ok, je vais donc inverser les cables et modifier mon /etc/network/interfaces pour réaliser la config comme sur le schéma que j’avais transmis. et je donne le résultat.
Voila,
J’inverse donc mon cable de eth0 vers le modem, puis je modifie la config comme ci-dessous, la a ce moment ou j’écris, j’ai remis eth1 sur le modem,
[quote]
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
192.168.10.0 * 255.255.255.0 U 0 0 0 eth1
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
#ifconfig
eth0 Link encap:Ethernet HWaddr 00:08:a1:36:1d:ab
inet adr:192.168.0.20 Bcast:192.168.0.255 Masque:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interruption:18 Adresse de base:0xe800
eth1 Link encap:Ethernet HWaddr 00:22:15:90:bc:ec
inet adr:192.168.10.57 Bcast:192.168.10.255 Masque:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:1
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interruption:219
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:76 errors:0 dropped:0 overruns:0 frame:0
TX packets:76 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:7076 (6.9 KiB) TX bytes:7076 (6.9 KiB)
#interfaces:
iface eth1 inet static
address 192.168.10.57
netmask 255.255.255.0
#gateway 192.168.0.1
auto eth1
iface eth0 inet static
address 192.168.0.20
netmask 255.255.255.0
gateway 192.168.0.1
auto eth0[/quote]
Là, c’est bon aussi. Donc maintenant, de cette machine tu arrives bien à aller sur
- internet
- les machines 192.168.10.ce que tu veux??
Ben oui que c’est bon la config, mais je n’arrive pas a me connecter a internet, c’est bien le bug que je rencontre, j’ai fouillé dans tout mes cartons, j’ai pas trouvé une autre carte. Donc je ne suis pas trop null si c’est ma carte ethernet pci, ou mon pc qui n’accepte pas de gerer ma carte pci.
Ouf !
je me procure une autre carte prochainement.
Merci pour ton aide, j’en ai quand même appris pas mal en quelques jour.
Est ce que tu ping 192.168.0.1? Puis 82.66.248.156?
Dans cette config, je te jure, je ne ping rien vers l’extérieur, ni meme la passerelle.
Je ne te donne pas le resultat, j’ai repris mon config normale, avec eth1 ma connection au routeur.
Je voit que tu ne veut pas que j’achete une autre carte réseau, au rique que je m’aperçoive d’avoir le meme problème avec la nouvelle et que tu n’aurait pas su m’aiguiller, mais je te jure je ne t’en voudrait surement pas, a la vue de ta participation, déja qui me géne. car meme si je creer de nouveau sujet pour d’autre question, c’est bien parce-que je me rend compte par celui que l’on traite en ce moment vient de m’apprendre un bout de la connexion réseau.
Je vais quand meme me procurer une nouvelle carte !
Tu es sûr de l’adresse IP de ta passerelle avant d’investir dans une carte?
Bon ce n’est effectivement pas la carte ethernet, mais le noyau qui ne gére pas ce type de chose, autant il faut installer le driver pour avoir acces a la carte interne a la carte mere,
http://www.linuxtested.com/results/asus_p5ql-e.html
http://www.ldlc.com/avis-internautes/veralinux/133052/asustek-p5ql-pro/carte-mere-ayant-beaucoup-de-possibiltes-pour-un-prix-raisonnable.html
La carte est bien détectée mais pas utilisable. tout comme la nouvelle je vais donc la rendre en accord avec le commercant.
Je ne trouve de driver a part celui fourni avec le cd de la carte mére.
Donne le résultat de lspci et lspci -n que je vois ces cartes…
chui bete! faut que je la remette.
Voila J’avais posté sans avoir remis la carte.
lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)
02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
05:00.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
05:01.0 Communication controller: Conexant HSF 56k HSFi Data/Fax (rev 01)
05:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31)
05:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
lspci -v
[quote]00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 82d3
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa000000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [88] Subsystem: ASUSTeK Computer Inc. Device 82d3
Capabilities: [80] Power Management version 3
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [140] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at a800 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at a880 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ac00 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] Vendor Specific Information <?>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
Subsystem: ASUSTeK Computer Inc. Device 8357
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82d4
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82d4
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82d4
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at a080 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at a400 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at a480 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] Vendor Specific Information <?>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 9000 [size=8]
I/O ports at 8c00 [size=4]
I/O ports at 8880 [size=8]
I/O ports at 8800 [size=4]
I/O ports at 8480 [size=16]
I/O ports at 8400 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: medium devsel, IRQ 18
Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at a000 [size=8]
I/O ports at 9c00 [size=4]
I/O ports at 9880 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9480 [size=16]
I/O ports at 9400 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 344c
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at bc00 [size=128]
[virtual] Expansion ROM at fe8e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
Subsystem: ASUSTeK Computer Inc. Device 8304
Flags: bus master, fast devsel, latency 0, IRQ 1275
Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at cc00 [size=128]
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [180] Device Serial Number ff-15-22-00-ec-bc-90-ff
Kernel driver in use: ATL1E
Kernel modules: atl1e
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 8352
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at feae0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint, MSI 01
Kernel driver in use: ahci
Kernel modules: ahci
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 8352
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at dc00 [size=8]
I/O ports at d880 [size=4]
I/O ports at d800 [size=8]
I/O ports at d480 [size=4]
I/O ports at d400 [size=16]
Capabilities: [68] Power Management version 2
Kernel driver in use: JMicron IDE
Kernel modules: jmicron
05:00.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
Subsystem: Hauppauge computer works Inc. WinTV HVR-1110
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Kernel driver in use: saa7134
Kernel modules: saa7134
05:01.0 Communication controller: Conexant HSF 56k HSFi Data/Fax (rev 01)
Subsystem: Device 1767:000b
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at febe0000 (32-bit, non-prefetchable) [size=64K]
I/O ports at ec00 [size=8]
Capabilities: [40] Power Management version 2
05:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31)
Subsystem: Device 4554:434e
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at e800 [size=256]
Memory at febff400 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 88000000 [disabled] [size=256K]
Capabilities: [50] Power Management version 2
Kernel driver in use: dmfe
Kernel modules: dmfe, tulip
05:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8294
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci1394
Kernel modules: ohci1394
[/quote]
J’ai tout mis
[quote=“casimir”]
J’ai tout mis[/quote]
Non, il manque le plus important: lspci -n (avec la carte litigieuse dedans) et lspci avec cette carte pour la repérer. Je t’expliquerais pourquoi je demande ça.
solé, je pensait que tu t’était trompé, franchement je me prend pour qui, pour penser ca.
lspci -n
00:00.0 0600: 8086:2e20 (rev 03)
00:01.0 0604: 8086:2e21 (rev 03)
00:1a.0 0c03: 8086:3a37
00:1a.1 0c03: 8086:3a38
00:1a.2 0c03: 8086:3a39
00:1a.7 0c03: 8086:3a3c
00:1b.0 0403: 8086:3a3e
00:1c.0 0604: 8086:3a40
00:1c.4 0604: 8086:3a48
00:1c.5 0604: 8086:3a4a
00:1d.0 0c03: 8086:3a34
00:1d.1 0c03: 8086:3a35
00:1d.2 0c03: 8086:3a36
00:1d.7 0c03: 8086:3a3a
00:1e.0 0604: 8086:244e (rev 90)
00:1f.0 0601: 8086:3a16
00:1f.2 0101: 8086:3a20
00:1f.3 0c05: 8086:3a30
00:1f.5 0101: 8086:3a26
01:00.0 0300: 10de:0421 (rev a1)
02:00.0 0200: 1969:1026 (rev b0)
03:00.0 0106: 197b:2363 (rev 03)
03:00.1 0101: 197b:2363 (rev 03)
05:00.0 0480: 1131:7133 (rev d1)
05:01.0 0780: 14f1:2f02 (rev 01)
05:02.0 0200: 1282:9102 (rev 31)
05:03.0 0c00: 11c1:5811 (rev 70)
Je poste les résultats et je réfléchis aprés,
Ce serait gérer par le module tulip ou le module dmfe. Il faut donc que tu en supprimes un je pense, je te donnerais plus de détails plus tard.
En gros
lspci indique où est la carte (ici 05:02.0 )
lspci -n te donne le code constructeur/produit de la carte: ici 1282:9102
Tu peux savoir qi ton noyau gère cette carte en faisant les commandes suivantes:
$ cd /lib/modules/2.6.26-1-686/
/lib/modules/2.6.26-1-686$ grep 1282 *map | grep 9102
modules.pcimap:dmfe 0x00001282 0x00009102 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
modules.pcimap:tulip 0x00001282 0x00009102 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
/lib/modules/2.6.26-1-686$ Où l’on voit que deux modules choppent la carte. Essayent avec dmfe en blacklistant tulip.
Dans, /etc/modprobe.d/blacklist j’ai rajouter la ligne.
grep 1282 *map | grep 9102
modules.pcimap:tulip 0x00001282 0x00009102 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
modules.pcimap:dmfe 0x00001282 0x00009102 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
grep 1969 *map | grep 1026
modules.pcimap:[color=#FF0000]atl1e[/color] 0x00001969 0x00001026 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0atl1e est le driver de la carte graphique. il ne prend pas en charge la carte pci.
[quote=“casimir”]
atl1e est le driver de la carte graphique. il ne prend pas en charge la carte pci.[/quote]Non, tu confonds, c’est un driver de carte Ethernet, tout va bien.
AIE je ne confond pas, il fallait lire, carte ethernet integrée au lieu de carte graphique.
Je ne confond pas puisque je du l’installer pour avoir acces a la prise ethernet de la carte mére.
Bon, si je ne m’applique pas, ca va pas aider. 