# Analyse disque dur **URL:** \ **Category:** Support Debian\ **Created:** [Avril 6, 2023, 12:08 UTC](https://www.debian-fr.org/t/analyse-disque-dur/88089 "2023-04-06T12:08:14Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![toto691](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/t/6bbea6/32.png) [@toto691](https://www.debian-fr.org/u/toto691)\ **Post date:** [Avril 6, 2023, 12:08 UTC](https://www.debian-fr.org/t/analyse-disque-dur/88089/1 "2023-04-06T12:08:14Z")
Bonjour, J’entreprends le dépoussierage de plusieurs disques durs : pouvez-vous m’aider à me confirmer qu’ils sont bons pour la casse ou non ? Voici un premier rapport. J’ai lu que si le ‹ remaining › est à 00% après un self-test alors le disque n’est pas mort. Confirmez-vous ? ```nohighlight sudo smartctl --all /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-58-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST380013AS Serial Number: 5MR02MHD Firmware Version: 8.12 User Capacity: 80 000 000 000 bytes [80,0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Thu Apr 6 14:03:24 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 47) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 058 050 006 Pre-fail Always - 190722777 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1051 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 247535861 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4283 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1204 194 Temperature_Celsius 0x0022 024 046 000 Old_age Always - 24 (0 13 0 0 0) 195 Hardware_ECC_Recovered 0x001a 058 050 000 Old_age Always - 190722777 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short captive Completed without error 00% 1803 - # 2 Short captive Completed without error 00% 14 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ``` ---
**Author:** ![Almtesh](https://www.debian-fr.org/user_avatar/www.debian-fr.org/almtesh/32/10312_2.png) [@Almtesh](https://www.debian-fr.org/u/Almtesh)\ **Post date:** [Avril 6, 2023, 3:05 UTC](https://www.debian-fr.org/t/analyse-disque-dur/88089/2 "2023-04-06T15:05:47Z")
> [@toto691](#): > > J’ai lu que si le ‹ remaining › est à 00% après un self-test alors le disque n’est pas mort. Confirmez-vous ? Non, ça veut juste dire que le dernier n’a pas eu d’erreur, ça ne veut rien dire de plus. Si tu veux avoir des données plus récente, n’hésite pas à lancer un auto-test. ---
**Author:** ![crustyourmind](https://www.debian-fr.org/user_avatar/www.debian-fr.org/crustyourmind/32/2955_2.png) [@crustyourmind](https://www.debian-fr.org/u/crustyourmind)\ **Post date:** [Avril 6, 2023, 8:41 UTC](https://www.debian-fr.org/t/analyse-disque-dur/88089/3 "2023-04-06T20:41:06Z")
Bonsoir Par contre ces données ne sont pas un bon signe par rapport à la santé du disque ``` 5 Reallocated_Sector_Ct ... 197 Current_Pending_Sector ``` ---
**Author:** ![Almtesh](https://www.debian-fr.org/user_avatar/www.debian-fr.org/almtesh/32/10312_2.png) [@Almtesh](https://www.debian-fr.org/u/Almtesh)\ **Post date:** [Avril 7, 2023, 5:10 UTC](https://www.debian-fr.org/t/analyse-disque-dur/88089/4 "2023-04-07T05:10:21Z")
> [@crustyourmind](#): > > Par contre ces données ne sont pas un bon signe par rapport à la santé du disque > > ```auto > 5 Reallocated_Sector_Ct > ... > 197 Current_Pending_Sector > > ``` 5 et 197 ne sont pas les valeurs, mais les identifiants, les valeurs sont respectivement 0 et 0, ce qui est très bien, surtout pour un disque qui n’a tourné que 4283 heures (modulo 65536). ---
**Author:** ![crustyourmind](https://www.debian-fr.org/user_avatar/www.debian-fr.org/crustyourmind/32/2955_2.png) [@crustyourmind](https://www.debian-fr.org/u/crustyourmind)\ **Post date:** [Avril 7, 2023, 6:06 UTC](https://www.debian-fr.org/t/analyse-disque-dur/88089/5 "2023-04-07T06:06:57Z")
Oui tout à fait, je me suis trompé de colonne entre VALUE et RAW\_VALUE ```auto ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 ``` Autant pour moi 😉 Désolé