# coincé sur un noyau **URL:** \ **Category:** Support Debian\ **Created:** [Février 20, 2016, 6:23 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257 "2016-02-20T18:23:54Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:23 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/1 "2016-02-20T18:23:54Z")
bonjour à tous Voilà impossible d’utiliser un linux-image autre que uname -r : 2.6.25-2-686 revenir au noyau etch ou lenny, voici un des messages d’erreur au chargement du noyau : hdd : drive not ready for command et ça coince au chargement. Je n’ai pas trouvé de piste qui puisse m’éclairer. Avez-vous une idée ? ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:23 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/2 "2016-02-20T18:23:55Z")
dans /dev je n’ai pas de hdd uniquement des sda et sdc pourquoi ? ---
**Author:** ![alexmath](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/a/8edcca/32.png) [@alexmath](https://www.debian-fr.org/u/alexmath)\ **Post date:** [Février 20, 2016, 6:23 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/3 "2016-02-20T18:23:58Z")
depuis le 2.6.22 au moins (voir peut etre avant) tous les peripheriques ide et sata sont nommés par le noyau sd\* ---
**Author:** ![fran.b](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/f/d78d45/32.png) [@fran.b](https://www.debian-fr.org/u/fran.b)\ **Post date:** [Février 20, 2016, 6:23 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/4 "2016-02-20T18:23:58Z")
hdd est un CDROM? Il faut peut être dans ce cas regarder les modules chargés. Que dit dmesg? ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/5 "2016-02-20T18:24:08Z")
voici mon dmesg, je ne vois rien en ce qui concerne hdd mes 2 lecteurs sont apparemment reconnus [0.000000] Initializing cgroup subsys cpuset [0.000000] Linux version 2.6.25-2-686 (Debian 2.6.25-7) ([maks@debian.org](mailto:maks@debian.org)) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008 [0.000000] BIOS-provided physical RAM map: [0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [0.000000] BIOS-e820: 0000000000100000 - 0000000017ffc000 (usable) [0.000000] BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data) [0.000000] BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS) [0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [0.000000] 0MB HIGHMEM available. [0.000000] 383MB LOWMEM available. [0.000000] Scan SMP from c0000000 for 1024 bytes. [0.000000] Scan SMP from c009fc00 for 1024 bytes. [0.000000] Scan SMP from c00f0000 for 65536 bytes. [0.000000] Scan SMP from c009fc00 for 1024 bytes. [0.000000] Entering add\_active\_range(0, 0, 98300) 0 entries of 256 used [0.000000] Zone PFN ranges: [0.000000] DMA 0 -\> 4096 [0.000000] Normal 4096 -\> 98300 [0.000000] HighMem 98300 -\> 98300 [0.000000] Movable zone start PFN for each node [0.000000] early\_node\_map[1] active PFN ranges [0.000000] 0: 0 -\> 98300 [0.000000] On node 0 totalpages: 98300 [0.000000] DMA zone: 32 pages used for memmap [0.000000] DMA zone: 0 pages reserved [0.000000] DMA zone: 4064 pages, LIFO batch:0 [0.000000] Normal zone: 735 pages used for memmap [0.000000] Normal zone: 93469 pages, LIFO batch:31 [0.000000] HighMem zone: 0 pages used for memmap [0.000000] Movable zone: 0 pages used for memmap [0.000000] DMI 2.3 present. [0.000000] ACPI: RSDP 000F5690, 0014 (r0 ASUS ) [0.000000] ACPI: RSDT 17FFC000, 0030 (r1 ASUS P4S533-X 42302E31 MSFT 31313031) [0.000000] ACPI: FACP 17FFC0C0, 0074 (r1 ASUS P4S533-X 42302E31 MSFT 31313031) [0.000000] ACPI: DSDT 17FFC134, 287C (r1 ASUS P4S533-X 1000 MSFT 100000B) [0.000000] ACPI: FACS 17FFF000, 0040 [0.000000] ACPI: BOOT 17FFC030, 0028 (r1 ASUS P4S533-X 42302E31 MSFT 31313031) [0.000000] ACPI: APIC 17FFC058, 005A (r1 ASUS P4S533-X 42302E31 MSFT 31313031) [0.000000] ACPI: PM-Timer IO Port: 0xe408 [0.000000] ACPI: Local APIC address 0xfee00000 [0.000000] ACPI: LAPIC (acpi\_id[0x00] lapic\_id[0x00] enabled) [0.000000] Processor #0 15:0 APIC version 20 [0.000000] ACPI: LAPIC\_NMI (acpi\_id[0x00] high edge lint[0x1]) [0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi\_base[0]) [0.000000] IOAPIC[0]: apic\_id 2, version 128, address 0xfec00000, GSI 0-23 [0.000000] ACPI: INT\_SRC\_OVR (bus 0 bus\_irq 0 global\_irq 2 dfl edge) [0.000000] ACPI: INT\_SRC\_OVR (bus 0 bus\_irq 9 global\_irq 20 low level) [0.000000] ACPI: IRQ0 used by override. [0.000000] ACPI: IRQ2 used by override. [0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [0.000000] Using ACPI (MADT) for SMP configuration information [0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e6c00000) [0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97533 [0.000000] Kernel command line: root=/dev/sda3 ro quiet vga=792 [0.000000] mapped APIC to ffffb000 (fee00000) [0.000000] mapped IOAPIC to ffffa000 (fec00000) [0.000000] Enabling fast FPU save and restore… done. [0.000000] Enabling unmasked SIMD FPU exception support… done. [0.000000] Initializing CPU#0 [0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [0.000000] Detected 1680.518 MHz processor. [0.000044] Console: colour dummy device 80x25 [0.000050] console [tty0] enabled [0.000632] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [0.001270] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [0.004000] Memory: 380232k/393200k available (1753k kernel code, 12364k reserved, 728k data, 252k init, 0k highmem) [0.004000] virtual kernel memory layout: [0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [0.004000] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB) [0.004000] lowmem : 0xc0000000 - 0xd7ffc000 ( 383 MB) [0.004000] .init : 0xc0375000 - 0xc03b4000 ( 252 kB) [0.004000] .data : 0xc02b649a - 0xc036c640 ( 728 kB) [0.004000] .text : 0xc0100000 - 0xc02b649a (1753 kB) [0.004000] Checking if this processor honours the WP bit even in supervisor mode…Ok. [0.004000] CPA: page pool initialized 1 of 1 pages preallocated [0.084009] Calibrating delay using timer specific routine… 3365.02 BogoMIPS (lpj=6730046) [0.084084] Security Framework initialized [0.084092] SELinux: Disabled at boot. [0.084098] Capability LSM initialized [0.084125] Mount-cache hash table entries: 512 [0.084390] Initializing cgroup subsys ns [0.084399] Initializing cgroup subsys cpuacct [0.084436] CPU: Trace cache: 12K uops, L1 D cache: 8K [0.084441] CPU: L2 cache: 256K [0.084445] CPU: Hyper-Threading is disabled [0.084451] Intel machine check architecture supported. [0.084460] Intel machine check reporting enabled on CPU#0. [0.084465] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available [0.084471] CPU0: Thermal monitoring enabled [0.084484] Compat vDSO mapped to ffffe000. [0.084499] Checking ‘hlt’ instruction… OK. [0.100497] SMP alternatives: switching to UP code [0.103711] Freeing SMP alternatives: 16k freed [0.103721] ACPI: Core revision 20070126 [0.110651] CPU0: Intel® Pentium® 4 CPU 1400MHz stepping 0a [0.110710] Total of 1 processors activated (3365.02 BogoMIPS). [0.110813] ENABLING IO-APIC IRQs [0.111009] …TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [0.152009] Brought up 1 CPUs [0.152009] CPU0 attaching sched-domain: [0.152009] domain 0: span 01 [0.152009] groups: 01 [0.152009] net\_namespace: 548 bytes [0.152009] Booting paravirtualized kernel on bare hardware [0.152009] NET: Registered protocol family 16 [0.152009] ACPI: bus type pci registered [0.152009] PCI: PCI BIOS revision 2.10 entry at 0xf1060, last bus=1 [0.152009] PCI: Using configuration type 1 [0.152009] Setting up standard PCI resources [0.157336] ACPI: EC: Look up EC in DSDT [0.167568] ACPI: Interpreter enabled [0.167576] ACPI: (supports S0 S1 S3 S4 S5) [0.167604] ACPI: Using IOAPIC for interrupt routing [0.188621] ACPI: PCI Root Bridge [PCI0] (0000:00) [0.188905] pci 0000:00:02.0: Enabling SiS 96x SMBus [0.189615] ACPI: PCI Interrupt Routing Table [\_SB\_.PCI0._PRT] [0.190046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.\_PRT] [0.263809] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 \*11 12 14 15) [0.263976] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) \*0, disabled. [0.264165] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 \*10 11 12 14 15) [0.264340] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 \*5 6 7 10 11 12 14 15) [0.264513] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) \*9 [0.264685] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) \*9 [0.264834] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) \*0, disabled. [0.265006] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) \*9 [0.265342] Linux Plug and Play Support v0.97 © Adam Belay [0.265409] pnp: PnP ACPI init [0.265431] ACPI: bus type pnp registered [0.274976] pnp: PnP ACPI: found 17 devices [0.274983] ACPI: ACPI bus type pnp unregistered [0.274991] PnPBIOS: Disabled by ACPI PNP [0.275490] PCI: Using ACPI for IRQ routing [0.275498] PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report [0.282220] ACPI: RTC can wake from S4 [0.282283] system 00:00: iomem range 0x0-0x9ffff could not be reserved [0.282289] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [0.282294] system 00:00: iomem range 0x100000-0x17ffffff could not be reserved [0.282299] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved [0.282304] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved [0.282317] system 00:02: ioport range 0xe400-0xe47f has been reserved [0.282322] system 00:02: ioport range 0xe480-0xe4ff has been reserved [0.282327] system 00:02: ioport range 0xe600-0xe61f has been reserved [0.282331] system 00:02: ioport range 0x480-0x48f has been reserved [0.282338] system 00:02: iomem range 0xffee0000-0xffefffff has been reserved [0.282350] system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved [0.282361] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [0.282383] system 00:10: ioport range 0x3f0-0x3f1 has been reserved [0.282387] system 00:10: ioport range 0x290-0x297 has been reserved [0.313495] PCI: Bridge: 0000:00:01.0 [0.313501] IO window: d000-dfff [0.313509] MEM window: 0xd7000000-0xd7ffffff [0.313516] PREFETCH window: 0x00000000e0000000-0x00000000febfffff [0.313537] PCI: Setting latency timer of device 0000:00:01.0 to 64 [0.313585] NET: Registered protocol family 2 [0.313794] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [0.314172] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [0.314317] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [0.314471] TCP: Hash tables configured (established 16384 bind 16384) [0.314477] TCP reno registered [0.314979] checking if image is initramfs… it is [0.816078] Switched to high resolution mode on CPU 0 [1.184356] Freeing initrd memory: 5723k freed [1.184690] Simple Boot Flag at 0x3a set to 0x1 [1.185617] audit: initializing netlink socket (disabled) [1.185645] type=2000 audit(1225824952.184:1): initialized [1.185852] Total HugeTLB memory allocated, 0 [1.185984] VFS: Disk quotas dquot\_6.5.1 [1.186029] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [1.186189] io scheduler noop registered [1.186194] io scheduler anticipatory registered [1.186197] io scheduler deadline registered [1.186211] io scheduler cfq registered (default) [1.186275] pci 0000:01:00.0: Boot video device [1.186998] vesafb: framebuffer at 0xf0000000, mapped to 0xd8880000, using 4608k, total 131072k [1.187004] vesafb: mode is 1024x768x24, linelength=3072, pages=55 [1.187008] vesafb: protected mode interface info at c000:545f [1.187012] vesafb: pmi: set display start = c00c54f3, set palette = c00c553f [1.187015] vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4 [1.187027] vesafb: scrolling: redraw [1.187031] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [1.238365] Console: switching to colour frame buffer device 128x48 [1.289389] fb0: VESA VGA frame buffer device [1.289592] isapnp: Scanning for PnP cards… [1.600137] isapnp: No Plug & Play device found [1.605250] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [1.605446] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [1.605631] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [1.606318] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [1.606601] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [1.608423] brd: module loaded [1.608621] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [1.609036] serio: i8042 KBD port at 0x60,0x64 irq 1 [1.609046] serio: i8042 AUX port at 0x60,0x64 irq 12 [1.609361] mice: PS/2 mouse device common for all mice [1.609494] cpuidle: using governor ladder [1.609498] cpuidle: using governor menu [1.610237] TCP cubic registered [1.610253] NET: Registered protocol family 1 [1.610270] NET: Registered protocol family 17 [1.610283] Using IPI No-Shortcut mode [1.610599] registered taskstats version 1 [1.611258] Freeing unused kernel memory: 252k freed [1.633571] input: AT Translated Set 2 keyboard as /class/input/input0 [1.870749] ACPI: Invalid PBLK length [5] [1.871335] ACPI: ACPI0007:00 is registered as cooling\_device0 [2.572199] No dock devices found. [2.654534] SCSI subsystem initialized [2.794618] libata version 3.00 loaded. [2.840748] pata\_sis 0000:00:02.5: version 0.5.2 [2.840799] ACPI: PCI Interrupt 0000:00:02.5[A] -\> GSI 16 (level, low) -\> IRQ 16 [2.859382] scsi0 : pata\_sis [2.876241] scsi1 : pata\_sis [2.877311] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa400 irq 14 [2.877316] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa408 irq 15 [3.048656] ata1.00: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133 [3.048665] ata1.00: 240121728 sectors, multi 16: LBA [3.048794] ata1.01: ATA-7: SAMSUNG SP0802N, TK100-24, max UDMA/100 [3.048798] ata1.01: 156368016 sectors, multi 16: LBA48 [3.064654] ata1.00: configured for UDMA/133 [3.072586] ata1.01: configured for UDMA/100 [3.082215] usbcore: registered new interface driver usbfs [3.082269] usbcore: registered new interface driver hub [3.090226] usbcore: registered new device driver usb [3.090373] sis900.c: v1.08.10 Apr. 2 2006 [3.101988] ohci\_hcd: 2006 August 04 USB 1.1 ‘Open’ Host Controller (OHCI) Driver [3.273175] Floppy drive(s): fd0 is 1.44M [3.292003] FDC 0 is a post-1991 82077 [3.547913] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616F, FS05, max UDMA/33 [3.547913] ata2.01: ATAPI: SAMSUNG CD-R/RW SW-216B BS05 20010727, BS05, max MWDMA2 [3.711238] ata2.00: configured for UDMA/33 [3.882509] ata2.01: configured for PIO4 [3.882509] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5 [3.882509] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0802N TK10 PQ: 0 ANSI: 5 [3.882509] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616F FS05 PQ: 0 ANSI: 5 [3.882509] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-216B BS05 PQ: 0 ANSI: 5 [3.882509] ACPI: PCI Interrupt 0000:00:03.0[A] -\> GSI 20 (level, low) -\> IRQ 20 [3.882509] ohci\_hcd 0000:00:03.0: OHCI Host Controller [3.882509] ohci\_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [3.882509] ohci\_hcd 0000:00:03.0: irq 20, io mem 0xd6800000 [3.895511] Uniform Multi-Platform E-IDE driver [3.895520] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [3.938823] usb usb1: configuration #1 chosen from 1 choice [3.938823] hub 1-0:1.0: USB hub found [3.938823] hub 1-0:1.0: 3 ports detected [4.041232] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [4.041232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [4.041232] usb usb1: Product: OHCI Host Controller [4.041232] usb usb1: Manufacturer: Linux 2.6.25-2-686 ohci\_hcd [4.041232] usb usb1: SerialNumber: 0000:00:03.0 [4.041232] ACPI: PCI Interrupt 0000:00:03.1[B] -\> GSI 21 (level, low) -\> IRQ 21 [4.041232] ohci\_hcd 0000:00:03.1: OHCI Host Controller [4.041232] ohci\_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [4.041232] ohci\_hcd 0000:00:03.1: irq 21, io mem 0xd6000000 [4.095867] usb usb2: configuration #1 chosen from 1 choice [4.095867] hub 2-0:1.0: USB hub found [4.095867] hub 2-0:1.0: 3 ports detected [4.196540] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [4.196540] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [4.196540] usb usb2: Product: OHCI Host Controller [4.196540] usb usb2: Manufacturer: Linux 2.6.25-2-686 ohci\_hcd [4.196540] usb usb2: SerialNumber: 0000:00:03.1 [4.196540] ACPI: PCI Interrupt 0000:00:03.3[D] -\> GSI 23 (level, low) -\> IRQ 23 [4.196540] ehci\_hcd 0000:00:03.3: EHCI Host Controller [4.196540] ehci\_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3 [4.196540] PCI: cache line size of 128 is not supported by device 0000:00:03.3 [4.196540] ehci\_hcd 0000:00:03.3: irq 23, io mem 0xd5800000 [4.204634] ehci\_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4.204864] usb usb3: configuration #1 chosen from 1 choice [4.204908] hub 3-0:1.0: USB hub found [4.204929] hub 3-0:1.0: 6 ports detected [4.308765] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [4.308773] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [4.308778] usb usb3: Product: EHCI Host Controller [4.308781] usb usb3: Manufacturer: Linux 2.6.25-2-686 ehci\_hcd [4.308785] usb usb3: SerialNumber: 0000:00:03.3 [4.310337] ACPI: PCI Interrupt 0000:00:04.0[A] -\> GSI 19 (level, low) -\> IRQ 19 [4.311780] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [4.323444] 0000:00:04.0: Using transceiver found at address 1 as default [4.324646] eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 19, 00:0c:6e:0c:e9:b4 [4.399830] Driver ‘sd’ needs updating - please use bus\_type methods [4.400008] sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB) [4.400037] sd 0:0:0:0: [sda] Write Protect is off [4.400042] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [4.400087] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [4.400206] sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB) [4.400235] sd 0:0:0:0: [sda] Write Protect is off [4.400239] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [4.400282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [4.400288] sda: sda1 sda2 sda3 sda4 \< sda5 sda6\<4\>Driver ‘sr’ needs updating - please use bus\_type methods [4.458803] sda7 sda8 sda9 \> [4.503390] sd 0:0:0:0: [sda] Attached SCSI disk [4.503554] sd 0:0:1:0: [sdb] 156368016 512-byte hardware sectors (80060 MB) [4.503583] sd 0:0:1:0: [sdb] Write Protect is off [4.503588] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [4.503633] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [4.503747] sd 0:0:1:0: [sdb] 156368016 512-byte hardware sectors (80060 MB) [4.503776] sd 0:0:1:0: [sdb] Write Protect is off [4.503780] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [4.503824] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [4.503829] sdb: sdb1 sdb2 sdb3 [4.507147] sd 0:0:1:0: [sdb] Attached SCSI disk [4.510189] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray [4.510198] Uniform CD-ROM driver Revision: 3.20 [4.510315] sr 1:0:0:0: Attached scsi CD-ROM sr0 [4.513630] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [4.513772] sr 1:0:1:0: Attached scsi CD-ROM sr1 [4.566923] hub 3-0:1.0: unable to enumerate USB device on port 2 [4.576397] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4.576440] sd 0:0:1:0: Attached scsi generic sg1 type 0 [4.576476] sr 1:0:0:0: Attached scsi generic sg2 type 5 [4.576509] sr 1:0:1:0: Attached scsi generic sg3 type 5 [4.634759] ata2: DRQ=1 with device error, dev\_stat 0x59 [4.634837] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [4.635548] ata2.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in [4.635551] cdb 46 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 [4.635553] res 59/20:02:00:08:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation) [4.636261] ata2.01: status: { DRDY DRQ ERR } [4.636655] ata2: soft resetting link [4.891296] usb 2-1: new full speed USB device using ohci\_hcd and address 2 [5.151761] usb 2-1: configuration #1 chosen from 1 choice [5.153685] usb 2-1: New USB device found, idVendor=04b8, idProduct=010f [5.153692] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [5.153696] usb 2-1: Product: EPSON Scanner 010F [5.153700] usb 2-1: Manufacturer: EPSON [5.362845] ata2.00: configured for UDMA/33 [5.539171] ata2.01: configured for PIO4 [5.539171] ata2: EH complete [5.616364] ReiserFS: sda3: found reiserfs format “3.6” with standard journal [5.616384] ReiserFS: sda3: using ordered data mode [5.638269] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [5.639821] ReiserFS: sda3: checking transaction log (sda3) [5.675915] ReiserFS: sda3: Using r5 hash to sort names [7.638643] udevd version 125 started [8.219294] ata2: DRQ=1 with device error, dev\_stat 0x59 [8.219354] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [8.220123] ata2.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in [8.220126] cdb 46 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 [8.220128] res 59/20:02:00:08:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation) [8.220646] ata2.01: status: { DRDY DRQ ERR } [8.221108] ata2: soft resetting link [8.861160] ata2.00: configured for UDMA/33 [9.035252] ata2.01: configured for PIO4 [9.035308] ata2: EH complete [9.747326] Linux agpgart interface v0.103 [9.774090] agpgart: Detected SiS chipset - id:1606 [9.778403] agpgart: AGP aperture is 64M @ 0xd8000000 [9.908709] sis96x\_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600 [10.321566] input: Power Button (FF) as /class/input/input1 [10.352894] ACPI: Power Button (FF) [PWRF] [10.353025] input: Power Button (CM) as /class/input/input2 [10.384872] ACPI: Power Button (CM) [PWRB] [10.961767] ACPI: PCI Interrupt 0000:00:02.7[C] -\> GSI 18 (level, low) -\> IRQ 18 [11.384883] intel8x0\_measure\_ac97\_clock: measured 52248 usecs [11.384891] intel8x0: clocking to 48000 [11.984460] input: PC Speaker as /class/input/input3 [12.431553] rtc\_cmos 00:06: rtc core: registered rtc\_cmos as rtc0 [12.431591] rtc0: alarms up to one month [12.544500] gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x200, speed 828kHz [13.041941] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input4 [13.068831] parport\_pc 00:0a: reported by Plug and Play ACPI [13.068889] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [13.906789] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k [20.567651] loop: module loaded [26.735551] ReiserFS: sda1: found reiserfs format “3.6” with standard journal [26.735551] ReiserFS: sda1: using ordered data mode [26.739517] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [26.740079] ReiserFS: sda1: checking transaction log (sda1) [26.747786] ReiserFS: sda1: Using r5 hash to sort names [26.764773] ReiserFS: sda6: found reiserfs format “3.6” with standard journal [26.764773] ReiserFS: sda6: using ordered data mode [26.774992] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [26.775644] ReiserFS: sda6: checking transaction log (sda6) [26.820710] ReiserFS: sda6: Using r5 hash to sort names [26.865966] ReiserFS: sda8: found reiserfs format “3.6” with standard journal [26.865966] ReiserFS: sda8: using ordered data mode [26.870125] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [26.870623] ReiserFS: sda8: checking transaction log (sda8) [26.960567] ReiserFS: sda8: Using r5 hash to sort names [27.001325] ReiserFS: sdb3: found reiserfs format “3.6” with standard journal [27.001325] ReiserFS: sdb3: using ordered data mode [27.008099] ReiserFS: sdb3: journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [27.008099] ReiserFS: sdb3: checking transaction log (sdb3) [27.038571] ReiserFS: sdb3: Using r5 hash to sort names [27.545344] ip\_tables: © 2000-2006 Netfilter Core Team [27.638876] nf\_conntrack version 0.5.0 (6144 buckets, 24576 max) [30.393221] NET: Registered protocol family 10 [30.394368] lo: Disabled Privacy Extensions [30.876511] eth0: Media Link On 100mbps full-duplex ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/6 "2016-02-20T18:24:09Z")
je viens de m’apercevoir que mon système plante complètement quand j’insère un dvd. C’est un lecteur que j’utilise rarement et je ne sais pas depuis quand il plante. Mais c’est sur il a déjà marché très bien. voici un extrait de syslog concernant me semble t’il les lecteurs je ne vois rien d’anormal sauf qu’il me dit de mettre à jour “sr” ? what ? Nov 4 20:04:49 bv-pc kernel: [3.555677] scsi0 : pata\_sis Nov 4 20:04:49 bv-pc kernel: [3.558307] scsi1 : pata\_sis Nov 4 20:04:49 bv-pc kernel: [3.559443] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa400 irq 14 Nov 4 20:04:49 bv-pc kernel: [3.559449] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa408 irq 15 Nov 4 20:04:49 bv-pc kernel: [3.734708] ata1.00: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133 Nov 4 20:04:49 bv-pc kernel: [3.734708] ata1.00: 240121728 sectors, multi 16: LBA Nov 4 20:04:49 bv-pc kernel: [3.734747] ata1.01: ATA-7: SAMSUNG SP0802N, TK100-24, max UDMA/100 Nov 4 20:04:49 bv-pc kernel: [3.734747] ata1.01: 156368016 sectors, multi 16: LBA48 Nov 4 20:04:49 bv-pc kernel: [3.751387] ata1.00: configured for UDMA/133 Nov 4 20:04:49 bv-pc kernel: [3.758711] ata1.01: configured for UDMA/100 Nov 4 20:04:49 bv-pc kernel: [3.806208] hub 3-0:1.0: unable to enumerate USB device on port 2 Nov 4 20:04:49 bv-pc kernel: [4.108905] usb 2-1: new full speed USB device using ohci\_hcd and address 2 Nov 4 20:04:49 bv-pc kernel: [4.234320] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616F, FS05, max UDMA/33 Nov 4 20:04:49 bv-pc kernel: [4.234320] ata2.01: ATAPI: SAMSUNG CD-R/RW SW-216B BS05 20010727, BS05, max MWDMA2 Nov 4 20:04:49 bv-pc kernel: [4.328772] usb 2-1: configuration #1 chosen from 1 choice Nov 4 20:04:49 bv-pc kernel: [4.332513] usb 2-1: New USB device found, idVendor=04b8, idProduct=010f Nov 4 20:04:49 bv-pc kernel: [4.332520] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Nov 4 20:04:49 bv-pc kernel: [4.332525] usb 2-1: Product: EPSON Scanner 010F Nov 4 20:04:49 bv-pc kernel: [4.332528] usb 2-1: Manufacturer: EPSON Nov 4 20:04:49 bv-pc kernel: [4.402844] ata2.00: configured for UDMA/33 Nov 4 20:04:49 bv-pc kernel: [4.575990] ata2.01: configured for PIO4 Nov 4 20:04:49 bv-pc kernel: [4.575990] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5 Nov 4 20:04:49 bv-pc kernel: [4.575990] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0802N TK10 PQ: 0 ANSI: 5 Nov 4 20:04:49 bv-pc kernel: [4.576059] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616F FS05 PQ: 0 ANSI: 5 Nov 4 20:04:49 bv-pc kernel: [4.576909] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-216B BS05 PQ: 0 ANSI: 5 Nov 4 20:04:49 bv-pc kernel: [4.587124] Uniform Multi-Platform E-IDE driver Nov 4 20:04:49 bv-pc kernel: [4.587133] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Nov 4 20:04:49 bv-pc kernel: [4.680778] Driver ‘sd’ needs updating - please use bus\_type methods Nov 4 20:04:49 bv-pc kernel: [4.680973] sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB) Nov 4 20:04:49 bv-pc kernel: [4.681003] sd 0:0:0:0: [sda] Write Protect is off Nov 4 20:04:49 bv-pc kernel: [4.681008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 4 20:04:49 bv-pc kernel: [4.681055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA Nov 4 20:04:49 bv-pc kernel: [4.681175] sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB) Nov 4 20:04:49 bv-pc kernel: [4.681201] sd 0:0:0:0: [sda] Write Protect is off Nov 4 20:04:49 bv-pc kernel: [4.681206] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 4 20:04:49 bv-pc kernel: [4.681251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA Nov 4 20:04:49 bv-pc kernel: [4.681256] sda: sda1 sda2 sda3 sda4 \< sda5\<4\>Driver ‘sr’ needs updating - please use bus\_type methods Nov 4 20:04:49 bv-pc kernel: [4.719902] sda6 sda7 sda8 sda9 \> Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:0:0: [sda] Attached SCSI disk Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:1:0: [sdb] 156368016 512-byte hardware sectors (80060 MB) Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:1:0: [sdb] Write Protect is off Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:1:0: [sdb] 156368016 512-byte hardware sectors (80060 MB) Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:1:0: [sdb] Write Protect is off Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 Nov 4 20:04:49 bv-pc kernel: [4.781633] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA Nov 4 20:04:49 bv-pc kernel: [4.781633] sdb: sdb1 sdb2 sdb3 Nov 4 20:04:49 bv-pc kernel: [4.790427] sd 0:0:1:0: [sdb] Attached SCSI disk Nov 4 20:04:49 bv-pc kernel: [4.791343] sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray Nov 4 20:04:49 bv-pc kernel: [4.791351] Uniform CD-ROM driver Revision: 3.20 Nov 4 20:04:49 bv-pc kernel: [4.791469] sr 1:0:0:0: Attached scsi CD-ROM sr0 Nov 4 20:04:49 bv-pc kernel: [4.794893] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Nov 4 20:04:49 bv-pc kernel: [4.795024] sr 1:0:1:0: Attached scsi CD-ROM sr1 Nov 4 20:04:49 bv-pc kernel: [4.896990] sd 0:0:0:0: Attached scsi generic sg0 type 0 Nov 4 20:04:49 bv-pc kernel: [4.897037] sd 0:0:1:0: Attached scsi generic sg1 type 0 Nov 4 20:04:49 bv-pc kernel: [4.897075] sr 1:0:0:0: Attached scsi generic sg2 type 5 Nov 4 20:04:49 bv-pc kernel: [4.897109] sr 1:0:1:0: Attached scsi generic sg3 type 5 Nov 4 20:04:49 bv-pc kernel: [4.920137] ata2: DRQ=1 with device error, dev\_stat 0x59 Nov 4 20:04:49 bv-pc kernel: [4.920190] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Nov 4 20:04:49 bv-pc kernel: [4.920899] ata2.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in Nov 4 20:04:49 bv-pc kernel: [4.920902] cdb 46 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 Nov 4 20:04:49 bv-pc kernel: [4.920904] res 59/20:02:00:08:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation) Nov 4 20:04:49 bv-pc kernel: [4.921640] ata2.01: status: { DRDY DRQ ERR } Nov 4 20:04:49 bv-pc kernel: [4.922100] ata2: soft resetting link Nov 4 20:04:49 bv-pc kernel: [5.642927] ata2.00: configured for UDMA/33 Nov 4 20:04:49 bv-pc kernel: [5.818828] ata2.01: configured for PIO4 Nov 4 20:04:49 bv-pc kernel: [5.818828] ata2: EH complete Nov 4 20:04:49 bv-pc kernel: [5.921353] ReiserFS: sda3: found reiserfs format “3.6” with standard journal Nov 4 20:04:49 bv-pc kernel: [5.921373] ReiserFS: sda3: using ordered data mode Nov 4 20:04:49 bv-pc kernel: [5.944905] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Nov 4 20:04:49 bv-pc kernel: [5.945679] ReiserFS: sda3: checking transaction log (sda3) Nov 4 20:04:49 bv-pc kernel: [21.678682] ReiserFS: sda3: replayed 287 transactions in 16 seconds Nov 4 20:04:49 bv-pc kernel: [21.678818] ReiserFS: sda3: Using r5 hash to sort names Nov 4 20:04:49 bv-pc kernel: [23.490495] udevd version 125 started Nov 4 20:04:49 bv-pc kernel: [24.035243] ata2: DRQ=1 with device error, dev\_stat 0x59 Nov 4 20:04:49 bv-pc kernel: [24.035329] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Nov 4 20:04:49 bv-pc kernel: [24.036039] ata2.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in Nov 4 20:04:49 bv-pc kernel: [24.036041] cdb 46 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 Nov 4 20:04:49 bv-pc kernel: [24.036043] res 59/20:02:00:08:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation) Nov 4 20:04:49 bv-pc kernel: [24.036750] ata2.01: status: { DRDY DRQ ERR } Nov 4 20:04:49 bv-pc kernel: [24.037062] ata2: soft resetting link Nov 4 20:04:49 bv-pc kernel: [24.677520] ata2.00: configured for UDMA/33 Nov 4 20:04:49 bv-pc kernel: [24.849386] ata2.01: configured for PIO4 Nov 4 20:04:49 bv-pc kernel: [24.849434] ata2: EH complete ---
**Author:** ![fran.b](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/f/d78d45/32.png) [@fran.b](https://www.debian-fr.org/u/fran.b)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/7 "2016-02-20T18:24:10Z")
Tu as un lecteur CD SATA reconnu comme /dev/scd0 ou /dev/sr0 au lieu de /dev/hdd. Voilà. ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/8 "2016-02-20T18:24:10Z")
y a t’il un moyen pour mettre de l’ordre ? ---
**Author:** ![fran.b](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/f/d78d45/32.png) [@fran.b](https://www.debian-fr.org/u/fran.b)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/9 "2016-02-20T18:24:10Z")
Change /dev/hdd en /dev/scd0 dans ton /etc/fstab, ça devrait suffire. ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/10 "2016-02-20T18:24:11Z")
je n’ai aucune déclaration de mes 2 lecteurs dans fstab mon lecteur qui marche est monté avec pmount, l’autre plante ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/11 "2016-02-20T18:24:11Z")
avec le noyau lenny, c’est au début du chargement que cela plante je ne sais pas s’il s’intéresse à fstab à ce niveau là ? ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/12 "2016-02-20T18:24:11Z")
je viens d’écrire cette ligne dans fstab /dev/hdd /media/cdrom1 udf,iso9660 user,noauto 0 0 puis fait un mount -a : aucun message puis mount : pas de hdd monté ---
**Author:** ![fran.b](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/f/d78d45/32.png) [@fran.b](https://www.debian-fr.org/u/fran.b)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/13 "2016-02-20T18:24:12Z")
Non justement /dev/hdd n’existe plus. Tu dois théoriquement avoir /dev/cdrom qui pointe vers /dev/scd0 ou /dev/sr0. Eventuellement supprime ou plutôt déplace /etc/udev/rules.d/z25\_persistent-cd.rules Ça doit être ça tes problèmes. ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/14 "2016-02-20T18:24:12Z")
dans fstab j’avais ça #/dev/sdd /media/cdrom0 udf,iso9660 user,noauto 0 0 #/dev/sdc /media/cdrom1 udf,iso9660 user,noauto 0 0 j’ai déplacé 70-persistent-cd.rules ça plante après un reboot il a recréé ce même fichier mais le contenu n’est pas le même ---
**Author:** ![fran.b](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/f/d78d45/32.png) [@fran.b](https://www.debian-fr.org/u/fran.b)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/15 "2016-02-20T18:24:15Z")
Tu peux mettre le contenu de ces deux fichiers ainsi que le résultat de $ ls -ls /dev/cdrom $ ls /dev/.udev/names/cdrom $ ls /dev/.udev/names/cdrw $ ls /dev/.udev/names/dvd $ ls /dev/.udev/names/dvdrw $ ls -d /dev/s\* ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/16 "2016-02-20T18:24:21Z")
voici les réponses aux commandes ls -ls /dev/cdrom 0 lrwxrwxrwx 1 root root 4 nov 5 2008 /dev/cdrom -\> scd1 bv-pc@bv~ : $ ls /dev/.udev/names/cdrom \x2fblock\x2fsr0 \x2fblock\x2fsr1 bv-pc@bv~ : $ ls /dev/.udev/names/cdrw \x2fblock\x2fsr1 bv-pc@bv~ : $ ls /dev/.udev/names/dvd \x2fblock\x2fsr0 bv-pc@bv~ : $ ls /dev/.udev/names/dvdrw ls: ne peut accéder /dev/.udev/names/dvdrw: Aucun fichier ou répertoire de ce ty pe bv-pc@bv~ : $ ls -d /dev/s\* /dev/scd0 /dev/sda3 /dev/sda8 /dev/sdb3 /dev/shm /dev/sr1 /dev/scd1 /dev/sda4 /dev/sda9 /dev/sg0 /dev/snapshot /dev/stderr /dev/sda /dev/sda5 /dev/sdb /dev/sg1 /dev/snd /dev/stdin /dev/sda1 /dev/sda6 /dev/sdb1 /dev/sg2 /dev/sndstat /dev/stdout /dev/sda2 /dev/sda7 /dev/sdb2 /dev/sg3 /dev/sr0 ---
**Author:** ![fran.b](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/f/d78d45/32.png) [@fran.b](https://www.debian-fr.org/u/fran.b)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/17 "2016-02-20T18:24:22Z")
Bon, d’après ce que je vois, il y a une première initialisation du SATA qui échoue puis une deuxième qui fonctionne, ton CDROM est /dev/scd1 ou /dev/sr1 (en tout rigueur le premier est pour la lecture et le second pour la gravure) Dans ton /etc/fstab remplace bêtement /dev/hdd par /dev/cdrom. Qu’y a-t-il dans /etc/udev/rules.d/70-persistent-cd.rules ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:24 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/18 "2016-02-20T18:24:23Z")
voici la ligne ajoutée /dev/cdrom /media/cdrom1 udf,iso9660 user,noauto 0 0 pas de changement j’ai pensé que mon dvd est peut-être HS je l’ai donc débranché : idem si je débranche mes 2 lecteurs le démarrage avec noyau 2.6.18 reste coincé ---
**Author:** ![Bernard\_Victor](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@Bernard\_Victor](https://www.debian-fr.org/u/Bernard_Victor)\ **Post date:** [Février 20, 2016, 6:27 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/19 "2016-02-20T18:27:26Z")
bon après quelques déboires, je n’ai toujours pas résolu mon problème j’ai installé sur une partition libre un nouveau système lenny noyau 2 6 24 1 686 grosse erreur de ma part, j’ai un /boot commun j’ai effacé les autres linux-image dont celui qui marchait plus ou moins bien impeccable tout marche à merveille mais voilà, je fais un upgrade et charge le noyau proposé 2 6 26 impeccable, tout foire le noyau 2 6 26 reste bloqué au chargement rien ne va plus avec le noyau 2 6 24 1 686 : mon lecteur de DVD n’est plus opérationnel, pas de montage automatique, k3b plante, le système plante dès que j’insére un DVD après avoir obtenu quelques renseignements dans dmesg, j’ai configuré mon fstab comme ceci dmesg |grep CD-ROM scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616F FS05 PQ: 0 ANSI: 5 scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-216B BS05 PQ: 0 ANSI: 5 Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:1:0: Attached scsi CD-ROM sr1 fstab /dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/sr1 /media/cdrom1 udf,iso9660 user,noauto 0 0 je ne sais plus quoi faire ! ---
**Author:** ![fran.b](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/f/d78d45/32.png) [@fran.b](https://www.debian-fr.org/u/fran.b)\ **Post date:** [Février 20, 2016, 6:27 UTC](https://www.debian-fr.org/t/coince-sur-un-noyau/16257/20 "2016-02-20T18:27:32Z")
Efface le fichier /etc/udev/rules.d/z25\_persistent-cd.rules (déplaces le) [Page suivante](https://www.debian-fr.org/t/coince-sur-un-noyau/16257.md?page=2)