Transferts sur clé USB3 via port USB3 qui plantent

Bonjour à toutes et à tous.

Je suis sous Debian Wheezy 64 :
Linux debian7 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux

J’ai un problème avec les transferts de données sur une clé USB3 via les ports USB3 de ma machine (un en façade et un à l’arrière du PC) :
Ma clé est reconnue et montée automatiquement lorsque je la branche (une Silicon Power Marvel M01 16 Go USB 3.0), mais lorsque j’essaie de transférer en USB3 (un film par ex.), le transfert de données débute normalement avec un taux de transfert correct (~ 50 Mo/s), mais quelques secondes après le transfert échoue, et la clé devient alors inutilisable avec obligation de la reformater pour pouvoir la réutiliser par la suite.
Ce message contextuel s’affiche: “Erreur lors de l’opération de « splicing » sur le fichier : Erreur d’entrée/sortie”.
J’ajoute plus bas ce que la commande “dmesg” indique lors du branchement de la clé, puis lors de l’erreur de transfert.

À noter qu’il n’y a aucun souci de ce genre quand j’utilise cette clé USB3 depuis un de mes ports USB2, les transferts arrivent à s’effectuer.

Merci d’avance à ceux qui pourront m’aider, j’ai beau avoir cherché sur le net, quelques posts parlent de ce problème, mais j’ai pas vu de solution.

* lspci :

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) 00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4) 00:1f.0 ISA bridge: Intel Corporation B75 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 02:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 04:02.0 Network controller: Atheros Communications Inc. AR9227 Wireless Network Adapter (rev 01)

* lsusb :

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58) Bus 001 Device 004: ID 04f3:0103 Elan Microelectronics Corp.

* Connexion clé USB3 / port USB3 (dmesg) :

[ 4840.570877] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd [ 4840.587654] usb 4-4: New USB device found, idVendor=1f75, idProduct=0916 [ 4840.587659] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4840.587662] usb 4-4: Product: Silicon-Power16G [ 4840.587664] usb 4-4: Manufacturer: UFD 3.0 [ 4840.587667] usb 4-4: SerialNumber: 130102660580000348 [ 4840.608689] Initializing USB Mass Storage driver... [ 4840.610016] scsi8 : usb-storage 4-4:1.0 [ 4840.610114] usbcore: registered new interface driver usb-storage [ 4840.610116] USB Mass Storage support registered. [ 4841.604568] scsi 8:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 [ 4841.605426] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 4841.606235] sd 8:0:0:0: [sdc] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 4841.606350] sd 8:0:0:0: [sdc] Write Protect is off [ 4841.606353] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 4841.606469] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 4841.608487] sdc: sdc1 [ 4841.615697] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 4841.910422] fuse init (API version 7.17)

* Erreur transfert USB3 (dmesg) :

usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5296.573202] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5296.573206] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5296.696826] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5296.712865] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5296.712868] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5296.840461] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5296.856476] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5296.856479] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5296.988077] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5297.004097] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5297.004101] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5297.155728] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5297.171667] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5297.171670] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5297.299283] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5297.315300] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5297.315303] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5297.442916] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5297.458934] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5297.458937] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5297.606494] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5297.622513] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5297.622517] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5297.917697] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5297.933713] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5297.933716] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5299.122600] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5299.138618] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5299.138622] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5299.298152] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5299.314176] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5299.314180] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5300.120044] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5300.136057] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5300.136060] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5300.355472] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5300.371648] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5300.371651] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5300.499074] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5300.515099] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5300.515102] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5300.658662] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5300.674691] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5300.674695] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5300.810276] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5300.826295] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5300.826299] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5300.970306] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5300.985881] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5300.985885] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5301.113493] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5301.129511] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5301.129514] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5301.265114] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5301.281136] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5301.281140] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5302.386246] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5302.402326] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5302.402329] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5302.641581] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5302.657619] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5302.657622] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5302.888945] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5302.904967] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5302.904970] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5303.698887] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5303.714909] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5303.714912] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5303.858465] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5303.874566] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5303.874569] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5304.046007] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5304.062895] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5304.062899] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5304.197633] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5304.213698] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5304.213701] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5304.361171] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5304.377318] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5304.377321] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5304.508799] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5304.524808] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5304.524811] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5304.648477] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5304.664492] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5304.664495] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5304.967688] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5304.983646] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5304.983649] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5305.869481] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5305.885337] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5305.885343] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5306.994432] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5307.010451] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5307.010457] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5307.150056] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5307.166206] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5307.166212] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5307.313684] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5307.329631] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5307.329636] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5307.453283] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5307.469538] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5307.469543] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5307.604917] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5307.620971] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5307.620976] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5307.788425] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5307.804410] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5307.804416] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5307.932044] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5307.948160] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5307.948166] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5308.095778] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5308.111705] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5308.111709] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5308.358906] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5308.374928] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5308.374930] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5309.639622] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5309.655774] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5309.655777] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5309.855121] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5309.871121] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5309.871124] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5310.665067] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5310.681016] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5310.681019] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5310.960246] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5310.976353] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5310.976357] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5311.782140] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5311.798145] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5311.798148] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5311.953723] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5311.969707] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5311.969710] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5312.105327] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5312.121379] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5312.121382] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5312.260913] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5312.276950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5312.276953] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5312.484421] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5312.500398] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5312.500401] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5312.779583] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5312.795635] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5312.795638] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5313.653404] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5313.669428] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5313.669431] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5313.804942] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5313.821133] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5313.821136] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5313.952613] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5313.968714] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5313.968717] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5314.096200] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5314.112315] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5314.112318] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5314.243877] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5314.259839] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5314.259842] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5314.403405] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5314.419470] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5314.419474] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5314.543069] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5314.559058] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5314.559062] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5314.690664] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5314.706714] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5314.706717] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5314.834337] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5314.850429] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5314.850432] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5315.137568] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5315.153550] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5315.153553] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5316.342449] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5316.358522] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5316.358526] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5317.148401] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5317.164498] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5317.164501] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5317.315959] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5317.331963] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5317.331966] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5317.499535] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5317.515551] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5317.515554] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5317.655113] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5317.671087] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5317.671090] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5317.806693] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5317.822691] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5317.822695] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5317.958288] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5317.974302] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5317.974305] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5318.105936] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5318.121995] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5318.121998] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5318.253596] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5318.269568] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5318.269571] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5318.409202] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5318.425264] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5318.425267] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5318.628559] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5318.644686] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5318.644689] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5319.650087] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5319.665994] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5319.665998] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5319.793624] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5319.809613] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5319.809617] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5319.941199] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5319.957228] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5319.957231] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5321.062343] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5321.078391] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5321.078395] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5321.205989] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5321.222404] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5321.222407] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5321.369555] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5321.385575] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5321.385579] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5321.509216] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5321.525302] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5321.525305] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5321.656820] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5321.672891] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5321.672894] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5321.820386] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5321.836497] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5321.836500] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5322.139578] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5322.155672] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5322.155675] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5322.359067] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5322.375018] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5322.375021] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5322.578465] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5322.594447] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5322.594450] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5323.388360] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5323.404491] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5323.404494] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5323.547972] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5323.564046] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5323.564050] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5323.691588] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5323.707591] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5323.707594] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5323.847190] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5323.863300] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5323.863303] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5324.002778] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5324.018815] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5324.018818] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5324.298023] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5324.314043] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5324.314047] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5324.577307] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5324.593363] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5324.593366] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5325.395250] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5325.411225] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5325.411228] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5325.538897] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5325.554857] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5325.554860] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5325.698462] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5325.714522] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5325.714525] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5325.846079] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5325.862076] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5325.862079] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5326.005854] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5326.021775] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5326.021778] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5327.130828] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5327.146788] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5327.146794] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5327.282426] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5327.298548] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5327.298554] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5327.465961] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5327.482063] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5327.482069] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5327.621524] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5327.637640] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5327.637643] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5327.845034] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5327.861067] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5327.861073] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5328.152189] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5328.168153] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5328.168156] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5329.029925] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5329.045970] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5329.045975] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5329.185506] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5329.201600] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5329.201605] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5329.337189] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5329.353308] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5329.353314] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5329.488784] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5329.504935] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5329.504941] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5329.744081] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5329.760232] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5329.760238] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5330.051309] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5330.067372] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5330.067377] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5330.861181] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5330.877230] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5330.877234] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5331.028771] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5331.044787] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5331.044791] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5332.181815] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5332.197876] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5332.197881] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5332.345373] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5332.361394] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5332.361398] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5332.497695] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5332.513016] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5332.513019] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5332.640635] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5332.656684] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5332.656687] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5332.808200] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5332.824207] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5332.824210] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5332.983741] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5332.999781] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5332.999784] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5333.131403] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5333.147394] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5333.147397] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5333.271049] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5333.287115] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5333.287118] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5333.418647] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5333.434671] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5333.434674] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5333.642051] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5333.658081] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5333.658085] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5334.029089] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5334.045074] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5334.045077] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5335.952122] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5335.968155] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5335.968159] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5336.227423] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5336.243550] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5336.243554] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5337.053295] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5337.069339] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5337.069342] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5337.192951] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5337.208955] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5337.208959] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5337.336580] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5337.352589] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5337.352592] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5337.556069] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5337.572034] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5337.572038] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5337.707614] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5337.723635] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5337.723638] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5337.847256] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5337.863274] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5337.863277] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5338.106642] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5338.122621] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5338.122624] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5338.948442] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5338.964510] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5338.964513] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5340.081532] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5340.097554] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5340.097557] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5340.237133] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5340.253216] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5340.253220] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5340.396756] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5340.412739] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5340.412743] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5340.536364] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5340.552379] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5340.552382] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5340.684000] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5340.700011] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5340.700014] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5340.827673] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5340.843734] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5340.843738] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5340.967328] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5340.983334] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5340.983337] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5341.114880] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5341.130893] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5341.130896] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5341.410118] usb 4-4: reset SuperSpeed USB device number 2 using xhci_hcd [ 5341.426253] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e80 [ 5341.426256] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880205710e40 [ 5341.429695] usb 4-4: can't restore configuration #1 (error=-71) [ 5341.429746] usb 4-4: USB disconnect, device number 2 [ 5341.433907] sd 8:0:0:0: [sdc] Unhandled error code [ 5341.433910] sd 8:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 5341.433913] sd 8:0:0:0: [sdc] CDB: Write(10): 2a 00 00 3c 5a 70 00 00 f0 00 [ 5341.433918] end_request: I/O error, dev sdc, sector 3955312 [ 5341.433922] Buffer I/O error on device sdc1, logical block 494158 [ 5341.433923] lost page write due to I/O error on sdc1 [ 5341.433927] Buffer I/O error on device sdc1, logical block 494159 [ 5341.433928] lost page write due to I/O error on sdc1 [ 5341.433930] Buffer I/O error on device sdc1, logical block 494160 [ 5341.433931] lost page write due to I/O error on sdc1 [ 5341.433933] Buffer I/O error on device sdc1, logical block 494161 [ 5341.433934] lost page write due to I/O error on sdc1 [ 5341.433936] Buffer I/O error on device sdc1, logical block 494162 [ 5341.433937] lost page write due to I/O error on sdc1 [ 5341.433940] Buffer I/O error on device sdc1, logical block 494163 [ 5341.433941] lost page write due to I/O error on sdc1 [ 5341.433943] Buffer I/O error on device sdc1, logical block 494164 [ 5341.433944] lost page write due to I/O error on sdc1 [ 5341.433946] Buffer I/O error on device sdc1, logical block 494165 [ 5341.433947] lost page write due to I/O error on sdc1 [ 5341.433949] Buffer I/O error on device sdc1, logical block 494166 [ 5341.433950] lost page write due to I/O error on sdc1 [ 5341.433953] Buffer I/O error on device sdc1, logical block 494167 [ 5341.433954] lost page write due to I/O error on sdc1 [ 5341.435793] sd 8:0:0:0: [sdc] Unhandled error code [ 5341.435795] sd 8:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 5341.435797] sd 8:0:0:0: [sdc] CDB: Write(10): 2a 00 00 3c 5b 60 00 00 f0 00 [ 5341.435802] end_request: I/O error, dev sdc, sector 3955552

Salut,

Sauf erreur ou lunette encraoudé, je n’ai lu ou vu une référence au system de fichier utiliser pour cette clé.

Salut,

Effectivement oubli de ma part.
J’ai essayé en FAT32 et en NTFS. Dans les 2 cas le problème reste le même.

ext2/ext3/ext4 … ?

Cela devrait, éventuellement, éliminer quelques incertitudes.

* edit *

Quel outils utilises-tu pour formater partitionner ?

* edit_1 *

Compatibilité matériel, pilote, controleur USB ?

kmuto.jp/debian/hcl/

Ma debian est en ext4.
Ma clé est en NTFS pour le moment, pour pouvoir la brancher aussi bien sur Debian que Windows ainsi ma Freebox, et pour pouvoir y placer des fichiers dont la taille est supérieure à 4 Go.

Pour formater j’utilise GParted.

J’ai pas bien compris ce que tu demandes en rapport avec le site Kmuto, peux-tu détailler s’il te plait ?

Merci.

  • Vérifié la compatibilité, …

En console root, lances :

Copier/coller en lieu et place, Enter

Voilà ce que ça me liste :

PCI ID Works? Fabricant Device Pilote Noyau 80860150 Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller 80860152 Oui Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller i915 v3.0.0- 80861e31 Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller 80861e3a Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 80861e2d Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 80861e20 Oui Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller snd-hda-intel v3.0.0- 80861e10 Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 80861e18 Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 80861e1a Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 80861e26 Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 8086244e Oui Intel Corporation 82801 PCI Bridge i810_rng 80861e49 Oui Intel Corporation B75 Express Chipset LPC Controller iTCO_wdt v2.6.39- 80861e02 Oui Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] ahci v2.6.39- 80861e22 Oui Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller i2c-i801 v3.0.0- 1b210612 Oui ASMedia Technology Inc. ASM1062 Serial ATA Controller ahci v3.2.17- 10ec8168 Oui Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller r8169 v2.6.25- 168c002d Oui Atheros Communications Inc. AR9227 Wireless Network Adapter ath9k v2.6.32-

Plusieurs pistes à explorer et creuser.

  • Présence du paquet ntfs-3g

  • Problème matériels > vieillissement “prématurée” de la dite clé.

  • Fat32 partiton max = 4 Gio pour info

  • Copier autre chose que " (un film par ex.) " > une .iso par exemple ou autres ? > suffisamment conséquent.

  • Vider la clé en un autre lieu. Formater en ext3 ou ext4 > Transfert

  • Surveiller les logs en live à l’introduction et transfert: tail -f /var/log/<le_fichier>

  • J’ai bien le paquet ntfs-3g qui est installé.

  • J’ai acheté cette clé USB 3 chez LDLC il y a quelques mois, elle semble être récente mais j’ai pas de détails plus précis.

  • La clé était livrée formatée en FAT32, depuis je l’ai mise en NTFS.

  • J’ai essayé de transférer un autre type de fichier (une .iso), le transfert plante.

  • Tentative de transfert après avoir formaté la clé en ext4, échec du transfert également.

Pour les logs je vais voir ça demain.

Merci.

Je mets en copie les différents logs lors du plantage d’un transfert, dans la plupart des logs il y a un message qui explique que la capacité de la clé est passée de 15 Go à 0 Go. Il y a également toujours ce même message qui apparaît : “xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep”.

À noter dans les logs qu’à 9h55 je débranche la clé après l’avoir reformatée en NTFS (depuis un port USB2) pour la rebrancher ensuite sur un port USB3 et tenter un transfert de fichier (une .iso):

* /var/log/dmesg :

[ 5.061253] Bluetooth: L2CAP socket layer initialized [ 5.061256] Bluetooth: SCO socket layer initialized [ 5.068253] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.068256] Bluetooth: BNEP filters: protocol multicast [ 5.074799] Bluetooth: RFCOMM TTY layer initialized [ 5.074803] Bluetooth: RFCOMM socket layer initialized [ 5.074804] Bluetooth: RFCOMM ver 1.11 [ 5.100596] lp0: using parport0 (interrupt-driven). [ 5.104611] ppdev: user-space parallel port driver [ 5.132094] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory

* /var/log/kern.log :

Aug 30 09:46:47 debian7 kernel: [ 760.136059] usb 3-4: SerialNumber: 130102660580000348 Aug 30 09:46:47 debian7 kernel: [ 760.136451] scsi9 : usb-storage 3-4:1.0 Aug 30 09:46:48 debian7 kernel: [ 761.133274] scsi 9:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 Aug 30 09:46:48 debian7 kernel: [ 761.134282] sd 9:0:0:0: Attached scsi generic sg3 type 0 Aug 30 09:46:48 debian7 kernel: [ 761.135084] sd 9:0:0:0: [sdc] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) Aug 30 09:46:48 debian7 kernel: [ 761.135218] sd 9:0:0:0: [sdc] Write Protect is off Aug 30 09:46:48 debian7 kernel: [ 761.135222] sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00 Aug 30 09:46:48 debian7 kernel: [ 761.135339] sd 9:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA Aug 30 09:46:48 debian7 kernel: [ 761.136961] sdc: sdc1 Aug 30 09:46:48 debian7 kernel: [ 761.138125] sd 9:0:0:0: [sdc] Attached SCSI removable disk Aug 30 09:55:05 debian7 kernel: [ 1256.436451] sdc: detected capacity change from 15518924800 to 0 Aug 30 09:55:09 debian7 kernel: [ 1260.304353] usb 3-4: USB disconnect, device number 2 Aug 30 09:55:17 debian7 kernel: [ 1268.547242] usb 3-4: new SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:17 debian7 kernel: [ 1268.563672] usb 3-4: New USB device found, idVendor=1f75, idProduct=0916 Aug 30 09:55:17 debian7 kernel: [ 1268.563677] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 09:55:17 debian7 kernel: [ 1268.563680] usb 3-4: Product: Silicon-Power16G Aug 30 09:55:17 debian7 kernel: [ 1268.563683] usb 3-4: Manufacturer: UFD 3.0 Aug 30 09:55:17 debian7 kernel: [ 1268.563685] usb 3-4: SerialNumber: 130102660580000348 Aug 30 09:55:17 debian7 kernel: [ 1268.564069] scsi10 : usb-storage 3-4:1.0 Aug 30 09:55:18 debian7 kernel: [ 1269.560869] scsi 10:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 Aug 30 09:55:18 debian7 kernel: [ 1269.561908] sd 10:0:0:0: Attached scsi generic sg3 type 0 Aug 30 09:55:18 debian7 kernel: [ 1269.562621] sd 10:0:0:0: [sdc] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) Aug 30 09:55:18 debian7 kernel: [ 1269.562754] sd 10:0:0:0: [sdc] Write Protect is off Aug 30 09:55:18 debian7 kernel: [ 1269.562758] sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00 Aug 30 09:55:18 debian7 kernel: [ 1269.562868] sd 10:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA Aug 30 09:55:18 debian7 kernel: [ 1269.564136] sdc: sdc1 Aug 30 09:55:18 debian7 kernel: [ 1269.566393] sd 10:0:0:0: [sdc] Attached SCSI removable disk Aug 30 09:55:51 debian7 kernel: [ 1302.216994] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.233150] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.233156] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.356678] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.372891] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.372895] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.496321] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.512390] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.512395] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.635953] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.652102] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.652107] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.811425] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1302.827449] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1302.827452] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1302.951083] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1302.967189] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1302.967203] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.106676] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.122685] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.122688] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.262290] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.279234] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.279239] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.397944] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.413949] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.413954] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.633339] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.649353] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.649388] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:53 debian7 kernel: [ 1303.968489] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:53 debian7 kernel: [ 1303.984499] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:53 debian7 kernel: [ 1303.984504] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:54 debian7 kernel: [ 1305.117522] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:54 debian7 kernel: [ 1305.133528] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:54 debian7 kernel: [ 1305.133532] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1305.915474] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1305.931526] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1305.931533] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1306.059113] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.075129] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1306.075135] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1306.198774] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.225084] usb 3-4: device descriptor read/8, error -71 Aug 30 09:55:55 debian7 kernel: [ 1306.326252] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.352496] usb 3-4: device descriptor read/8, error -71 Aug 30 09:55:55 debian7 kernel: [ 1306.541715] usb 3-4: USB disconnect, device number 3 Aug 30 09:55:55 debian7 kernel: [ 1306.549679] sd 10:0:0:0: [sdc] Unhandled error code Aug 30 09:55:55 debian7 kernel: [ 1306.549683] sd 10:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Aug 30 09:55:55 debian7 kernel: [ 1306.549696] sd 10:0:0:0: [sdc] CDB: Write(10): 2a 00 00 3a 0b d0 00 00 f0 00 Aug 30 09:55:55 debian7 kernel: [ 1306.549703] end_request: I/O error, dev sdc, sector 3804112 Aug 30 09:55:55 debian7 kernel: [ 1306.549707] Buffer I/O error on device sdc1, logical block 475258 Aug 30 09:55:55 debian7 kernel: [ 1306.549709] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549712] Buffer I/O error on device sdc1, logical block 475259 Aug 30 09:55:55 debian7 kernel: [ 1306.549714] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549716] Buffer I/O error on device sdc1, logical block 475260 Aug 30 09:55:55 debian7 kernel: [ 1306.549718] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549720] Buffer I/O error on device sdc1, logical block 475261 Aug 30 09:55:55 debian7 kernel: [ 1306.549722] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549724] Buffer I/O error on device sdc1, logical block 475262 Aug 30 09:55:55 debian7 kernel: [ 1306.549726] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549728] Buffer I/O error on device sdc1, logical block 475263 Aug 30 09:55:55 debian7 kernel: [ 1306.549730] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549732] Buffer I/O error on device sdc1, logical block 475264 Aug 30 09:55:55 debian7 kernel: [ 1306.549734] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549736] Buffer I/O error on device sdc1, logical block 475265 Aug 30 09:55:55 debian7 kernel: [ 1306.549738] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549740] Buffer I/O error on device sdc1, logical block 475266 Aug 30 09:55:55 debian7 kernel: [ 1306.549742] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549744] Buffer I/O error on device sdc1, logical block 475267 Aug 30 09:55:55 debian7 kernel: [ 1306.549746] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.551902] sd 10:0:0:0: [sdc] Unhandled error code Aug 30 09:55:55 debian7 kernel: [ 1306.551904] sd 10:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Aug 30 09:55:55 debian7 kernel: [ 1306.551907] sd 10:0:0:0: [sdc] CDB: Write(10): 2a 00 00 3a 0c c0 00 00 f0 00 Aug 30 09:55:55 debian7 kernel: [ 1306.551914] end_request: I/O error, dev sdc, sector 3804352 Aug 30 09:55:55 debian7 kernel: [ 1306.718708] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1306.718712] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:56 debian7 kernel: [ 1306.956666] usb 3-4: new SuperSpeed USB device number 4 using xhci_hcd Aug 30 09:55:56 debian7 kernel: [ 1306.972977] usb 3-4: New USB device found, idVendor=1f75, idProduct=0916 Aug 30 09:55:56 debian7 kernel: [ 1306.972981] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 09:55:56 debian7 kernel: [ 1306.972992] usb 3-4: Product: Silicon-Power16G Aug 30 09:55:56 debian7 kernel: [ 1306.972994] usb 3-4: Manufacturer: UFD 3.0 Aug 30 09:55:56 debian7 kernel: [ 1306.972996] usb 3-4: SerialNumber: 130102660580000348 Aug 30 09:55:56 debian7 kernel: [ 1306.973334] scsi11 : usb-storage 3-4:1.0 Aug 30 09:55:57 debian7 kernel: [ 1307.970268] scsi 11:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 Aug 30 09:55:57 debian7 kernel: [ 1307.971187] sd 11:0:0:0: Attached scsi generic sg3 type 0 Aug 30 09:55:57 debian7 kernel: [ 1307.971963] sd 11:0:0:0: [sdd] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) Aug 30 09:55:57 debian7 kernel: [ 1307.972077] sd 11:0:0:0: [sdd] Write Protect is off Aug 30 09:55:57 debian7 kernel: [ 1307.972081] sd 11:0:0:0: [sdd] Mode Sense: 23 00 00 00 Aug 30 09:55:57 debian7 kernel: [ 1307.972196] sd 11:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA Aug 30 09:55:57 debian7 kernel: [ 1307.973465] sdd: sdd1 Aug 30 09:55:57 debian7 kernel: [ 1307.974203] sd 11:0:0:0: [sdd] Attached SCSI removable disk

* /var/log/messages :

Aug 30 09:46:47 debian7 kernel: [ 760.136451] scsi9 : usb-storage 3-4:1.0 Aug 30 09:46:47 debian7 mtp-probe: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4" Aug 30 09:46:47 debian7 mtp-probe: bus: 3, device: 2 was not an MTP device Aug 30 09:46:48 debian7 kernel: [ 761.133274] scsi 9:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 Aug 30 09:46:48 debian7 kernel: [ 761.134282] sd 9:0:0:0: Attached scsi generic sg3 type 0 Aug 30 09:46:48 debian7 kernel: [ 761.135084] sd 9:0:0:0: [sdc] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) Aug 30 09:46:48 debian7 kernel: [ 761.135218] sd 9:0:0:0: [sdc] Write Protect is off Aug 30 09:46:48 debian7 kernel: [ 761.135339] sd 9:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA Aug 30 09:46:48 debian7 kernel: [ 761.136961] sdc: sdc1 Aug 30 09:46:48 debian7 kernel: [ 761.138125] sd 9:0:0:0: [sdc] Attached SCSI removable disk Aug 30 09:55:05 debian7 kernel: [ 1256.436451] sdc: detected capacity change from 15518924800 to 0 Aug 30 09:55:09 debian7 kernel: [ 1260.304353] usb 3-4: USB disconnect, device number 2 Aug 30 09:55:17 debian7 kernel: [ 1268.547242] usb 3-4: new SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:17 debian7 kernel: [ 1268.563672] usb 3-4: New USB device found, idVendor=1f75, idProduct=0916 Aug 30 09:55:17 debian7 kernel: [ 1268.563677] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 09:55:17 debian7 kernel: [ 1268.563680] usb 3-4: Product: Silicon-Power16G Aug 30 09:55:17 debian7 kernel: [ 1268.563683] usb 3-4: Manufacturer: UFD 3.0 Aug 30 09:55:17 debian7 kernel: [ 1268.563685] usb 3-4: SerialNumber: 130102660580000348 Aug 30 09:55:17 debian7 kernel: [ 1268.564069] scsi10 : usb-storage 3-4:1.0 Aug 30 09:55:17 debian7 mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4" Aug 30 09:55:17 debian7 mtp-probe: bus: 3, device: 3 was not an MTP device Aug 30 09:55:18 debian7 kernel: [ 1269.560869] scsi 10:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 Aug 30 09:55:18 debian7 kernel: [ 1269.561908] sd 10:0:0:0: Attached scsi generic sg3 type 0 Aug 30 09:55:18 debian7 kernel: [ 1269.562621] sd 10:0:0:0: [sdc] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) Aug 30 09:55:18 debian7 kernel: [ 1269.562754] sd 10:0:0:0: [sdc] Write Protect is off Aug 30 09:55:18 debian7 kernel: [ 1269.562868] sd 10:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA Aug 30 09:55:18 debian7 kernel: [ 1269.564136] sdc: sdc1 Aug 30 09:55:18 debian7 kernel: [ 1269.566393] sd 10:0:0:0: [sdc] Attached SCSI removable disk Aug 30 09:55:51 debian7 kernel: [ 1302.216994] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.233150] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.233156] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.356678] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.372891] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.372895] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.496321] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.512390] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.512395] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.635953] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.652102] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.652107] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.811425] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1302.827449] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1302.827452] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1302.951083] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1302.967189] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1302.967203] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.106676] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.122685] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.122688] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.262290] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.279234] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.279239] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.397944] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.413949] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.413954] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.633339] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.649353] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.649388] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:53 debian7 kernel: [ 1303.968489] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:53 debian7 kernel: [ 1303.984499] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:53 debian7 kernel: [ 1303.984504] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:54 debian7 kernel: [ 1305.117522] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:54 debian7 kernel: [ 1305.133528] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:54 debian7 kernel: [ 1305.133532] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1305.915474] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1305.931526] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1305.931533] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1306.059113] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.075129] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1306.075135] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1306.198774] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.326252] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.541715] usb 3-4: USB disconnect, device number 3 Aug 30 09:55:55 debian7 kernel: [ 1306.549679] sd 10:0:0:0: [sdc] Unhandled error code Aug 30 09:55:55 debian7 kernel: [ 1306.549683] sd 10:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Aug 30 09:55:55 debian7 kernel: [ 1306.549696] sd 10:0:0:0: [sdc] CDB: Write(10): 2a 00 00 3a 0b d0 00 00 f0 00 Aug 30 09:55:55 debian7 kernel: [ 1306.549709] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549714] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549718] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549722] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549726] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549730] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549734] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549738] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549742] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549746] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.551902] sd 10:0:0:0: [sdc] Unhandled error code Aug 30 09:55:55 debian7 kernel: [ 1306.551904] sd 10:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Aug 30 09:55:55 debian7 kernel: [ 1306.551907] sd 10:0:0:0: [sdc] CDB: Write(10): 2a 00 00 3a 0c c0 00 00 f0 00 Aug 30 09:55:55 debian7 kernel: [ 1306.718708] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1306.718712] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:56 debian7 kernel: [ 1306.956666] usb 3-4: new SuperSpeed USB device number 4 using xhci_hcd Aug 30 09:55:56 debian7 kernel: [ 1306.972977] usb 3-4: New USB device found, idVendor=1f75, idProduct=0916 Aug 30 09:55:56 debian7 kernel: [ 1306.972981] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 09:55:56 debian7 kernel: [ 1306.972992] usb 3-4: Product: Silicon-Power16G Aug 30 09:55:56 debian7 kernel: [ 1306.972994] usb 3-4: Manufacturer: UFD 3.0 Aug 30 09:55:56 debian7 kernel: [ 1306.972996] usb 3-4: SerialNumber: 130102660580000348 Aug 30 09:55:56 debian7 kernel: [ 1306.973334] scsi11 : usb-storage 3-4:1.0 Aug 30 09:55:56 debian7 mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4" Aug 30 09:55:56 debian7 mtp-probe: bus: 3, device: 4 was not an MTP device Aug 30 09:55:57 debian7 kernel: [ 1307.970268] scsi 11:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 Aug 30 09:55:57 debian7 kernel: [ 1307.971187] sd 11:0:0:0: Attached scsi generic sg3 type 0 Aug 30 09:55:57 debian7 kernel: [ 1307.971963] sd 11:0:0:0: [sdd] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) Aug 30 09:55:57 debian7 kernel: [ 1307.972077] sd 11:0:0:0: [sdd] Write Protect is off Aug 30 09:55:57 debian7 kernel: [ 1307.972196] sd 11:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA Aug 30 09:55:57 debian7 kernel: [ 1307.973465] sdd: sdd1 Aug 30 09:55:57 debian7 kernel: [ 1307.974203] sd 11:0:0:0: [sdd] Attached SCSI removable disk

* /var/log/syslog :

Aug 30 09:49:07 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 Aug 30 09:49:24 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Aug 30 09:49:31 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 Aug 30 09:49:41 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Aug 30 09:49:47 debian7 dhclient: No DHCPOFFERS received. Aug 30 09:49:47 debian7 dhclient: No working leases in persistent database - sleeping. Aug 30 09:53:44 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Aug 30 09:53:52 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Aug 30 09:54:00 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 Aug 30 09:54:12 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 Aug 30 09:54:23 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 Aug 30 09:54:32 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 Aug 30 09:54:44 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 1 Aug 30 09:54:45 debian7 dhclient: No DHCPOFFERS received. Aug 30 09:54:45 debian7 dhclient: No working leases in persistent database - sleeping. Aug 30 09:55:05 debian7 ntfs-3g[7988]: Unmounting /dev/sdc1 (SP_USB3) Aug 30 09:55:05 debian7 kernel: [ 1256.436451] sdc: detected capacity change from 15518924800 to 0 Aug 30 09:55:09 debian7 kernel: [ 1260.304353] usb 3-4: USB disconnect, device number 2 Aug 30 09:55:17 debian7 kernel: [ 1268.547242] usb 3-4: new SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:17 debian7 kernel: [ 1268.563672] usb 3-4: New USB device found, idVendor=1f75, idProduct=0916 Aug 30 09:55:17 debian7 kernel: [ 1268.563677] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 09:55:17 debian7 kernel: [ 1268.563680] usb 3-4: Product: Silicon-Power16G Aug 30 09:55:17 debian7 kernel: [ 1268.563683] usb 3-4: Manufacturer: UFD 3.0 Aug 30 09:55:17 debian7 kernel: [ 1268.563685] usb 3-4: SerialNumber: 130102660580000348 Aug 30 09:55:17 debian7 kernel: [ 1268.564069] scsi10 : usb-storage 3-4:1.0 Aug 30 09:55:17 debian7 mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4" Aug 30 09:55:17 debian7 mtp-probe: bus: 3, device: 3 was not an MTP device Aug 30 09:55:18 debian7 kernel: [ 1269.560869] scsi 10:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 Aug 30 09:55:18 debian7 kernel: [ 1269.561908] sd 10:0:0:0: Attached scsi generic sg3 type 0 Aug 30 09:55:18 debian7 kernel: [ 1269.562621] sd 10:0:0:0: [sdc] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) Aug 30 09:55:18 debian7 kernel: [ 1269.562754] sd 10:0:0:0: [sdc] Write Protect is off Aug 30 09:55:18 debian7 kernel: [ 1269.562758] sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00 Aug 30 09:55:18 debian7 kernel: [ 1269.562868] sd 10:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA Aug 30 09:55:18 debian7 kernel: [ 1269.564136] sdc: sdc1 Aug 30 09:55:18 debian7 kernel: [ 1269.566393] sd 10:0:0:0: [sdc] Attached SCSI removable disk Aug 30 09:55:18 debian7 ntfs-3g[8476]: Version 2012.1.15AR.5 external FUSE 29 Aug 30 09:55:18 debian7 ntfs-3g[8476]: Mounted /dev/sdc1 (Read-Write, label "SP_USB3", NTFS 3.1) Aug 30 09:55:18 debian7 ntfs-3g[8476]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177 Aug 30 09:55:18 debian7 ntfs-3g[8476]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sdc1,blkdev,blksize=4096 Aug 30 09:55:18 debian7 ntfs-3g[8476]: Global ownership and permissions enforced, configuration type 7 Aug 30 09:55:51 debian7 kernel: [ 1302.216994] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.233150] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.233156] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.356678] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.372891] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.372895] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.496321] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.512390] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.512395] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.635953] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:51 debian7 kernel: [ 1302.652102] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:51 debian7 kernel: [ 1302.652107] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:51 debian7 kernel: [ 1302.811425] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1302.827449] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1302.827452] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1302.951083] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1302.967189] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1302.967203] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.106676] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.122685] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.122688] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.262290] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.279234] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.279239] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.397944] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.413949] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.413954] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:52 debian7 kernel: [ 1303.633339] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:52 debian7 kernel: [ 1303.649353] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:52 debian7 kernel: [ 1303.649388] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:53 debian7 kernel: [ 1303.968489] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:53 debian7 kernel: [ 1303.984499] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:53 debian7 kernel: [ 1303.984504] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:54 debian7 kernel: [ 1305.117522] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:54 debian7 kernel: [ 1305.133528] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:54 debian7 kernel: [ 1305.133532] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1305.915474] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1305.931526] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1305.931533] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1306.059113] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.075129] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1306.075135] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:55 debian7 kernel: [ 1306.198774] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.225084] usb 3-4: device descriptor read/8, error -71 Aug 30 09:55:55 debian7 kernel: [ 1306.326252] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd Aug 30 09:55:55 debian7 kernel: [ 1306.352496] usb 3-4: device descriptor read/8, error -71 Aug 30 09:55:55 debian7 kernel: [ 1306.541715] usb 3-4: USB disconnect, device number 3 Aug 30 09:55:55 debian7 kernel: [ 1306.549679] sd 10:0:0:0: [sdc] Unhandled error code Aug 30 09:55:55 debian7 kernel: [ 1306.549683] sd 10:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Aug 30 09:55:55 debian7 kernel: [ 1306.549696] sd 10:0:0:0: [sdc] CDB: Write(10): 2a 00 00 3a 0b d0 00 00 f0 00 Aug 30 09:55:55 debian7 kernel: [ 1306.549703] end_request: I/O error, dev sdc, sector 3804112 Aug 30 09:55:55 debian7 kernel: [ 1306.549707] Buffer I/O error on device sdc1, logical block 475258 Aug 30 09:55:55 debian7 kernel: [ 1306.549709] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549712] Buffer I/O error on device sdc1, logical block 475259 Aug 30 09:55:55 debian7 kernel: [ 1306.549714] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549716] Buffer I/O error on device sdc1, logical block 475260 Aug 30 09:55:55 debian7 kernel: [ 1306.549718] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549720] Buffer I/O error on device sdc1, logical block 475261 Aug 30 09:55:55 debian7 kernel: [ 1306.549722] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549724] Buffer I/O error on device sdc1, logical block 475262 Aug 30 09:55:55 debian7 kernel: [ 1306.549726] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549728] Buffer I/O error on device sdc1, logical block 475263 Aug 30 09:55:55 debian7 kernel: [ 1306.549730] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549732] Buffer I/O error on device sdc1, logical block 475264 Aug 30 09:55:55 debian7 kernel: [ 1306.549734] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549736] Buffer I/O error on device sdc1, logical block 475265 Aug 30 09:55:55 debian7 kernel: [ 1306.549738] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549740] Buffer I/O error on device sdc1, logical block 475266 Aug 30 09:55:55 debian7 kernel: [ 1306.549742] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.549744] Buffer I/O error on device sdc1, logical block 475267 Aug 30 09:55:55 debian7 kernel: [ 1306.549746] lost page write due to I/O error on sdc1 Aug 30 09:55:55 debian7 kernel: [ 1306.551902] sd 10:0:0:0: [sdc] Unhandled error code Aug 30 09:55:55 debian7 kernel: [ 1306.551904] sd 10:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Aug 30 09:55:55 debian7 kernel: [ 1306.551907] sd 10:0:0:0: [sdc] CDB: Write(10): 2a 00 00 3a 0c c0 00 00 f0 00 Aug 30 09:55:55 debian7 kernel: [ 1306.551914] end_request: I/O error, dev sdc, sector 3804352 Aug 30 09:55:55 debian7 kernel: [ 1306.718708] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee500 Aug 30 09:55:55 debian7 kernel: [ 1306.718712] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801f9fee4c0 Aug 30 09:55:56 debian7 kernel: [ 1306.956666] usb 3-4: new SuperSpeed USB device number 4 using xhci_hcd Aug 30 09:55:56 debian7 kernel: [ 1306.972977] usb 3-4: New USB device found, idVendor=1f75, idProduct=0916 Aug 30 09:55:56 debian7 kernel: [ 1306.972981] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 09:55:56 debian7 kernel: [ 1306.972992] usb 3-4: Product: Silicon-Power16G Aug 30 09:55:56 debian7 kernel: [ 1306.972994] usb 3-4: Manufacturer: UFD 3.0 Aug 30 09:55:56 debian7 kernel: [ 1306.972996] usb 3-4: SerialNumber: 130102660580000348 Aug 30 09:55:56 debian7 kernel: [ 1306.973334] scsi11 : usb-storage 3-4:1.0 Aug 30 09:55:56 debian7 mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4" Aug 30 09:55:56 debian7 mtp-probe: bus: 3, device: 4 was not an MTP device Aug 30 09:55:57 debian7 kernel: [ 1307.970268] scsi 11:0:0:0: Direct-Access UFD 3.0 Silicon-Power16G 1.00 PQ: 0 ANSI: 6 Aug 30 09:55:57 debian7 kernel: [ 1307.971187] sd 11:0:0:0: Attached scsi generic sg3 type 0 Aug 30 09:55:57 debian7 kernel: [ 1307.971963] sd 11:0:0:0: [sdd] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB) Aug 30 09:55:57 debian7 kernel: [ 1307.972077] sd 11:0:0:0: [sdd] Write Protect is off Aug 30 09:55:57 debian7 kernel: [ 1307.972081] sd 11:0:0:0: [sdd] Mode Sense: 23 00 00 00 Aug 30 09:55:57 debian7 kernel: [ 1307.972196] sd 11:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA Aug 30 09:55:57 debian7 kernel: [ 1307.973465] sdd: sdd1 Aug 30 09:55:57 debian7 kernel: [ 1307.974203] sd 11:0:0:0: [sdd] Attached SCSI removable disk Aug 30 09:55:58 debian7 ntfs-3g[8476]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Aug 30 09:55:58 debian7 ntfs-3g[8476]: Reading $BITMAP failed: Input/output error Aug 30 09:55:58 debian7 ntfs-3g[8476]: Failed to allocate clusters: Input/output error Aug 30 09:55:58 debian7 ntfs-3g[8476]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Aug 30 09:55:58 debian7 ntfs-3g[8476]: Reading $BITMAP failed: Input/output error Aug 30 09:55:58 debian7 ntfs-3g[8476]: Failed to allocate clusters: Input/output error Aug 30 09:55:58 debian7 ntfs-3g[8476]: Unmounting /dev/sdc1 (SP_USB3) Aug 30 10:02:06 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Aug 30 10:02:14 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 Aug 30 10:02:27 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Aug 30 10:02:34 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 Aug 30 10:02:47 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 Aug 30 10:03:01 debian7 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Aug 30 10:03:07 debian7 dhclient: No DHCPOFFERS received. Aug 30 10:03:07 debian7 dhclient: No working leases in persistent database - sleeping. Aug 30 10:04:11 debian7 smartd[3019]: Device: /dev/sda [SAT], SMART Usage Attribute: 189 High_Fly_Writes changed from 11 to 13 Aug 30 10:04:11 debian7 smartd[3019]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 11 to 13 Aug 30 10:04:11 debian7 smartd[3019]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 78 to 72 Aug 30 10:04:11 debian7 smartd[3019]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 28 Aug 30 10:04:11 debian7 smartd[3019]: Device: /dev/sdb [SAT], offline data collection was completed without error (auto:on)

[quote=“Ragouzi”]* J’ai bien le paquet ntfs-3g qui est installé.

  • J’ai acheté cette clé USB 3 chez LDLC il y a quelques mois, elle semble être récente mais j’ai pas de détails plus précis.

  • La clé était livrée formatée en FAT32, depuis je l’ai mise en NTFS.

  • J’ai essayé de transférer un autre type de fichier (une .iso), le transfert plante.

  • Tentative de transfert après avoir formaté la clé en ext4, échec du transfert également.

Pour les logs je vais voir ça demain.

Merci.[/quote]

Quelle est précisément la commande utilisée pour effectuer le transfert

[quote=“ggoodluck47”]

Quelle est précisément la commande utilisée pour effectuer le transfert[/quote]

En mode graphique, CTRL+C CTRL+V

J’ai également essayé en ligne de commande avec “cp”, ça plante aussi: clé éjectée et système de fichier de ma clé corrompu, obligé de formater.

Salut,

Peut-on connaître la finalité du transfert .iso ?


Clé USB3 branché.

Est-elle monté ? Sinon …

?

?


Une histoire de :

Firmware ?

  • Module monté ou non ? Peut être à creuser.

Toujours rien en ext3/ext4 …


Nota: je suis un peu comme toi, sur ce coup, hein … à tâtons et sans filet. … ¿~)

Comme je le disais hier, le transfert de l’iso a échoué tout comme les transferts de films…

Une fois la clé USB branchée en USB3, elle est montée automatiquement et reconnue, tout semble bien se passer jusqu’au moment où un transfert débute:

* fdisk -l :

Périphérique Amorce Début Fin Blocs Id Système /dev/sdc1 2048 30310399 15154176 7 HPFS/NTFS/exFAT

* mount :

* blkid :

* cat /etc/mtab :

* dpkg -l | grep firmware :

J’ai formaté la clé en ext4 hier et ça n’a rien changé.

* lsmod :

Module Size Used by usb_storage 43870 1 fuse 62020 3 btrfs 505636 0 libcrc32c 12426 1 btrfs zlib_deflate 25638 1 btrfs ufs 58774 0 qnx4 13184 0 hfsplus 71616 0 hfs 45877 0 minix 27623 0 ntfs 163882 0 vfat 17316 0 msdos 17077 0 fat 45642 2 msdos,vfat jfs 137196 0 xfs 590895 0 reiserfs 192132 0 ext3 162072 0 jbd 56902 1 ext3 ext2 59231 0 efivars 17916 0 dm_mod 63645 0 aes_x86_64 16843 1 aes_generic 33026 1 aes_x86_64 ppdev 12763 0 lp 17149 0 rfcomm 33700 0 bnep 17567 2 bluetooth 119455 10 bnep,rfcomm binfmt_misc 12957 1 nfsd 216170 2 nfs 308313 0 nfs_acl 12511 2 nfs,nfsd auth_rpcgss 37143 2 nfs,nfsd fscache 36739 1 nfs lockd 67306 2 nfs,nfsd sunrpc 173730 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd ip6t_LOG 12609 4 xt_hl 12449 6 ip6t_rt 12499 3 nf_conntrack_ipv6 13316 7 nf_defrag_ipv6 12832 1 nf_conntrack_ipv6 ipt_REJECT 12502 1 ipt_LOG 12605 5 xt_limit 12638 12 xt_tcpudp 12570 22 xt_addrtype 12557 4 xt_state 12503 14 ip6table_filter 12540 1 ip6_tables 22175 3 ip6table_filter,ip6t_rt,ip6t_LOG nf_conntrack_netbios_ns 12445 0 nf_conntrack_broadcast 12365 1 nf_conntrack_netbios_ns nf_nat_ftp 12460 0 nf_nat 18242 1 nf_nat_ftp nf_conntrack_ipv4 14078 9 nf_nat nf_defrag_ipv4 12483 1 nf_conntrack_ipv4 nf_conntrack_ftp 12605 1 nf_nat_ftp nf_conntrack 52720 8 nf_conntrack_ftp,nf_conntrack_ipv4,nf_nat,nf_nat_ftp,nf_conntrack_broadcast,nf_conntrack_netbios_ns,xt_state,nf_conntrack_ipv6 iptable_filter 12536 1 ip_tables 22042 1 iptable_filter x_tables 19118 13 ip_tables,iptable_filter,ip6_tables,ip6table_filter,xt_state,xt_addrtype,xt_tcpudp,xt_limit,ipt_LOG,ipt_REJECT,ip6t_rt,xt_hl,ip6t_LOG loop 22641 0 snd_hda_codec_hdmi 30824 1 snd_hda_codec_realtek 188858 1 arc4 12458 2 joydev 17266 0 coretemp 12898 0 ath9k 73578 0 ath9k_common 12728 1 ath9k ath9k_hw 322112 2 ath9k_common,ath9k ath 21370 3 ath9k_hw,ath9k_common,ath9k mac80211 192806 1 ath9k crc32c_intel 12747 1 evdev 17562 15 snd_hda_intel 26259 4 snd_hda_codec 78031 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi cfg80211 137243 3 mac80211,ath,ath9k snd_hwdep 13186 1 snd_hda_codec snd_pcm 68083 4 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi snd_page_alloc 13003 2 snd_pcm,snd_hda_intel rfkill 19012 5 cfg80211,bluetooth psmouse 69265 0 ghash_clmulni_intel 13173 0 snd_seq 45126 0 snd_seq_device 13176 1 snd_seq parport_pc 22364 1 pcspkr 12579 0 parport 31858 3 parport_pc,lp,ppdev cryptd 14517 1 ghash_clmulni_intel serio_raw 12931 0 i2c_i801 16870 0 snd_timer 22917 2 snd_seq,snd_pcm snd 52889 16 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi i915 378417 3 video 17683 1 i915 drm_kms_helper 31370 1 i915 iTCO_wdt 17081 0 drm 183952 4 drm_kms_helper,i915 iTCO_vendor_support 12704 1 iTCO_wdt i2c_algo_bit 12841 1 i915 i2c_core 23876 5 i2c_algo_bit,drm,drm_kms_helper,i915,i2c_i801 soundcore 13065 1 snd acpi_cpufreq 12935 0 mperf 12453 1 acpi_cpufreq button 12937 1 i915 processor 28157 1 acpi_cpufreq thermal_sys 18040 2 processor,video ext4 350763 2 crc16 12343 2 ext4,bluetooth jbd2 62115 1 ext4 mbcache 13114 3 ext4,ext2,ext3 sr_mod 21899 0 usbhid 36418 0 sg 25874 0 cdrom 35401 1 sr_mod hid 81328 1 usbhid sd_mod 36136 7 crc_t10dif 12348 1 sd_mod ahci 24997 3 libahci 22860 1 ahci xhci_hcd 73434 0 ehci_hcd 40215 0 libata 140630 2 libahci,ahci scsi_mod 162269 5 libata,sd_mod,sg,sr_mod,usb_storage r8169 46972 0 mii 12675 1 r8169 usbcore 128741 5 ehci_hcd,xhci_hcd,usbhid,usb_storage usb_common 12354 1 usbcore

xhci_hcd est bien actif, si je ne trompe pas c’est bien ce module qui gère l’USB3 ?

Merci pour les efforts.

:023


On y reviendra, peut être.

Aaaha, Une piste ?

[11:23:39][] ~ # depmod -a
[11:23:51][] ~ # cat /lib/modules/3.2.0-4-686-pae/modules.dep | grep xhci_hcd

Recherches la/les ligne correspondante en :

[11:24:29][] ~ # nano -c /lib/modules/3.2.0-4-686-pae/modules.dep

et suis les éventuels dépendances.


* edit *

As-tu farfouillé¹, par …


¹ Mots clés : “xhci xhci_drop_endpoint called with disabled ep”

* cat /lib/modules/3.2.0-4-amd64/modules.dep | grep xhci_hcd :
rien

* cat /lib/modules/3.2.0-4-amd64/modules.dep | grep xhci :

* cat /lib/modules/3.2.0-4-amd64/modules.dep | grep hcd :

kernel/drivers/usb/host/whci/whci-hcd.ko: kernel/drivers/uwb/whci.ko kernel/drivers/uwb/umc.ko kernel/drivers/usb/wusbcore/wusbcore.ko kernel/drivers/uwb/uwb.ko kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/ehci-hcd.ko: kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/isp116x-hcd.ko: kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/ohci-hcd.ko: kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/uhci-hcd.ko: kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/xhci-hcd.ko: kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/sl811-hcd.ko: kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/sl811_cs.ko: kernel/drivers/usb/host/sl811-hcd.ko kernel/drivers/pcmcia/pcmcia.ko kernel/drivers/pcmcia/pcmcia_core.ko kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/u132-hcd.ko: kernel/drivers/usb/misc/ftdi-elan.ko kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/usb/host/r8a66597-hcd.ko: kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko kernel/drivers/staging/usbip/vhci-hcd.ko: kernel/drivers/staging/usbip/usbip-core.ko kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/usb-common.ko

Concernant une recherche avec “xhci_drop_endpoint called with disabled ep”, j’avais vu soit un problème avec le noyau qui se réglerai avec le noyau 3.6, soit un problème de module. Mais avec Debian stable, je ne crois pas qu’il y ait déjà un nouveau noyau dans les backports, en même temps je suis peut-être passé à coté, je suis novice sur cette distrib.

Modules montés, non pas, telle est la question, peut être … :think:


  • j’ai édité ci-plus haut.

[quote=“BelZéButh”]Modules montés, non pas, telle est la question, peut être … :think:
[/quote]

Pourtant dans les logs il est bien mentionné que le module xhci_hcd est utilisé.

[quote=“Ragouzi”]Concernant une recherche avec “xhci_drop_endpoint called with disabled ep”, j’avais vu soit un problème avec le noyau qui se réglerai avec le noyau 3.6


soit un problème de module.


Mais avec Debian stable, je ne crois pas qu’il y ait déjà un nouveau noyau dans les backports, en même temps je suis peut-être passé à coté, je suis novice sur cette distrib.[/quote]

Et ben la solution est probablement là, suite à ta quête, non …

Quel est donc ce noyau mystère …

Pas “preferences” ?


Au fait, rien à voir, mais installes apt-listbugs, si ce n’est fait (ps : doc sur le wiki)

As tu essayé avec une autre clé USB?

c’est peut être le port USB du PC qui accuse le coup…