# acpi\_power\_off called

**URL:** <https://www.debian-fr.org/t/acpi-power-off-called/20328>\
**Category:** Support Debian\
**Created:** [Février 20, 2016, 8:13 UTC](https://www.debian-fr.org/t/acpi-power-off-called/20328 "2016-02-20T20:13:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rwk](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/r/ba8739/32.png) [@rwk](https://www.debian-fr.org/u/rwk)\
**Post date:** [Février 20, 2016, 8:13 UTC](https://www.debian-fr.org/t/acpi-power-off-called/20328/1 "2016-02-20T20:13:00Z")

</div>

Bonjour,

Après une recherche j’ai trouvé 2 sujets similaires mais aucun m’apportant une réponse

- sujet 1 : [viewtopic.php?f=3&t=4909&hilit=acpi\_power\_off+called](http://forum.debian-fr.org/viewtopic.php?f=3&t=4909&hilit=acpi_power_off+called)
- sujet 2 : [viewtopic.php?f=3&t=1635&hilit=acpi\_power\_off+called](http://forum.debian-fr.org/viewtopic.php?f=3&t=1635&hilit=acpi_power_off+called)

Je suis donc légèrement perdu.

Contexte :

Il y a quelques mois, je suis passé de Etch à Lenny par une grosse mise à jour via aptitude.  
Depuis, ça coince.

En effet, j’ai remarqué 2 symptômes à ça :

- Lorsque j’éteins mon ordinateur, j’ai tout un blabla et après le acpi\_power\_off called… et bien rien du tout.  
L’ordi ne s’arrête pas, je suis obligé soit de rester 5 secondes sur le bouton d’allumage, soit de débrancher le secteur

- Lorsque je le démarre, ça peut prendre entre 3 minutes et 35 minutes. J’appuie sur le bouton de démarrage du PC, écran noir… J’éteins… Je rallume et ce, jusqu’à ce qu’il m’envoie enfin au grub…

Une fois au grub : 2 solutions

- J’ai de la chance et le clavier du pc est pris en charge… Dans ce cas là, où j’ai de la chance et tout va bien (faut avoir 2 fois de la chance d’affilé)… ou j’ai pas de chance et les ports USB ne sont pas pris en compte (et donc je ré-éteins tout et je recommence)

- Soit j’ai pas de chance, le clavier est pas pris en compte, je dois atteindre le décompte du grub et ensuite, soit j’ai un peu de chance et l’USB est pris en compte… sinon, c’est reparti.

Tout ces symptômes me font constater 4 choses :  
1- Mon PC portable craque de partout, mais il me sert pour le boulot et j’peux pas prendre le risque de tout ré-installer sous peine qu’il craque complètement  
2- Y a surement eu une grosse bolocks dans le potage à l’upgrade  
3- Soit tout va bien et j’ai surement pas compris un truc  
4- En fait, c’est 1 + 2 + 3

Bref… Aujourd’hui je balise à chaque début de journée. J’ai actuellement pas les moyens de me payer un nouveau PC portable. Ce PC est mon gagne pain. Je suis analyste-développeur dans une petite société que j’ai créé avec un ami en janvier et c’n’est pas encore le moment pour nous d’investir (pas avant Noël qui terminera notre année fiscale).

Chaque soir je transfère tous mes travaux, en cas de coup dur…

Alors avez-vous une solution non violente, c’est à dire :

- Sans avoir à recompiler le noyau
- Sans avoir à manipuler trop de fichiers et de me retrouver avec un Kernel Panic (j’suis pas super à l’aise en config. Je me contente de programmer, pas de bidouiller) car je suis à peu prêt certain que je n’arriverais plus à refaire tout marcher.

Ma machine actuelle :

- Acer Aspire 1800
- j’dirais 512 de ram
- DD 120 Go, 20 Go Linux, 20 Go WinXp, 1 Go Swap, 79 Go partition commune (fat32)

Infos Linux

- Linux Rwk-portable 2.6.26-2-686 #1 SMP Thu Mar 26 01:08:11 UTC 2009 i686 GNU/Linux

> [@](#):
>
> # dmidecode 2.9
> 
> SMBIOS 2.31 present.  
> 29 structures occupying 902 bytes.  
> Table at 0x000DC010.
> 
> Handle 0x0000, DMI type 0, 20 bytes  
> BIOS Information  
> Vendor: PHOENIX FirstBIOS  
> Version: V2.60  
> Release Date: 01/03/2005  
> Address: 0xE4170  
> Runtime Size: 114320 bytes  
> ROM Size: 512 kB  
> Characteristics:  
> ISA is supported  
> PCI is supported  
> PC Card (PCMCIA) is supported  
> PNP is supported  
> APM is supported  
> BIOS is upgradeable  
> BIOS shadowing is allowed  
> ESCD support is available  
> ACPI is supported  
> USB legacy is supported  
> AGP is supported  
> Smart battery is supported  
> BIOS boot specification is supported
> 
> Handle 0x0001, DMI type 1, 25 bytes  
> System Information  
> Manufacturer: Acer  
> Product Name:  
> Version: Null  
> Serial Number: Null  
> UUID: 2217B671-FA44-F3EA-E50D-00023F0C4840  
> Wake-up Type: Power Switch
> 
> Handle 0x0002, DMI type 2, 8 bytes  
> Base Board Information  
> Manufacturer:  
> Product Name:  
> Version: Null  
> Serial Number:
> 
> Handle 0x0003, DMI type 3, 21 bytes  
> Chassis Information  
> Manufacturer: No Enclosure  
> Type: Other  
> Lock: Not Present  
> Version: N/A  
> Serial Number: None  
> Asset Tag: No Asset Tag  
> Boot-up State: Safe  
> Power Supply State: Safe  
> Thermal State: Safe  
> Security Status: None  
> OEM Information: 0x00000000  
> Height: 52 U  
> Number Of Power Cords: 18  
> Contained Elements: 0
> 
> Handle 0x0004, DMI type 4, 35 bytes  
> Processor Information  
> Socket Designation: WMT478/NWD  
> Type: Central Processor  
> Family: Pentium 4  
> Manufacturer: Intel  
> ID: 34 0F 00 00 FF FB EB BF  
> Signature: Type 0, Family 15, Model 3, Stepping 4  
> Flags:  
> FPU (Floating-point unit on-chip)  
> VME (Virtual mode extension)  
> DE (Debugging extension)  
> PSE (Page size extension)  
> TSC (Time stamp counter)  
> MSR (Model specific registers)  
> PAE (Physical address extension)  
> MCE (Machine check exception)  
> CX8 (CMPXCHG8 instruction supported)  
> APIC (On-chip APIC hardware supported)  
> SEP (Fast system call)  
> MTRR (Memory type range registers)  
> PGE (Page global enable)  
> MCA (Machine check architecture)  
> CMOV (Conditional move instruction supported)  
> PAT (Page attribute table)  
> PSE-36 (36-bit page size extension)  
> CLFSH (CLFLUSH instruction supported)  
> DS (Debug store)  
> ACPI (ACPI supported)  
> MMX (MMX technology supported)  
> FXSR (Fast floating-point save and restore)  
> SSE (Streaming SIMD extensions)  
> SSE2 (Streaming SIMD extensions 2)  
> SS (Self-snoop)  
> HTT (Hyper-threading technology)  
> TM (Thermal monitor supported)  
> PBE (Pending break enabled)  
> Version: D0  
> Voltage: 1.8 V  
> External Clock: 200 MHz  
> Max Speed: 1600 MHz  
> Current Speed: 3200 MHz  
> Status: Populated, Enabled  
> Upgrade: Slot 1  
> L1 Cache Handle: 0x0008  
> L2 Cache Handle: 0x0009  
> L3 Cache Handle: Not Provided  
> Serial Number: Not Specified  
> Asset Tag: Not Specified  
> Part Number: Not Specified
> 
> Handle 0x0005, DMI type 5, 20 bytes  
> Memory Controller Information  
> Error Detecting Method: None  
> Error Correcting Capabilities:  
> None  
> Supported Interleave: One-way Interleave  
> Current Interleave: One-way Interleave  
> Maximum Memory Module Size: 1024 MB  
> Maximum Total Memory Size: 2048 MB  
> Supported Speeds:  
> 70 ns  
> 60 ns  
> Supported Memory Types:  
> DIMM  
> SDRAM  
> Memory Module Voltage: 3.3 V  
> Associated Memory Slots: 2  
> 0x0006  
> 0x0007  
> Enabled Error Correcting Capabilities:  
> Unknown
> 
> Handle 0x0006, DMI type 6, 12 bytes  
> Memory Module Information  
> Socket Designation: M1  
> Bank Connections: 0 1  
> Current Speed: Unknown  
> Type: DIMM SDRAM  
> Installed Size: 256 MB (Double-bank Connection)  
> Enabled Size: 256 MB (Double-bank Connection)  
> Error Status: OK
> 
> Handle 0x0007, DMI type 6, 12 bytes  
> Memory Module Information  
> Socket Designation: M2  
> Bank Connections: 2 3  
> Current Speed: Unknown  
> Type: DIMM SDRAM  
> Installed Size: 256 MB (Double-bank Connection)  
> Enabled Size: 256 MB (Double-bank Connection)  
> Error Status: OK
> 
> Handle 0x0008, DMI type 7, 19 bytes  
> Cache Information  
> Socket Designation: L1 Cache  
> Configuration: Enabled, Socketed, Level 1  
> Operational Mode: Write Back  
> Location: Internal  
> Installed Size: 16 KB  
> Maximum Size: 16 KB  
> Supported SRAM Types:  
> Burst  
> Pipeline Burst  
> Asynchronous  
> Installed SRAM Type: Asynchronous  
> Speed: Unknown  
> Error Correction Type: Unknown  
> System Type: Unknown  
> Associativity: Unknown
> 
> Handle 0x0009, DMI type 7, 19 bytes  
> Cache Information  
> Socket Designation: L2 Cache  
> Configuration: Enabled, Socketed, Level 2  
> Operational Mode: Write Back  
> Location: Internal  
> Installed Size: 1024 KB  
> Maximum Size: 512 KB  
> Supported SRAM Types:  
> Burst  
> Pipeline Burst  
> Asynchronous  
> Installed SRAM Type: Burst  
> Speed: Unknown  
> Error Correction Type: Unknown  
> System Type: Unknown  
> Associativity: Unknown
> 
> Handle 0x000A, DMI type 7, 19 bytes  
> Cache Information  
> Socket Designation: L3 Cache  
> Configuration: Enabled, Socketed, Level 3  
> Operational Mode: Write Back  
> Location: Internal  
> Installed Size: 1024 KB  
> Maximum Size: 512 KB  
> Supported SRAM Types:  
> Burst  
> Pipeline Burst  
> Asynchronous  
> Installed SRAM Type: Burst  
> Speed: Unknown  
> Error Correction Type: Unknown  
> System Type: Unknown  
> Associativity: Unknown
> 
> Handle 0x000B, DMI type 8, 9 bytes  
> Port Connector Information  
> Internal Reference Designator: J2A1  
> Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)  
> External Reference Designator: COM 1  
> External Connector Type: DB-9 male  
> Port Type: Serial Port 16550A Compatible
> 
> Handle 0x000C, DMI type 8, 9 bytes  
> Port Connector Information  
> Internal Reference Designator: J3A1  
> Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)  
> External Reference Designator: Parallel  
> External Connector Type: DB-25 female  
> Port Type: Parallel Port ECP/EPP
> 
> Handle 0x000D, DMI type 8, 9 bytes  
> Port Connector Information  
> Internal Reference Designator: J1A1  
> Internal Connector Type: None  
> External Reference Designator: Keyboard  
> External Connector Type: Circular DIN-8 male  
> Port Type: Keyboard Port
> 
> Handle 0x000E, DMI type 8, 9 bytes  
> Port Connector Information  
> Internal Reference Designator: J1A1  
> Internal Connector Type: None  
> External Reference Designator: PS/2 Mouse  
> External Connector Type: Circular DIN-8 male  
> Port Type: Keyboard Port
> 
> Handle 0x000F, DMI type 9, 13 bytes  
> System Slot Information  
> Designation: PCI Slot #1 - J5B1  
> Type: 32-bit PCI  
> Current Usage: Unknown  
> Length: Long  
> ID: 0  
> Characteristics:  
> 5.0 V is provided  
> 3.3 V is provided
> 
> Handle 0x0010, DMI type 10, 6 bytes  
> On Board Device Information  
> Type: Sound  
> Status: Disabled  
> Description: ADI1886
> 
> Handle 0x0011, DMI type 11, 5 bytes  
> OEM Strings  
> String 1: This is the Intel 915G  
> String 2: Customer Reference Board
> 
> Handle 0x0012, DMI type 12, 5 bytes  
> System Configuration Options  
> Option 1: Jumper settings can be described here.
> 
> Handle 0x0013, DMI type 15, 29 bytes  
> System Event Log  
> Area Length: 0 bytes  
> Header Start Offset: 0x0000  
> Header Length: 16 bytes  
> Data Start Offset: 0x0010  
> Access Method: General-purpose non-volatile data functions  
> Access Address: 0x0000  
> Status: Invalid, Not Full  
> Change Token: 0x000000AB  
> Header Format: Type 1  
> Supported Log Type Descriptors: 3  
> Descriptor 1: POST error  
> Data Format 1: POST results bitmap  
> Descriptor 2: Single-bit ECC memory error  
> Data Format 2: Multiple-event  
> Descriptor 3: Multi-bit ECC memory error  
> Data Format 3: Multiple-event
> 
> Handle 0x0014, DMI type 16, 15 bytes  
> Physical Memory Array  
> Location: System Board Or Motherboard  
> Use: System Memory  
> Error Correction Type: None  
> Maximum Capacity: 4 GB  
> Error Information Handle: Not Provided  
> Number Of Devices: 2
> 
> Handle 0x0015, DMI type 17, 27 bytes  
> Memory Device  
> Array Handle: 0x0014  
> Error Information Handle: No Error  
> Total Width: 72 bits  
> Data Width: 64 bits  
> Size: 256 MB  
> Form Factor: DIMM  
> Set: 1  
> Locator: J6G1  
> Bank Locator: DIMM 0  
> Type: DDR  
> Type Detail: Synchronous  
> Speed: 133 MHz (7.5 ns)  
> Manufacturer: Not Specified  
> Serial Number: Not Specified  
> Asset Tag: Not Specified  
> Part Number: Not Specified
> 
> Handle 0x0016, DMI type 17, 27 bytes  
> Memory Device  
> Array Handle: 0x0014  
> Error Information Handle: No Error  
> Total Width: 72 bits  
> Data Width: 64 bits  
> Size: 256 MB  
> Form Factor: DIMM  
> Set: 1  
> Locator: J6H1  
> Bank Locator: DIMM 2  
> Type: DDR  
> Type Detail: Synchronous  
> Speed: 133 MHz (7.5 ns)  
> Manufacturer: Not Specified  
> Serial Number: Not Specified  
> Asset Tag: Not Specified  
> Part Number: Not Specified
> 
> Handle 0x0017, DMI type 19, 15 bytes  
> Memory Array Mapped Address  
> Starting Address: 0x00000000000  
> Ending Address: 0x0001FFFFFFF  
> Range Size: 512 MB  
> Physical Array Handle: 0x0014  
> Partition Width: 0
> 
> Handle 0x0018, DMI type 20, 19 bytes  
> Memory Device Mapped Address  
> Starting Address: 0x00000000000  
> Ending Address: 0x0000FFFFFFF  
> Range Size: 256 MB  
> Physical Device Handle: 0x0015  
> Memory Array Mapped Address Handle: 0x0017  
> Partition Row Position: Unknown  
> Interleave Position: Unknown  
> Interleaved Data Depth: Unknown
> 
> Handle 0x0019, DMI type 20, 19 bytes  
> Memory Device Mapped Address  
> Starting Address: 0x00010000000  
> Ending Address: 0x0001FFFFFFF  
> Range Size: 256 MB  
> Physical Device Handle: 0x0016  
> Memory Array Mapped Address Handle: 0x0017  
> Partition Row Position: Unknown  
> Interleave Position: Unknown  
> Interleaved Data Depth: Unknown
> 
> Handle 0x001A, DMI type 32, 20 bytes  
> System Boot Information  
> Status:
> 
> Handle 0x001B, DMI type 127, 4 bytes  
> End Of Table
> 
> Handle 0x001C, DMI type 127, 4 bytes  
> End Of Table
> 
> root@Rwk-portable:~# lsusb  
> Bus 001 Device 004: ID 03f0:b402 Hewlett-Packard photosmart 7700 series  
> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub  
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub  
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub  
> Bus 005 Device 004: ID 0424:223a Standard Microsystems Corp. 8-in-1 Card Reader  
> Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  
> Bus 004 Device 002: ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse  
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> 
> root@Rwk-portable:~# lspci  
> 00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)  
> 00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04)  
> 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)  
> 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)  
> 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)  
> 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)  
> 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)  
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)  
> 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Audio Controller (rev 03)  
> 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Modem Controller (rev 03)  
> 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)  
> 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)  
> 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)  
> 01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon Mobility X600]  
> 0a:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)  
> 0a:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)  
> 0a:02.0 Ethernet controller: Linksys, A Division of Cisco Systems [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)  
> 0a:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
> 
> root@Rwk-portable:~# dmesg /var/log/messages |grep acpi  
> [0.000000] ACPI: If «&nbsp;acpi\_apic\_instance=2&nbsp;» works better, notify [linux-acpi@vger.kernel.org](mailto:linux-acpi@vger.kernel.org)  
> [0.000000] ACPI: LAPIC (acpi\_id[0x00] lapic\_id[0x00] enabled)  
> [0.000000] ACPI: LAPIC (acpi\_id[0x01] lapic\_id[0x01] enabled)  
> [0.000000] ACPI: LAPIC\_NMI (acpi\_id[0x00] high edge lint[0x1])  
> [0.000000] ACPI: LAPIC\_NMI (acpi\_id[0x01] high edge lint[0x1])

Voilà, si vous avez des questions…

Merci

---

<div class="post-metadata">

**Author:** ![ricardo](https://www.debian-fr.org/user_avatar/www.debian-fr.org/ricardo/32/3864_2.png) [@ricardo](https://www.debian-fr.org/u/ricardo)\
**Post date:** [Février 20, 2016, 8:13 UTC](https://www.debian-fr.org/t/acpi-power-off-called/20328/2 "2016-02-20T20:13:09Z")

</div>

Fais une recherche car je crois qu’il y a déjà eu des problèmes de ce genre.  
En attendant, et avant d’être dépanné, essaie d’arrêter ta machine en allant sur un tty (Ctrl / alt / F5), logue-toi ‘root’ et tape “halt”, ça passera ptet ?

---

<div class="post-metadata">

**Author:** ![rwk](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/r/ba8739/32.png) [@rwk](https://www.debian-fr.org/u/rwk)\
**Post date:** [Février 20, 2016, 8:13 UTC](https://www.debian-fr.org/t/acpi-power-off-called/20328/3 "2016-02-20T20:13:10Z")

</div>

Bonsoir,

Comme je l’ai écrit ente les lignes 2 et 4 de ce topic :

1- Oui j’ai fais la recherche  
2- Non ça n’a rien donné. D’une part car un sujet a été mis en résolu sans donner “la cause”.  
D’autre part parce que l’autre sujet un peu plus détaillé date de + de 3ans, se termine sur une question non répondue et un problème non résolu.

Du coup, c’est pour ça que je créé mon petit sujet super détaillé héhéhé.

Les commandes halt et reboot ne changent rien. J’ai testé, et toujours même soucis, problème à la fonction acpi\_power\_off called
