# Démarrer Bluetooth **URL:** \ **Category:** Support Debian\ **Created:** [Octobre 27, 2023, 3:51 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035 "2023-10-27T15:51:52Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 3, 2023, 8:32 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/41 "2023-11-03T20:32:30Z")
En cherchant je suis tombé sur [ce fil](https://www.debian-fr.org/t/son-bluetooth-de-mauvaise-qualite-debian-buster/77510) , y aurait-il des commandes à tester ? J’ai fait joel@hp600:~$ sudo alsactl init Found hardware: « HDA-Intel » « Conexant CX20952 » « HDA:14f151d7,103c82b5,00100000 HDA:8086280b,80860101,00100000 » « 0x103c » « 0x82b5 » Hardware is initialized using a generic method joel@hp600:~$ ``` joel@hp600:~$ sudo apt policy pulseaudio-module-bluetooth [sudo] Mot de passe de joel : pulseaudio-module-bluetooth: Installé : 16.1+dfsg1-2+b1 Candidat : 16.1+dfsg1-2+b1 Table de version : *** 16.1+dfsg1-2+b1 500 500 http://deb.debian.org/debian bookworm/main amd64 Packages 100 /var/lib/dpkg/status joel@hp600:~$ fuser -v /dev/snd/* UTIL. PID ACCÈS COMMANDE /dev/snd/controlC0: joel 12119 F.... wireplumber /dev/snd/seq: joel 12117 F.... pipewire joel@hp600:~$ ``` ---
**Author:** ![Clochette](https://www.debian-fr.org/user_avatar/www.debian-fr.org/clochette/32/8757_2.png) [@Clochette](https://www.debian-fr.org/u/Clochette)\ **Post date:** [Novembre 3, 2023, 8:53 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/42 "2023-11-03T20:53:08Z")
> [@degolarson](#): > > j’ai ouvert un fichier audio avec lecteur VLC, mais pas moyen de passer sur l’enceinte en appuyant sur la touche BT de l’enceinte ( comme sur la tablette ) ça ne fait que déconnecter Une fois appairer il na faut plus appuyer sur l’enceinte mais vous assurer que l’enceinte soit la sortie son sélectionné. ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 4, 2023, 2:43 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/43 "2023-11-04T14:43:37Z")
> [@degolarson](#): > > Quand je vais voir dans applications/paramètres/contrôle du volume j’ai un message > `connexion à PulseAudio. Veuillez patienter` sauf que ça fait un bon moment que je patiente et dans le tableau de bord l’cône volume est avec une croix : volume coupé Je n’ai pas trouvé de solution à ce problème, existe-t-il une ligne de commande pour ouvrir le panneau de contrôle, autre que `pavucontrol` qui donne le même message ? Autre sujet enquiquinant j’aurais bien voulu voir ce panneau en session live 12.2 mais impossible de retrouver la bonne touche F pour le choix de boot et démarrer sur la clé usb. F10 me renvoie aux réglages du Bios mais pas au choix de boot , F3 et F6 à des trucs que je ne comprends pas. J’ai bien peur d’avoir modifié sans le vouloir des réglages du Bios .. ---
**Author:** ![pled](https://www.debian-fr.org/user_avatar/www.debian-fr.org/pled/32/11791_2.png) [@pled](https://www.debian-fr.org/u/pled)\ **Post date:** [Novembre 4, 2023, 2:58 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/44 "2023-11-04T14:58:03Z")
Peut-être F12, c’est le selon les BIOS. Mais si tu arrives au BIOS, tu peux y définir ton ordre de boot. ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 4, 2023, 3:30 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/45 "2023-11-04T15:30:31Z")
ouf j `ai retrouve c est au demarrage il faut cliquer sur la ligne UEFI Firmware Settings l `ecran s`eteint puis se rallume sur le start up avec tous les choix possibles donc en session live voila le panneau ouvert avec `pavucontrol` [ ![](https://imgur.com/JuSL1B7.png) ](https://imgur.com/JuSL1B7.png) la il est sur **Speakers** l`autre choix est **Headphones (unplugged)** ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 4, 2023, 3:47 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/46 "2023-11-04T15:47:32Z")
et la configuration [ ![](https://imgur.com/uMk8tLH.png) ](https://imgur.com/uMk8tLH.png) ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 4, 2023, 3:52 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/47 "2023-11-04T15:52:01Z")
Toujours dans la session live `blueman` et `pulseaudio-module-bluetooth` ne sont pas installes ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 4, 2023, 4:07 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/48 "2023-11-04T16:07:35Z")
Je les ai installes et j`ai lance bluetooth manager l enceinte JBL est bien detectee et connectee mais elle se deconnecte au bout de 5 secondes ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 5, 2023, 1:14 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/49 "2023-11-05T13:14:33Z")
Bonjour Je suis revenu à ma session ordinaire 12.2 hors cléusb live J’essaie d’investiguer pour faire fonctionner la connexion de pulseaudio , j’aurais préféré ouvrir un nouveau fil mais pas d’icône nouveau sujet ``` joel@hp600:~$ pactl set-sink-mute @DEFAULT_SINK@ toggle Échec lors de la connexion : Connexion refusée Échec de pa_context_connect() : Connexion refusée joel@hp600:~$ pactl set-sink-volume @DEFAULT_SINK@ +10% Échec lors de la connexion : Connexion refusée Échec de pa_context_connect() : Connexion refusée joel@hp600:~$ pactl set-sink-volume @DEFAULT_SINK@ -10% Échec lors de la connexion : Connexion refusée Échec de pa_context_connect() : Connexion refusée joel@hp600:~$ joel@hp600:~$ systemctl --user restart pulseaudio.service Job for pulseaudio.service failed because the control process exited with error code. See "systemctl --user status pulseaudio.service" and "journalctl --user -xeu pulseaudio.service" for details. joel@hp600:~$ systemctl --user status pulseaudio.service × pulseaudio.service - Sound Service Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; preset:> Active: failed (Result: exit-code) since Sun 2023-11-05 14:08:14 CET; 1min> TriggeredBy: × pulseaudio.socket Process: 9076 ExecStart=/usr/bin/pulseaudio --daemonize=no --log-target=jou> Main PID: 9076 (code=exited, status=1/FAILURE) CPU: 51ms nov. 05 14:08:14 hp600 systemd[1461]: Failed to start pulseaudio.service - Soun> nov. 05 14:08:14 hp600 systemd[1461]: pulseaudio.service: Scheduled restart job> nov. 05 14:08:14 hp600 systemd[1461]: Stopped pulseaudio.service - Sound Servic> nov. 05 14:08:14 hp600 systemd[1461]: pulseaudio.service: Start request repeate> nov. 05 14:08:14 hp600 systemd[1461]: pulseaudio.service: Failed with result 'e> nov. 05 14:08:14 hp600 systemd[1461]: Failed to start pulseaudio.service - Soun> lines 1-14/14 (END) ``` merci ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 5, 2023, 1:17 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/50 "2023-11-05T13:17:48Z")
``` joel@hp600:~$ journalctl --user -xeu pulseaudio.service ░░ Support: https://www.debian.org/support ░░ ░░ Le redémarrage automatique de l'unité (unit) UNIT a été planifié, en ░░ raison de sa configuration avec le paramètre Restart=. nov. 05 14:08:14 hp600 systemd[1461]: Stopped pulseaudio.service - Sound Servic> ░░ Subject: L'unité (unit) UNIT a terminé son arrêt ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ L'unité (unit) UNIT a terminé son arrêt. nov. 05 14:08:14 hp600 systemd[1461]: pulseaudio.service: Start request repeate> nov. 05 14:08:14 hp600 systemd[1461]: pulseaudio.service: Failed with result 'e> ░░ Subject: Unit failed ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ The unit UNIT has entered the 'failed' state with result 'exit-code'. nov. 05 14:08:14 hp600 systemd[1461]: Failed to start pulseaudio.service - Soun> ░░ Subject: L'unité (unit) UNIT a échoué ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ L'unité (unit) UNIT a échoué, avec le résultat failed. ``` ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 5, 2023, 3:10 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/51 "2023-11-05T15:10:47Z")
Trouvé [cette FAQ](https://www.freedesktop.org/wiki/Software/PulseAudio/FAQ/#igetthiserrormessage:connectionrefused) et ce test : pulseaudio --dump-modules ````auto module-allow-passthrough When a passthrough stream is requested, route all the other streams to a dummy device module-alsa-card ALSA Card module-alsa-sink ALSA Sink module-alsa-source ALSA Source module-always-sink Garde toujours au moins une destination même si elle est vide module-always-source Always keeps at least one source loaded even if it's a null one module-augment-properties Augment the property sets of streams with additional static information module-bluetooth-discover Detect available Bluetooth daemon and load the corresponding discovery module module-bluetooth-policy Policy module to make using bluetooth devices out-of-the-box easier module-bluez5-device BlueZ 5 Bluetooth audio sink and source module-bluez5-discover Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers module-card-restore Automatically restore profile of cards module-cli Command line interface module-cli-protocol-tcp Command line interface protocol (TCP sockets) module-cli-protocol-unix Command line interface protocol (UNIX sockets) module-combine Compatibility module (module-combine rename) module-combine-sink Combine multiple sinks to one module-dbus-protocol D-Bus interface module-default-device-restore Automatically restore the default sink and source module-detect Detect available audio hardware and load matching drivers module-device-manager Keep track of devices (and their descriptions) both past and present and prioritise by role module-device-restore Automatically restore the volume/mute state of devices module-echo-cancel Echo Cancellation module-filter-apply Load filter sinks automatically when needed module-filter-heuristics Detect when various filters are desirable module-http-protocol-tcp HTTP (TCP sockets) module-http-protocol-unix HTTP (UNIX sockets) module-intended-roles Automatically set device of streams based on intended roles of devices module-ladspa-sink Destination virtuelle LADSPA module-loopback Loopback from source to sink module-match Playback stream expression matching module module-mmkbd-evdev Multimedia keyboard support via Linux evdev module-native-protocol-fd Native protocol autospawn helper module-native-protocol-tcp Native protocol (TCP sockets) module-native-protocol-unix Native protocol (UNIX sockets) module-null-sink Horloge de la destination vide module-null-source Clocked NULL source module-oss OSS Sink/Source module-pipe-sink UNIX pipe sink module-pipe-source UNIX pipe source module-position-event-sounds Position event sounds between L and R depending on the position on screen of the widget triggering them. module-remap-sink Virtual channel remapping sink module-remap-source Virtual channel remapping source module-rescue-streams This module is obsolete, please remove it from your configuration. module-role-cork Mute & cork streams with certain roles while others exist module-role-ducking Apply a ducking effect based on streams roles module-rtp-recv Receive data from a network via RTP/SAP/SDP module-rtp-send Read data from source and send it to the network via RTP/SAP/SDP module-rygel-media-server UPnP MediaServer Plugin for Rygel module-simple-protocol-tcp Simple protocol (TCP sockets) module-simple-protocol-unix Simple protocol (UNIX sockets) module-sine Sine wave generator module-sine-source Sine wave generator source module-stream-restore Automatically restore the volume/mute/device state of streams module-suspend-on-idle When a sink/source is idle for too long, suspend it module-switch-on-connect When a sink/source is added, switch to it or conditionally switch to it module-switch-on-port-available Switches ports and profiles when devices are plugged/unplugged module-systemd-login Create a client for each login session of this user module-tunnel-sink Tunnel module for sinks module-tunnel-sink-new Create a network sink which connects via a stream to a remote PulseAudio server module-tunnel-source Tunnel module for sources module-tunnel-source-new Create a network source which connects via a stream to a remote PulseAudio server module-udev-detect Detect available audio hardware and load matching drivers module-virtual-sink Virtual sink module-virtual-source Virtual source module-virtual-surround-sink Destination surround virtuelle module-volume-restore Compatibility module module-x11-bell X11 bell interceptor module-x11-cork-request Synthesize X11 media key events when cork/uncork is requested module-x11-publish X11 credential publisher module-x11-xsmp X11 session management joel@hp600:~$ ``` ```` ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 6, 2023, 9:31 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/52 "2023-11-06T09:31:10Z")
Bonjour J’ai lu divers posts sur « connexion Pulseaudio » essentiellement dans des forums Ubuntu, tut le monde parle d’absence de son Mais mon seul problème est le réglage du son, pas l’absence de son ```auto joel@hp600:~$ start-pulseaudio-x11 Échec lors de la connexion : Connexion refusée Échec de pa_context_connect() : Connexion refusée joel@hp600:~$ sudo start-pulseaudio-x11 [sudo] Mot de passe de joel : Échec lors de la connexion : Connexion refusée Échec de pa_context_connect() : Connexion refusée joel@hp600:~$ pulseaudio E: [pulseaudio] main.c: Unknown command: #!/usr/bin/pulseaudio -nF E: [pulseaudio] main.c: Failed to initialize daemon due to errors while executing startup commands. Source of commands: /etc/pulse/default.pa joel@hp600:~$ ``` edition de /etc/pulse/defaut.pa ```auto #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see . # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GSettings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gsettings.so .nofail load-module module-gsettings .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply ### Make some devices default #set-default-sink output #set-default-source input ``` merci ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 6, 2023, 12:14 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/53 "2023-11-06T12:14:37Z")
Je suis allé voir [ce fil](https://stackovercoder.fr/ubuntu/879037/pavucontrol-stuck-at-establishing-connection-to-pulseaudio-please-wait) mais je ne sais pas aller plus loin merci ---
**Author:** ![pled](https://www.debian-fr.org/user_avatar/www.debian-fr.org/pled/32/11791_2.png) [@pled](https://www.debian-fr.org/u/pled)\ **Post date:** [Novembre 7, 2023, 9:21 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/54 "2023-11-07T09:21:22Z")
Fais surtout attention à ne pas « casser » le serveur de son sur ta machine… À ce stade, à mon avis, ton problème, c’est la déconnexion systématique de tes enceintes JBL (connexion, déconnexion 5 sec. plus tard). Il faut partir de là. À ta place, je reprendrais tout à zéro, calmement, en te servant de ce que tu as appris. Voilà [une page](https://www.makeuseof.com/manage-bluetooth-linux-with-bluetoothctl/) qui explique comment utiliser la commande `bluetoothctl`: lis-la tranquillement, puis applique les commandes une par une. Tu peux commencer par la commande `remove`de ton périphérique pour bien repartir de zéro. Ensuite `scan on`, puis `pair`, et enfin `paired-devices`, et même `trust`. Et copies ici l’intégralité de la sortie pour bien comprendre ce qui se passe, et pas seulement ce que tu juges utile. Autre suggestion : Au début de ce post, tu parles d’un dongle Bluetooth, que tu as finalement retiré puisque le PC dispose du Bluetooth. Si la manip ci-dessus échoue, tu peux aussi tenter d’utiliser ce dongle au lieu du bluetooth intégré sur ton PC ? Ça permettrait de voir si le problème ne vient pas de ce côté. Pour ce faire, il vaut mieux rentrer dans le BIOS et désactiver le bluetooth intégré, et démarrer avec le dongle. Tu devrais voir une autre adresse MAC pour le controller. Puis refaire les manips ci-dessus pour tes enceintes. Voilà en tout cas ce que je ferais… Question subsidiaire : ton live USB, tu l’as fait avec quel environnement de bureau ? ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 7, 2023, 9:34 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/55 "2023-11-07T09:34:28Z")
bonjour > [@pled](#): > > Voilà en tout cas ce que je ferais… > Question subsidiaire : ton live USB, tu l’as fait avec quel environnement de bureau ? Je vais faire comme tu dis la clé live contient debian-live-12.2.0-amd64-xfce ---
**Author:** ![pled](https://www.debian-fr.org/user_avatar/www.debian-fr.org/pled/32/11791_2.png) [@pled](https://www.debian-fr.org/u/pled)\ **Post date:** [Novembre 7, 2023, 9:37 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/56 "2023-11-07T09:37:36Z")
N’hésites pas à tester aussi avec un live Gnome : comme te le disais Clochette, XFCE est à la traîne… Au moins tu élimineras un problème potentiel avec le DE ? (c’est toujours bien de réduire le « scope » dans une recherche de panne). ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 7, 2023, 3:22 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/57 "2023-11-07T15:22:52Z")
Voilà (toujours session ordinaire 12.2) joel@hp600:~$ sudo systemctl status bluetooth [sudo] Mot de passe de joel : ● bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; preset: en\> Active: active (running) since Tue 2023-11-07 09:57:19 CET; 5h 5min ago Docs: man:bluetoothd(8) Main PID: 837 (bluetoothd) Status: « Running » Tasks: 1 (limit: 9283) Memory: 2.7M CPU: 44ms CGroup: /system.slice/bluetooth.service └─837 /usr/libexec/bluetooth/bluetoothd ``` nov. 07 09:57:19 hp600 bluetoothd[837]: profiles/audio/mcp.c:mcp_init() D-Bus e> nov. 07 09:57:19 hp600 bluetoothd[837]: src/plugin.c:plugin_init() Failed to in> nov. 07 09:57:19 hp600 bluetoothd[837]: profiles/audio/bap.c:bap_init() D-Bus e> nov. 07 09:57:19 hp600 bluetoothd[837]: src/plugin.c:plugin_init() Failed to in> nov. 07 09:57:19 hp600 bluetoothd[837]: Bluetooth management interface 1.22 ini> nov. 07 09:57:19 hp600 systemd[1]: Started bluetooth.service - Bluetooth servic> nov. 07 09:57:19 hp600 bluetoothd[837]: profiles/sap/server.c:sap_server_regist> nov. 07 09:57:19 hp600 bluetoothd[837]: sap-server: Operation not permitted (1) nov. 07 12:53:43 hp600 bluetoothd[837]: Controller resume with wake event 0x0 nov. 07 14:29:48 hp600 bluetoothd[837]: Controller resume with wake event 0x0 lines 1-22/22 (END) ``` ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 7, 2023, 3:23 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/58 "2023-11-07T15:23:26Z")
``` joel@hp600:~$ bluetoothctl Agent registered [bluetooth]# scan on Discovery started [CHG] Controller 34:41:5D:1E:71:6F Discovering: yes [NEW] Device 2C:FD:B4:11:C7:B7 JBL GO Essential [NEW] Device 08:FB:EA:19:7A:45 Bouygtel4K [NEW] Device C0:28:8D:85:BE:71 C0-28-8D-85-BE-71 [CHG] Device 08:FB:EA:19:7A:45 UUIDs: 0000110a-0000-1000-8000-00805f9b34fb [CHG] Device 08:FB:EA:19:7A:45 UUIDs: 0000110c-0000-1000-8000-00805f9b34fb [CHG] Device 08:FB:EA:19:7A:45 UUIDs: 0000110e-0000-1000-8000-00805f9b34fb [CHG] Device 08:FB:EA:19:7A:45 UUIDs: 00001200-0000-1000-8000-00805f9b34fb [CHG] Device 08:FB:EA:19:7A:45 UUIDs: 00000000-0000-0000-0000-000000000000 [NEW] Device FD:2A:15:BE:6E:37 Hue Lamp [NEW] Device 28:11:A5:8E:E6:A7 LE-Bose Color II SoundLink [CHG] Device C0:28:8D:85:BE:71 ManufacturerData Key: 0x0003 [CHG] Device C0:28:8D:85:BE:71 ManufacturerData Value: 00 a5 58 00 00 06 d8 68 c3 30 e9 1a c0 28 8d 85 ..X....h.0...(.. be 71 32 .q2 [NEW] Device 5C:F2:A4:5C:8D:1A 5C-F2-A4-5C-8D-1A ``` ---
**Author:** ![degolarson](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/d/5f9b8f/32.png) [@degolarson](https://www.debian-fr.org/u/degolarson)\ **Post date:** [Novembre 7, 2023, 3:24 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/59 "2023-11-07T15:24:10Z")
``` [bluetooth]# pair 2C:FD:B4:11:C7:B7 Attempting to pair with 2C:FD:B4:11:C7:B7 [CHG] Device 2C:FD:B4:11:C7:B7 Connected: yes [CHG] Device 2C:FD:B4:11:C7:B7 Bonded: yes [CHG] Device 2C:FD:B4:11:C7:B7 UUIDs: 0000110b-0000-1000-8000-00805f9b34fb [CHG] Device 2C:FD:B4:11:C7:B7 UUIDs: 0000110c-0000-1000-8000-00805f9b34fb [CHG] Device 2C:FD:B4:11:C7:B7 UUIDs: 0000110e-0000-1000-8000-00805f9b34fb [CHG] Device 2C:FD:B4:11:C7:B7 ServicesResolved: yes [CHG] Device 2C:FD:B4:11:C7:B7 Paired: yes Pairing successful ``` ---
**Author:** ![Clochette](https://www.debian-fr.org/user_avatar/www.debian-fr.org/clochette/32/8757_2.png) [@Clochette](https://www.debian-fr.org/u/Clochette)\ **Post date:** [Novembre 7, 2023, 3:25 UTC](https://www.debian-fr.org/t/demarrer-bluetooth/89035/60 "2023-11-07T15:25:00Z")
l’appairage est ok et après avoir sélectionner l’enceinte dans pavucontrol il y a du son ? [Page précédente](https://www.debian-fr.org/t/demarrer-bluetooth/89035.md?page=2) [Page suivante](https://www.debian-fr.org/t/demarrer-bluetooth/89035.md?page=4)