Freeze complet à des moments arbitraires

[Gikiam]

Bonjour,

J’ai installé Debian Wheezy sur mon nouvel ordinateur, un Acer Aspire V3-571G, et celui est peu utilisable à cause de désagréables freezes complets survenant arbitrairement. Ceux-ci ne semblent pas dûs à une application spécifique, car ils surviennent avec des applications différentes, et le seul moyen de les reproduire et de les “attendre”. Le freeze lui même est le plus complet possible (problème matériel?), plus de souris, ni de TTY, pas même de alt + sys + k possible, et le son en boucle. Je ne vois vraiment pas d’où cela peut venir, donc je vous envoie des infos complètes :
Mon noyau est :

Mon matériel:

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GeForce GT 630M (rev ff) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10) 02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10) 02:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10) 02:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10) 03:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n

Mes périphériques :

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 046d:c062 Logitech, Inc. LS1 Laser Mouse, corded Bus 003 Device 003: ID 1058:071a Western Digital Technologies, Inc. My Passport 1TB Bus 001 Device 003: ID 0489:e046 Foxconn / Hon Hai Bus 001 Device 004: ID 1bcf:2c18 Sunplus Innovation Technology Inc.

dmidecode

[code]# dmidecode 2.11
SMBIOS 2.7 present.
38 structures occupying 1943 bytes.
Table at 0x000E6720.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Acer
Version: V1.07
Release Date: 05/11/2012
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 3584 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
8042 keyboard services are supported (int 9h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 1.7
Firmware Revision: 0.0

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Acer
Product Name: Aspire V3-571G
Version: V1.07
Serial Number: NXRZJEF0082240D1423400
UUID: 999C694F-F9B4-E111-A5DA-B888E3097C1E
Wake-up Type: Power Switch
SKU Number: Type1Sku0
Family: Type1Family

Handle 0x0002, DMI type 2, 16 bytes
Base Board Information
Manufacturer: Acer
Product Name: VA50_HC_CR
Version: Type2 - Board Version
Serial Number: NBRZK110012241A2923400
Asset Tag: Type2 - Board Asset Tag
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Type2 - Board Chassis Location
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0

Handle 0x0003, DMI type 3, 23 bytes
Chassis Information
Manufacturer: Acer
Type: Notebook
Lock: Not Present
Version: V1.07
Serial Number: NXRZJEF0082240D1423400
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
SKU Number: Not Specified

Handle 0x0004, DMI type 9, 17 bytes
System Slot Information
Designation: J5C1
Type: x16 PCI Express x16
Current Usage: Available
Length: Other
ID: 1
Characteristics:
PME signal is supported
Hot-plug devices are supported
Bus Address: 0000:00:01.0

Handle 0x0005, DMI type 9, 17 bytes
System Slot Information
Designation: J6C1
Type: x1 PCI Express x1
Current Usage: Available
Length: Other
ID: 2
Characteristics:
PME signal is supported
Hot-plug devices are supported
Bus Address: 0000:00:1c.0

Handle 0x0006, DMI type 9, 17 bytes
System Slot Information
Designation: J6C2
Type: x1 PCI Express x1
Current Usage: Available
Length: Other
ID: 3
Characteristics:
PME signal is supported
Hot-plug devices are supported
Bus Address: 0000:00:1c.1

Handle 0x0007, DMI type 9, 17 bytes
System Slot Information
Designation: J6D2
Type: x1 PCI Express x1
Current Usage: Available
Length: Other
ID: 4
Characteristics:
PME signal is supported
Hot-plug devices are supported
Bus Address: 0000:00:1c.2

Handle 0x0008, DMI type 9, 17 bytes
System Slot Information
Designation: J7C1
Type: x1 PCI Express x1
Current Usage: Available
Length: Other
ID: 5
Characteristics:
PME signal is supported
Hot-plug devices are supported
Bus Address: 0000:00:1c.3

Handle 0x0009, DMI type 9, 17 bytes
System Slot Information
Designation: J7D2
Type: x1 PCI Express x1
Current Usage: Available
Length: Other
ID: 6
Characteristics:
PME signal is supported
Hot-plug devices are supported
Bus Address: 0000:00:1c.4

Handle 0x000A, DMI type 9, 17 bytes
System Slot Information
Designation: J8C1
Type: x1 PCI Express x1
Current Usage: Available
Length: Other
ID: 7
Characteristics:
PME signal is supported
Hot-plug devices are supported
Bus Address: 0000:00:1c.5

Handle 0x000B, DMI type 9, 17 bytes
System Slot Information
Designation: J8C2
Type: x16 PCI Express x16
Current Usage: Available
Length: Other
ID: 8
Characteristics:
PME signal is supported
Hot-plug devices are supported
Bus Address: 0000:00:1c.7

Handle 0x000C, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: Video Graphics Controller

Handle 0x000D, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Lan Controller

Handle 0x000E, DMI type 11, 5 bytes
OEM Strings
String 1: String1 for Original Equipment Manufacturer
String 2: String2 for Original Equipment Manufacturer
String 3: String3 for Original Equipment Manufacturer
String 4: String4 for Original Equipment Manufacturer
String 5: String5 for Original Equipment Manufacturer

Handle 0x000F, DMI type 12, 5 bytes
System Configuration Options
Option 1:
Option 2: String2 for Type12 Equipment Manufacturer
Option 3: String3 for Type12 Equipment Manufacturer
Option 4: String4 for Type12 Equipment Manufacturer

Handle 0x0010, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 16 GB
Error Information Handle: Not Provided
Number Of Devices: 4

Handle 0x0011, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0010
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor:
Set: None
Locator: DIMM0
Bank Locator: BANK 0
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Empty
Serial Number: Empty
Asset Tag: Unknown
Part Number: Empty
Rank: Unknown
Configured Clock Speed: Unknown

Handle 0x0012, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: None
Current Speed: Unknown
Type: None
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK

Handle 0x0013, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0010
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor:
Set: None
Locator: DIMM1
Bank Locator: BANK 1
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Empty
Serial Number: Empty
Asset Tag: Unknown
Part Number: Empty
Rank: Unknown
Configured Clock Speed: Unknown

Handle 0x0014, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: None
Current Speed: Unknown
Type: None
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK

Handle 0x0015, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0010
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK 2
Type: DDR3
Type Detail: Synchronous
Speed: 666 MHz
Manufacturer: Nanya Technology
Serial Number: 845B15E8
Asset Tag: Unknown
Part Number: NT4GC64B8HG0NS-CG
Rank: 2
Configured Clock Speed: 1333 MHz

Handle 0x0016, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: None
Current Speed: Unknown
Type: DIMM
Installed Size: 4096 MB (Single-bank Connection)
Enabled Size: 4096 MB (Single-bank Connection)
Error Status: OK

Handle 0x0017, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Device Handle: 0x0015
Memory Array Mapped Address Handle: 0x001A
Partition Row Position: Unknown
Interleave Position: 2
Interleaved Data Depth: 1

Handle 0x0018, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0010
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor:
Set: None
Locator: DIMM3
Bank Locator: BANK 3
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Empty
Serial Number: Empty
Asset Tag: Unknown
Part Number: Empty
Rank: Unknown
Configured Clock Speed: Unknown

Handle 0x0019, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: None
Current Speed: Unknown
Type: None
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK

Handle 0x001A, DMI type 19, 31 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0010
Partition Width: 4

Handle 0x001B, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 8192 MB
Maximum Total Memory Size: 32768 MB
Supported Speeds:
Other
Supported Memory Types:
Other
Memory Module Voltage: Unknown
Associated Memory Slots: 4
0x0012
0x0014
0x0016
0x0019
Enabled Error Correcting Capabilities:
None

Handle 0x001C, DMI type 170, 82 bytes
OEM-specific Type
Header and Data:
AA 52 1C 00 01 08 19 00 7F 00 0F 00 06 00 03 02
01 08 21 02 00 00 23 02 00 00 25 02 00 00 41 02
04 00 48 02 01 00 49 02 02 00 42 02 20 00 43 02
40 00 44 02 08 00 45 02 10 00 61 02 08 00 64 02
04 00 62 02 01 00 63 02 02 00 81 02 04 00 83 02
02 00

Handle 0x001D, DMI type 171, 39 bytes
OEM-specific Type
Header and Data:
AB 27 1D 00 01 86 80 66 01 01 DE 10 E9 0D 02 E4
14 B5 16 05 86 80 20 1E 07 E4 14 59 43 04 CF 1B
18 2C 08 89 04 46 E0

Handle 0x001E, DMI type 172, 18 bytes
OEM-specific Type
Header and Data:
AC 12 1E 00 02 11 01 FF 00 02 03 00 03 FF 00 04
01 00

Handle 0x001F, DMI type 173, 9 bytes
OEM-specific Type
Header and Data:
AD 09 1F 00 00 00 00 00 00

Handle 0x0020, DMI type 4, 42 bytes
Processor Information
Socket Designation: U3E1
Type: Central Processor
Family: Core i7
Manufacturer: Intel® Corporation
ID: A9 06 03 00 FF FB EB BF
Signature: Type 0, Family 6, Model 58, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel® Core™ i5-3210M CPU @ 2.50GHz
Voltage: 0.9 V
External Clock: 100 MHz
Max Speed: 4000 MHz
Current Speed: 2500 MHz
Status: Populated, Enabled
Upgrade: Socket rPGA988B
L1 Cache Handle: 0x0022
L2 Cache Handle: 0x0023
L3 Cache Handle: 0x0024
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 2
Core Enabled: 2
Thread Count: 4
Characteristics:
64-bit capable
Multi-Core
Hardware Thread
Execute Protection
Enhanced Virtualization
Power/Performance Control

Handle 0x0021, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: 8-way Set-associative

Handle 0x0022, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Parity
System Type: Instruction
Associativity: 8-way Set-associative

Handle 0x0023, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 8-way Set-associative

Handle 0x0024, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3 Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 3072 kB
Maximum Size: 3072 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 12-way Set-associative

Handle 0x0025, DMI type 127, 4 bytes
End Of Table
[/code]

Je dépasse la limite de caractères, je crée un deuxième message pour le dmesg

[Gikiam]

dmesg

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable) [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved) [ 0.000000] BIOS-e820: 0000000040005000 - 0000000096abf000 (usable) [ 0.000000] BIOS-e820: 0000000096abf000 - 0000000096ebf000 (reserved) [ 0.000000] BIOS-e820: 0000000096ebf000 - 0000000096fbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000096fbf000 - 0000000096fff000 (ACPI data) [ 0.000000] BIOS-e820: 0000000096fff000 - 0000000097000000 (usable) [ 0.000000] BIOS-e820: 0000000097000000 - 000000009fa00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000015f600000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: Acer Aspire V3-571G/VA50_HC_CR, BIOS V1.07 05/11/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x15f600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 097000000 mask FFF000000 uncachable [ 0.000000] 3 base 098000000 mask FF8000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 140000000 mask FE0000000 write-back [ 0.000000] 7 base 15F600000 mask FFFE00000 uncachable [ 0.000000] 8 base 15F800000 mask FFF800000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 36b7e000 - 375b7000 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 96ffe210 00094 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 96ffb000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 96fec000 0B783 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 96fbb000 00040 [ 0.000000] ACPI: UEFI 96ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 96ffc000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 96ffa000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 96ff9000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 96ff8000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 96feb000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 96fea000 006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 96fe8000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 96fe3000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 96fe1000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 96fe0000 00968 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 96fdf000 00A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 96fdc000 0217A (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4732MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0015f600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040004 [ 0.000000] 0: 0x00040005 -> 0x00096abf [ 0.000000] 0: 0x00096fff -> 0x00097000 [ 0.000000] 0: 0x00100000 -> 0x0015f600 [ 0.000000] On node 0 totalpages: 1007180 [ 0.000000] free_area_init_node: node 0, pgdat c140fec0, node_mem_map f3f8e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221482 pages, LIFO batch:31 [ 0.000000] HighMem zone: 9465 pages used for memmap [ 0.000000] HighMem zone: 770504 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f797a000 s33280 r0 d24064 u57344 [ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995935 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=4d11048c-91a2-4f20-8609-e1e04d5ba06d ro quiet splash acpi_osi=Linux acpi_backlight=vendor splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000379fe:0015f600) [ 0.000000] Memory: 3966716k/5756928k available (2843k kernel code, 62004k reserved, 1346k data, 416k init, 3119876k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc1418000 - 0xc1480000 ( 416 kB) [ 0.000000] .data : 0xc12c6d84 - 0xc14177c0 (1346 kB) [ 0.000000] .text : 0xc1000000 - 0xc12c6d84 (2843 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f3806000 soft=f3808000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2494.062 MHz processor. [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.12 BogoMIPS (lpj=9976248) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000024] Security Framework initialized [ 0.000027] AppArmor: AppArmor disabled by boot time parameter [ 0.000036] Mount-cache hash table entries: 512 [ 0.000107] Initializing cgroup subsys cpuacct [ 0.000111] Initializing cgroup subsys memory [ 0.000115] Initializing cgroup subsys devices [ 0.000117] Initializing cgroup subsys freezer [ 0.000118] Initializing cgroup subsys net_cls [ 0.000120] Initializing cgroup subsys blkio [ 0.000123] Initializing cgroup subsys perf_event [ 0.000144] CPU: Physical Processor ID: 0 [ 0.000146] CPU: Processor Core ID: 0 [ 0.000149] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000150] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000866] mce: CPU supports 7 MCE banks [ 0.000877] CPU0: Thermal monitoring enabled (TM1) [ 0.000883] using mwait in idle threads. [ 0.001250] ACPI: Core revision 20110623 [ 0.023983] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024383] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064011] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09 [ 0.167953] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver. [ 0.167959] ... version: 3 [ 0.167960] ... bit width: 48 [ 0.167961] ... generic registers: 4 [ 0.167963] ... value mask: 0000ffffffffffff [ 0.167964] ... max period: 000000007fffffff [ 0.167965] ... fixed-purpose events: 3 [ 0.167967] ... event mask: 000000070000000f [ 0.168097] NMI watchdog enabled, takes one hw-pmu counter. [ 0.168167] CPU 1 irqstacks, hard=f3932000 soft=f3934000 [ 0.168169] Booting Node 0, Processors #1 [ 0.168171] smpboot cpu 1: start_ip = 99000 [ 0.178454] Initializing CPU#1 [ 0.276672] NMI watchdog enabled, takes one hw-pmu counter. [ 0.276745] CPU 2 irqstacks, hard=f3944000 soft=f3946000 [ 0.276747] #2 [ 0.276748] smpboot cpu 2: start_ip = 99000 [ 0.286979] Initializing CPU#2 [ 0.384460] NMI watchdog enabled, takes one hw-pmu counter. [ 0.384531] CPU 3 irqstacks, hard=f3976000 soft=f3978000 [ 0.384532] #3 [ 0.384533] smpboot cpu 3: start_ip = 99000 [ 0.394762] Initializing CPU#3 [ 0.492343] NMI watchdog enabled, takes one hw-pmu counter. [ 0.492362] Brought up 4 CPUs [ 0.492364] Total of 4 processors activated (19953.43 BogoMIPS). [ 0.495744] devtmpfs: initialized [ 0.495856] PM: Registering ACPI NVS region at 96ebf000 (1048576 bytes) [ 0.495978] print_constraints: dummy: [ 0.496017] NET: Registered protocol family 16 [ 0.496077] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.496079] ACPI: bus type pci registered [ 0.496136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.496139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.496141] PCI: Using MMCONFIG for extended config space [ 0.496142] PCI: Using configuration type 1 for base access [ 0.496605] bio: create slab <bio-0> at 0 [ 0.496664] ACPI: Added _OSI(Module Device) [ 0.496665] ACPI: Added _OSI(Processor Device) [ 0.496667] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.496669] ACPI: Added _OSI(Processor Aggregator Device) [ 0.496670] ACPI: Added _OSI(Linux) [ 0.497944] ACPI: EC: Look up EC in DSDT [ 0.499200] ACPI: Executed 1 blocks of module-level executable AML code [ 0.523544] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.523851] ACPI: SSDT 96e18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.524174] ACPI: Dynamic OEM Table Load: [ 0.524176] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.535660] ACPI: SSDT 96e19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.536005] ACPI: Dynamic OEM Table Load: [ 0.536007] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.547532] ACPI: SSDT 96e17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.547847] ACPI: Dynamic OEM Table Load: [ 0.547849] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.559960] ACPI: Interpreter enabled [ 0.559965] ACPI: (supports S0 S3 S4 S5) [ 0.559983] ACPI: Using IOAPIC for interrupt routing [ 0.682350] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.682489] ACPI: No dock devices found. [ 0.682491] HEST: Table not found. [ 0.682494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.682766] \_SB_.PCI0:_OSC invalid UUID [ 0.682768] _OSC request data:1 8 1f [ 0.682771] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.683212] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.683214] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.683216] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.683219] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff] [ 0.683229] pci 0000:00:00.0: [8086:0154] type 0 class 0x000600 [ 0.683266] pci 0000:00:01.0: [8086:0151] type 1 class 0x000604 [ 0.683296] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.683317] pci 0000:00:02.0: [8086:0166] type 0 class 0x000300 [ 0.683327] pci 0000:00:02.0: reg 10: [mem 0xb3400000-0xb37fffff 64bit] [ 0.683332] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.683337] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.683389] pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03 [ 0.683410] pci 0000:00:14.0: reg 10: [mem 0xb3a00000-0xb3a0ffff 64bit] [ 0.683481] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.683504] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780 [ 0.683527] pci 0000:00:16.0: reg 10: [mem 0xb3a14000-0xb3a1400f 64bit] [ 0.683603] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.683636] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03 [ 0.683902] pci 0000:00:1a.0: reg 10: [mem 0xb3a19000-0xb3a193ff] [ 0.685388] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.685415] pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403 [ 0.685430] pci 0000:00:1b.0: reg 10: [mem 0xb3a10000-0xb3a13fff 64bit] [ 0.685498] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.685526] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604 [ 0.685657] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.685696] pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604 [ 0.685824] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.685869] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03 [ 0.686123] pci 0000:00:1d.0: reg 10: [mem 0xb3a18000-0xb3a183ff] [ 0.687611] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.687638] pci 0000:00:1f.0: [8086:1e57] type 0 class 0x000601 [ 0.687762] pci 0000:00:1f.2: [8086:1e03] type 0 class 0x000106 [ 0.687780] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f] [ 0.687789] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097] [ 0.687797] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087] [ 0.687806] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093] [ 0.687814] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f] [ 0.687822] pci 0000:00:1f.2: reg 24: [mem 0xb3a17000-0xb3a177ff] [ 0.687867] pci 0000:00:1f.2: PME# supported from D3hot [ 0.687885] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05 [ 0.687900] pci 0000:00:1f.3: reg 10: [mem 0xb3a15000-0xb3a150ff 64bit] [ 0.687921] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f] [ 0.687977] pci 0000:01:00.0: [10de:0de9] type 0 class 0x000300 [ 0.687987] pci 0000:01:00.0: reg 10: [mem 0xb2000000-0xb2ffffff] [ 0.687999] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.688010] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.688018] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.688025] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.695261] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.695266] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.695279] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb30fffff] [ 0.695282] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.695428] pci 0000:02:00.0: [14e4:16b5] type 0 class 0x000200 [ 0.695465] pci 0000:02:00.0: reg 10: [mem 0xb3830000-0xb383ffff 64bit pref] [ 0.695495] pci 0000:02:00.0: reg 18: [mem 0xb3840000-0xb384ffff 64bit pref] [ 0.695552] pci 0000:02:00.0: reg 30: [mem 0xfffff800-0xffffffff pref] [ 0.695659] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.695742] pci 0000:02:00.1: [14e4:16bc] type 0 class 0x000805 [ 0.695780] pci 0000:02:00.1: reg 10: [mem 0xb3800000-0xb380ffff 64bit pref] [ 0.695966] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.696033] pci 0000:02:00.2: [14e4:16be] type 0 class 0x000880 [ 0.696071] pci 0000:02:00.2: reg 10: [mem 0xb3810000-0xb381ffff 64bit pref] [ 0.696257] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold [ 0.696324] pci 0000:02:00.3: [14e4:16bf] type 0 class 0x000880 [ 0.696362] pci 0000:02:00.3: reg 10: [mem 0xb3820000-0xb382ffff 64bit pref] [ 0.696550] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.703370] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.703383] pci 0000:00:1c.0: bridge window [mem 0xb3800000-0xb38fffff 64bit pref] [ 0.703511] pci 0000:03:00.0: [14e4:4359] type 0 class 0x000280 [ 0.703542] pci 0000:03:00.0: reg 10: [mem 0xb3900000-0xb3903fff 64bit] [ 0.703708] pci 0000:03:00.0: supports D1 D2 [ 0.703710] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.711285] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.711292] pci 0000:00:1c.1: bridge window [mem 0xb3900000-0xb39fffff] [ 0.711310] pci_bus 0000:00: on NUMA node 0 [ 0.711313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.711437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.711462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.711499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.711570] \_SB_.PCI0:_OSC invalid UUID [ 0.711571] _OSC request data:1 1f 1f [ 0.711574] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.711611] \_SB_.PCI0:_OSC invalid UUID [ 0.711612] _OSC request data:1 0 1d [ 0.711615] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.711617] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.714354] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.714397] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.714437] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.714478] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.714519] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.714557] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.714597] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.714637] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.714711] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.714717] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.714720] vgaarb: loaded [ 0.714721] vgaarb: bridge control possible 0000:01:00.0 [ 0.714722] vgaarb: no bridge control possible 0000:00:02.0 [ 0.714747] PCI: Using ACPI for IRQ routing [ 0.721237] PCI: pci_cache_line_size set to 64 bytes [ 0.721428] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.721431] reserve RAM buffer: 0000000040004000 - 0000000043ffffff [ 0.721433] reserve RAM buffer: 0000000096abf000 - 0000000097ffffff [ 0.721435] reserve RAM buffer: 0000000097000000 - 0000000097ffffff [ 0.721437] reserve RAM buffer: 000000015f600000 - 000000015fffffff [ 0.721515] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.721520] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.724534] Switching to clocksource hpet [ 0.725702] pnp: PnP ACPI init [ 0.725711] ACPI: bus type pnp registered [ 0.725942] pnp 00:00: [bus 00-fe] [ 0.725944] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.725945] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.725947] pnp 00:00: [io 0x0d00-0xffff window] [ 0.725949] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.725951] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.725952] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.725954] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.725955] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.725957] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.725959] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.725960] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.725962] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.725963] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.725965] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.725967] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.725968] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.725970] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.725972] pnp 00:00: [mem 0x9fa00000-0xfeafffff window] [ 0.725973] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.726010] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.726023] pnp 00:01: [io 0x0060] [ 0.726025] pnp 00:01: [io 0x0064] [ 0.726034] pnp 00:01: [irq 1] [ 0.726050] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.726080] pnp 00:02: [irq 12] [ 0.726097] pnp 00:02: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.726133] pnp 00:03: [io 0x0000-0x001f] [ 0.726135] pnp 00:03: [io 0x0081-0x0091] [ 0.726136] pnp 00:03: [io 0x0093-0x009f] [ 0.726137] pnp 00:03: [io 0x00c0-0x00df] [ 0.726139] pnp 00:03: [dma 4] [ 0.726155] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.726161] pnp 00:04: [mem 0xff010000-0xffffffff] [ 0.726176] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active) [ 0.726237] pnp 00:05: [mem 0xfed00000-0xfed003ff] [ 0.726254] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.726261] pnp 00:06: [io 0x00f0] [ 0.726269] pnp 00:06: [irq 13] [ 0.726285] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.726293] pnp 00:07: [io 0x002e-0x002f] [ 0.726294] pnp 00:07: [io 0x004e-0x004f] [ 0.726295] pnp 00:07: [io 0x0061] [ 0.726297] pnp 00:07: [io 0x0063] [ 0.726298] pnp 00:07: [io 0x0065] [ 0.726299] pnp 00:07: [io 0x0067] [ 0.726300] pnp 00:07: [io 0x0068] [ 0.726302] pnp 00:07: [io 0x006c] [ 0.726303] pnp 00:07: [io 0x0070] [ 0.726304] pnp 00:07: [io 0x0080] [ 0.726305] pnp 00:07: [io 0x0092] [ 0.726307] pnp 00:07: [io 0x00b2-0x00b3] [ 0.726308] pnp 00:07: [io 0x0680-0x069f] [ 0.726309] pnp 00:07: [io 0xfd60-0xfd63] [ 0.726311] pnp 00:07: [io 0x1000-0x100f] [ 0.726312] pnp 00:07: [io 0xffff] [ 0.726313] pnp 00:07: [io 0xffff] [ 0.726315] pnp 00:07: [io 0x0400-0x0453] [ 0.726316] pnp 00:07: [io 0x0458-0x047f] [ 0.726317] pnp 00:07: [io 0x0500-0x057f] [ 0.726319] pnp 00:07: [io 0x164e-0x164f] [ 0.726352] system 00:07: [io 0x0680-0x069f] has been reserved [ 0.726355] system 00:07: [io 0xfd60-0xfd63] has been reserved [ 0.726357] system 00:07: [io 0x1000-0x100f] has been reserved [ 0.726358] system 00:07: [io 0xffff] has been reserved [ 0.726360] system 00:07: [io 0xffff] has been reserved [ 0.726362] system 00:07: [io 0x0400-0x0453] has been reserved [ 0.726364] system 00:07: [io 0x0458-0x047f] has been reserved [ 0.726366] system 00:07: [io 0x0500-0x057f] has been reserved [ 0.726368] system 00:07: [io 0x164e-0x164f] has been reserved [ 0.726370] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.726376] pnp 00:08: [io 0x0070-0x0077] [ 0.726382] pnp 00:08: [irq 8] [ 0.726399] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.726418] pnp 00:09: [io 0x0454-0x0457] [ 0.726445] system 00:09: [io 0x0454-0x0457] has been reserved [ 0.726447] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.784545] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 0.784547] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 0.784549] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 0.784550] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 0.784552] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.784553] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 0.784555] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 0.784556] pnp 00:0a: [mem 0xff000000-0xff000fff] [ 0.784557] pnp 00:0a: [mem 0xff010000-0xffffffff] [ 0.784559] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 0.784560] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff] [ 0.784596] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.784599] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.784601] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.784603] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.784605] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.784607] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.784609] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.784611] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved [ 0.784613] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved [ 0.784616] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.784618] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.784620] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.784811] pnp 00:0b: [mem 0x20000000-0x201fffff] [ 0.784813] pnp 00:0b: [mem 0x40004000-0x40004fff] [ 0.784858] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved [ 0.784860] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved [ 0.784863] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.784875] pnp: PnP ACPI: found 12 devices [ 0.784876] ACPI: ACPI bus type pnp unregistered [ 0.784878] PnPBIOS: Disabled by ACPI PNP [ 0.821350] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.821353] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref] [ 0.821357] PCI: max bus depth: 1 pci_try_num: 2 [ 0.821392] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff] [ 0.821395] pci 0000:01:00.0: BAR 6: assigned [mem 0xb3000000-0xb307ffff pref] [ 0.821397] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.821400] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.821402] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb30fffff] [ 0.821405] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.821410] pci 0000:02:00.0: BAR 6: assigned [mem 0xb3850000-0xb38507ff pref] [ 0.821411] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.821418] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff] [ 0.821424] pci 0000:00:1c.0: bridge window [mem 0xb3800000-0xb38fffff 64bit pref] [ 0.821432] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.821439] pci 0000:00:1c.1: bridge window [mem 0xb3900000-0xb39fffff] [ 0.821459] pci 0000:00:01.0: setting latency timer to 64 [ 0.821470] pci 0000:00:1c.0: setting latency timer to 64 [ 0.821480] pci 0000:00:1c.1: setting latency timer to 64 [ 0.821484] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.821486] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.821488] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.821490] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.821492] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.821493] pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb30fffff] [ 0.821495] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.821497] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fbfffff] [ 0.821499] pci_bus 0000:02: resource 2 [mem 0xb3800000-0xb38fffff 64bit pref] [ 0.821501] pci_bus 0000:03: resource 1 [mem 0xb3900000-0xb39fffff] [ 0.821553] NET: Registered protocol family 2 [ 0.821602] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.821752] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.821947] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.822047] TCP: Hash tables configured (established 131072 bind 65536) [ 0.822049] TCP reno registered [ 0.822051] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.822056] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.822130] NET: Registered protocol family 1 [ 0.822140] pci 0000:00:02.0: Boot video device [ 0.852492] PCI: CLS 64 bytes, default 64 [ 0.852525] Unpacking initramfs... [ 1.085690] Freeing initrd memory: 10468k freed [ 1.086886] Simple Boot Flag at 0x44 set to 0x1 [ 1.087274] audit: initializing netlink socket (disabled) [ 1.087282] type=2000 audit(1352220832.920:1): initialized [ 1.099635] highmem bounce pool size: 64 pages [ 1.099639] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.100375] VFS: Disk quotas dquot_6.5.2 [ 1.100402] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.100457] msgmni has been set to 1674 [ 1.100596] alg: No test for stdrng (krng) [ 1.100624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.100627] io scheduler noop registered [ 1.100628] io scheduler deadline registered [ 1.100645] io scheduler cfq registered (default) [ 1.100702] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.100725] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.100913] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.100931] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.100933] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.101196] intel_idle: does not run on family 6 model 58 [ 1.101215] ERST: Table is not found! [ 1.101217] GHES: HEST is not enabled! [ 1.101225] isapnp: Scanning for PnP cards... [ 1.459115] isapnp: No Plug & Play device found [ 1.459164] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.459937] Linux agpgart interface v0.103 [ 1.460025] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset [ 1.460084] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.460953] agpgart-intel 0000:00:00.0: detected 131072K stolen memory [ 1.461058] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 1.461171] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.474153] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.474158] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.474257] mousedev: PS/2 mouse device common for all mice [ 1.474285] rtc_cmos 00:08: RTC can wake from S4 [ 1.474401] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.474435] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.474444] cpuidle: using governor ladder [ 1.474446] cpuidle: using governor menu [ 1.474647] TCP cubic registered [ 1.474692] NET: Registered protocol family 10 [ 1.475007] Mobile IPv6 [ 1.475009] NET: Registered protocol family 17 [ 1.475012] Registering the dns_resolver key type [ 1.475028] Using IPI No-Shortcut mode [ 1.475108] PM: Hibernation image not present or could not be loaded. [ 1.475115] registered taskstats version 1 [ 1.475896] rtc_cmos 00:08: setting system clock to 2012-11-06 16:53:54 UTC (1352220834) [ 1.475941] Initializing network drop monitor service [ 1.476005] Freeing unused kernel memory: 416k freed [ 1.476083] Write protecting the kernel text: 2844k [ 1.476106] Write protecting the kernel read-only data: 1092k [ 1.476107] NX-protecting the kernel data: 3300k [ 1.484361] udevd[58]: starting version 175 [ 1.486009] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.508339] SCSI subsystem initialized [ 1.514292] usbcore: registered new interface driver usbfs [ 1.514314] usbcore: registered new interface driver hub [ 1.518530] tg3.c:v3.121 (November 2, 2011) [ 1.518596] tg3 0000:02:00.0: setting latency timer to 64 [ 1.525788] usbcore: registered new device driver usb [ 1.526190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.526242] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.526248] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.526270] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.526302] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.530178] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.530720] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb3a19000 [ 1.531122] sdhci: Secure Digital Host Controller Interface driver [ 1.531124] sdhci: Copyright(c) Pierre Ossman [ 1.533414] libata version 3.00 loaded. [ 1.543572] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.543593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.543596] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.543598] usb usb1: Product: EHCI Host Controller [ 1.543599] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd [ 1.543601] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.543701] hub 1-0:1.0: USB hub found [ 1.543705] hub 1-0:1.0: 2 ports detected [ 1.543846] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.543850] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.543856] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.543914] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.544832] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:09:7c:1e [ 1.544836] tg3 0000:02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.544839] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.544841] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.545001] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 1.545060] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems. [ 1.545207] sdhci-pci 0000:02:00.1: setting latency timer to 64 [ 1.545230] mmc0: no vmmc regulator found [ 1.545297] Registered led device: mmc0:: [ 1.546384] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA [ 1.547789] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.547805] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb3a18000 [ 1.563458] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.563477] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.563479] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.563481] usb usb2: Product: EHCI Host Controller [ 1.563482] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd [ 1.563484] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.563572] hub 2-0:1.0: USB hub found [ 1.563575] hub 2-0:1.0: 2 ports detected [ 1.563663] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.563668] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.563677] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.563775] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.563792] xhci_hcd 0000:00:14.0: irq 21, io mem 0xb3a00000 [ 1.563811] xhci_hcd 0000:00:14.0: Failed to enable MSI-X [ 1.563907] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X [ 1.563960] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.563962] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.563965] usb usb3: Product: xHCI Host Controller [ 1.563967] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae xhci_hcd [ 1.563969] usb usb3: SerialNumber: 0000:00:14.0 [ 1.564055] xHCI xhci_add_endpoint called for root hub [ 1.564058] xHCI xhci_check_bandwidth called for root hub [ 1.564090] hub 3-0:1.0: USB hub found [ 1.564098] hub 3-0:1.0: 4 ports detected [ 1.564163] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.564170] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.564190] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.564193] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.564196] usb usb4: Product: xHCI Host Controller [ 1.564198] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae xhci_hcd [ 1.564200] usb usb4: SerialNumber: 0000:00:14.0 [ 1.564425] xHCI xhci_add_endpoint called for root hub [ 1.564427] xHCI xhci_check_bandwidth called for root hub [ 1.564448] hub 4-0:1.0: USB hub found [ 1.564457] hub 4-0:1.0: 4 ports detected [ 1.587426] ahci 0000:00:1f.2: version 3.0 [ 1.587481] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.587504] ahci: SSS flag set, parallel bus scan disabled [ 1.605283] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.605287] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.605294] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.611733] scsi0 : ahci [ 1.612692] scsi1 : ahci [ 1.612750] scsi2 : ahci [ 1.612801] scsi3 : ahci [ 1.612852] scsi4 : ahci [ 1.612903] scsi5 : ahci [ 1.612982] ata1: SATA max UDMA/133 abar m2048@0xb3a17000 port 0xb3a17100 irq 42 [ 1.612984] ata2: DUMMY [ 1.612986] ata3: SATA max UDMA/133 abar m2048@0xb3a17000 port 0xb3a17200 irq 42 [ 1.612988] ata4: DUMMY [ 1.612989] ata5: DUMMY [ 1.612990] ata6: DUMMY [ 1.855079] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.930989] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.985754] ata1.00: ATA-8: TOSHIBA MK1059GSMP, GU001J, max UDMA/100 [ 1.985760] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.986634] ata1.00: configured for UDMA/100 [ 1.986744] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1059GS GU00 PQ: 0 ANSI: 5 [ 1.987294] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.987299] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.987434] hub 1-1:1.0: USB hub found [ 1.987533] hub 1-1:1.0: 6 ports detected [ 2.082799] Refined TSC clocksource calibration: 2494.366 MHz. [ 2.082803] Switching to clocksource tsc [ 2.098751] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.230973] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.230978] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.231128] hub 2-1:1.0: USB hub found [ 2.231215] hub 2-1:1.0: 8 ports detected [ 2.302510] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.303999] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133 [ 2.305095] ata3.00: configured for UDMA/133 [ 2.308531] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.00 PQ: 0 ANSI: 5 [ 2.311777] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.311780] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.311828] sd 0:0:0:0: [sda] Write Protect is off [ 2.311831] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.311852] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.314148] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.314153] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.314247] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.398367] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 2.417919] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep [ 2.419122] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep [ 2.420051] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep [ 2.420137] usb 3-1: New USB device found, idVendor=046d, idProduct=c062 [ 2.420142] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.420146] usb 3-1: Product: USB Laser Mouse [ 2.420158] usb 3-1: Manufacturer: Logitech [ 2.420225] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.465262] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 2.465662] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.467652] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.467694] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.470409] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input1 [ 2.470466] generic-usb 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-1/input0 [ 2.470479] usbcore: registered new interface driver usbhid [ 2.470480] usbhid: USB HID core driver [ 2.586142] usb 3-3: new high-speed USB device number 3 using xhci_hcd [ 2.602502] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep [ 2.602617] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep [ 2.602729] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep [ 2.602884] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep [ 2.602896] usb 3-3: New USB device found, idVendor=1058, idProduct=071a [ 2.602900] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.602913] usb 3-3: Product: My Passport 071A [ 2.602915] usb 3-3: Manufacturer: Western Digital [ 2.602917] usb 3-3: SerialNumber: 575834314535304436303937 [ 2.602989] usb 3-3: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 2.602995] usb 3-3: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 2.604441] usbcore: registered new interface driver uas [ 2.605070] Initializing USB Mass Storage driver... [ 2.605133] scsi6 : usb-storage 3-3:1.0 [ 2.605193] usbcore: registered new interface driver usb-storage [ 2.605194] USB Mass Storage support registered. [ 2.674165] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd [ 2.769273] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e046 [ 2.769280] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.769294] usb 1-1.1: Product: BCM20702A0 [ 2.769295] usb 1-1.1: Manufacturer: Broadcom Corp [ 2.769297] usb 1-1.1: SerialNumber: 08EDB9F75884 [ 2.841936] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd [ 3.000472] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2c18 [ 3.000479] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.000492] usb 1-1.3: Product: HD Webcam [ 3.000493] usb 1-1.3: Manufacturer: NC.21411.0022150D7B6LM0007 [ 3.602869] scsi 6:0:0:0: Direct-Access WD My Passport 071A 2011 PQ: 0 ANSI: 4 [ 3.604763] scsi 6:0:0:1: Enclosure WD SES Device 2011 PQ: 0 ANSI: 4 [ 3.605149] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.605295] scsi 6:0:0:1: Attached scsi generic sg3 type 13 [ 3.605815] sd 6:0:0:0: [sdb] 976717824 512-byte logical blocks: (500 GB/465 GiB) [ 3.607493] sd 6:0:0:0: [sdb] Write Protect is off [ 3.607496] sd 6:0:0:0: [sdb] Mode Sense: 2b 00 10 08 [ 3.609189] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.609260] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.613233] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.613299] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.910601] sdb: sdb1 [ 3.916489] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.916541] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.916595] sd 6:0:0:0: [sdb] Attached SCSI disk

[Gikiam]

Suite:

[ 4.015333] ses 6:0:0:1: Attached Enclosure device [ 4.298635] device-mapper: uevent: version 1.0.3 [ 4.298681] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 4.410725] PM: Starting manual resume from disk [ 4.410728] PM: Hibernation image partition 8:5 present [ 4.410730] PM: Looking for hibernation image. [ 4.423716] PM: Image not found (code -22) [ 4.423718] PM: Hibernation image not present or could not be loaded. [ 4.430243] EXT4-fs (sda9): INFO: recovery required on readonly filesystem [ 4.430246] EXT4-fs (sda9): write access will be enabled during recovery [ 4.468293] EXT4-fs (sda9): orphan cleanup on readonly fs [ 4.507286] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1212306 [ 4.536695] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 536847 [ 4.564795] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 932263 [ 4.582022] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 3027 [ 4.611268] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1199103 [ 4.626439] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1212301 [ 4.653282] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1055461 [ 4.653619] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1055362 [ 4.653716] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1055358 [ 4.658154] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 933309 [ 4.684747] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 933262 [ 4.684759] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 933255 [ 4.684771] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 933251 [ 4.701663] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 954115 [ 4.701961] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 932885 [ 4.720613] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931158 [ 4.720913] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931104 [ 4.720923] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931103 [ 4.721150] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931099 [ 4.721160] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931098 [ 4.721169] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931095 [ 4.721179] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931094 [ 4.721188] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931093 [ 4.721196] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931092 [ 4.721205] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931090 [ 4.721214] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931086 [ 4.721223] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931084 [ 4.721231] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931082 [ 4.721243] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931079 [ 4.721252] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931078 [ 4.721262] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931075 [ 4.721270] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931074 [ 4.721279] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931073 [ 4.721287] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931071 [ 4.721296] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931070 [ 4.721306] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931068 [ 4.721315] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931065 [ 4.721323] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 931064 [ 4.729062] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930567 [ 4.744879] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930210 [ 4.744910] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930195 [ 4.744920] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930198 [ 4.744941] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930188 [ 4.745074] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930194 [ 4.745083] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930192 [ 4.745099] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930197 [ 4.745108] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930196 [ 4.745118] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930208 [ 4.745129] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930186 [ 4.745138] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930227 [ 4.745147] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930183 [ 4.745157] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930189 [ 4.745167] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930184 [ 4.745177] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930203 [ 4.745186] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930228 [ 4.745201] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930205 [ 4.745209] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930187 [ 4.745219] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930200 [ 4.745228] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 930185 [ 4.762008] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 929244 [ 4.771338] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 929246 [ 4.788086] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 928156 [ 4.792006] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 927652 [ 4.828024] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 410059 [ 4.828061] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 928008 [ 4.828075] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 928000 [ 4.828089] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 927998 [ 4.853944] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 927996 [ 4.853957] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1055318 [ 4.865453] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 933122 [ 4.865695] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 933121 [ 4.865722] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 933120 [ 4.865734] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 933119 [ 4.865743] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 410058 [ 4.865752] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 410057 [ 4.890417] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 959420 [ 4.904118] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 926408 [ 4.916723] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 925160 [ 4.916975] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 925158 [ 4.930625] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 946597 [ 4.930652] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 946596 [ 4.930660] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 946595 [ 4.930669] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 946594 [ 4.930678] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 946593 [ 4.930687] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 946592 [ 4.930696] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 410056 [ 4.930875] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 409976 [ 4.960799] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 399952 [ 4.961031] EXT4-fs (sda9): 88 orphan inodes deleted [ 4.961033] EXT4-fs (sda9): recovery complete [ 5.088618] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 7.089894] udevd[395]: starting version 175 [ 8.154188] wmi: Mapper loaded [ 8.229704] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2 [ 8.229711] ACPI: Power Button [PWRB] [ 8.229773] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input3 [ 8.229813] ACPI: Lid Switch [LID0] [ 8.229851] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4 [ 8.229854] ACPI: Sleep Button [SLPB] [ 8.229896] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 8.229899] ACPI: Power Button [PWRF] [ 8.231994] ACPI: Requesting acpi_cpufreq [ 8.232350] Monitor-Mwait will be used to enter C-1 state [ 8.232359] Monitor-Mwait will be used to enter C-2 state [ 8.232366] Monitor-Mwait will be used to enter C-3 state [ 8.232382] ACPI: acpi_idle registered with cpuidle [ 8.302401] lib80211: common routines for IEEE802.11 drivers [ 8.302404] lib80211_crypt: registered algorithm 'NULL' [ 8.585572] wl: module license 'MIXED/Proprietary' taints kernel. [ 8.585575] Disabling lock debugging due to kernel taint [ 8.591935] wl 0000:03:00.0: setting latency timer to 64 [ 8.634895] lib80211_crypt: registered algorithm 'TKIP' [ 8.642755] ACPI: resource 0000:00:1f.3 [io 0x3040-0x305f] conflicts with ACPI region SMBI [io 0x3040-0x304f] [ 8.642761] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.655353] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 8.666402] iTCO_vendor_support: vendor-support=0 [ 8.926122] ACPI: Battery Slot [BAT1] (battery present) [ 8.926237] ACPI: AC Adapter [ACAD] (off-line) [ 8.926689] wlan0: Broadcom BCM4359 802.11 Hybrid Wireless Controller 5.100.82.112 [ 8.949417] acer_wmi: Acer Laptop ACPI-WMI Extras [ 8.949431] acer_wmi: Function bitmap for Communication Button: 0x801 [ 8.991052] input: Acer WMI hotkeys as /devices/virtual/input/input7 [ 8.993049] acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0 [ 8.994892] acer_wmi: Get 0x800 Device Status failed: 0xe2 - 0x0 [ 8.996649] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0 [ 9.005947] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 9.006024] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 9.006232] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.155847] [drm] Initialized drm 1.1.0 20060810 [ 9.280761] i915 0000:00:02.0: setting latency timer to 64 [ 9.294459] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 9.294464] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.294465] [drm] Driver supports precise vblank timestamp query. [ 9.294530] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 9.294978] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 9.294980] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 9.385468] [drm] failed to retrieve link info, disabling eDP [ 9.392123] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f01) [ 9.446762] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x18, 0x0b. [ 9.600646] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8 [ 9.695627] Linux media interface: v0.10 [ 9.703497] Linux video capture interface: v2.00 [ 9.708620] uvcvideo: Found UVC 1.00 device HD Webcam (1bcf:2c18) [ 9.717366] input: HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9 [ 9.717444] usbcore: registered new interface driver uvcvideo [ 9.717446] USB Video Class driver (1.1.1) [ 9.764226] Bluetooth: Core ver 2.16 [ 9.764240] NET: Registered protocol family 31 [ 9.764241] Bluetooth: HCI device and connection manager initialized [ 9.764243] Bluetooth: HCI socket layer initialized [ 9.764244] Bluetooth: L2CAP socket layer initialized [ 9.764247] Bluetooth: SCO socket layer initialized [ 9.787289] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 9.787468] usbcore: registered new interface driver btusb [ 9.950334] fbcon: inteldrmfb (fb0) is primary device [ 10.179559] Console: switching to colour frame buffer device 170x48 [ 10.186396] fb0: inteldrmfb frame buffer device [ 10.186399] drm: registered panic notifier [ 10.186670] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 10.187007] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input10 [ 10.187053] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 10.187855] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11 [ 10.187891] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.187952] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.188045] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 10.188070] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 10.856692] hda_codec: ALC269: SKU not ready 0x598301f0 [ 10.858578] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12 [ 10.958926] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 10.959053] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 10.959166] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 10.959211] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 12.926267] Adding 1023996k swap on /dev/sda5. Priority:-1 extents:1 across:1023996k [ 12.946909] EXT4-fs (sda9): re-mounted. Opts: (null) [ 13.259378] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro [ 13.445840] loop: module loaded [ 20.373648] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 21.508723] RPC: Registered named UNIX socket transport module. [ 21.508728] RPC: Registered udp transport module. [ 21.508731] RPC: Registered tcp transport module. [ 21.508734] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.582173] FS-Cache: Loaded [ 21.636879] FS-Cache: Netfs 'nfs' registered for caching [ 21.658112] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 24.458614] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16 [ 26.649362] Bluetooth: RFCOMM TTY layer initialized [ 26.649369] Bluetooth: RFCOMM socket layer initialized [ 26.649371] Bluetooth: RFCOMM ver 1.11 [ 27.071354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.071359] Bluetooth: BNEP filters: protocol multicast [ 27.851239] bbswitch: version 0.4.2 [ 27.851245] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 27.851251] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 27.851309] bbswitch: detected an Optimus _DSM function [ 27.851313] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 27.852743] bbswitch: disabling discrete graphics [ 27.852864] bbswitch: Result of Optimus _DSM call: 11000059 [ 27.865756] pci 0000:01:00.0: Refused to change power state, currently in D0 [ 27.866319] pci 0000:01:00.0: power state changed by ACPI to D3 [ 28.010474] lp: driver loaded but no devices found [ 28.338044] ppdev: user-space parallel port driver [ 29.540003] tg3 0000:02:00.0: irq 45 for MSI/MSI-X [ 29.540015] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [ 29.540025] tg3 0000:02:00.0: irq 47 for MSI/MSI-X [ 29.540034] tg3 0000:02:00.0: irq 48 for MSI/MSI-X [ 29.540043] tg3 0000:02:00.0: irq 49 for MSI/MSI-X [ 29.730187] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.330731] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 31.330734] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 31.330737] tg3 0000:02:00.0: eth0: EEE is disabled [ 31.330829] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.633326] Ebtables v2.0 registered [ 32.471084] ip_tables: (C) 2000-2006 Netfilter Core Team [ 32.789858] ip6_tables: (C) 2000-2006 Netfilter Core Team

sda9 est ma partition système, et sda7 ma partition /home.
Merci beaucoup!

[fluo]

[    4.507286] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1212306
[    4.536695] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 536847
[    4.564795] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 932263
[    4.582022] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 3027
[    4.611268] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1199103

=> tente un fsck sur les partitions suspectes en mode rescue (les partitions doivent être démontées avant d’utiliser fsck)

Je pense aussi qu’une vérification du disque avec smart est utile.

[Clochette]

[quote=“fluo”] [ 4.507286] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1212306 [ 4.536695] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 536847 [ 4.564795] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 932263 [ 4.582022] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 3027 [ 4.611268] EXT4-fs (sda9): ext4_orphan_cleanup: deleting unreferenced inode 1199103
=> tente un fsck sur les partitions suspectes en mode rescue (les partitions doivent être démontées avant d’utiliser fsck)

Je pense aussi qu’une vérification du disque avec smart est utile.[/quote]

Autant recommandé d’utiliser un SysrecueCD afin de faire tous ces tests proprement avec des outils en version éprouvés

[Gikiam]

Excusez mon inactivité.
Ces erreurs sont sur ma partition système, et ne surviennent qu’après un freeze. Le démarrage suivant semble les corriger d’après ce que l’on voit sur les sorties.
J’ai tenté ces commandes sur cette partition et elles n’ont rien trouvé de spécial.
Je me demande si cela ne pourrait pas venir d’optimus, intégré dans ma configuration. J’ai trouvé quelqu’un qui a le même problème, et il possède aussi optimus.
Je gère le problème d’optimus avec Bumblebee, mais des freezes parvenaient aussi avant son installation.
Vous avez des idées?
Merci

[EDIT] Formulation

[Dunatotatos]

Salut Gikiam

Pour info, j’ai exactement le même problème. Les mises à jour du démon bumblebee et des pilotes graphiques tendent à réduire la fréquence des freezes. (Sauf si c’est un effet placébo).

Quoiqu’il en soit, le freeze n’a jamais lieu en mode console. J’ai donc tendance à incriminer les pilotes graphiques. J’ai tenté de n’installer que les pilotes du chipset, sans les pilotes de la carte ni Bumblebee, mais les freezes ont tout de même lieu.

Bref, ma contribution n’est pas folle, mais c’est toujours ça ^^

Lien vers le sujet que j’avais créé à cause de ce problème : diagnostiquer-un-crash-t40574.html

[boulate]

Est ce que tu as juste un freeze du serveur X (qui parfois peut t’empêcher également de passer sous les TTY) ou c’est tout le PC qui plante?

Pour savoir moi je laisse tourner un petit serveur SSH et j’essaye de me connecter depuis un autre poste quand le freeze survient.

Il m’est arrivé plusieurs fois au boulot d’avoir un PC qui semblait totalement bloqué mais qui me laissait encore la main via SSH.
Ca te permet de voir si un service utilise toutes les ressources, de voir tes logs en direct etc.

[Dunatotatos]

C’était un espoir que j’avais… Mais la machine est bien tout entièrement plantée. Elle ne répond même plus au ping.

[Gikiam]

En cherchant un peu plus profondément sur internet, j’ai trouvé quelques posts affirmant que le problème n’existait plus pour des versions plus récentes du noyau. J’ai donc compilé et installé un noyau 3.6.9. Pour le moment le freeze n’intervient plus, mais je ne peux plus compiler mes drivers wifi broadcom (problème de headers?). Je ferme ce post (problème initial résolu) et je continue à chercher.

[Dunatotatos]

Pour info, tu n’étais pas obligé de compiler ton noyau. Une version “trunk” est dispo dans les dépôt experimental :

dunatotatos@PC-Duna:~$ apt-cache policy linux-image-3.6-trunk-amd64 linux-image-3.6-trunk-amd64: Installé : 3.6.9-1~experimental.1 Candidat : 3.6.9-1~experimental.1 Table de version : *** 3.6.9-1~experimental.1 0 1 ftp://ftp.fr.debian.org/debian/ experimental/main amd64 Packages 100 /var/lib/dpkg/status

Et pour compiler tes nouveaux drivers, installe bien linux-headers-3.6-trunk-amd64