /dev/dri/card0
[ 20.955] drmOpenDevice: open result is 9, (OK)
[ 20.955] drmOpenByBusid: drmOpenMinor returns 9
[ 20.955] drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
[ 20.955] (II) [drm] DRM interface version 1.4
[ 20.955] (II) [drm] DRM open master succeeded.
[ 20.955] (–) NOUVEAU(0): Chipset: “NVIDIA NV63”
[ 20.955] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.955] (==) NOUVEAU(0): Depth 24, (–) framebuffer bpp 32
[ 20.955] (==) NOUVEAU(0): RGB weight 888
[ 20.955] (==) NOUVEAU(0): Default visual is TrueColor
[ 20.955] (==) NOUVEAU(0): Using HW cursor
[ 20.956] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 20.956] (==) NOUVEAU(0): Page flipping enabled
[ 20.956] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 20.984] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 20.986] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 21.012] (II) NOUVEAU(0): EDID for output VGA-1
[ 21.012] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 21.012] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 21.012] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 21.012] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 21.012] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 21.012] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 21.014] (II) NOUVEAU(0): EDID for output HDMI-1
[ 21.014] (II) NOUVEAU(0): Output VGA-1 connected
[ 21.014] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 21.014] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 21.014] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 21.014] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.014] (–) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 21.014] () NOUVEAU(0): Driver mode “1024x768”: 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 21.014] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 21.014] () NOUVEAU(0): Driver mode “800x600”: 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 21.014] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 21.014] () NOUVEAU(0): Driver mode “800x600”: 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 21.014] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 21.014] () NOUVEAU(0): Driver mode “848x480”: 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 21.014] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 21.014] () NOUVEAU(0): Driver mode “640x480”: 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 21.014] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 21.014] (==) NOUVEAU(0): DPI set to (96, 96)
[ 21.014] (II) Loading sub module “fb”
[ 21.014] (II) LoadModule: “fb”
[ 21.014] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.107] (II) Module fb: vendor=“X.Org Foundation”
[ 21.107] compiled for 1.12.4, module version = 1.0.0
[ 21.107] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.107] (II) Loading sub module “exa”
[ 21.107] (II) LoadModule: “exa”
[ 21.107] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 21.108] (II) Module exa: vendor=“X.Org Foundation”
[ 21.108] compiled for 1.12.4, module version = 2.5.0
[ 21.108] ABI class: X.Org Video Driver, version 12.1
[ 21.108] (II) Loading sub module “shadowfb”
[ 21.108] (II) LoadModule: “shadowfb”
[ 21.108] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 21.116] (II) Module shadowfb: vendor=“X.Org Foundation”
[ 21.116] compiled for 1.12.4, module version = 1.0.0
[ 21.116] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.116] (II) UnloadModule: “vesa”
[ 21.116] (II) Unloading vesa
[ 21.116] (II) UnloadModule: “fbdev”
[ 21.116] (II) Unloading fbdev
[ 21.116] (II) UnloadSubModule: “fbdevhw”
[ 21.116] (II) Unloading fbdevhw
[ 21.116] (–) Depth 24 pixmap format is 32 bpp
[ 21.116] (II) NOUVEAU(0): Opened GPU channel 1
[ 21.117] (II) NOUVEAU(0): [DRI2] Setup complete
[ 21.117] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 21.117] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 21.158] (II) EXA(0): Driver allocated offscreen pixmaps
[ 21.158] (II) EXA(0): Driver registered support for the following operations:
[ 21.158] (II) Solid
[ 21.158] (II) Copy
[ 21.158] (II) Composite (RENDER acceleration)
[ 21.158] (II) UploadToScreen
[ 21.158] (II) DownloadFromScreen
[ 21.158] (==) NOUVEAU(0): Backing store disabled
[ 21.158] (==) NOUVEAU(0): Silken mouse enabled
[ 21.158] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 21.159] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 21.159] (==) NOUVEAU(0): DPMS enabled
[ 21.159] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.159] (–) RandR disabled
[ 21.159] (II) Initializing built-in extension Generic Event Extension
[ 21.159] (II) Initializing built-in extension SHAPE
[ 21.159] (II) Initializing built-in extension MIT-SHM
[ 21.159] (II) Initializing built-in extension XInputExtension
[ 21.159] (II) Initializing built-in extension XTEST
[ 21.159] (II) Initializing built-in extension BIG-REQUESTS
[ 21.159] (II) Initializing built-in extension SYNC
[ 21.159] (II) Initializing built-in extension XKEYBOARD
[ 21.159] (II) Initializing built-in extension XC-MISC
[ 21.159] (II) Initializing built-in extension SECURITY
[ 21.159] (II) Initializing built-in extension XINERAMA
[ 21.159] (II) Initializing built-in extension XFIXES
[ 21.159] (II) Initializing built-in extension RENDER
[ 21.159] (II) Initializing built-in extension RANDR
[ 21.159] (II) Initializing built-in extension COMPOSITE
[ 21.159] (II) Initializing built-in extension DAMAGE
[ 21.159] (II) SELinux: Disabled on system
[ 21.618] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.618] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.618] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 21.618] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.619] (II) AIGLX: Loaded and initialized nouveau
[ 21.619] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.655] (II) NOUVEAU(0): NVEnterVT is called.
[ 21.656] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 21.656] resize called 1024 768
[ 22.282] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 22.282] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 22.282] (II) LoadModule: “evdev”
[ 22.282] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.292] (II) Module evdev: vendor=“X.Org Foundation”
[ 22.292] compiled for 1.12.1, module version = 2.7.0
[ 22.292] Module class: X.Org XInput Driver
[ 22.292] ABI class: X.Org XInput driver, version 16.0
[ 22.292] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 22.292] () Power Button: always reports core events
[ 22.292] () evdev: Power Button: Device: “/dev/input/event2”
[ 22.292] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 22.292] (–) evdev: Power Button: Found keys
[ 22.293] (II) evdev: Power Button: Configuring as keyboard
[ 22.293] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2”
[ 22.293] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
[ 22.293] () Option “xkb_rules” “evdev”
[ 22.293] () Option “xkb_model” “pc105”
[ 22.293] () Option “xkb_layout” “fr”
[ 22.293] () Option “xkb_variant” “latin9”
[ 22.357] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 22.357] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 22.358] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 22.358] () Power Button: always reports core events
[ 22.358] () evdev: Power Button: Device: “/dev/input/event1”
[ 22.358] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 22.358] (–) evdev: Power Button: Found keys
[ 22.358] (II) evdev: Power Button: Configuring as keyboard
[ 22.358] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1”
[ 22.358] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 7)
[ 22.358] () Option “xkb_rules” “evdev”
[ 22.358] () Option “xkb_model” “pc105”
[ 22.358] () Option “xkb_layout” “fr”
[ 22.358] () Option “xkb_variant” “latin9”
[ 22.358] (II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
[ 22.358] (II) No input driver specified, ignoring this device.
[ 22.358] (II) This device may have been added with another device file.
[ 22.359] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 22.359] () AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
[ 22.359] (II) Using input driver ‘evdev’ for ‘AT Translated Set 2 keyboard’
[ 22.359] () AT Translated Set 2 keyboard: always reports core events
[ 22.359] () evdev: AT Translated Set 2 keyboard: Device: “/dev/input/event0”
[ 22.359] (–) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 22.359] (–) evdev: AT Translated Set 2 keyboard: Found keys
[ 22.359] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 22.359] () Option “config_info” “udev:/sys/devices/platform/i8042/serio0/input/input0/event0”
[ 22.359] (II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD, id 8)
[ 22.359] () Option “xkb_rules” “evdev”
[ 22.359] () Option “xkb_model” “pc105”
[ 22.359] () Option “xkb_layout” “fr”
[ 22.359] () Option “xkb_variant” “latin9”
[ 22.360] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4)
[ 22.360] () ImPS/2 Generic Wheel Mouse: Applying InputClass “evdev pointer catchall”
[ 22.360] (II) Using input driver ‘evdev’ for ‘ImPS/2 Generic Wheel Mouse’
[ 22.360] () ImPS/2 Generic Wheel Mouse: always reports core events
[ 22.360] () evdev: ImPS/2 Generic Wheel Mouse: Device: “/dev/input/event4”
[ 22.360] (–) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 22.360] (–) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 22.360] (–) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 22.360] (–) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 22.360] (–) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 22.360] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 22.360] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 22.360] () evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 22.360] () evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.360] () Option “config_info” “udev:/sys/devices/platform/i8042/serio1/input/input4/event4”
[ 22.360] (II) XINPUT: Adding extended input device “ImPS/2 Generic Wheel Mouse” (type: MOUSE, id 9)
[ 22.360] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 22.360] () ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 22.360] () ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 22.360] () ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 22.360] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 22.361] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 22.361] (II) No input driver specified, ignoring this device.
[ 22.361] (II) This device may have been added with another device file.
[ 22.361] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 22.361] (II) No input driver specified, ignoring this device.
[ 22.361] (II) This device may have been added with another device file.
[ 82.558] resize called 1024 768
[ 121.964] resize called 1024 768
[ 139.733] resize called 1280 1024
[ 306.289] resize called 1024 768
[ 324.345] resize called 1280 960
[ 1055.366] resize called 1024 768
[ 1097.181] resize called 1400 1050[/code]
J’apprécierais un peu d’aide pour comprendre ce qui s’est passé, remettre le système d’aplomb, ne serait-ce que confirmer que le fichier /etc/X11/xorg.conf est bien en cause. Merci beaucoup !