Oui.
Note que l’archive libmodules doit être déplier sous /lib/modules…, l’autre sous /lib
root@serveur-debian:/lib# ls
bridge-utils libnss_mdns4_minimal.so.2
cpp libnss_mdns4.so.2
crda libnss_mdns6_minimal.so.2
discover libnss_mdns6.so.2
firmware libnss_mdns_minimal.so.2
i386-linux-gnu libnss_mdns.so.2
init libxtables.so.7
klibc-_p1fb7QsHmNN-bA0jN63AqBDMvM.so libxtables.so.7.0.0
ld-linux.so.2 lsb
libfirmware.tgz modprobe.d
libip4tc.so.0 modules
libip4tc.so.0.1.0 oss-compat
libip6tc.so.0 security
libip6tc.so.0.1.0 systemd
libipq.so.0 terminfo
libipq.so.0.0.0 udev
libiptc.so.0 xtables
libiptc.so.0.0.0
J’ai pas le sentiment qu’elle est décompressée !?!
tar xzf libmodules.tgz
tar (child): libmodules.tgz : open impossible: Aucun fichier ou dossier de ce type
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
Je n’étais pas dans le répertoire 
Un peu fatigué ce soir 
J’ai merdouillé !!! J’ai oublié de renommer 3.10.1-fb-aufs en 3.10.1-fb-aufs.old avant de déplier l’archive libmodules !
Voilà ce que c’est de faire des manips quand on est fatigué !
Qu’est ce que je fais ?
Pas bien grave, ça devrait fonctionner. Pour faire marche arrière il te suffira de récupérer l’arboresence du paquet. Avais tu des modules dkms (nvidia, virtualbox, etc)?
La premièere installe des firmwares dans /lib/firmwares, la deuxième déploie les nouveaux modules…
Je ne comprends pas ce qu’il faudrait faire. Mais on verra le moment venu. Si moment il y a ?!
Je ne pense pas mais d’un autre côté je n’en suis pas certain non plus. Y a t il un moyen de vérifier ?
Là encore tu verras, il te suffira de réinstaller le paquet linux-image si il y a un souci.
Pas de problèmes de rdémarrage.
Résultats :
Rien
# dmesg | grep cx231xx
[ 24.956779] usbcore: registered new interface driver cx231xx
root@serveur-debian:~# lsmod
videobuf_vmalloc 12635 1 cx231xx
cx2341x 21285 1 cx231xx
videobuf_core 17600 2 cx231xx,videobuf_vmalloc
pwc 67508 0
rc_core 18074 1 cx231xx
videobuf2_vmalloc 12744 1 pwc
videobuf2_memops 12471 1 videobuf2_vmalloc
videobuf2_core 34932 1 pwc
v4l2_common 12895 3 pwc,cx2341x,cx231xx
videodev 91379 5 pwc,cx2341x,cx231xx,v4l2_common,videobuf2_core
media 17868 1 videodev
i2c_core 19505 9 drm,lm63,cx231xx,drm_kms_helper,i2c_algo_bit,i2c_viapro,v4l2_common,radeon,videodev
usbcore 110376 8 pwc,cx231xx,uhci_hcd,snd_usb_audio,usb_storage,snd_usbmidi_lib,ehci_hcd,ehci_pci
floppy 48165 0
J’ai viré tout ce qui ne concerné pas cx231xx ou cx2341xx dans lsmod. Il y a beaucoup plus de lignes qe lors du précédent !
Est ce que ça marche?
Je ne suis pas chez moi. Ai-je un moyen de vérifier que çà marche à distance ?
Regarde ls -l /dev/video*
ls -l /dev/video*
crw-rw---T 1 root video 81, 0 mars 30 10:28 /dev/video0
J’ai une cam de branchée et qui tourne avec pwc. Je pense que c’est celle-là qui est identifiée.
Mais je n’en suis pas certain non plus.
Bon, il faut essayer…
Tests de branchements :
1/les deux cams branchées ; redémarrage du serveur.
# ls -l /dev/video*
crw-rw---T 1 root video 81, 0 avril 1 17:35 /dev/video0
2/Serveur en marche : débranchement de la cam qui tourne sous pwc. Celle qui nous intéresse est donc branchée.
# ls -l /dev/video*
ls: impossible d'accéder à /dev/video*: Aucun fichier ou dossier de ce type
3/ Serveur en marche : branchement de la cam qui tourne sous pwc.
# ls -l /dev/video*
crw-rw---T 1 root video 81, 0 avril 1 17:40 /dev/video0
Vérification que /dev/video0 est bien attribuée à cette cam :
#dmesg
[ 354.084158] usb 5-1.4.4: new full-speed USB device number 10 using ehci-pci
[ 354.309315] usb 5-1.4.4: New USB device found, idVendor=0471, idProduct=0329
[ 354.309479] usb 5-1.4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 354.309653] usb 5-1.4.4: SerialNumber: 01690000C6480450
[ 354.311210] pwc: Philips SPC 900NC USB webcam detected.
[ 354.895685] pwc: Registered as video0.
J’en conclue que le pilote cx231xx ou/et cx2341x ne fonctionne toujours pas.
Que donne le dmesg et le syslog? Il te suffit de dérrarer le serveur, puis de brancher la caméra (pas la pwc, l’autre) et de voir ce qu’il se passe (syslog et dmesg). Laisse l’autre caméra de coté.
C’est justement ce que j’ai fait. Mais je n’ai pas pensé à aller voir dans le syslog. J’y vais et je poste.
J’ai çà dans le syslog :
Apr 1 17:35:54 serveur-debian kernel: [ 0.858080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Apr 1 17:35:54 serveur-debian kernel: [ 0.858135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 1 17:35:54 serveur-debian kernel: [ 0.858195] usb usb1: Product: UHCI Host Controller
Apr 1 17:35:54 serveur-debian kernel: [ 0.858249] usb usb1: Manufacturer: Linux 3.10.1-fb-aufs uhci_hcd
Apr 1 17:35:54 serveur-debian kernel: [ 0.860532] usb usb1: SerialNumber: 0000:00:10.0
Apr 1 17:35:54 serveur-debian kernel: [ 0.860791] hub 1-0:1.0: USB hub found
Apr 1 17:35:54 serveur-debian kernel: [ 0.860849] hub 1-0:1.0: 2 ports detected
Apr 1 17:35:54 serveur-debian kernel: [ 0.861058] libata version 3.00 loaded.
Apr 1 17:35:54 serveur-debian kernel: [ 0.862308] ahci 0000:06:00.0: version 3.0
Apr 1 17:35:54 serveur-debian kernel: [ 0.864057] uhci_hcd 0000:00:10.1: UHCI Host Controller
Apr 1 17:35:54 serveur-debian kernel: [ 0.864128] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Apr 1 17:35:54 serveur-debian kernel: [ 0.864240] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000a800
Apr 1 17:35:54 serveur-debian kernel: [ 0.864350] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Apr 1 17:35:54 serveur-debian kernel: [ 0.864405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 1 17:35:54 serveur-debian kernel: [ 0.864465] usb usb2: Product: UHCI Host Controller
Apr 1 17:35:54 serveur-debian kernel: [ 0.864519] usb usb2: Manufacturer: Linux 3.10.1-fb-aufs uhci_hcd
Apr 1 17:35:54 serveur-debian kernel: [ 0.864573] usb usb2: SerialNumber: 0000:00:10.1
Apr 1 17:35:54 serveur-debian kernel: [ 0.865473] hub 2-0:1.0: USB hub found
Apr 1 17:35:54 serveur-debian kernel: [ 0.865531] hub 2-0:1.0: 2 ports detected
Apr 1 17:35:54 serveur-debian kernel: [ 0.865803] uhci_hcd 0000:00:10.2: UHCI Host Controller
Apr 1 17:35:54 serveur-debian kernel: [ 0.865862] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Apr 1 17:35:54 serveur-debian kernel: [ 0.865963] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000a880
Apr 1 17:35:54 serveur-debian kernel: [ 0.866061] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Apr 1 17:35:54 serveur-debian kernel: [ 0.866116] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 1 17:35:54 serveur-debian kernel: [ 0.866175] usb usb3: Product: UHCI Host Controller
Apr 1 17:35:54 serveur-debian kernel: [ 0.866229] usb usb3: Manufacturer: Linux 3.10.1-fb-aufs uhci_hcd
Apr 1 17:35:54 serveur-debian kernel: [ 0.866283] usb usb3: SerialNumber: 0000:00:10.2
Apr 1 17:35:54 serveur-debian kernel: [ 0.866480] hub 3-0:1.0: USB hub found
Apr 1 17:35:54 serveur-debian kernel: [ 0.866537] hub 3-0:1.0: 2 ports detected
Apr 1 17:35:54 serveur-debian kernel: [ 0.866863] uhci_hcd 0000:00:10.3: UHCI Host Controller
Apr 1 17:35:54 serveur-debian kernel: [ 0.866924] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Apr 1 17:35:54 serveur-debian kernel: [ 0.867025] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000ac00
Apr 1 17:35:54 serveur-debian kernel: [ 0.867125] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr 1 17:35:54 serveur-debian kernel: [ 0.867180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 1 17:35:54 serveur-debian kernel: [ 0.867240] usb usb4: Product: UHCI Host Controller
Apr 1 17:35:54 serveur-debian kernel: [ 0.867294] usb usb4: Manufacturer: Linux 3.10.1-fb-aufs uhci_hcd
Apr 1 17:35:54 serveur-debian kernel: [ 0.867348] usb usb4: SerialNumber: 0000:00:10.3
Apr 1 17:35:54 serveur-debian kernel: [ 0.867549] hub 4-0:1.0: USB hub found
Apr 1 17:35:54 serveur-debian kernel: [ 0.867605] hub 4-0:1.0: 2 ports detected
çà aussi :
Apr 1 17:35:54 serveur-debian kernel: [ 1.760026] usb 2-1: new full-speed USB device number 2 using uhci_hcd
Apr 1 17:35:54 serveur-debian kernel: [ 1.944346] usb 2-1: New USB device found, idVendor=1d19, idProduct=6105
Apr 1 17:35:54 serveur-debian kernel: [ 1.944408] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 1 17:35:54 serveur-debian kernel: [ 1.944464] usb 2-1: Product: ITE Video Capture Device
Apr 1 17:35:54 serveur-debian kernel: [ 1.944518] usb 2-1: Manufacturer: Afa Technologies Inc.
Apr 1 17:35:54 serveur-debian kernel: [ 1.944571] usb 2-1: SerialNumber: AF0102020700001
çà, çà à l’air intéressant :
Apr 1 17:35:54 serveur-debian kernel: [ 26.409555] Linux video capture interface: v2.00
Apr 1 17:35:54 serveur-debian kernel: [ 26.409620] WARNING: You are using an experimental version of the media stack.
Apr 1 17:35:54 serveur-debian kernel: [ 26.409620] As the driver is backported to an older kernel, it doesn't offer
Apr 1 17:35:54 serveur-debian kernel: [ 26.409620] enough quality for its usage in production.
Apr 1 17:35:54 serveur-debian kernel: [ 26.409620] Use it with care.
Apr 1 17:35:54 serveur-debian kernel: [ 26.409620] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr 1 17:35:54 serveur-debian kernel: [ 26.409620] 8432164ddf7bfe40748ac49995356ab4dfda43b7 [media] Sensoray 2255 uses videobuf2
Apr 1 17:35:54 serveur-debian kernel: [ 26.409620] df065b373f882c4efc396afa1f31cd8afedab356 [media] adv7180: free an interrupt on failure paths in init_device()
Apr 1 17:35:54 serveur-debian kernel: [ 26.409620] 320c63870941ef3bb6e08e979d894ad6d51340d7 [media] e4000: make VIDEO_V4L2 dependency optional
Tu m’avais pas parlé de >drm< ???
Apr 1 17:35:54 serveur-debian kernel: [ 26.454621] [drm] radeon: ring at 0x0000000010001000
Apr 1 17:35:54 serveur-debian kernel: [ 26.454711] [drm] ring test succeeded in 7 usecs
Apr 1 17:35:54 serveur-debian kernel: [ 26.454962] [drm] ib test succeeded in 0 usecs
Apr 1 17:35:54 serveur-debian kernel: [ 26.455363] [drm] Radeon Display Connectors
Apr 1 17:35:54 serveur-debian kernel: [ 26.455417] [drm] Connector 0:
Apr 1 17:35:54 serveur-debian kernel: [ 26.455469] [drm] DVI-I-1
Apr 1 17:35:54 serveur-debian kernel: [ 26.455520] [drm] HPD1
Apr 1 17:35:54 serveur-debian kernel: [ 26.455573] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Apr 1 17:35:54 serveur-debian kernel: [ 26.455631] [drm] Encoders:
Apr 1 17:35:54 serveur-debian kernel: [ 26.455683] [drm] CRT1: INTERNAL_KLDSCP_DAC1
Apr 1 17:35:54 serveur-debian kernel: [ 26.455736] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
Apr 1 17:35:54 serveur-debian kernel: [ 26.455788] [drm] Connector 1:
Apr 1 17:35:54 serveur-debian kernel: [ 26.455840] [drm] SVIDEO-1
Apr 1 17:35:54 serveur-debian kernel: [ 26.455891] [drm] Encoders:
Apr 1 17:35:54 serveur-debian kernel: [ 26.455943] [drm] TV1: INTERNAL_KLDSCP_DAC2
Apr 1 17:35:54 serveur-debian kernel: [ 26.455995] [drm] Connector 2:
Apr 1 17:35:54 serveur-debian kernel: [ 26.456074] [drm] DVI-I-2
Apr 1 17:35:54 serveur-debian kernel: [ 26.456125] [drm] HPD2
Apr 1 17:35:54 serveur-debian kernel: [ 26.456178] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
Apr 1 17:35:54 serveur-debian kernel: [ 26.456236] [drm] Encoders:
Apr 1 17:35:54 serveur-debian kernel: [ 26.456287] [drm] CRT2: INTERNAL_KLDSCP_DAC2
Apr 1 17:35:54 serveur-debian kernel: [ 26.456340] [drm] DFP3: INTERNAL_LVTM1
Apr 1 17:35:54 serveur-debian kernel: [ 26.456400] [drm] Possible lm63 thermal controller at 0x4c
Apr 1 17:35:54 serveur-debian kernel: [ 26.460247] powernow-k8: fid 0xa (1800 MHz), vid 0x8
Apr 1 17:35:54 serveur-debian kernel: [ 26.460339] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
Apr 1 17:35:54 serveur-debian kernel: [ 26.460660] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
Apr 1 17:35:54 serveur-debian kernel: [ 26.564418] radeon 0000:02:00.0: No connectors reported connected with modes
Apr 1 17:35:54 serveur-debian kernel: [ 26.564482] [drm] Cannot find any crtc or sizes - going 1024x768
Apr 1 17:35:54 serveur-debian kernel: [ 26.567484] [drm] fb mappable at 0xD00C0000
Apr 1 17:35:54 serveur-debian kernel: [ 26.567537] [drm] vram apper at 0xD0000000
Apr 1 17:35:54 serveur-debian kernel: [ 26.567590] [drm] size 3145728
Apr 1 17:35:54 serveur-debian kernel: [ 26.567641] [drm] fb depth is 24
Apr 1 17:35:54 serveur-debian kernel: [ 26.567692] [drm] pitch is 4096
Apr 1 17:35:54 serveur-debian kernel: [ 26.567953] fbcon: radeondrmfb (fb0) is primary device
Apr 1 17:35:54 serveur-debian kernel: [ 26.577698] Console: switching to colour frame buffer device 128x48
Apr 1 17:35:54 serveur-debian kernel: [ 26.584053] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
Apr 1 17:35:54 serveur-debian kernel: [ 26.584132] radeon 0000:02:00.0: registered panic notifier
Apr 1 17:35:54 serveur-debian kernel: [ 26.584302] [drm] Initialized radeon 2.33.0 20080528 for 0000:02:00.0 on minor 0
Apr 1 17:35:54 serveur-debian kernel: [ 26.794578] WARNING: You are using an experimental version of the media stack.
Apr 1 17:35:54 serveur-debian kernel: [ 26.794578] As the driver is backported to an older kernel, it doesn't offer
Apr 1 17:35:54 serveur-debian kernel: [ 26.794578] enough quality for its usage in production.
Apr 1 17:35:54 serveur-debian kernel: [ 26.794578] Use it with care.
Apr 1 17:35:54 serveur-debian kernel: [ 26.794578] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr 1 17:35:54 serveur-debian kernel: [ 26.794578] 8432164ddf7bfe40748ac49995356ab4dfda43b7 [media] Sensoray 2255 uses videobuf2
Apr 1 17:35:54 serveur-debian kernel: [ 26.794578] df065b373f882c4efc396afa1f31cd8afedab356 [media] adv7180: free an interrupt on failure paths in init_device()
Apr 1 17:35:54 serveur-debian kernel: [ 26.794578] 320c63870941ef3bb6e08e979d894ad6d51340d7 [media] e4000: make VIDEO_V4L2 dependency optional
Apr 1 17:35:54 serveur-debian kernel: [ 26.820961] cfg80211: Calling CRDA to update world regulatory domain
Ya un moyen de purger les logs pour n’avoir que les derniers ?
J’ai démarré le serveur, cam branchée.
Je joins le fichier dmesg.txt
Je cherche le moyen de faire pareil pour le fichier syslog mais je ne trouve pas la commande.
# /var/log/syslog > syslog1.txt
bash: /var/log/syslog: Permission non accordée
Dans le syslog, j’ai :
Apr 2 08:32:25 serveur-debian kernel: [ 24.234420] Linux video capture interface: v2.00
Apr 2 08:32:25 serveur-debian kernel: [ 24.234496] WARNING: You are using an experimental version of the media stack.
Apr 2 08:32:25 serveur-debian kernel: [ 24.234496] As the driver is backported to an older kernel, it doesn't offer
Apr 2 08:32:25 serveur-debian kernel: [ 24.234496] enough quality for its usage in production.
Apr 2 08:32:25 serveur-debian kernel: [ 24.234496] Use it with care.
Apr 2 08:32:25 serveur-debian kernel: [ 24.234496] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr 2 08:32:25 serveur-debian kernel: [ 24.234496] 8432164ddf7bfe40748ac49995356ab4dfda43b7 [media] Sensoray 2255 uses videobuf2
Apr 2 08:32:25 serveur-debian kernel: [ 24.234496] df065b373f882c4efc396afa1f31cd8afedab356 [media] adv7180: free an interrupt on failure paths in init_device()
Apr 2 08:32:25 serveur-debian kernel: [ 24.234496] 320c63870941ef3bb6e08e979d894ad6d51340d7 [media] e4000: make VIDEO_V4L2 dependency optional
Extinction du serveur. Débranchement de la cam. Allumage du serveur. Branchement de la cam.
#tail -f /var/log/syslog
Apr 2 10:04:12 serveur-debian kernel: [ 2253.108043] usb 5-2: new high-speed USB device number 2 using ehci-pci
Apr 2 10:04:12 serveur-debian kernel: [ 2253.246323] usb 5-2: New USB device found, idVendor=1d19, idProduct=6105
Apr 2 10:04:12 serveur-debian kernel: [ 2253.246484] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 2 10:04:12 serveur-debian kernel: [ 2253.246647] usb 5-2: Product: ITE Video Capture Device
Apr 2 10:04:12 serveur-debian kernel: [ 2253.246761] usb 5-2: Manufacturer: Afa Technologies Inc.
Apr 2 10:04:12 serveur-debian kernel: [ 2253.246877] usb 5-2: SerialNumber: AF0102020700001
Apr 2 10:04:12 serveur-debian kernel: [ 2253.302644] media: Linux media interface: v0.10
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314638] Linux video capture interface: v2.00
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314763] WARNING: You are using an experimental version of the media stack.
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314763] As the driver is backported to an older kernel, it doesn't offer
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314763] enough quality for its usage in production.
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314763] Use it with care.
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314763] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314763] 8432164ddf7bfe40748ac49995356ab4dfda43b7 [media] Sensoray 2255 uses videobuf2
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314763] df065b373f882c4efc396afa1f31cd8afedab356 [media] adv7180: free an interrupt on failure paths in init_device()
Apr 2 10:04:12 serveur-debian kernel: [ 2253.314763] 320c63870941ef3bb6e08e979d894ad6d51340d7 [media] e4000: make VIDEO_V4L2 dependency optional
Apr 2 10:04:12 serveur-debian kernel: [ 2253.331379] WARNING: You are using an experimental version of the media stack.
Apr 2 10:04:12 serveur-debian kernel: [ 2253.331379] As the driver is backported to an older kernel, it doesn't offer
Apr 2 10:04:12 serveur-debian kernel: [ 2253.331379] enough quality for its usage in production.
Apr 2 10:04:12 serveur-debian kernel: [ 2253.331379] Use it with care.
Apr 2 10:04:12 serveur-debian kernel: [ 2253.331379] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Apr 2 10:04:12 serveur-debian kernel: [ 2253.331379] 8432164ddf7bfe40748ac49995356ab4dfda43b7 [media] Sensoray 2255 uses videobuf2
Apr 2 10:04:12 serveur-debian kernel: [ 2253.331379] df065b373f882c4efc396afa1f31cd8afedab356 [media] adv7180: free an interrupt on failure paths in init_device()
Apr 2 10:04:12 serveur-debian kernel: [ 2253.331379] 320c63870941ef3bb6e08e979d894ad6d51340d7 [media] e4000: make VIDEO_V4L2 dependency optional
Apr 2 10:04:12 serveur-debian kernel: [ 2253.386016] usbcore: registered new interface driver cx231xx
#dmesg
[ 2253.108043] usb 5-2: new high-speed USB device number 2 using ehci-pci
[ 2253.246323] usb 5-2: New USB device found, idVendor=1d19, idProduct=6105
[ 2253.246484] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2253.246647] usb 5-2: Product: ITE Video Capture Device
[ 2253.246761] usb 5-2: Manufacturer: Afa Technologies Inc.
[ 2253.246877] usb 5-2: SerialNumber: AF0102020700001
[ 2253.302644] media: Linux media interface: v0.10
[ 2253.314638] Linux video capture interface: v2.00
[ 2253.314763] WARNING: You are using an experimental version of the media stack.
[ 2253.314763] As the driver is backported to an older kernel, it doesn't offer
[ 2253.314763] enough quality for its usage in production.
[ 2253.314763] Use it with care.
[ 2253.314763] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 2253.314763] 8432164ddf7bfe40748ac49995356ab4dfda43b7 [media] Sensoray 2255 uses videobuf2
[ 2253.314763] df065b373f882c4efc396afa1f31cd8afedab356 [media] adv7180: free an interrupt on failure paths in init_device()
[ 2253.314763] 320c63870941ef3bb6e08e979d894ad6d51340d7 [media] e4000: make VIDEO_V4L2 dependency optional
[ 2253.331379] WARNING: You are using an experimental version of the media stack.
[ 2253.331379] As the driver is backported to an older kernel, it doesn't offer
[ 2253.331379] enough quality for its usage in production.
[ 2253.331379] Use it with care.
[ 2253.331379] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 2253.331379] 8432164ddf7bfe40748ac49995356ab4dfda43b7 [media] Sensoray 2255 uses videobuf2
[ 2253.331379] df065b373f882c4efc396afa1f31cd8afedab356 [media] adv7180: free an interrupt on failure paths in init_device()
[ 2253.331379] 320c63870941ef3bb6e08e979d894ad6d51340d7 [media] e4000: make VIDEO_V4L2 dependency optional
[ 2253.386016] usbcore: registered new interface driver cx231xx
dmesg1.txt (53.2 KB)