# Alerte sur les 2 disques SSD interne: Hard Disk Health Warning **URL:** \ **Category:** Support Debian\ **Created:** [Juillet 8, 2025, 3:20 UTC](https://www.debian-fr.org/t/alerte-sur-les-2-disques-ssd-interne-hard-disk-health-warning/91323 "2025-07-08T15:20:24Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![josephtux](https://www.debian-fr.org/user_avatar/www.debian-fr.org/josephtux/32/3985_2.png) [@josephtux](https://www.debian-fr.org/u/josephtux)\ **Post date:** [Juillet 8, 2025, 3:20 UTC](https://www.debian-fr.org/t/alerte-sur-les-2-disques-ssd-interne-hard-disk-health-warning/91323/1 "2025-07-08T15:20:24Z")
Je ne retrouve pas mon message précédent sur ce sujet. les 2 SSD supportent le même groupe de volume LVM. ``` This message was generated by the smartd daemon running on: host name: Leopard DNS domain: Coucy The following warning/error was logged by the smartd daemon: Device: /dev/nvme1, number of Error Log entries increased from 2380 to 2381 Device info: CT4000P3PSSD8, S/N:2331E86580C6, FW:P9CR40A For details see host's SYSLOG. You can also use the smartctl utility for further investigation. The original message about this issue was sent at Sat May 31 09:20:03 2025 CEST Another message will be sent in 24 hours if the problem persists. ``` Message analogue sur l’autre SSD: ``` This message was generated by the smartd daemon running on: host name: Leopard DNS domain: Coucy The following warning/error was logged by the smartd daemon: Device: /dev/nvme0, number of Error Log entries increased from 2382 to 2383 Device info: CT4000P3PSSD8, S/N:2331E86580DB, FW:P9CR40A For details see host's SYSLOG. You can also use the smartctl utility for further investigation. The original message about this issue was sent at Sat May 31 09:20:03 2025 CEST Another message will be sent in 24 hours if the problem persists. ``` Le syslog est bourré de lignes rouges. voici le log depuis 17h: [syslogDepuis1h.txt](https://www.debian-fr.org/uploads/short-url/wNXO3reiBeTfmfeKVqjc9lJigJO.txt) (810,9 Ko) PS j’ai lancé smartctl comme suggéré par le message: ``` #smartctl -a /dev/nvme1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-37-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT4000P3PSSD8 Serial Number: 2331E86580C6 Firmware Version: P9CR40A PCI Vendor/Subsystem ID: 0xc0a9 IEEE OUI Identifier: 0x00a075 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 4 000 787 030 016 [4,00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 7f6000005d Local Time is: Tue Jul 8 17:27:50 2025 CEST Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x06): Cmd_Eff_Lg Ext_Get_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.00W 0.0000W - 0 0 0 0 0 0 1 + 3.00W 0.0000W - 0 0 0 0 0 0 2 + 1.50W 0.0000W - 0 0 0 0 0 0 3 - 0.0250W 0.0000W - 3 3 3 3 5000 1900 4 - 0.0030W - - 4 4 4 4 13000 100000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 1 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 33 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 1% Data Units Read: 7 543 910 [3,86 TB] Data Units Written: 16 938 534 [8,67 TB] Host Read Commands: 19 856 500 Host Write Commands: 100 378 167 Controller Busy Time: 806 Power Cycles: 208 Power On Hours: 12 641 Unsafe Shutdowns: 78 Media and Data Integrity Errors: 0 Error Information Log Entries: 2 382 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 33 Celsius Temperature Sensor 2: 32 Celsius Temperature Sensor 8: 33 Celsius Error Information (NVMe Log 0x01, 16 of 16 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 2382 0 0x700a 0x4005 0x028 0 0 - ``` — sur l’autre SSD: ``` #smartctl -x /dev/nvme0 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-37-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT4000P3PSSD8 Serial Number: 2331E86580DB Firmware Version: P9CR40A PCI Vendor/Subsystem ID: 0xc0a9 IEEE OUI Identifier: 0x00a075 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 4 000 787 030 016 [4,00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 7f60000050 Local Time is: Tue Jul 8 17:30:36 2025 CEST Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x06): Cmd_Eff_Lg Ext_Get_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.00W 0.0000W - 0 0 0 0 0 0 1 + 3.00W 0.0000W - 0 0 0 0 0 0 2 + 1.50W 0.0000W - 0 0 0 0 0 0 3 - 0.0250W 0.0000W - 3 3 3 3 5000 1900 4 - 0.0030W - - 4 4 4 4 13000 100000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 1 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 31 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 1% Data Units Read: 58 704 626 [30,0 TB] Data Units Written: 22 431 932 [11,4 TB] Host Read Commands: 279 293 106 Host Write Commands: 339 747 512 Controller Busy Time: 2 992 Power Cycles: 208 Power On Hours: 12 632 Unsafe Shutdowns: 78 Media and Data Integrity Errors: 0 Error Information Log Entries: 2 383 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 31 Celsius Temperature Sensor 2: 35 Celsius Temperature Sensor 8: 31 Celsius Error Information (NVMe Log 0x01, 16 of 16 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 2383 0 0x8001 0x4005 0x028 0 0 - ```