Abandon::aspire one debian/sid atheros 5001

Support Debian
#1

bonjour,

je me suis lancé dans l’installation de debian squeeze/sid sur mon apsire one A110/ssd8Gb/1.5GRam.

j’ai un soucis avec la carte wifi, peut etre pourriez vous m’aidez. autant dire que j’arrive a rien…

voila de la lecture :

root@onekul:/# uname -a Linux onekul 2.6.38-1-686 #1 SMP Wed Mar 16 17:37:47 UTC 2011 i686 GNU/Linux

root@onekul:/# lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev ff)

[code]root@onekul:/# dmidecode

dmidecode 2.9

SMBIOS 2.4 present.
32 structures occupying 1595 bytes.
Table at 0x000E8E70.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Acer
Version: v0.3114
Release Date: 05/09/2008
ROM Size: 1024 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
8042 keyboard services are supported (int 9h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
Targeted content distribution is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Acer
Product Name: AOA110
Version: 1
Serial Number: LUS030A0738331E8B82536
UUID: 4016CD6F-A86C-DD11-BD75-001E68C97BC5
Wake-up Type: Power Switch
SKU Number: Napa_Fab5
Family: Intel_Mobile

Handle 0x0002, DMI type 2, 16 bytes
Base Board Information
Manufacturer: Acer
Product Name:
Version: Base Board Version
Serial Number: Base Board Serial Number
Asset Tag: Base Board Asset Tag
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Base Board Chassis Location
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer: Chassis Manufacturer
Type: Other
Lock: Not Present
Version: Chassis Version
Serial Number: Chassis Serial Number
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0

Handle 0x0004, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 4096 MB
Supported Speeds:
Other
Supported Memory Types:
Other
Memory Module Voltage: Unknown
Associated Memory Slots: 2
0x0000
0x0000
Enabled Error Correcting Capabilities:
None

Handle 0x0005, DMI type 9, 13 bytes
System Slot Information
Designation: J7
Type: x1 PCI Express
Current Usage: Available
Length: Other
ID: 0
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x0006, DMI type 11, 5 bytes
OEM Strings
String 1: String1 for Original Equipment Manufacturer
String 2: String2 for Original Equipment Manufacturer
String 3: String3 for Original Equipment Manufacturer
String 4: String4 for Original Equipment Manufacturer
String 5: String5 for Original Equipment Manufacturer

Handle 0x0007, DMI type 12, 5 bytes
System Configuration Options
Option 1: String1 for Type12 Equipment Manufacturer
Option 2: String2 for Type12 Equipment Manufacturer
Option 3: String3 for Type12 Equipment Manufacturer
Option 4: String4 for Type12 Equipment Manufacturer

Handle 0x0008, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 4

Handle 0x0009, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected

Handle 0x000A, DMI type 129, 5 bytes
OEM-specific Type
Header and Data:
81 05 0A 00 4F
Strings:
em Test 1
Oem Test 2

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J20
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J22
Internal Connector Type: None
External Reference Designator: Mouse
External Connector Type: PS/2
Port Type: Mouse Port

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9
Internal Connector Type: None
External Reference Designator: SD Card Slot
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J14
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J16
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J18
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8
Internal Connector Type: None
External Reference Designator: Network
External Connector Type: RJ-45
Port Type: Network Port

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: U11
Internal Connector Type: On Board IDE
External Reference Designator: OnBoard Primary IDE
External Connector Type: None
Port Type: Other

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J5
Internal Connector Type: None
External Reference Designator: CRT
External Connector Type: DB-15 female
Port Type: Video Port

Handle 0x0014, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2

Handle 0x0015, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: J2
Bank Connections: 0 0
Current Speed: 1 ns
Type: DIMM
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK

Handle 0x0016, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: J2
Bank Locator: CHAN A DIMM 0
Type: DDR2
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: 0xAD00000000000000
Serial Number: 0x00000000
Asset Tag: Unknown
Part Number: 0x48594D503136345336344350362D59352020

Handle 0x0017, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0016
Memory Array Mapped Address Handle: 0x001B
Partition Row Position: 1

Handle 0x0018, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: J6H2
Bank Connections: 0 0
Current Speed: 1 ns
Type: DIMM
Installed Size: 1024 MB (Single-bank Connection)
Enabled Size: 1024 MB (Single-bank Connection)
Error Status: OK

Handle 0x0019, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: J6H2
Bank Locator: CHAN A DIMM 1
Type: DDR2
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: 0x7F98000000000000
Serial Number: 0x773C3D8D
Asset Tag: Unknown
Part Number: 0x202020202020202020202020202020202020

Handle 0x001A, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0005FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0019
Memory Array Mapped Address Handle: 0x001B
Partition Row Position: 1

Handle 0x001B, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0005FFFFFFF
Range Size: 1536 MB
Physical Array Handle: 0x0014
Partition Width: 0

Handle 0x001C, DMI type 4, 35 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Pentium M
Manufacturer: Intel® Corporation
ID: C2 06 01 00 FF FB E9 BF
Signature: Type 0, Family 6, Model 28, Stepping 2
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel® Atom™ CPU N270 @ 1.60GHz
Voltage: 1.6 V
External Clock: 533 MHz
Max Speed: 1600 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x001E
L2 Cache Handle: 0x001D
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: FFFF
Part Number: Not Specified

Handle 0x001D, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative

Handle 0x001E, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Instruction
Associativity: 8-way Set-associative

Handle 0x001F, DMI type 127, 4 bytes
End Of Table
[/code]

[code]root@onekul:/# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:c9:7b:c5
inet adr:192.168.0.13 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: 2a01:e35:2eb0:f310:21e:68ff:fec9:7bc5/64 Scope:Global
adr inet6: fe80::21e:68ff:fec9:7bc5/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7613 errors:0 dropped:0 overruns:0 frame:0
TX packets:5369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:9514761 (9.0 MiB) TX bytes:641461 (626.4 KiB)
Interruption:44 Adresse de base:0xa000

lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:2056 (2.0 KiB) TX bytes:2056 (2.0 KiB)
[/code]

[code]root@onekul:/# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
[/code]
[/code]# This file describes the network interfaces available on your system

and how to activate them. For more information, see interfaces(5).

The loopback network interface

auto lo
iface lo inet loopback
[/code]

[code]root@onekul:/# cat /etc/modules

/etc/modules: kernel modules to load at boot time.

This file contains the names of kernel modules that should be loaded

at boot time, one per line. Lines beginning with “#” are ignored.

Parameters can be specified after the module name.

loop
ath5k
[/code]

[code]root@onekul:/# cat /etc/rc.local
#!/bin/sh -e

rc.local

This script is executed at the end of each multiuser runlevel.

Make sure that the script will “exit 0” on success or any other

value on error.

In order to enable or disable this script just change the execution

bits.

#

By default this script does nothing.

ifconfig wlan0 up &
exit 0
[/code]
paquet installés :
wicd wpa-supplicant wireless-tools et headers ok

N’hesitez pas a demander si il y a besoin d’autre renseignement.
a savoir que je ne veux pas d’ip fixe/wireless puisque je bouge très souvent.

#2

Bonjour,

[quote=“sakul”]root@onekul:/# lspci 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev ff) [/quote]
Voir dans wiki.debian.org —> Atheros AR5xxx devices (MadWifi).

A+

#3

merci pour la reponse.

j’ai deja lu cette page. il est indiqué que depuis lenny et superieur madwifi a été enlevé des depots. Je suis en squeez/sid.
il est dit d’utiliser “ath5k”. ce que je fait. mais cela ne marche pas…
que faire

[quote=debian.wiki]Squeeze

The MadWifi driver and associated tools were removed from Debian (see Debian bug 519446). Use the ath5k or ath9k (802.11n) drivers instead. [/quote]

#4

up.

#5

Ta carte est reconnue sous wlan0. Le problème est ailleurs : droits, wicd, /etc/network/interfaces, association de la box…

wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

Pour commencer est tu bien dans le groupe net-dev?

#6

As-tu vérifier que ton module était installé, n’y aurait-il pas un autre module à blacklister ( qui pourrait rentrer en conflit ) , désolé je n’ai que ça comme idée je ne connais pas ce genre de module wifi.

En tout cas ton module ne parait pas charger a ce que je vois :think:

#7

si je peux me permettre,
j’ai offert un aspire one à mon épouse, sauf que la machine a un disque dur, et ce n’est pas la même carte: BCM4313 chez moi.
Mais j’ai eu un problème au début:
je voyais bien la carte, avec lspci, mais impossible d’obtenir un quelconque signal, jusqu’au moment ou, croyant à un problème de carte (maichine d’occasion…) j’ai trouvé!
En fait, il faut parfois activer la carte avec une des touches du clavier! c’est bête, mais y a tu pensé? Et sur certaine machine, il y a des soucis avec le pavé tactile: il faut désactiver celui-ci, activer la carte wifi, puis réactiver lr pavé tactile! je sais, c’est con, mais ça a marché chez moi!
Après, as tu testé un un iwlist wlan0 scan pour tester?

Sinon, ath5k fonctionne avec le dernier noyau sous testing, je l’utilise pour une de mes cartes wifi (machine de bureau).

Cordialement.

#8

salut,
merci pour les réponses.
Mon USER est bien dans le groupe NETDEV.
concernant les modules :

j’ai bien purgé madwifi + blacklist ath_pci. Puis j’ai ajouté ath5k dans /etc/modules.

je vois bien ma carte.

[code]wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

[/code]

Mais je n’ai aucune possibilité avec wicd --> Aucun resaux sans fil detecté.
Un iwlist scan me rend :

[code]root@onekul:/# iwlist scan
lo Interface doesn’t support scanning.

eth0 Interface doesn’t support scanning.

wlan0 Interface doesn’t support scanning : Network is down

root@onekul:/#
[/code]
logiquement je lance alors :

root@onekul:/# ifconfig wlan0 up SIOCSIFFLAGS: Erreur d'entrée/sortie root@onekul:/# ifup wlan0 Ignoring unknown interface wlan0=wlan0.

Je suis donc coincé ici par mes connaissances.

#9

le ‘Ignoring unknown …’ c’est juste pour dire que tu n’as pas configuré wlan0 ans /etc/network/interfaces c’est pas grave en soit.
Perso, j’ai laissé tombé wicid et autre network-manager. Je configure wpa-suplicant et interfaces à la main. Je n’ai qu’a rajouter un réseau dans /etc/wpa_supplicant/wpa_supplicant.conf pour faire fonctionner un nouveau réseau. Démonstration chez moi:

$ cat /etc/network/interfaces 
auto lo wlan0
iface lo inet loopback

allow-hotplug wlan0
iface wlan0 inet manual
  wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf

iface maison inet dhcp

la, c’est juste pour lui dire de choisir le réseau ‘maison’ (oui, je sais, le nom n’est pas très original… :blush: )

$ cat /etc/wpa_supplicant/wpa_supplicant.conf 
ctrl_interface=/var/run/wpa_supplicant
ap_scan=1

network={
	ssid="le nom du reseau"
	scan_ssid=1
        key_mgmt=WPA-PSK
        proto=WPA
        pairwise=TKIP
        group=TKIP
	psk="le code en lettre (pas d'hexadecimal)"
	id_str="maison"
}

voila. Sur mes portables, j’ai plusieurs ‘network’ (maison, beauparent, …) et ça fonctionne tout seul
J’ai juste eu à faire un script sur une machine sous buntu pour reconnecter après hibernation, ça voulait pas le faire tout seul.
Pour ton problème, as tu regardé dans /var/log/syslog au moment ou tu charge le module ath5k ?
Tu auras peut être un peut plus d’info .
Rémi.

#10

Ca m’a bien soulé. donc j’ai opté pour la facilité. un dongle usb netgear qui traînait + U.Maverick. et puis on verra plus tard pour le reste…

merci quand même a tous.

#11

Un truc tout bête dans wicd : lui indiquer que la carte suivie est wlan0 et pas une autre.