# Lancement inhabituel long Version 64-Bits "Squeeze"

**URL:** <https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897>\
**Category:** Support Debian\
**Created:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897 "2016-02-21T11:43:28Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![100305](https://www.debian-fr.org/user_avatar/www.debian-fr.org/100305/32/4289_2.png) [@100305](https://www.debian-fr.org/u/100305)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/1 "2016-02-21T11:43:28Z")

</div>

Bonsoir,

Je viens d’installer sur mon Portable la version 64-bits Squeeze de la distribution Debian.  
Après avoir choisi le système d’exploitation sous GRUB, une liste in-habituellement longue de “processus” apparaît au fur et à mesure à l’ecran, avant la normale. (Se connecter en réseau sans Fil (WIFI) par exemple)

Voici les retours de commandes inspirées de “Rechercher” sur Forum:  
ifdown wlan0  
ifup -v wlan0

[code]# ifdown wlan0  
RTNETLINK answers: No such process  
Internet Systems Consortium DHCP Client 4.1.1-P1  
Copyright 2004-2010 Internet Systems Consortium.  
All rights reserved.  
For info, please visit [https://www.isc.org/software/dhcp/](https://www.isc.org/software/dhcp/)

Listening on LPF/wlan0/00:16:ea:55:e0:08  
Sending on LPF/wlan0/00:16:ea:55:e0:08  
Sending on Socket/fallback  
DHCPRELEASE on wlan0 to 192.168.1.1 port 67  
[/code]

[code]# ifup -v wlan0  
Configuring interface wlan0=wlan0 (inet)  
run-parts --verbose /etc/network/if-pre-up.d  
run-parts: executing /etc/network/if-pre-up.d/wireless-tools  
run-parts: executing /etc/network/if-pre-up.d/wpasupplicant

dhclient -v -pf /var/run/dhclient.wlan0.pid -lf /var/lib/dhcp/dhclient.wlan0.leases wlan0  
Internet Systems Consortium DHCP Client 4.1.1-P1  
Copyright 2004-2010 Internet Systems Consortium.  
All rights reserved.  
For info, please visit [https://www.isc.org/software/dhcp/](https://www.isc.org/software/dhcp/)

Listening on LPF/wlan0/00:16:ea:55:e0:08  
Sending on LPF/wlan0/00:16:ea:55:e0:08  
Sending on Socket/fallback  
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6  
DHCPOFFER from 192.168.1.1  
DHCPREQUEST on wlan0 to 255.255.255.255 port 67  
DHCPACK from 192.168.1.1  
bound to 192.168.1.11 – renewal in 38218 seconds.  
run-parts --verbose /etc/network/if-up.d  
run-parts: executing /etc/network/if-up.d/avahi-autoipd  
run-parts: executing /etc/network/if-up.d/avahi-daemon  
run-parts: executing /etc/network/if-up.d/mountnfs  
run-parts: executing /etc/network/if-up.d/wpasupplicant  
[/code]

à votre disposition,  
cdl,

---

<div class="post-metadata">

**Author:** ![loreleil](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/l/77aa72/32.png) [@loreleil](https://www.debian-fr.org/u/loreleil)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/2 "2016-02-21T11:43:28Z")

</div>

Salut,

> [@100305](#):
>
> Après avoir choisi le système d’exploitation sous GRUB, une liste in-habituellement longue de «&nbsp;processus&nbsp;» apparaît au fur et à mesure à l’ecran, avant la normale. (Se connecter en réseau sans Fil (WIFI) par exemple)

Vraiment pas clair ton post, ![:033](https://www.debian-fr.org/uploads/default/original/1X/42cd8bd0447ecac24cdff1e26fa990a5c8442791.gif "petard")

Quel est ta requête au juste ?

---

<div class="post-metadata">

**Author:** ![100305](https://www.debian-fr.org/user_avatar/www.debian-fr.org/100305/32/4289_2.png) [@100305](https://www.debian-fr.org/u/100305)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/3 "2016-02-21T11:43:32Z")

</div>

Hello,

Je veux bien vous croire!

Disons cela comme ça:

Est t’il normale que le démarrage du système soit long? (init.)

En effet, il est beaucoup plus long par rapport à la version précédemment installé, soit en 32-BIts.

merci par avance,

---

<div class="post-metadata">

**Author:** ![Tristan.T](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/t/13edae/32.png) [@Tristan.T](https://www.debian-fr.org/u/Tristan.T)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/4 "2016-02-21T11:43:41Z")

</div>

Est-ce-que tu peux nous donner ton dmesg ? (du moins celui jusqu’à ce que tout aille bien)

```auto

```

---

<div class="post-metadata">

**Author:** ![syam](https://www.debian-fr.org/user_avatar/www.debian-fr.org/syam/32/2951_2.png) [@syam](https://www.debian-fr.org/u/syam)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/5 "2016-02-21T11:43:42Z")

</div>

À vue de nez je dirais que ça vient de l’option --verbose de run-parts. En soi ça ne pose aucun problème (c’est juste des informations supplémentaires). Comment le désactiver ? Bonne question… Ton fichier /etc/default/rcS ne contiendrait pas l’option VERBOSE=yes par hasard ? Si oui, change le et mets VERBOSE=no à la place pour voir ce que ça donne.

---

<div class="post-metadata">

**Author:** ![100305](https://www.debian-fr.org/user_avatar/www.debian-fr.org/100305/32/4289_2.png) [@100305](https://www.debian-fr.org/u/100305)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/6 "2016-02-21T11:43:42Z")

</div>

Bonjour,

Voici le retour de commande passée dans le Terminal Utilisateur:  
dmesg

`[0.269908] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
[0.269910] pci_bus 0000:06: resource 1 mem: [0xc0600000-0xc07fffff]
[0.269912] pci_bus 0000:06: resource 2 pref mem [0xc0800000-0xc09fffff]
[0.269914] pci_bus 0000:07: resource 0 io: [0x4000-0x4fff]
[0.269916] pci_bus 0000:07: resource 1 mem: [0xc0a00000-0xc0bfffff]
[0.269919] pci_bus 0000:07: resource 2 pref mem [0xc0c00000-0xc0dfffff]
[0.269921] pci_bus 0000:08: resource 0 io: [0xe000-0xefff]
[0.269923] pci_bus 0000:08: resource 1 mem: [0xfea00000-0xfeafffff]
[0.269925] pci_bus 0000:08: resource 2 pref mem [0xfcf00000-0xfcffffff]
[0.269928] pci_bus 0000:09: resource 1 mem: [0xfeb00000-0xfebfffff]
[0.269930] pci_bus 0000:09: resource 3 io: [0x00-0xffff]
[0.269932] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
[0.269960] NET: Registered protocol family 2
[0.270107] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[0.271211] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[0.275060] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[0.275565] TCP: Hash tables configured (established 524288 bind 65536)
[0.275568] TCP reno registered
[0.275683] NET: Registered protocol family 1
[0.275860] pci 0000:01:00.0: Boot video device
[0.275947] Unpacking initramfs...
[0.494802] Freeing initrd memory: 9096k freed
[0.498771] Simple Boot Flag at 0x51 set to 0x1
[0.499104] audit: initializing netlink socket (disabled)
[0.499118] type=2000 audit(1334415228.495:1): initialized
[0.502161] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[0.503439] VFS: Disk quotas dquot_6.5.2
[0.503487] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[0.503568] msgmni has been set to 7934
[0.503744] alg: No test for stdrng (krng)
[0.503788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[0.503791] io scheduler noop registered
[0.503793] io scheduler anticipatory registered
[0.503795] io scheduler deadline registered
[0.503847] io scheduler cfq registered (default)
[0.503972] alloc irq_desc for 24 on node -1
[0.503974] alloc kstat_irqs on node -1
[0.503984] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[0.503990] pcieport 0000:00:01.0: setting latency timer to 64
[0.504106] alloc irq_desc for 25 on node -1
[0.504107] alloc kstat_irqs on node -1
[0.504115] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[0.504125] pcieport 0000:00:1c.0: setting latency timer to 64
[0.504263] alloc irq_desc for 26 on node -1
[0.504265] alloc kstat_irqs on node -1
[0.504273] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[0.504283] pcieport 0000:00:1c.1: setting latency timer to 64
[0.504426] alloc irq_desc for 27 on node -1
[0.504427] alloc kstat_irqs on node -1
[0.504435] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[0.504445] pcieport 0000:00:1c.2: setting latency timer to 64
[0.504585] alloc irq_desc for 28 on node -1
[0.504587] alloc kstat_irqs on node -1
[0.504595] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[0.504605] pcieport 0000:00:1c.3: setting latency timer to 64
[0.504749] alloc irq_desc for 29 on node -1
[0.504751] alloc kstat_irqs on node -1
[0.504759] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
[0.504769] pcieport 0000:00:1c.4: setting latency timer to 64
[0.504910] alloc irq_desc for 30 on node -1
[0.504912] alloc kstat_irqs on node -1
[0.504920] pcieport 0000:00:1c.5: irq 30 for MSI/MSI-X
[0.504929] pcieport 0000:00:1c.5: setting latency timer to 64
[0.506404] Linux agpgart interface v0.103
[0.506461] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[0.506808] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[0.506865] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[0.509790] i8042.c: Detected active multiplexing controller, rev 1.1.
[0.511127] serio: i8042 KBD port at 0x60,0x64 irq 1
[0.511133] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[0.511135] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[0.511138] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[0.511141] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[0.511213] mice: PS/2 mouse device common for all mice
[0.511251] rtc_cmos 00:03: RTC can wake from S4
[0.511289] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[0.511319] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[0.511331] cpuidle: using governor ladder
[0.511333] cpuidle: using governor menu
[0.511337] No iBFT detected.
[0.511618] TCP cubic registered
[0.511721] NET: Registered protocol family 10
[0.512387] Mobile IPv6
[0.512389] NET: Registered protocol family 17
[0.512462] PM: Resume from disk failed.
[0.512470] registered taskstats version 1
[0.513086] rtc_cmos 00:03: setting system clock to 2012-04-14 14:53:48 UTC (1334415228)
[0.513127] Initalizing network drop monitor service
[0.513150] Freeing unused kernel memory: 592k freed
[0.513314] Write protecting the kernel read-only data: 4244k
[0.526259] udev[56]: starting version 164
[0.550806] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[0.635811] usbcore: registered new interface driver usbfs
[0.635836] usbcore: registered new interface driver hub
[0.639930] usbcore: registered new device driver usb
[0.648360] SCSI subsystem initialized
[0.649828] ricoh-mmc: Ricoh MMC Controller disabling driver
[0.649830] ricoh-mmc: Copyright(c) Philip Langdale
[0.649855] ricoh-mmc: Ricoh MMC controller found at 0000:09:01.2 [1180:0843] (rev 12)
[0.649871] ricoh-mmc: Controller is now disabled.
[0.653011] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[0.653040] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[0.653071] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[0.653074] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[0.653101] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[0.653142] ehci_hcd 0000:00:1a.7: debug port 1
[0.654986] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[0.655005] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[0.655052] r8169 0000:08:00.0: setting latency timer to 64
[0.655120] alloc irq_desc for 31 on node -1
[0.655122] alloc kstat_irqs on node -1
[0.655140] r8169 0000:08:00.0: irq 31 for MSI/MSI-X
[0.655664] r8169 0000:08:00.0: eth0: RTL8168c/8111c at 0xffffc9000066c000, 00:22:15:71:5e:c0, XID 1c4000c0 IRQ 31
[0.657030] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[0.657057] alloc irq_desc for 20 on node -1
[0.657059] alloc kstat_irqs on node -1
[0.657064] firewire_ohci 0000:09:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[0.657123] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfddffc00
[0.664594] sdhci: Secure Digital Host Controller Interface driver
[0.664596] sdhci: Copyright(c) Pierre Ossman
[0.671939] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[0.671972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[0.671975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[0.671977] usb usb1: Product: EHCI Host Controller
[0.671979] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[0.671981] usb usb1: SerialNumber: 0000:00:1a.7
[0.672055] usb usb1: configuration #1 chosen from 1 choice
[0.672085] hub 1-0:1.0: USB hub found
[0.672094] hub 1-0:1.0: 6 ports detected
[0.672162] alloc irq_desc for 23 on node -1
[0.672164] alloc kstat_irqs on node -1
[0.672170] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[0.672194] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[0.672198] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[0.672207] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[0.672243] ehci_hcd 0000:00:1d.7: debug port 1
[0.676135] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[0.676156] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfddff800
[0.677844] libata version 3.00 loaded.
[0.691898] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[0.691927] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[0.691929] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[0.691932] usb usb2: Product: EHCI Host Controller
[0.691933] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[0.691935] usb usb2: SerialNumber: 0000:00:1d.7
[0.691992] usb usb2: configuration #1 chosen from 1 choice
[0.692023] hub 2-0:1.0: USB hub found
[0.692029] hub 2-0:1.0: 6 ports detected
[0.692083] ahci 0000:00:1f.2: version 3.0
[0.692097] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[0.692236] alloc irq_desc for 32 on node -1
[0.692238] alloc kstat_irqs on node -1
[0.692250] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[0.692296] ahci: SSS flag set, parallel bus scan disabled
[0.692332] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[0.692336] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs 
[0.692341] ahci 0000:00:1f.2: setting latency timer to 64
[0.693463] uhci_hcd: USB Universal Host Controller Interface driver
[0.715980] scsi0 : ahci
[0.716055] scsi1 : ahci
[0.716113] scsi2 : ahci
[0.716176] scsi3 : ahci
[0.716234] scsi4 : ahci
[0.716299] scsi5 : ahci
[0.716694] ata1: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff100 irq 32
[0.716698] ata2: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff180 irq 32
[0.716700] ata3: DUMMY
[0.716701] ata4: DUMMY
[0.716704] ata5: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff300 irq 32
[0.716707] ata6: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff380 irq 32
[0.716747] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[0.716755] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[0.716758] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[0.716768] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[0.716803] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[0.716838] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[0.716840] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[0.716842] usb usb3: Product: UHCI Host Controller
[0.716844] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[0.716846] usb usb3: SerialNumber: 0000:00:1a.0
[0.716914] usb usb3: configuration #1 chosen from 1 choice
[0.716943] hub 3-0:1.0: USB hub found
[0.716950] hub 3-0:1.0: 2 ports detected
[0.716995] alloc irq_desc for 21 on node -1
[0.716997] alloc kstat_irqs on node -1
[0.717002] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[0.717008] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[0.717011] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[0.717018] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[0.717050] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[0.717083] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[0.717086] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[0.717088] usb usb4: Product: UHCI Host Controller
[0.717089] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[0.717091] usb usb4: SerialNumber: 0000:00:1a.1
[0.717145] usb usb4: configuration #1 chosen from 1 choice
[0.717171] hub 4-0:1.0: USB hub found
[0.717177] hub 4-0:1.0: 2 ports detected
[0.717222] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[0.717228] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[0.717231] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[0.717238] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[0.717269] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[0.717301] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[0.717303] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[0.717305] usb usb5: Product: UHCI Host Controller
[0.717307] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[0.717309] usb usb5: SerialNumber: 0000:00:1a.2
[0.717360] usb usb5: configuration #1 chosen from 1 choice
[0.717386] hub 5-0:1.0: USB hub found
[0.717392] hub 5-0:1.0: 2 ports detected
[0.717436] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[0.717442] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[0.717445] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[0.717456] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[0.717480] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[0.717510] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[0.717512] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[0.717514] usb usb6: Product: UHCI Host Controller
[0.717516] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[0.717518] usb usb6: SerialNumber: 0000:00:1d.0
[0.717569] usb usb6: configuration #1 chosen from 1 choice
[0.717594] hub 6-0:1.0: USB hub found
[0.717601] hub 6-0:1.0: 2 ports detected
[0.717646] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[0.717652] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[0.717656] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[0.717662] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[0.717687] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[0.717717] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[0.717719] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[0.717721] usb usb7: Product: UHCI Host Controller
[0.717723] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[0.717725] usb usb7: SerialNumber: 0000:00:1d.1
[0.717776] usb usb7: configuration #1 chosen from 1 choice
[0.717802] hub 7-0:1.0: USB hub found
[0.717808] hub 7-0:1.0: 2 ports detected
[0.717853] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[0.717859] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[0.717862] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[0.717871] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[0.717896] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[0.717927] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[0.717929] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[0.717931] usb usb8: Product: UHCI Host Controller
[0.717933] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[0.717934] usb usb8: SerialNumber: 0000:00:1d.2
[0.717984] usb usb8: configuration #1 chosen from 1 choice
[0.718012] hub 8-0:1.0: USB hub found
[0.718018] hub 8-0:1.0: 2 ports detected
[0.726580] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
[0.726588] ACPI: Expecting a [Reference] package element, found type C
[0.726642] ACPI: Invalid passive threshold
[0.727637] thermal LNXTHERM:01: registered as thermal_zone0
[0.727644] ACPI: Thermal Zone [THRM] (30 C)
[0.736117] firewire_ohci: Added fw-ohci device 0000:09:01.0, OHCI version 1.0
[0.736170] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
[0.736185] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[0.737214] sdhci-pci 0000:09:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[0.738241] Registered led device: mmc0::
[0.739286] mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
[0.983936] usb 1-3: new high speed USB device using ehci_hcd and address 2
[1.036021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[1.037266] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[1.037354] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[1.037358] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[1.037978] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[1.037980] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[1.039300] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[1.039368] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[1.039371] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[1.040004] ata1.00: configured for UDMA/133
[1.040104] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
[1.116908] usb 1-3: New USB device found, idVendor=1164, idProduct=2edc
[1.116911] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1.116913] usb 1-3: Product: STK7700D
[1.116915] usb 1-3: Manufacturer: YUANRD
[1.116916] usb 1-3: SerialNumber: 0000000001
[1.116977] usb 1-3: configuration #1 chosen from 1 choice
[1.237060] firewire_core: created device fw0: GUID 001e8c00016cb452, S400
[1.396009] usb 2-5: new high speed USB device using ehci_hcd and address 3
[1.633825] usb 2-5: New USB device found, idVendor=04f2, idProduct=b029
[1.633828] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[1.633830] usb 2-5: Product: USB2.0 1.3M UVC WebCam
[1.633831] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[1.633833] usb 2-5: SerialNumber: SN0001
[1.633894] usb 2-5: configuration #1 chosen from 1 choice
[1.764025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[1.766392] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[1.766395] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[1.768151] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.B2, max UDMA/100
[1.770763] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[1.770766] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[1.772544] ata2.00: configured for UDMA/100
[1.774344] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.B2 PQ: 0 ANSI: 5
[1.876007] usb 5-1: new full speed USB device using uhci_hcd and address 2
[2.051307] usb 5-1: New USB device found, idVendor=0b05, idProduct=1751
[2.051310] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2.051312] usb 5-1: Product: BT-253
[2.051314] usb 5-1: Manufacturer: Broadcom Corp
[2.051315] usb 5-1: SerialNumber: 0015AFFD9856
[2.051371] usb 5-1: configuration #1 chosen from 1 choice
[2.292007] usb 7-1: new low speed USB device using uhci_hcd and address 2
[2.474723] usb 7-1: New USB device found, idVendor=045e, idProduct=0040
[2.474726] usb 7-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[2.474728] usb 7-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[2.474730] usb 7-1: Manufacturer: Microsoft
[2.474795] usb 7-1: configuration #1 chosen from 1 choice
[2.496020] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[2.497214] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[2.497304] ata5.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[2.497308] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[2.497923] ata5.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[2.497926] ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[2.499229] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[2.499297] ata5.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[2.499300] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[2.499949] ata5.00: configured for UDMA/133
[2.500046] scsi 4:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
[2.820345] ata6: SATA link down (SStatus 0 SControl 300)
[2.831597] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[2.831650] sd 0:0:0:0: [sda] Write Protect is off
[2.831652] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[2.831674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[2.831801] sda:
[2.832087] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[2.832137] sd 4:0:0:0: [sdb] Write Protect is off
[2.832139] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[2.832161] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[2.832275] sdb: sda1 sda2
[2.842525] sd 0:0:0:0: [sda] Attached SCSI disk
[2.849279] sdb1 sdb2 < sdb5 sdb6 >
[2.890718] sd 4:0:0:0: [sdb] Attached SCSI disk
[2.893418] usbcore: registered new interface driver hiddev
[2.898345] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[2.898348] Uniform CD-ROM driver Revision: 3.20
[2.898429] sr 1:0:0:0: Attached scsi CD-ROM sr0
[2.902436] sd 0:0:0:0: Attached scsi generic sg0 type 0
[2.902483] sr 1:0:0:0: Attached scsi generic sg1 type 5
[2.902513] sd 4:0:0:0: Attached scsi generic sg2 type 0
[2.907984] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input2
[2.908074] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1/input0
[2.908099] usbcore: registered new interface driver usbhid
[2.908101] usbhid: v2.6:USB HID core driver
[3.290689] PM: Starting manual resume from disk
[3.290693] PM: Resume from partition 8:22
[3.290694] PM: Checking hibernation image.
[3.307007] PM: Error -22 checking image file
[3.307009] PM: Resume from disk failed.
[3.354033] kjournald starting. Commit interval 5 seconds
[3.354046] EXT3-fs: mounted filesystem with ordered data mode.
[5.065640] udev[448]: starting version 164
[5.489025] ACPI: AC Adapter [AC0] (on-line)
[5.517742] asus_laptop: Asus Laptop Support version 0.42
[5.522872] asus_laptop: BSTS called, 0xe66b returned
[5.522919] asus_laptop: H17HV model detected
[5.524687] input: Asus Laptop extra buttons as /devices/virtual/input/input3
[5.525146] Registered led device: asus::touchpad
[5.525537] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[5.530617] ACPI: Battery Slot [BAT0] (battery present)
[5.656938] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[5.657255] ACPI: Sleep Button [SLPB]
[5.657308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[5.662612] ACPI: Lid Switch [LID]
[5.662671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[5.662676] ACPI: Power Button [PWRF]
[6.428609] ACPI: SSDT 00000000bffb67c0 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[6.429198] ACPI: SSDT 00000000bffb6aa0 00712 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[6.434042] Monitor-Mwait will be used to enter C-1 state
[6.439354] Monitor-Mwait will be used to enter C-2 state
[6.439363] Marking TSC unstable due to TSC halts in idle
[6.439449] processor LNXCPU:00: registered as cooling_device0
[6.439909] ACPI: SSDT 00000000bffb66f0 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[6.440341] ACPI: SSDT 00000000bffb6a10 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[6.442053] Switching to clocksource hpet
[6.444135] processor LNXCPU:01: registered as cooling_device1
[6.461362] input: PC Speaker as /devices/platform/pcspkr/input/input7
[6.675709] [drm] Initialized drm 1.1.0 20060810
[6.764621] Bluetooth: Core ver 2.15
[6.764668] NET: Registered protocol family 31
[6.764669] Bluetooth: HCI device and connection manager initialized
[6.764672] Bluetooth: HCI socket layer initialized
[7.183590] Bluetooth: Generic Bluetooth USB driver ver 0.6
[7.184232] usbcore: registered new interface driver btusb
[7.196215] cfg80211: Using static regulatory domain info
[7.196218] cfg80211: Regulatory domain: US
[7.196219] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[7.196222] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[7.196225] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[7.196227] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[7.196230] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[7.196232] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[7.196235] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[7.196436] cfg80211: Calling CRDA for country: US
[7.290175] acpi device:22: registered as cooling_device2
[7.290315] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input8
[7.290363] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[7.306716] Linux video capture interface: v2.00
[7.467455] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam (04f2:b029)
[7.470927] input: USB2.0 1.3M UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9
[7.470976] usbcore: registered new interface driver uvcvideo
[7.470979] USB Video Class driver (v0.1.0)
[7.703270] [drm] radeon kernel modesetting enabled.
[7.703327] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[7.703332] radeon 0000:01:00.0: setting latency timer to 64
[7.705828] [drm] radeon: Initializing kernel modesetting.
[7.706166] [drm] register mmio base: 0xFDEF0000
[7.706169] [drm] register mmio size: 65536
[7.706371] ATOM BIOS: PackardBell
[7.706396] [drm] Clocks initialized !
[7.706453] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[7.706455] [drm] Detected VRAM RAM=256M, BAR=256M
[7.706457] [drm] RAM width 128bits DDR
[7.706549] [TTM] Zone kernel: Available graphics memory: 2031540 kiB.
[7.706566] [drm] radeon: 256M of VRAM memory ready
[7.706567] [drm] radeon: 512M of GTT memory ready.
[7.706609] alloc irq_desc for 33 on node -1
[7.706611] alloc kstat_irqs on node -1
[7.706622] radeon 0000:01:00.0: irq 33 for MSI/MSI-X
[7.706627] radeon 0000:01:00.0: radeon: using MSI.
[7.706654] [drm] radeon: irq initialized.
[7.706656] [drm] GART: num cpu pages 131072, num gpu pages 131072
[7.707480] [drm] Loading RV635 Microcode
[7.707483] platform radeon_cp.0: firmware: requesting radeon/RV635_pfp.bin
[7.884211] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[7.884214] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[7.884288] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[7.884296] iwlagn 0000:03:00.0: setting latency timer to 64
[7.884335] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[7.909242] r600_cp: Failed to load firmware "radeon/RV635_pfp.bin"
[7.909345] [drm:r600_startup] *ERROR* Failed to load firmware!
[7.909470] radeon 0000:01:00.0: disabling GPU acceleration
[7.909641] radeon 0000:01:00.0: ffff88013c6dee00 unpin not necessary
[7.909644] radeon 0000:01:00.0: ffff88013c6dee00 unpin not necessary
[7.909658] [drm] Enabling audio support
[7.909820] [drm] Radeon Display Connectors
[7.909822] [drm] Connector 0:
[7.909823] [drm] LVDS
[7.909825] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[7.909827] [drm] Encoders:
[7.909829] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[7.909830] [drm] Connector 1:
[7.909831] [drm] HDMI-A
[7.909833] [drm] HPD1
[7.909835] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[7.909836] [drm] Encoders:
[7.909837] [drm] DFP1: INTERNAL_UNIPHY
[7.909839] [drm] Connector 2:
[7.909840] [drm] DVI-I
[7.909841] [drm] HPD2
[7.909843] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[7.909844] [drm] Encoders:
[7.909846] [drm] DFP2: INTERNAL_UNIPHY
[7.909847] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[7.924142] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b2, caps: 0xb04711/0xa00000/0x0
[7.924275] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[7.924352] iwlagn 0000:03:00.0: irq 33 for MSI/MSI-X
[7.961311] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[8.035562] [drm] fb mappable at 0xD0040000
[8.035564] [drm] vram apper at 0xD0000000
[8.035565] [drm] size 5299200
[8.035566] [drm] fb depth is 24
[8.035568] [drm] pitch is 5888
[8.073121] dib0700: loaded with support for 13 different device-types
[8.073292] dvb-usb: found a 'Yuan PD378S' in cold state, will try to load a firmware
[8.073296] usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fw
[8.074970] dvb-usb: did not find the firmware file. (dvb-usb-dib0700-1.20.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[8.075003] usbcore: registered new interface driver dvb_usb_dib0700
[8.089511] phy0: Selected rate control algorithm 'iwl-agn-rs'
[8.356093] alloc irq_desc for 22 on node -1
[8.356095] alloc kstat_irqs on node -1
[8.356102] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[8.356163] HDA Intel 0000:00:1b.0: setting latency timer to 64
[8.464785] hda_codec: ALC662 rev1: BIOS auto-probing.
[8.466086] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[8.973157] Console: switching to colour frame buffer device 180x56
[8.976621] fb0: radeondrmfb frame buffer device
[8.976622] registered panic notifier
[8.976638] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[8.976701] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[8.976764] HDA Intel 0000:01:00.1: setting latency timer to 64
[9.560748] Adding 3997688k swap on /dev/sdb6. Priority:-1 extents:1 across:3997688k 
[9.740177] EXT3 FS on sdb5, internal journal
[9.882389] loop: module loaded
[10.798331] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[10.833515] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[10.978186] Registered led device: iwl-phy0::radio
[10.978203] Registered led device: iwl-phy0::assoc
[10.978225] Registered led device: iwl-phy0::RX
[10.978240] Registered led device: iwl-phy0::TX
[10.989903] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[278.511830] fuse init (API version 7.13)
[280.150479] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[280.954895] r8169 0000:08:00.0: eth0: link down
[280.954902] r8169 0000:08:00.0: eth0: link down
[280.955403] ADDRCONF(NETDEV_UP): eth0: link is not ready
[282.600306] r8169 0000:08:00.0: eth0: link up
[282.600786] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[284.691768] Bluetooth: L2CAP ver 2.14
[284.691771] Bluetooth: L2CAP socket layer initialized
[284.725936] Bluetooth: RFCOMM TTY layer initialized
[284.725940] Bluetooth: RFCOMM socket layer initialized
[284.725941] Bluetooth: RFCOMM ver 1.11
[284.802411] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[284.802414] Bluetooth: BNEP filters: protocol multicast
[284.840013] Bridge firewalling registered
[284.870237] Bluetooth: SCO (Voice Link) ver 0.6
[284.870239] Bluetooth: SCO socket layer initialized
[285.378580] lp: driver loaded but no devices found
[285.386757] ppdev: user-space parallel port driver
[293.017021] eth0: no IPv6 routers present
`

---

<div class="post-metadata">

**Author:** ![100305](https://www.debian-fr.org/user_avatar/www.debian-fr.org/100305/32/4289_2.png) [@100305](https://www.debian-fr.org/u/100305)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/7 "2016-02-21T11:43:42Z")

</div>

Voici sous gedit le retour de la deuxieme commande:

[code]#

# /etc/default/rcS

# 

# Default settings for the scripts in /etc/rcS.d/

# 

# For information about these variables see the rcS(5) manual page.

# 

# This file belongs to the “initscripts” package.

TMPTIME=0  
SULOGIN=no  
DELAYLOGIN=no  
UTC=no  
VERBOSE=no  
FSCKFIX=no  
RAMRUN=no  
RAMLOCK=no[/code]

---

<div class="post-metadata">

**Author:** ![Tristan.T](https://www.debian-fr.org/letter_avatar_proxy/v4/letter/t/13edae/32.png) [@Tristan.T](https://www.debian-fr.org/u/Tristan.T)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/8 "2016-02-21T11:43:43Z")

</div>

Une amie a eu le même problème

[http://www.debian-fr.org/demarrage-de-debian-lent-t36882.html](http://www.debian-fr.org/demarrage-de-debian-lent-t36882.html)

---

<div class="post-metadata">

**Author:** ![100305](https://www.debian-fr.org/user_avatar/www.debian-fr.org/100305/32/4289_2.png) [@100305](https://www.debian-fr.org/u/100305)\
**Post date:** [Février 21, 2016, 11:43 UTC](https://www.debian-fr.org/t/lancement-inhabituel-long-version-64-bits-squeeze/52897/9 "2016-02-21T11:43:47Z")

</div>

Pour information,

Le Focus apparaît après l’instruction:NFS Common utilities: statd

Le temps est exactement de 5 minutes. (Ce qui peut être assez long lorsque l’on est pressé)

Quelques précisions par rapport à l’existant.  
J’ai configuré le fichier etc/network/interfaces pour paramétrer l’interface WIFI, Wlan0 et suivant les recommandations du Forum.[http://www.debian-fr.org/connexion-sans-fil-impossible-adresse-ip-introuvable-t38251.html](http://www.debian-fr.org/connexion-sans-fil-impossible-adresse-ip-introuvable-t38251.html)

Pour information, ce Post concernait une installation en 32-bits, car depuis et ayant renoncé delors avec le 64-bits, j’ai réalisé que cela pourrait résoudre l’ancien problème de connexion sans fil.  
En effet, mais cela pourrait peut être ainsi aussi produire cela, car 64-bits?

(Si pas clair, procédure 32-bits \<=\> pour installation de 64-bits)
