# Erreur «/boot/vmlinuz-4.19.0-23-amd64» non disponible **URL:** \ **Category:** Support Debian\ **Created:** [Avril 29, 2023, 1:59 UTC](https://www.debian-fr.org/t/erreur-boot-vmlinuz-4-19-0-23-amd64-non-disponible/88154 "2023-04-29T13:59:31Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![josephtux](https://www.debian-fr.org/user_avatar/www.debian-fr.org/josephtux/32/3985_2.png) [@josephtux](https://www.debian-fr.org/u/josephtux)\ **Post date:** [Mai 1, 2023, 10:40 UTC](https://www.debian-fr.org/t/erreur-boot-vmlinuz-4-19-0-23-amd64-non-disponible/88154/4 "2023-05-01T10:40:08Z")
Bonjour dindoun, merci, J’ai fait _smartct -a /dev/sda_ , qui donne 5 lignes «Pre-fail». Que dois-je faire? ``` sudo smartctl -a /dev/sda smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.9.0-0.bpo.6-amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ADATA SX300 Serial Number: 2E0820014485 LU WWN Device Id: 0 000000 000000000 Firmware Version: 5.2.2 User Capacity: 256 060 514 304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 1 12:42:52 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 1) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0033 092 092 050 Pre-fail Always - 30069593271 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 31885 (83 8 0) 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 884 171 Unknown_Attribute 0x000a 000 000 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 76 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 16 181 Program_Fail_Cnt_Total 0x000a 000 000 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 043 096 000 Old_age Always - 43 (Min/Max 10/96) 195 Hardware_ECC_Recovered 0x001c 092 092 000 Old_age Offline - 30069593271 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 201 Unknown_SSD_Attribute 0x001c 092 092 000 Old_age Offline - 30069593271 204 Soft_ECC_Correction 0x001c 092 092 000 Old_age Offline - 30069593271 230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 100 231 Temperature_Celsius 0x0013 099 099 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 000 000 000 Old_age Always - 19760 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 6017 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 6017 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 7633 SMART Error Log not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ``` et smartctl -x: [smartctl-x-sda.txt](https://www.debian-fr.org/uploads/short-url/cKlMsvciMQt8PD8egBHBpWVHHlX.txt) (18,5 Ko) --- _[View the full topic](https://www.debian-fr.org/t/erreur-boot-vmlinuz-4-19-0-23-amd64-non-disponible/88154)._