Problème son Dell xps 14 (9440) / SID

Support Debian
, ,
Tags: #<Tag:0x00007f46a85e7e50> #<Tag:0x00007f46a85e7cc0> #<Tag:0x00007f46a85e7b58>
#9

J’avoue que la sortie de dmesg ne me parle pas franchement … Je la poste quand même au cas ou…
Je mets à partir du moment où ça parle de sof-audio …

[    5.105400] sof-audio-pci-intel-mtl 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.105502] sof-audio-pci-intel-mtl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[    5.105543] sof-audio-pci-intel-mtl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.112460] sof-audio-pci-intel-mtl 0000:00:1f.3: use msi interrupt mode
[    5.114245] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002)
[    5.118054] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.125468] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-p not found, using dummy regulator
[    5.125490] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-d not found, using dummy regulator
[    5.125501] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-a not found, using dummy regulator
[    5.125505] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-io not found, using dummy regulator
[    5.125509] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-cp not found, using dummy regulator
[    5.132450] sof-audio-pci-intel-mtl 0000:00:1f.3: hda codecs found, mask 4
[    5.134668] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware paths/files for ipc type 1:
[    5.134670] sof-audio-pci-intel-mtl 0000:00:1f.3:  Firmware file:     intel/sof-ipc4/mtl/sof-mtl.ri
[    5.134671] sof-audio-pci-intel-mtl 0000:00:1f.3:  Firmware lib path: intel/sof-ipc4-lib/mtl
[    5.134672] sof-audio-pci-intel-mtl 0000:00:1f.3:  Topology file:     intel/sof-ace-tplg/sof-mtl-cs42l43-l0-cs35l56-l23.tplg
[    5.135234] sof-audio-pci-intel-mtl 0000:00:1f.3: Loaded firmware library: ADSPFW, version: 2.10.0.1
[    5.137841] cs35l56 sdw:0:2:01fa:3556:01:2: supply VDD_P not found, using dummy regulator
[    5.137855] cs35l56 sdw:0:2:01fa:3556:01:2: supply VDD_IO not found, using dummy regulator
[    5.137860] cs35l56 sdw:0:2:01fa:3556:01:2: supply VDD_A not found, using dummy regulator
[    5.137979] cs35l56 sdw:0:2:01fa:3556:01:2: Got spk-id from AF01
[    5.138081] cs35l56 sdw:0:2:01fa:3556:01:3: supply VDD_P not found, using dummy regulator
[    5.138096] cs35l56 sdw:0:2:01fa:3556:01:3: supply VDD_IO not found, using dummy regulator
[    5.138099] cs35l56 sdw:0:2:01fa:3556:01:3: supply VDD_A not found, using dummy regulator
[    5.138462] cs35l56 sdw:0:2:01fa:3556:01:3: Got spk-id from AF01
[    5.138512] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.138615] cs35l56 sdw:0:3:01fa:3556:01:0: supply VDD_P not found, using dummy regulator
[    5.138629] cs35l56 sdw:0:3:01fa:3556:01:0: supply VDD_IO not found, using dummy regulator
[    5.138633] cs35l56 sdw:0:3:01fa:3556:01:0: supply VDD_A not found, using dummy regulator
[    5.138763] cs35l56 sdw:0:3:01fa:3556:01:0: Got spk-id from AF01
[    5.138913] cs35l56 sdw:0:3:01fa:3556:01:1: supply VDD_P not found, using dummy regulator
[    5.138922] cs35l56 sdw:0:3:01fa:3556:01:1: supply VDD_IO not found, using dummy regulator
[    5.138927] cs35l56 sdw:0:3:01fa:3556:01:1: supply VDD_A not found, using dummy regulator
[    5.139019] cs35l56 sdw:0:3:01fa:3556:01:1: Got spk-id from AF01
[    5.148233] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.148579] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x441
[    5.149340] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.159540] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    5.246165] EXT4-fs (nvme0n1p9): mounted filesystem 4351e9ca-67cb-4a95-858a-1f6b020b159f r/w with ordered data mode. Quota mode: none.
[    5.256983] sof-audio-pci-intel-mtl 0000:00:1f.3: Booted firmware version: 2.10.0.1
[    5.258317] cs42l43 sdw:0:0:01fa:4243:01: devid: 0x042a43, rev: 0xa1, otp: 0x03
[    5.259302] cs42l43 sdw:0:0:01fa:4243:01: firmware: failed to load cs42l43.bin (-2)
[    5.259313] cs42l43 sdw:0:0:01fa:4243:01: firmware: failed to load cs42l43.bin (-2)
[    5.259314] cs42l43 sdw:0:0:01fa:4243:01: Direct firmware load for cs42l43.bin failed with error -2
[    5.259317] cs42l43 sdw:0:0:01fa:4243:01: Failed to load firmware
[    5.263904] cs35l56 sdw:0:2:01fa:3556:01:3: Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0)
[    5.263996] cs35l56 sdw:0:3:01fa:3556:01:1: Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0)
[    5.280853] cs35l56 sdw:0:3:01fa:3556:01:0: Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0)
[    5.280988] cs35l56 sdw:0:2:01fa:3556:01:2: Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0)
[    5.284260] audit: type=1400 audit(1726858341.970:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=867 comm="apparmor_parser"
[    5.284391] audit: type=1400 audit(1726858341.970:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=868 comm="apparmor_parser"
[    5.284423] audit: type=1400 audit(1726858341.970:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=863 comm="apparmor_parser"
[    5.284559] audit: type=1400 audit(1726858341.970:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=871 comm="apparmor_parser"
[    5.284726] audit: type=1400 audit(1726858341.970:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=864 comm="apparmor_parser"
[    5.284729] audit: type=1400 audit(1726858341.970:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=864 comm="apparmor_parser"
[    5.284863] audit: type=1400 audit(1726858341.970:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=866 comm="apparmor_parser"
[    5.284865] audit: type=1400 audit(1726858341.970:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=866 comm="apparmor_parser"
[    5.284867] audit: type=1400 audit(1726858341.970:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=866 comm="apparmor_parser"
[    5.285663] audit: type=1400 audit(1726858341.970:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=873 comm="apparmor_parser"
[    5.288756] cs35l56 sdw:0:3:01fa:3556:01:1: Slave 1 state check1: UNATTACHED, status was 1
[    5.289036] cs35l56 sdw:0:2:01fa:3556:01:3: Slave 1 state check1: UNATTACHED, status was 1
[    5.289295] cs35l56 sdw:0:3:01fa:3556:01:0: Slave 2 state check1: UNATTACHED, status was 1
[    5.289581] cs35l56 sdw:0:2:01fa:3556:01:2: Slave 2 state check1: UNATTACHED, status was 1
[    5.300738] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2
[    5.305312] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.310182] input: VEN_2C2F:00 2C2F:002B Mouse as /devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-16/i2c-VEN_2C2F:00/0018:2C2F:002B.0001/input/input12
[    5.310243] input: VEN_2C2F:00 2C2F:002B Touchpad as /devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-16/i2c-VEN_2C2F:00/0018:2C2F:002B.0001/input/input13
[    5.310308] hid-generic 0018:2C2F:002B.0001: input,hidraw0: I2C HID v1.00 Mouse [VEN_2C2F:00 2C2F:002B] on i2c-VEN_2C2F:00
[    5.310852] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
[    5.311386] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
[    5.313315] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
[    5.313913] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
[    5.324944] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.327087] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
[    5.327133] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[    5.327150] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    5.327158] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
[    5.327166] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    5.327610] iwlwifi 0000:00:14.3: loaded PNVM version 35148b80
[    5.327689] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.327923] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
[    5.328919] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.331811] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.333036] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.341780] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    5.342309] idma64 idma64.4: Found Intel integrated DMA 64-bit
[    5.342444] dw-apb-uart.4: ttyS0 at MMIO 0x4209004000 (irq = 16, base_baud = 6250000) is a 16550A
[    5.343025] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000
[    5.347840] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.362032] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.373458] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.399212] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.406990] iwlwifi 0000:00:14.3: base HW address: f0:20:ff:e3:e5:f4
[    5.422500] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[    5.579159] input: VEN_2C2F:00 2C2F:002B Mouse as /devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-16/i2c-VEN_2C2F:00/0018:2C2F:002B.0001/input/input15
[    5.579251] input: VEN_2C2F:00 2C2F:002B Touchpad as /devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-16/i2c-VEN_2C2F:00/0018:2C2F:002B.0001/input/input16
[    5.579335] hid-multitouch 0018:2C2F:002B.0001: input,hidraw0: I2C HID v1.00 Mouse [VEN_2C2F:00 2C2F:002B] on i2c-VEN_2C2F:00
[    5.592096] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    6.408397] block nvme0n1: No UUID available providing old NGUID
[    6.441098] NET: Registered PF_QIPCRTR protocol family
[    6.474497] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    6.632092] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
[    6.633232] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[    6.633248] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    6.633255] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
[    6.633255] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
[    6.633264] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    6.714807] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
[    6.790070] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
[    6.948738] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
[    6.949854] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[    6.949864] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
[    6.949870] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    6.949877] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
[    6.949885] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    7.071444] usb 3-6: New USB device found, idVendor=6557, idProduct=2031, bcdDevice= 1.10
[    7.071450] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.071453] usb 3-6: Product: USB DISK 3.0
[    7.071454] usb 3-6: Manufacturer:         
[    7.071456] usb 3-6: SerialNumber: 070D34761117C194
[    7.083060] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    7.198275] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    7.347882] usb 3-7: New USB device found, idVendor=27c6, idProduct=633c, bcdDevice= 1.00
[    7.347888] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.347890] usb 3-7: Product: Goodix Fingerprint USB Device
[    7.347892] usb 3-7: Manufacturer: Goodix Technology Co., Ltd.
[    7.347893] usb 3-7: SerialNumber: UID43A99976_XXXX_MOC_B0
[    7.367523] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    7.478272] usb 3-9: new full-speed USB device number 4 using xhci_hcd
[    7.627519] usb 3-9: New USB device found, idVendor=8086, idProduct=0b63, bcdDevice=22.08
[    7.627525] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.627526] usb 3-9: Product: USB Bridge
[    7.627527] usb 3-9: Manufacturer: MCHP
[    7.657874] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    7.754237] usb 3-10: new full-speed USB device number 5 using xhci_hcd
[    7.916132] usb 3-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00
[    7.916136] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.929790] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    7.943227] SCSI subsystem initialized
[    7.946941] usb-storage 3-6:1.0: USB Mass Storage device detected
[    7.947089] scsi host0: usb-storage 3-6:1.0
[    7.947165] usbcore: registered new interface driver usb-storage
[    7.949679] usbcore: registered new interface driver uas
[    7.950622] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    7.961094] Bluetooth: Core ver 2.22
[    7.961112] NET: Registered PF_BLUETOOTH protocol family
[    7.961113] Bluetooth: HCI device and connection manager initialized
[    7.961116] Bluetooth: HCI socket layer initialized
[    7.961118] Bluetooth: L2CAP socket layer initialized
[    7.961119] Bluetooth: SCO socket layer initialized
[    7.972111] usbcore: registered new interface driver btusb
[    7.973985] Bluetooth: hci0: Device revision is 0
[    7.973992] Bluetooth: hci0: Secure boot is enabled
[    7.973995] Bluetooth: hci0: OTP lock is enabled
[    7.973997] Bluetooth: hci0: API lock is enabled
[    7.973999] Bluetooth: hci0: Debug lock is disabled
[    7.974000] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    7.974004] Bluetooth: hci0: Bootloader timestamp 2022.18 buildtype 1 build 49266
[    7.974067] ACPI Warning: \_SB.PC00.XHCI.RHUB.HS10._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20240322/nsarguments-61)
[    7.975007] Bluetooth: hci0: DSM reset method type: 0x00
[    7.976059] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    7.976605] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    7.976903] Bluetooth: hci0: Found device firmware: intel/ibt-0180-0041.sfi
[    7.976928] Bluetooth: hci0: Boot Address: 0x100800
[    7.976930] Bluetooth: hci0: Firmware Version: 171-18.24
[    8.058454] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.058458] Bluetooth: BNEP filters: protocol multicast
[    8.058462] Bluetooth: BNEP socket layer initialized
[    8.538688] rfkill: input handler disabled
[    8.976514] scsi 0:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[    8.991787] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    9.221045] sd 0:0:0:0: [sda] 121145344 512-byte logical blocks: (62.0 GB/57.8 GiB)
[    9.221859] sd 0:0:0:0: [sda] Write Protect is off
[    9.221861] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
[    9.222451] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    9.226817]  sda: sda1 sda2
[    9.226901] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    9.230143] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    9.447512] Bluetooth: hci0: Waiting for firmware download to complete
[    9.448112] Bluetooth: hci0: Firmware loaded in 1436722 usecs
[    9.448245] Bluetooth: hci0: Waiting for device to boot
[    9.491062] Bluetooth: hci0: Device booted in 41911 usecs
[    9.494298] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0180-0041.ddc
[    9.496111] Bluetooth: hci0: Applying Intel DDC parameters completed
[    9.499085] Bluetooth: hci0: Firmware timestamp 2024.18 buildtype 1 build 3243
[    9.499090] Bluetooth: hci0: Firmware SHA1: 0xa8bb3f39
[    9.503055] Bluetooth: hci0: Fseq status: Success (0x00)
[    9.503064] Bluetooth: hci0: Fseq executed: 00.00.03.94
[    9.503068] Bluetooth: hci0: Fseq BT Top: 00.00.03.94
[    9.597207] Bluetooth: MGMT ver 1.22
[    9.603970] NET: Registered PF_ALG protocol family
[    9.629455] Bluetooth: RFCOMM TTY layer initialized
[    9.629461] Bluetooth: RFCOMM socket layer initialized
[    9.629464] Bluetooth: RFCOMM ver 1.11
[    9.922977] ucsi_acpi USBC000:00: unknown error 0
[    9.922989] ucsi_acpi USBC000:00: UCSI_GET_PDOS failed (-5)
[   10.961273] wlp0s20f3: authenticate with 2c:08:23:ed:76:01 (local address=f0:20:ff:e3:e5:f4)
[   10.961955] wlp0s20f3: send auth to 2c:08:23:ed:76:01 (try 1/3)
[   10.994773] wlp0s20f3: authenticated
[   10.998264] wlp0s20f3: associate with 2c:08:23:ed:76:01 (try 1/3)
[   11.002210] wlp0s20f3: RX AssocResp from 2c:08:23:ed:76:01 (capab=0x1011 status=0 aid=12)
[   11.005284] wlp0s20f3: associated
[   11.066745] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 2c:08:23:ed:76:01
[   13.000644] rfkill: input handler enabled
[   13.807054] input: MX Anywhere 3 Mouse as /devices/virtual/misc/uhid/0005:046D:B025.0004/input/input18
[   13.807754] hid-generic 0005:046D:B025.0004: input,hidraw3: BLUETOOTH HID v0.14 Mouse [MX Anywhere 3] on f0:20:ff:e3:e5:f8
[   13.809082] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[   13.814060] usbcore: registered new interface driver usbhid
[   13.814062] usbhid: USB HID core driver
[   13.942453] input: Logitech MX Anywhere 3 as /devices/virtual/misc/uhid/0005:046D:B025.0004/input/input20
[   13.942614] logitech-hidpp-device 0005:046D:B025.0004: input,hidraw3: BLUETOOTH HID v0.14 Mouse [Logitech MX Anywhere 3] on f0:20:ff:e3:e5:f8
[   13.947901] rfkill: input handler disabled
[   13.966259] logitech-hidpp-device 0005:046D:B025.0004: HID++ 4.5 device connected.
[   14.171558] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   14.400472] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[   23.828275] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[   23.828582] platform sof_sdw: deferred probe pending: sof_sdw: snd_soc_register_card failed -517
[   23.828589] platform INT3472:0c: deferred probe pending: int3472-discrete: Failed to get GPIO
#10

Paquet firmware-cirrus installé ?

#11

Alors je viens de l’installer, mais j’avoue que je ne vois pas trop ce que ça change… En tout cas je n’ai toujours pas de sortie audio !!

C’est bête de ne pas pouvoir faire de diff sur les dmesg …

#12

Au minimum le message d’erreur concernant le firmware manquant ne devrait plus se produire.

1 J'aime
#13 
[    5.045620] sof-audio-pci-intel-mtl 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.045940] sof-audio-pci-intel-mtl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[    5.045999] sof-audio-pci-intel-mtl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.053075] sof-audio-pci-intel-mtl 0000:00:1f.3: use msi interrupt mode
[    5.063856] int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring
[    5.066825] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-p not found, using dummy regulator
[    5.066844] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-d not found, using dummy regulator
[    5.066851] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-a not found, using dummy regulator
[    5.066857] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-io not found, using dummy regulator
[    5.066862] cs42l43 sdw:0:0:01fa:4243:01: supply vdd-cp not found, using dummy regulator
[    5.076513] sof-audio-pci-intel-mtl 0000:00:1f.3: hda codecs found, mask 4
[    5.079072] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware paths/files for ipc type 1:
[    5.079074] sof-audio-pci-intel-mtl 0000:00:1f.3:  Firmware file:     intel/sof-ipc4/mtl/sof-mtl.ri
[    5.079075] sof-audio-pci-intel-mtl 0000:00:1f.3:  Firmware lib path: intel/sof-ipc4-lib/mtl
[    5.079076] sof-audio-pci-intel-mtl 0000:00:1f.3:  Topology file:     intel/sof-ace-tplg/sof-mtl-cs42l43-l0-cs35l56-l23.tplg
[    5.079625] sof-audio-pci-intel-mtl 0000:00:1f.3: Loaded firmware library: ADSPFW, version: 2.10.0.1

J’ai l’impression qu’il arrive à charger des trucs… mais ça ne marche toujours pas!!!

#14

C’est tout ? Dans l’extrait précédent il y avait beaucoup plus de messages avant l’échec de chargement du firmware.

#15

Je n’ai pas mis l’intégralité de mon dmesg :wink:

#16

C’est mieux de tout mettre, tu peux louper un truc.
Si c’est trop gros, tu peux utiliser https://pastebin.com/.

Par exemple , tu fais un
sudo journalctl -k > journal.txt
et tu copies le contenu du fichier sur pastebin, comme ça on aura tout.

#17

Bonjour,
Peut-être un problème avec PipeWire ?
WirePlumber est-il installé ?
Solutionnerait-il le problème ?

« providing convenience for writing the daemon’s modules »
https://packages.debian.org/sid/wireplumber

#18

@yrbane
On a déjà vu sur ce forum des problèmes de son traîner pendant plus d’un mois, bricolés approximativement de doc en doc, de forum en forum, sans atteindre un état stable, même pour du Debian ‹ stable ›.
Avant de compliquer la situation et de modifier un peu tout sans traçabilité, je propose de commencer par faire une photo de l’état du système.

Important:
→ S’agit-il d’une SID installée ‹ neuve ›, ou d’une mise à jour de versions Debian successives ?

Dans un premier temps, si pas déjà installés, peux-tu installer les firmwares suivant du dépôt ‹ non-free-firmware ›:
firmware-intel-sound firmware-sof-signed

et rebooter, pour voir. Si pas de changement, retour de:

dpkg -l |awk '$2~"pipew|pulse|alsa|wirep|intel|-sof" && $1~/^i/ {print $1,$2}'

et

systemctl --user list-unit-files --state=enabled --no-pager |awk '/pipe|wirep|pulse/'

!! Il y a quelques points délicats, et non intuitifs.

#19

Embêtant : tu as installé des trucs qui vont peut être empêcher un fonctionnement normal .

#20

@pled Voici mon journal de démarrage : sept. 23 17:25:04 since kernel: Linux version 6.10.9-amd64 (debian-kernel@lists. - Pastebin.com

@bub J’ai wireplumber, mais je ne vois trop à quoi ça sert ?

@Verner je crois que j’ai installé une « testing » que j’ai directement mis à jour à sid…

~$ dpkg -l |awk '$2~"pipew|pulse|alsa|wirep|intel|-sof" && $1~/^i/ {print $1,$2}'
ii alsa-topology-conf
ii alsa-ucm-conf
ii alsa-utils
ii firmware-intel-graphics
ii firmware-intel-misc
ii firmware-intel-sound
ii firmware-sof-signed
ii gnome-software
ii gnome-software-common
ii gnome-software-plugin-deb
ii gnome-software-plugin-fwupd
ii gstreamer1.0-pipewire:amd64
ii intel-media-va-driver:amd64
ii intel-microcode
ii libcanberra-pulse:amd64
ii libdrm-intel1:amd64
ii libpipewire-0.3-0t64:amd64
ii libpipewire-0.3-common
ii libpipewire-0.3-modules:amd64
ii libpulse-mainloop-glib0:amd64
ii libpulse0:amd64
ii libwireplumber-0.5-0:amd64
ii pipewire:amd64
ii pipewire-alsa:amd64
ii pipewire-audio
ii pipewire-bin
ii pipewire-pulse
ii python3-software-properties
ii wireplumber
ii xserver-xorg-video-intel

~$ systemctl --user list-unit-files --state=enabled --no-pager |awk '/pipe|wirep|pulse/'
pipewire-pulse.service                       enabled enabled
pipewire.service                             enabled enabled
wireplumber.service                          enabled enabled
pipewire-pulse.socket                        enabled enabled
pipewire.socket                              enabled enabled
#22

Pas un problème à priori, encore qu’ il faudrait vérifier plus précisément. Ma question était plus à partir de versions successives plus anciennes de Debian.
Le problème serait plus que je ne sais pas ce que tu as déjà éventuellement déjà tripatouillé.

failed to load cirrus/cs35l56-b0-dsp1-misc-10280c6b-spkid1-amp3.wmfw (-2)
firmware: failed to load cirrus/cs35l56-b0-dsp1-misc-10280c6b-spkid1-amp3.wmfw (-2)
failed to load cirrus/cs35l56-b0-dsp1-misc-10280c6b-spkid1-amp4.wmfw (-2)
failed to load cirrus/cs35l56-b0-dsp1-misc-10280c6b-spkid1-amp4.wmfw (-2)

Ça va être plus compliqué et sensible qu’espéré, mais SID is SID !
Le problème est très probablement un souci de synchronicité entre versions exactes du noyau et paquets firmware-sof-signed et alsa-ucm-conf.

Il va falloir passer en mode bidouille SID. Sinon à part attendre, je ne vois pas.
Le plus simple à tenter est ceci:

curl -L -o alsa-ucm-conf.tar.gz https://github.com/alsa-project/alsa-ucm-conf/archive/refs/heads/master.tar.gz
# tar xvzf alsa-ucm-conf.tar.gz -C /usr/share/alsa --strip-components=1 --wildcards "*/ucm" "*/ucm2"

Rebooter, et si toujours pas:

systemctl stop alsa-state
rm /var/lib/alsa/asound.state
systemctl start alsa-state

Et se reloguer.

A toi de voir…
Sinon peut-être des choses à blacklister, config noyau alsa à ajuster etc…
En résumé, je m’attendais à du plus simple.

1 J'aime
#23

Gros bisou virtuel… J’ai enfin du son!!! Merci à tous :star_struck:

#24

Je remet mon journal de démarrage car il y a encore des problèmes à résoudre… notamment la webcam qui ne marche pas (même si je ne suis pas un grand adepte de la visio…)

#25

Son OK. Now Webcam.

Je note que tu as changé de noyau: 6.10.9 → 6.10.11
Ce n’est pas un détail, mais essentiel à informer.

Ton BIOS est-il à jour ? → sudo dmidecode |grep Date

Peux-tu confirmer le modèle exact de ta webcam avec lspci (pour éviter de perdre du temps).

Tu peux tenter pour essai de rajouter l’option noyau ‹ i915.enable_psr=0 ›, soit directement au boot dans l’interface de grub, si tu comprends ce que je veux dire, ou "GRUB_CMDLINE_LINUX_DEFAULT="quiet i915.enable_psr=0" dans /etc/default/grub, puis rafraichir le grub.
→ splash à retirer temporairement pour mieux voir ce qui se passe au boot.

En première analyse rapide, mes impressions sont que ça va être compliqué, car on tombe dans la problématique de softs propriétaires (différence Dell ubuntu/Debian sur ce problème). Pas sûr qu’il existe une solution simple Debian.
Afin de ne pas créer de confusion inutile dans ce fil, je propose de concentrer celui-ci sur le son en renommant le titre 'Problème son Dell xps 14 (9440) / SID ’ et d’en ouvrir un autre 'Problème webcam Dell xps 14 (9440) / SID ’

1 J'aime
#26

@Verner je te remercie vraiment pour le temps que tu as pris pour résoudre ce problème de son… Et je vais suivre ton bon conseil en renommant ce fil et en en créant un nouveau. Merci également à tout ceux qui ont pris du temps pour m’aider.

#27

Oui, c’est bien de créer un nouveau fil pour ta webcam.

Merci aussi de préciser ce qui a résolu le problème de son : nouveau noyau ? installation de alsa-usm-conf ? effacer asound.state ? ou la combinaison des trois ? Ça peut aider d’autres personnes…

#29

Pour éviter que ce sujet relatif à SID soit relancé dans un mois ou un an, il est préférable de le marquer [résolu], SID évoluant rapidement, et un moins plus tard, un problème son sera différent.

Le point clef était l’ajout de firmware-sof-signed, dont l’installation exécute ceci:

dpkg-maintscript-helper dir_to_symlink /usr/lib/firmware/intel/sof-ace-tplg sof-ipc4-tplg 2024.06-1\~ -- "$@"

… qui rend moins évidente la traçabilité entre contenu du paquet et firmware sof-intel réclamé, entre autre

Firmware file:     intel/sof-ipc4/mtl/sof-mtl.ri
Firmware lib path: intel/sof-ipc4-lib/mtl
Topology file:     intel/sof-ace-tplg/sof-mtl-cs42l43-l0-cs35l56-l23.tplg

Concernant alsa-ucm-conf, je ne pense pas que la mise à jour directe à partir de git était nécessaire, étant donnée la date du paquet SID (01 Jul 2024), mais tant qu’à faire.
La mise à jour noyau n’a à mon avis eu pour conséquence utile pour ce problème son de fournir intel-sof à l’initramfs.

Il ne fallait donc pas grand-chose pour une SID, et ça aurait était plus compliqué pour une stable.

@yrbane ouvrira un sujet webcam s’il le juge utile, qui sera probablement plus compliqué, en première analyse.

1 J'aime
#30

Désolé, pour ma pitoyable réactivité, mon emplois du temps ne m’a pas laissé le loisir de rebooter sur debian, qui cohabite avec un partition ubuntu sur laquelle je travaille.

J’ai mis [résolu] dans le titre du sujet, je ne sais pas si c’est comme ça qu’il faut faire.

Vais sûrement ouvrir, dans un avenir proche, un sujet pour la camera. Enfin le problème de son m’embêtait un peu plus!!! Je ne suis pas adepte de la visio :wink:

Je vous remercie tous, vous qui avez pris du temps à m’aider :heart: