# Créer sa propre image debian pour le Raspberry Pi 2 B **URL:** \ **Category:** Support Debian\ **Tags:** raspberry, installation, boot\ **Created:** [Septembre 22, 2023, 6:32 UTC](https://www.debian-fr.org/t/creer-sa-propre-image-debian-pour-le-raspberry-pi-2-b/88842 "2023-09-22T18:32:30Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![libresurf](https://www.debian-fr.org/user_avatar/www.debian-fr.org/libresurf/32/5259_2.png) [@libresurf](https://www.debian-fr.org/u/libresurf)\ **Post date:** [Septembre 22, 2023, 6:32 UTC](https://www.debian-fr.org/t/creer-sa-propre-image-debian-pour-le-raspberry-pi-2-b/88842/1 "2023-09-22T18:32:30Z")
Bonjour, Est-ce quelqu’un a déjà réussi à préparer sa propre image pour le Raspberry Pi 2 B à partir uniquement des dépôts de debian ? Je n’ai jamais réussi et me rabattais sur les images de Raspbian, puis de Raspberry Pi OS. Mais ça commence à me courir sur le système de ne pas réussir à créer ma propre image par debootstrap, alors que j’ai aucun problème pour le Sheevaplug ou l’A20-OLinuXino-LIME2 (qui nécessite quand même une astuce particulière pour flasher le SPL au bon endroit). J’utilise le paquet _raspi-firmware_ qui est sensé installer le bootloader du Raspberry Pi dans _/boot/firmware_, mais ça ne fonctionne pas. Voici les grandes étapes : Le partitionnement de la carte SD : ``` $ sudo parted -s rpi.img unit s print Model: (file) Disk : [...]/rpi.img: 4194304s Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 8192s 524287s 516096s primary fat32 boot, lba 2 524288s 4194303s 3670016s primary ext4 ``` Et le contenu du répertoire /boot/firmware : ``` $ ls -la ~/mnt/boot/firmware/ total 81496 drwxr-xr-x 2 root root 4096 1 janv. 1970 . drwxr-xr-x 3 root root 4096 20 sept. 21:40 .. -rwxr-xr-x 1 root root 27406 20 sept. 21:40 bcm2711-rpi-400.dtb -rwxr-xr-x 1 root root 27434 20 sept. 21:40 bcm2711-rpi-4-b.dtb -rwxr-xr-x 1 root root 27323 20 sept. 21:40 bcm2711-rpi-cm4-io.dtb -rwxr-xr-x 1 root root 12791 20 sept. 21:40 bcm2835-rpi-a.dtb -rwxr-xr-x 1 root root 12927 20 sept. 21:40 bcm2835-rpi-a-plus.dtb -rwxr-xr-x 1 root root 12909 20 sept. 21:40 bcm2835-rpi-b.dtb -rwxr-xr-x 1 root root 13149 20 sept. 21:40 bcm2835-rpi-b-plus.dtb -rwxr-xr-x 1 root root 12997 20 sept. 21:40 bcm2835-rpi-b-rev2.dtb -rwxr-xr-x 1 root root 13021 20 sept. 21:40 bcm2835-rpi-cm1-io1.dtb -rwxr-xr-x 1 root root 12835 20 sept. 21:40 bcm2835-rpi-zero.dtb -rwxr-xr-x 1 root root 13361 20 sept. 21:40 bcm2835-rpi-zero-w.dtb -rwxr-xr-x 1 root root 14374 20 sept. 21:40 bcm2836-rpi-2-b.dtb -rwxr-xr-x 1 root root 14816 20 sept. 21:40 bcm2837-rpi-3-a-plus.dtb -rwxr-xr-x 1 root root 14993 20 sept. 21:40 bcm2837-rpi-3-b.dtb -rwxr-xr-x 1 root root 15349 20 sept. 21:40 bcm2837-rpi-3-b-plus.dtb -rwxr-xr-x 1 root root 14355 20 sept. 21:40 bcm2837-rpi-cm3-io3.dtb -rwxr-xr-x 1 root root 14667 20 sept. 21:40 bcm2837-rpi-zero-2-w.dtb -rwxr-xr-x 1 root root 52460 20 sept. 21:34 bootcode.bin -rwxr-xr-x 1 root root 105 20 sept. 21:40 cmdline.txt -rwxr-xr-x 1 root root 520 20 sept. 21:40 config.txt -rwxr-xr-x 1 root root 3170 20 sept. 21:34 fixup4cd.dat -rwxr-xr-x 1 root root 5399 20 sept. 21:34 fixup4.dat -rwxr-xr-x 1 root root 8379 20 sept. 21:34 fixup4db.dat -rwxr-xr-x 1 root root 8379 20 sept. 21:34 fixup4x.dat -rwxr-xr-x 1 root root 3170 20 sept. 21:34 fixup_cd.dat -rwxr-xr-x 1 root root 7262 20 sept. 21:34 fixup.dat -rwxr-xr-x 1 root root 10228 20 sept. 21:34 fixup_db.dat -rwxr-xr-x 1 root root 10226 20 sept. 21:34 fixup_x.dat -rwxr-xr-x 1 root root 25048780 22 sept. 11:35 initrd.img -rwxr-xr-x 1 root root 25048780 20 sept. 21:40 initrd.img-6.1.0-10-armmp-lpae -rwxr-xr-x 1 root root 5403136 22 sept. 11:35 kernel7.img -rwxr-xr-x 1 root root 803964 20 sept. 21:34 start4cd.elf -rwxr-xr-x 1 root root 3744808 20 sept. 21:34 start4db.elf -rwxr-xr-x 1 root root 2249280 20 sept. 21:34 start4.elf -rwxr-xr-x 1 root root 2996680 20 sept. 21:34 start4x.elf -rwxr-xr-x 1 root root 803964 20 sept. 21:34 start_cd.elf -rwxr-xr-x 1 root root 4816712 20 sept. 21:34 start_db.elf -rwxr-xr-x 1 root root 2973536 20 sept. 21:34 start.elf -rwxr-xr-x 1 root root 3720360 20 sept. 21:34 start_x.elf -rwxr-xr-x 1 root root 5403136 20 sept. 21:40 vmlinuz-6.1.0-10-armmp-lpae ``` Ici, j’ai copié l’image du noyau vmlinuz-6.1.0-10-armmp-lpae en kernel7.img, qui est requis pour le démarrage du Raspberry Pi 2 B. Mais l’affichage de la console de debuggage UART n’affiche rien lors de la mise sous tension du Raspberry Pi. Est-ce que le paquet _raspi-firmware_ fonctionne bien avec le Raspberry Pi 2 B ? ---
**Author:** ![libresurf](https://www.debian-fr.org/user_avatar/www.debian-fr.org/libresurf/32/5259_2.png) [@libresurf](https://www.debian-fr.org/u/libresurf)\ **Post date:** [Septembre 23, 2023, 10:31 UTC](https://www.debian-fr.org/t/creer-sa-propre-image-debian-pour-le-raspberry-pi-2-b/88842/2 "2023-09-23T10:31:44Z")
J’avance enfin un peu… Le paquet _raspi-firmware_ fonctionne finalement bien. Le seul problème est la définition de la console série dans le fichier _/boot/firmware/cmdline.txt_. À l’installation, on a : ``` console=tty0 console=ttyS1,115200 root=/dev/mmcblk0p2 rw fsck.repair=yes net.ifnames=0 cma=64M rootwait ``` Je ne sais pas ce qu’est la console ttyS1, mais ce n’est pas la bonne pour utiliser l’UART. Il faut rajouter _console=serial0,115200_ pour que ça fonctionne : ``` console=serial0,115200 console=tty0 console=ttyS1,115200 root=/dev/mmcblk0p2 rw fsck.repair=yes net.ifnames=0 cma=64M rootwait ``` Maintenant, j’ai un autre problème, c’est que le noyau n’arrive pas à accéder à la partition racine : ``` [0.000000] Booting Linux on physical CPU 0xf00 [0.000000] Linux version 6.1.0-10-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.38-1 (2023-07-14) [0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d [0.000000] CPU: div instructions available: patching division code [0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [0.000000] random: crng init done [0.000000] Memory policy: Data cache writealloc [0.000000] efi: UEFI not found. [0.000000] Reserved memory: bypass linux,cma node, using cmdline CMA params instead [0.000000] OF: reserved mem: node linux,cma compatible matching fail [0.000000] cma: Reserved 64 MiB at 0x0000000037400000 [0.000000] Zone ranges: [0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [0.000000] Normal empty [0.000000] HighMem [mem 0x0000000030000000-0x000000003b3fffff] [0.000000] Movable zone start for each node [0.000000] Early memory node ranges [0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [0.000000] percpu: Embedded 18 pages/cpu s41684 r8192 d23852 u73728 [0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240960 [0.000000] Kernel command line: video=Composite-1:720x480@60i,margin_left=32,margin_right=32,margin_top=32,margin_bottom=32 dma.dmachans=0x7ff5 bcm2709.boardrev=0xa01041 bcm2709.serial=0x5c7e3350 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=B8:27:EB:7E:33:50 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty0 console=ttyS1,115200 root=/dev/mmcblk0p2 rw fsck.repair=yes net.ifnames=0 cma=64M rootwait [0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [0.000000] Memory: 850484K/970752K available (12288K kernel code, 1709K rwdata, 3588K rodata, 2048K init, 384K bss, 54732K reserved, 65536K cma-reserved, 118784K highmem) [0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [0.000000] ftrace: allocating 39699 entries in 117 pages [0.000000] ftrace: allocated 117 pages with 5 groups [0.000000] trace event string verifier disabled [0.000000] rcu: Hierarchical RCU implementation. [0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [0.000000] Rude variant of Tasks RCU enabled. [0.000000] Tracing variant of Tasks RCU enabled. [0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [0.000038] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [0.000124] bcm2835: system timer (irq = 60) [0.002211] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [0.002238] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [0.002264] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [0.002284] Switching to timer-based delay loop, resolution 52ns [0.003027] Console: colour dummy device 80x30 [0.003992] printk: console [tty0] enabled [0.004095] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [0.004175] pid_max: default: 32768 minimum: 301 [0.004476] LSM: Security Framework initializing [0.004611] landlock: Up and running. [0.004637] Yama: disabled by default; enable with sysctl kernel.yama.* [0.004990] AppArmor: AppArmor initialized [0.005032] TOMOYO Linux initialized [0.005100] LSM support for eBPF active [0.005359] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [0.005421] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [0.007299] CPU: Testing write buffer coherency: ok [0.008147] CPU0: update cpu_capacity 1024 [0.008197] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [0.009697] cblist_init_generic: Setting adjustable number of callback queues. [0.009757] cblist_init_generic: Setting shift to 2 and lim to 1. [0.009983] cblist_init_generic: Setting shift to 2 and lim to 1. [0.010372] Setting up static identity map for 0x400000 - 0x4000ac [0.011338] rcu: Hierarchical SRCU implementation. [0.011379] rcu: Max phase no-delay instances is 1000. [0.013802] EFI services will not be available. [0.014820] smp: Bringing up secondary CPUs ... [0.016473] CPU1: update cpu_capacity 1024 [0.016496] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [0.018193] CPU2: update cpu_capacity 1024 [0.018214] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [0.019837] CPU3: update cpu_capacity 1024 [0.019857] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [0.020091] smp: Brought up 1 node, 4 CPUs [0.020240] SMP: Total of 4 processors activated (153.60 BogoMIPS). [0.020273] CPU: All CPU(s) started in HYP mode. [0.020295] CPU: Virtualization extensions available. [0.021850] devtmpfs: initialized [0.033047] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [0.033612] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [0.033757] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [0.038653] pinctrl core: initialized pinctrl subsystem [0.040149] DMI not present or invalid. [0.040895] NET: Registered PF_NETLINK/PF_ROUTE protocol family [0.045165] DMA: preallocated 256 KiB pool for atomic coherent allocations [0.049643] audit: initializing netlink subsys (disabled) [0.050148] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1 [0.051934] thermal_sys: Registered thermal governor 'fair_share' [0.051954] thermal_sys: Registered thermal governor 'bang_bang' [0.051990] thermal_sys: Registered thermal governor 'step_wise' [0.052018] thermal_sys: Registered thermal governor 'user_space' [0.052045] thermal_sys: Registered thermal governor 'power_allocator' [0.052715] No ATAGs? [0.052998] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [0.053048] hw-breakpoint: maximum watchpoint size is 8 bytes. [0.054456] Serial: AMBA PL011 UART driver [0.083285] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [0.085870] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [0.085930] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [0.091828] iommu: Default domain type: Translated [0.091887] iommu: DMA domain TLB invalidation policy: strict mode [0.095631] NetLabel: Initializing [0.095688] NetLabel: domain hash size = 128 [0.095712] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [0.095877] NetLabel: unlabeled traffic allowed by default [0.096291] vgaarb: loaded [0.127032] clocksource: Switched to clocksource arch_sys_counter [0.128299] VFS: Disk quotas dquot_6.6.0 [0.128475] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [0.129876] AppArmor: AppArmor Filesystem Enabled [0.146944] NET: Registered PF_INET protocol family [0.147961] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [0.152871] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [0.153256] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [0.153348] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [0.153627] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [0.154003] TCP: Hash tables configured (established 8192 bind 8192) [0.154564] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) [0.154797] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [0.154907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [0.155437] NET: Registered PF_UNIX/PF_LOCAL protocol family [0.155546] NET: Registered PF_XDP protocol family [0.155594] PCI: CLS 0 bytes, default 64 [0.157407] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [0.157444] Trying to unpack rootfs image as initramfs... [0.157551] Initramfs unpacking failed: invalid magic at start of compressed archive [0.210490] Freeing initrd memory: 24464K [0.235762] Initialise system trusted keyrings [0.235920] Key type blacklist registered [0.236458] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [0.249219] zbud: loaded [0.251345] integrity: Platform Keyring initialized [0.251434] integrity: Machine keyring initialized [0.251468] Key type asymmetric registered [0.251495] Asymmetric key parser 'x509' registered [0.262270] alg: self-tests for CTR-KDF (hmac(sha256)) passed [0.262982] bounce: pool size: 64 pages [0.263356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [0.263727] io scheduler mq-deadline registered [0.283391] simple-framebuffer 3eaf0000.framebuffer: framebuffer at 0x3eaf0000, 0x10a800 bytes [0.283472] simple-framebuffer 3eaf0000.framebuffer: format=a8r8g8b8, mode=656x416x32, linelength=2624 [0.288121] Console: switching to colour frame buffer device 82x26 [0.294898] simple-framebuffer 3eaf0000.framebuffer: fb0: simplefb registered! [0.311925] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [0.318953] Serial: AMBA driver [0.323459] STM32 USART driver initialized [0.328984] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [0.334289] mousedev: PS/2 mouse device common for all mice [0.342913] ledtrig-cpu: registered to indicate activity on CPUs [0.347249] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [0.353019] NET: Registered PF_INET6 protocol family [0.364084] Segment Routing with IPv6 [0.367186] In-situ OAM (IOAM) with IPv6 [0.370208] mip6: Mobile IPv6 [0.373100] NET: Registered PF_PACKET protocol family [0.376284] mpls_gso: MPLS GSO support [0.379688] ThumbEE CPU extension supported. [0.382580] Registering SWP/SWPB emulation handler [0.386526] registered taskstats version 1 [0.389453] Loading compiled-in X.509 certificates [1.812662] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [1.818468] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [1.828651] zswap: loaded using pool lzo/zbud [1.832845] Key type .fscrypt registered [1.835646] Key type fscrypt-provisioning registered [1.843752] Key type encrypted registered [1.846419] AppArmor: AppArmor sha1 policy hashing enabled [1.849104] ima: No TPM chip found, activating TPM-bypass! [1.851763] ima: Allocated hash algorithm: sha256 [1.854437] ima: No architecture policies found [1.857083] evm: Initialising EVM extended attributes: [1.859595] evm: security.selinux [1.862015] evm: security.SMACK64 (disabled) [1.864414] evm: security.SMACK64EXEC (disabled) [1.866750] evm: security.SMACK64TRANSMUTE (disabled) [1.869071] evm: security.SMACK64MMAP (disabled) [1.871375] evm: security.apparmor [1.873623] evm: security.ima [1.875816] evm: security.capability [1.877955] evm: HMAC attrs: 0x1 [3.652817] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [4.741647] printk: console [ttyAMA0] enabled [4.750835] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:04:36 [4.774274] Waiting for root device /dev/mmcblk0p2... ``` Et je reste coincé là… Si je remplace dans le fichier _/boot/firmware/cmdline.txt_ : ``` root=/dev/mmcblk0p2 ``` par ``` root=PARTUUID="3515804e-02" ``` j’ai le même problème : ``` [4.792483] Waiting for root device PARTUUID="3515804e-02"... ``` Quelqu’un sait ce qui ne va pas ? ---
**Author:** ![libresurf](https://www.debian-fr.org/user_avatar/www.debian-fr.org/libresurf/32/5259_2.png) [@libresurf](https://www.debian-fr.org/u/libresurf)\ **Post date:** [Septembre 23, 2023, 1:25 UTC](https://www.debian-fr.org/t/creer-sa-propre-image-debian-pour-le-raspberry-pi-2-b/88842/3 "2023-09-23T13:25:19Z")
Dans les logs du noyau, j’ai ça : ``` [0.254203] Trying to unpack rootfs image as initramfs... [0.254295] Initramfs unpacking failed: invalid magic at start of compressed archive ``` À priori, le noyau n’arrive pas à exploiter le _initramfs_… ---
**Author:** ![libresurf](https://www.debian-fr.org/user_avatar/www.debian-fr.org/libresurf/32/5259_2.png) [@libresurf](https://www.debian-fr.org/u/libresurf)\ **Post date:** [Septembre 23, 2023, 4:56 UTC](https://www.debian-fr.org/t/creer-sa-propre-image-debian-pour-le-raspberry-pi-2-b/88842/4 "2023-09-23T16:56:10Z")
Après des heures à me prendre la tête sur le problème, j’ai décidé de tester mon installation non plus sous **bookworm** mais sous **trixie** et ÇA MARCHE !!! 😃 😃 😃 Il doit y avoir un bug quelque part avec **bookworm** … Donc la paquet _raspi-firmware_ fonctionne correctement sous **trixie**. Et il faut passer le paramètre ``` console=serial0,115200 ``` dans _/boot/firmware/cmdline.txt_ pour avoir la console UART. ---
**Author:** ![loicmtp](https://www.debian-fr.org/user_avatar/www.debian-fr.org/loicmtp/32/13315_2.png) [@loicmtp](https://www.debian-fr.org/u/loicmtp)\ **Post date:** [Septembre 24, 2023, 5:55 UTC](https://www.debian-fr.org/t/creer-sa-propre-image-debian-pour-le-raspberry-pi-2-b/88842/5 "2023-09-24T05:55:42Z")
> [@libresurf](#): > > Est-ce quelqu’un a déjà réussi à préparer sa propre image pour le Raspberry Pi 2 B à partir uniquement des dépôts de debian ? Bonjour LS, le meilleur moyen de créer sa propre distri est de loin LFS > **[LFS 12.0 est disponible](https://www.fr.linuxfromscratch.org/01-09-2023-lfs-12-0-est-disponible/)** > > Nous sommes heureux de vous annoncer la sortie de LFS 12.0 conjointement en version SysV et Systemd, ainsi que la sortie de BLFS 12.0 dans ces deux versions. Il s’agit d’une version majeure de LFS et BLFS. Cette nouvelle version contient une mise à...