[Abandon] Installation Driver Ati sur Thinkpad

Bonjour.

Mon laptop est équipé de deux cartes graphiques. La carte graphique “intégrée” Intel, et une carte “discrète” Ati. J’aimerais pouvoir utiliser cette dernière par nécessité d’avoir une bonne prise en charge 3D. Voilà ce que j’ai fait jusqu’alors :

  • BIOS : Choix de la carte discrète (ie l’Ati)

  • Installation de : linux-headers-xxx

  • Install de : fglrx-control fglrx-driver module-assistant

  • module-assistant prepare

  • module-assistant update

  • module-assistant a-i fglrx
    Tout ça sans erreur à l’exécution

  • aticonfig --initial

  • Vérification du choix “Ati” dans le xorg.conf

[code]******@******:/etc/X11$ more xorg.conf
Section "Files"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
Option “XkbOptions” "lv3:ralt_switch"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver “ati”

BusID “PCI:0:2:0”

EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Modes "1650x1080"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
EndSection
[/code]

Et voilà le drame… :neutral_face:

******@******:~$ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 135 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 16 Current serial number in output stream: 16

J’ai testé une appli 3D (Celestia) qui bien évidement, ne fonctionne pas.

Des idées ?

Merci d’avance :stuck_out_tongue:

Salut,
Pourrais-tu poster s’il te plaît le résultat de la commande lspci | grep VGA?
Merci d’avance.

S’pas à toi de me remercier. :slightly_smiling:

Voila :

******@******:~$ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3650

Que donne un apt-cache policy xserver-xorg-radeonhd?

Désolé, je me suis planté dans le nom du paquet, c’est xserver-xorg-video-radeonhd.

Voila :smt001

******@******:~$ apt-cache policy xserver-xorg-video-radeonhd xserver-xorg-video-radeonhd: Installé : 1.2.5-1 Candidat : 1.3.0-2 Table de version : 1.3.0-2 0 986 http://ftp.fr.debian.org squeeze/main Packages 98 http://ftp.fr.debian.org sid/main Packages *** 1.2.5-1 0 100 /var/lib/dpkg/status 1.2.1-2 0 982 http://ftp.fr.debian.org lenny/main Packages

Voyons voir ton fichier /etc/X11/xorg.conf.

Il est en premier post.

Fais voir le résultat de lsmod.

******@******:~$ lsmod Module Size Used by uinput 6376 1 ppdev 5030 0 lp 7462 0 parport 27938 2 ppdev,lp sco 7193 2 bridge 39582 0 stp 1440 1 bridge bnep 9395 2 rfcomm 29501 0 l2cap 24656 6 bnep,rfcomm crc16 1319 1 l2cap bluetooth 41795 6 sco,bnep,rfcomm,l2cap acpi_cpufreq 5555 0 cpufreq_conservative 5162 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_userspace 1992 0 xt_tcpudp 2319 93 iptable_nat 4299 1 nf_nat 13340 1 iptable_nat nf_conntrack_ipv4 9817 19 iptable_nat,nf_nat nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 xt_DSCP 1995 51 xt_TCPMSS 2919 4 ipt_LOG 4518 42 ipt_REJECT 1953 0 iptable_mangle 2817 1 iptable_filter 2258 1 xt_multiport 2267 0 xt_state 1303 16 xt_limit 1782 44 xt_conntrack 2407 0 nf_conntrack_ftp 5553 0 nf_conntrack 46359 6 iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state,xt_conntrack,nf_conntrack_ftp ip_tables 13899 3 iptable_nat,iptable_mangle,iptable_filter x_tables 12813 11 xt_tcpudp,iptable_nat,xt_DSCP,xt_TCPMSS,ipt_LOG,ipt_REJECT,xt_multiport,xt_state,xt_limit,xt_conntrack,ip_tables fuse 50078 1 coretemp 4165 0 loop 11767 0 snd_hda_codec_conexant 21789 1 arc4 1274 2 ecb 1841 2 pcmcia 19426 0 snd_hda_intel 18147 3 snd_hda_codec 54212 2 snd_hda_codec_conexant,snd_hda_intel snd_hwdep 5364 1 snd_hda_codec yenta_socket 19051 1 joydev 8411 0 rsrc_nonstatic 7294 1 yenta_socket snd_pcm_oss 32399 0 pcmcia_core 24054 3 pcmcia,yenta_socket,rsrc_nonstatic iwlagn 71452 0 iwlcore 77494 1 iwlagn snd_mixer_oss 12606 1 snd_pcm_oss mac80211 135407 2 iwlagn,iwlcore snd_pcm 60615 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss cfg80211 101253 3 iwlagn,iwlcore,mac80211 snd_timer 15502 2 snd_pcm i2c_i801 7766 0 i2c_core 15584 1 i2c_i801 snd 44718 12 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 4598 1 snd snd_page_alloc 6217 2 snd_hda_intel,snd_pcm psmouse 49521 0 thinkpad_acpi 50043 0 rfkill 12996 4 bluetooth,cfg80211,thinkpad_acpi battery 4998 0 ac 2192 0 pcspkr 1699 0 serio_raw 3752 0 nvram 5061 1 thinkpad_acpi evdev 7336 25 processor 29479 3 acpi_cpufreq wmi 4307 0 ext3 106454 2 jbd 37037 1 ext3 mbcache 4970 1 ext3 sg 18728 0 sd_mod 29673 4 crc_t10dif 1276 1 sd_mod sr_mod 12602 0 cdrom 29399 1 sr_mod ide_pci_generic 2788 0 ide_core 76802 1 ide_pci_generic uhci_hcd 18457 0 sdhci_pci 5565 0 sdhci 13966 1 sdhci_pci ata_generic 2983 0 mmc_core 45456 1 sdhci led_class 2401 3 iwlcore,thinkpad_acpi,sdhci ricoh_mmc 3069 0 video 17445 0 ahci 31494 3 output 1692 1 video ehci_hcd 30578 0 libata 131655 2 ata_generic,ahci e1000e 109871 0 button 4634 0 usbcore 121687 3 uhci_hcd,ehci_hcd nls_base 6377 1 usbcore scsi_mod 121909 4 sg,sd_mod,sr_mod,libata intel_agp 25521 0 agpgart 24733 1 intel_agp thermal 11674 0 fan 3346 0 thermal_sys 11878 4 processor,video,thermal,fan

Tu as essayé ce tutoriel (sur ce site):
viewtopic.php?f=8&t=9066&start=0&hilit=Ati

J’ai refait le tuto sans plus de succès.

******@******:~$ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 135 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 16 Current serial number in output stream: 16

Bizarre…

Merci en tout cas pour ton aide. :smt006

Je crois que je vais laisser de côté ça un petit moment. En fait j’aurais peut être besoin de la 3D dans les semaines à venir pour la réalisation d’une application en Python dans le cadre d’un devoir de simulation numérique physique.