Affichage des polices bizarre


#1

Bonjour à tous,
question d’un pauvre petit newbie:
Je viens de passer ma woody en sarge sur un portable et j’ai maintenant un probleme avec l’affichage de mes polices sous gnome…J’ai un peu tout essayé mais sans succes…Installé les truetype + essayé plein de trucs dans mon fichier de config Xfree + paramètres d’affichage sous gnome…Mes polices restent toujours un peu floue, du vert du rouge qui déborde autour des lettres, des lettres se touchent ou sont moins franches…C’est tres tres léger mais ca devient pénible…je ne sais plus trop quoi faire. D’autant + que je n’arrive pas a regler ces warnings de log.
Merci pour vos conseils.

ci-joint XFConfig-4 et log:

Section "ServerLayout"
Identifier "Default Layout"
Screen “Default Screen” 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section “Files”

# if the local font server has problems, we can fall back on these
#FontPath	"unix/:7101"
FontPath	"/usr/lib/X11/fonts/truetype"
FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath	"/usr/lib/X11/fonts/100dpi"
FontPath     "/usr/lib/X11/fonts/misc"
FontPath     "/usr/lib/X11/fonts/Type1"
FontPath     "/usr/lib/X11/fonts/Speedo"
FontPath     "/usr/lib/X11/fonts/75dpi:unscaled"
FontPath     "/usr/lib/X11/fonts/75dpi"

EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load “int10”

Load “pex5”

Load  "record"
Load  "speedo"
Load  "type1"
Load  "vbe"

Load “xie”

EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option “XkbRules” "xfree86"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
EndSection

Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option “Device” "/dev/psaux"
Option “Protocol” "ImPS/2"
Option “Emulate3Buttons” "true"
Option “ZAxisMapping” "4 5"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option “SendCoreEvents” "true"
Option “Device” "/dev/input/mice"
Option “Protocol” "ImPS/2"
Option “Emulate3Buttons” "true"
Option “ZAxisMapping” "4 5"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-60
VertRefresh 50-75
Option "DPMS"
EndSection

Section "Device"
Identifier "Carte vidéo générique"
Driver “ati”
#Option “Display” "BIOS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection
##############################################

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]
Build Date: 28 September 2004
Before reporting problems, check XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.9 (root@portable) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Wed Nov 3 17:44:49 CET 2004
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/XFree86.0.log”, Time: Tue Nov 9 12:23:06 2004
(==) Using config file: “/etc/X11/XF86Config-4”
(==) ServerLayout “Default Layout”
(
) |–>Screen “Default Screen” (0)
() | |–>Monitor “Generic Monitor”
(
) | |–>Device “Carte vidéo générique”
() |–>Input Device “Generic Keyboard”
(
) Option “XkbRules” “xfree86”
() XKB: rules: “xfree86”
(
) Option “XkbModel” “pc105”
() XKB: model: “pc105”
(
) Option “XkbLayout” “fr”
() XKB: layout: “fr”
(==) Keyboard: CustomKeycode disabled
(
) |–>Input Device “Configured Mouse”
() |–>Input Device “Generic Mouse”
(WW) `fonts.dir’ not found (or not valid) in “/usr/lib/X11/fonts/truetype”.
Entry deleted from font path.
(Run ‘mkfontdir’ on “/usr/lib/X11/fonts/truetype”).
(
) FontPath set to “/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/75dpi:unscaled,/usr/lib/X11/fonts/75dpi”
(==) RgbPath set to “/usr/X11R6/lib/X11/rgb”
(==) ModulePath set to “/usr/X11R6/lib/modules”
(–) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: “bitmap”
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: “pcidata”
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10b9,1621 card 0000,0000 rev 05 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10b9,5247 card 0000,0000 rev 01 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 10b9,5451 card 1025,1010 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:07:0: chip 10b9,1533 card 1025,1010 rev 00 class 06,01,00 hdr 00
(II) PCI: 00:0a:0: chip 8086,1229 card 1025,1010 rev 08 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 10b9,5229 card 1025,1010 rev c3 class 01,01,fa hdr 00
(II) PCI: 00:11:0: chip 10b9,7101 card 1025,1010 rev 00 class 06,80,00 hdr 00
(II) PCI: 00:13:0: chip 1217,6933 card 4001,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:13:1: chip 1217,6933 card 4801,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:14:0: chip 10b9,5237 card 1025,1010 rev 03 class 0c,03,10 hdr 00
(II) PCI: 01:00:0: chip 1002,4c4d card 1025,1010 rev 64 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00008000 - 0x00008fff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0x80600000 - 0x820fffff (0x1b00000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:19:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:19:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x11000000 - 0x113fffff (0x400000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x10c00000 - 0x10ffffff (0x400000) MX[B]
(–) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility P/M AGP 2x rev 100, Mem @ 0x81000000/24, 0x80600000/12, I/O @ 0x8000/8, BIOS @ 0x80620000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0x82400000 - 0x82400fff (0x1000) MX[B]
[1] -1 0 0x80200000 - 0x802fffff (0x100000) MX[B]
[2] -1 0 0x80100000 - 0x80100fff (0x1000) MX[B]
[3] -1 0 0x82200000 - 0x82200fff (0x1000) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0x80620000 - 0x8063ffff (0x20000) MXB
[6] -1 0 0x80600000 - 0x80600fff (0x1000) MXB
[7] -1 0 0x81000000 - 0x81ffffff (0x1000000) MXB
[8] -1 0 0x00006050 - 0x0000605f (0x10) IX[B]
[9] -1 0 0x00007000 - 0x0000703f (0x40) IX[B]
[10] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[11] -1 0 0x00008000 - 0x000080ff (0x100) IXB
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x82400000 - 0x82400fff (0x1000) MX[B]
[1] -1 0 0x80200000 - 0x802fffff (0x100000) MX[B]
[2] -1 0 0x80100000 - 0x80100fff (0x1000) MX[B]
[3] -1 0 0x82200000 - 0x82200fff (0x1000) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0x80620000 - 0x8063ffff (0x20000) MXB
[6] -1 0 0x80600000 - 0x80600fff (0x1000) MXB
[7] -1 0 0x81000000 - 0x81ffffff (0x1000000) MXB
[8] -1 0 0x00006050 - 0x0000605f (0x10) IX[B]
[9] -1 0 0x00007000 - 0x0000703f (0x40) IX[B]
[10] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[11] -1 0 0x00008000 - 0x000080ff (0x100) IXB
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x82400000 - 0x82400fff (0x1000) MX[B]
[6] -1 0 0x80200000 - 0x802fffff (0x100000) MX[B]
[7] -1 0 0x80100000 - 0x80100fff (0x1000) MX[B]
[8] -1 0 0x82200000 - 0x82200fff (0x1000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0x80620000 - 0x8063ffff (0x20000) MXB
[11] -1 0 0x80600000 - 0x80600fff (0x1000) MXB
[12] -1 0 0x81000000 - 0x81ffffff (0x1000000) MXB
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00006050 - 0x0000605f (0x10) IX[B]
[16] -1 0 0x00007000 - 0x0000703f (0x40) IX[B]
[17] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[18] -1 0 0x00008000 - 0x000080ff (0x100) IXB
(II) LoadModule: “GLcore”
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping “/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o”: No symbols found
Skipping “/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o”: No symbols found
Skipping “/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o”: No symbols found
Skipping “/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o”: No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: “bitmap”
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: “dbe”
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “ddc”
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: “dri”
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module “drm”
(II) LoadModule: “drm”
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: “extmod”
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “freetype”
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: “glx”
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module “GLcore”
(II) LoadModule: “GLcore”
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: “int10”
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: “record”
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: “speedo”
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping “/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o”: No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: “type1”
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: “vbe”
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: “ati”
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 6.5.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: “mouse”
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.5) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate “Device” section “Carte vidéo générique”.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active “Device” section “Carte vidéo générique”.
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x82400000 - 0x82400fff (0x1000) MX[B]
[6] -1 0 0x80200000 - 0x802fffff (0x100000) MX[B]
[7] -1 0 0x80100000 - 0x80100fff (0x1000) MX[B]
[8] -1 0 0x82200000 - 0x82200fff (0x1000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0x80620000 - 0x8063ffff (0x20000) MXB
[11] -1 0 0x80600000 - 0x80600fff (0x1000) MXB
[12] -1 0 0x81000000 - 0x81ffffff (0x1000000) MXB
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00006050 - 0x0000605f (0x10) IX[B]
[16] -1 0 0x00007000 - 0x0000703f (0x40) IX[B]
[17] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[18] -1 0 0x00008000 - 0x000080ff (0x100) IXB
(II) Loading sub module “atimisc”
(II) LoadModule: “atimisc”
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 6.5.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x82400000 - 0x82400fff (0x1000) MX[B]
[6] -1 0 0x80200000 - 0x802fffff (0x100000) MX[B]
[7] -1 0 0x80100000 - 0x80100fff (0x1000) MX[B]
[8] -1 0 0x82200000 - 0x82200fff (0x1000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0x80620000 - 0x8063ffff (0x20000) MXB
[11] -1 0 0x80600000 - 0x80600fff (0x1000) MXB
[12] -1 0 0x81000000 - 0x81ffffff (0x1000000) MXB
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00006050 - 0x0000605f (0x10) IX[B]
[19] -1 0 0x00007000 - 0x0000703f (0x40) IX[B]
[20] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[21] -1 0 0x00008000 - 0x000080ff (0x100) IXB
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: “ati”.
() ATI(0): Depth 24, (–) framebuffer bpp 32
(II) Loading sub module “int10”
(II) LoadModule: “int10”
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module “vbe”
(II) LoadModule: “vbe”
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8128 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64RM
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level none
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read failed
(II) ATI(0): BIOS Data: BIOSSize=0x10000, ROMTable=0x00FC.
(II) ATI(0): BIOS Data: ClockTable=0x0A48, FrequencyTable=0x0A22.
(II) ATI(0): BIOS Data: LCDTable=0x0170, LCDPanelInfo=0xED78.
(II) ATI(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x014C.
(II) ATI(0): BIOS Data: I2CType=0x0F, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(–) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(–) ATI(0): Chip type 4C4D “LM”, version 4, foundry TSMC, class 0, revision 0x01.
(–) ATI(0): AGP bus interface detected; block I/O base is 0x8000.
(–) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see gatos.sf.net.
(–) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(–) ATI(0): 1024x768 panel (ID 5) detected.
(–) ATI(0): Panel model UNIPAC UP141X01.
(–) ATI(0): Panel clock is 65.146 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0x817FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0x81000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0x80600400.
(II) ATI(0): Using Block 1 MMIO aperture at 0x80600000.
(==) ATI(0): Write-combining range (0x81000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(–) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Engine XCLK 114.773 MHz; Refresh rate code 10.
(–) ATI(0): Internal programmable clock generator detected.
(–) ATI(0): Reference clock 29.500 MHz.
(WW) ATI(0): Extraneous XF86Config HorizSync specification(s) ignored.
(WW) ATI(0): Extraneous XF86Config VertRefresh specification(s) ignored.
(II) ATI(0): Maximum clock: 229.00 MHz
(II) ATI(0): Not using default mode “1152x864” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “576x432” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1280x960” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “640x480” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1280x960” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “640x480” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1280x1024” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “640x512” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1280x1024” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “640x512” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1280x1024” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “640x512” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1600x1200” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “800x600” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1600x1200” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “800x600” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1600x1200” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “800x600” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1600x1200” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “800x600” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode “800x600” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1792x1344” (insufficient memory for mode)
(II) ATI(0): Not using default mode “896x672” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1792x1344” (insufficient memory for mode)
(II) ATI(0): Not using default mode “896x672” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1856x1392” (insufficient memory for mode)
(II) ATI(0): Not using default mode “928x696” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1856x1392” (insufficient memory for mode)
(II) ATI(0): Not using default mode “928x696” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1920x1440” (insufficient memory for mode)
(II) ATI(0): Not using default mode “960x720” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1920x1440” (insufficient memory for mode)
(II) ATI(0): Not using default mode “960x720” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1152x768” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1400x1050” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “700x525” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1400x1050” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “700x525” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1600x1024” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “800x512” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “1920x1440” (insufficient memory for mode)
(II) ATI(0): Not using default mode “960x720” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “2048x1536” (insufficient memory for mode)
(II) ATI(0): Not using default mode “1024x768” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “2048x1536” (insufficient memory for mode)
(II) ATI(0): Not using default mode “1024x768” (exceeds panel dimensions)
(II) ATI(0): Not using default mode “2048x1536” (insufficient memory for mode)
(II) ATI(0): Not using default mode “1024x768” (exceeds panel dimensions)
(–) ATI(0): Virtual size is 1024x768 (pitch 1024)
(
) ATI(0): *Default mode “1024x768”: 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) ATI(0): Modeline “1024x768” 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
() ATI(0): Default mode “1024x768”: 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(0): Modeline “1024x768” 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(
) ATI(0): Default mode “1024x768”: 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) ATI(0): Modeline “1024x768” 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
() ATI(0): Default mode “1024x768”: 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) ATI(0): Modeline “1024x768” 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(
) ATI(0): Default mode “1024x768”: 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) ATI(0): Modeline “1024x768” 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
() ATI(0): Built-in mode “Native panel mode”: 65.1 MHz, 62.6 kHz, 81.4 Hz
(II) ATI(0): Modeline “Native panel mode” 65.15 1024 1024 1032 1040 768 768 769 770
(
) ATI(0): Default mode “832x624”: 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) ATI(0): Modeline “832x624” 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
() ATI(0): Default mode “800x600”: 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline “800x600” 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(
) ATI(0): Default mode “800x600”: 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(0): Modeline “800x600” 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
() ATI(0): Default mode “800x600”: 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(0): Modeline “800x600” 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(
) ATI(0): Default mode “800x600”: 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(0): Modeline “800x600” 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
() ATI(0): Default mode “800x600”: 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline “800x600” 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(
) ATI(0): Default mode “640x480”: 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline “640x480” 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
() ATI(0): Default mode “640x480”: 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(0): Modeline “640x480” 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(
) ATI(0): Default mode “640x480”: 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline “640x480” 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
() ATI(0): Default mode “640x480”: 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline “640x480” 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(
) ATI(0): Default mode “720x400”: 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(0): Modeline “720x400” 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
() ATI(0): Default mode “640x400”: 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline “640x400” 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(
) ATI(0): Default mode “640x350”: 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline “640x350” 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
() ATI(0): Default mode “576x384”: 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) ATI(0): Modeline “576x384” 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(
) ATI(0): Default mode “512x384”: 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline “512x384” 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
() ATI(0): Default mode “512x384”: 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline “512x384” 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(
) ATI(0): Default mode “512x384”: 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) ATI(0): Modeline “512x384” 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
() ATI(0): Default mode “512x384”: 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline “512x384” 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(
) ATI(0): Default mode “512x384”: 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) ATI(0): Modeline “512x384” 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
() ATI(0): Default mode “416x312”: 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) ATI(0): Modeline “416x312” 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(
) ATI(0): Default mode “400x300”: 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline “400x300” 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
() ATI(0): Default mode “400x300”: 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline “400x300” 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(
) ATI(0): Default mode “400x300”: 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) ATI(0): Modeline “400x300” 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
() ATI(0): Default mode “400x300”: 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) ATI(0): Modeline “400x300” 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(
) ATI(0): Default mode “400x300”: 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline “400x300” 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
() ATI(0): Default mode “320x240”: 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) ATI(0): Modeline “320x240” 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(
) ATI(0): Default mode “320x240”: 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) ATI(0): Modeline “320x240” 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
() ATI(0): Default mode “320x240”: 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) ATI(0): Modeline “320x240” 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(
) ATI(0): Default mode “320x240”: 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline “320x240” 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
() ATI(0): Default mode “360x200”: 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline “360x200” 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(
) ATI(0): Default mode “320x200”: 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline “320x200” 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
() ATI(0): Default mode “320x175”: 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline “320x175” 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(++) ATI(0): DPI set to (100, 100)
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module “i2c”
(II) LoadModule: “i2c”
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) ATI(0): I2C bus “Mach64” initialized.
(–) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0x80600000 - 0x80600fff (0x1000) MS[B]
[1] 0 0 0x81000000 - 0x81ffffff (0x1000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0x82400000 - 0x82400fff (0x1000) MX[B]
[8] -1 0 0x80200000 - 0x802fffff (0x100000) MX[B]
[9] -1 0 0x80100000 - 0x80100fff (0x1000) MX[B]
[10] -1 0 0x82200000 - 0x82200fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0x80620000 - 0x8063ffff (0x20000) MXB
[13] -1 0 0x80600000 - 0x80600fff (0x1000) MXB
[14] -1 0 0x81000000 - 0x81ffffff (0x1000000) MXB
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MSB
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MSB
[18] 0 0 0x00008000 - 0x000080ff (0x100) IS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00006050 - 0x0000605f (0x10) IX[B]
[22] -1 0 0x00007000 - 0x0000703f (0x40) IX[B]
[23] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[24] -1 0 0x00008000 - 0x000080ff (0x100) IXB
[25] 0 0 0x000003b0 - 0x000003bb (0xc) ISB
[26] 0 0 0x000003c0 - 0x000003df (0x20) ISB
(==) ATI(0): Write-combining range (0x81000000,0x800000)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 1024 x 1279 rectangle at 0,768
(II) ATI(0): 768 x 1280 rectangle at 0,768
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(
) Option “dpms”
() ATI(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard “Generic Keyboard” handled by legacy driver
(
) Option “Protocol” “ImPS/2”
() Configured Mouse: Protocol: “ImPS/2”
(
) Option “SendCoreEvents” “true”
() Configured Mouse: always reports core events
(
) Option “Device” “/dev/input/mice”
() Option “Emulate3Buttons” “true”
(
) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Option “ZAxisMapping” “4 5”
(
) Configured Mouse: ZAxisMapping: buttons 4 and 5
() Configured Mouse: Buttons: 5
(
) Option “Protocol” “ImPS/2”
() Generic Mouse: Protocol: “ImPS/2”
(
) Option “CorePointer”
() Generic Mouse: Core Pointer
(
) Option “Device” “/dev/psaux”
() Option “Emulate3Buttons” “true”
(
) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Option “ZAxisMapping” “4 5”
(
) Generic Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Buttons: 5
(II) XINPUT: Adding extended input device “Generic Mouse” (type: MOUSE)
(II) XINPUT: Adding extended input device “Configured Mouse” (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) Generic Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for “.pcf” already registered at priority 0
Warning: font renderer for “.pcf.Z” already registered at priority 0
Warning: font renderer for “.pcf.gz” already registered at priority 0
Warning: font renderer for “.snf” already registered at priority 0
Warning: font renderer for “.snf.Z” already registered at priority 0
Warning: font renderer for “.snf.gz” already registered at priority 0
Warning: font renderer for “.bdf” already registered at priority 0
Warning: font renderer for “.bdf.Z” already registered at priority 0
Warning: font renderer for “.bdf.gz” already registered at priority 0
Warning: font renderer for “.pmf” already registered at priority 0


#2

tu as essayé de rajouter d’autres fontes (des 100dpi, des 75dpi)?
j’ai du en rajouter, pour corriger un problème similaire, plein, jusqu’a ce que ca marche.
Sinon, tu ne dis pas que tu as compilé ton 2.6.9 le 3/11 à 17h44…
Ca ne coinciderais pas AUSSI avec ton passage en sarge, par hasard ?
Qu’est ce que ca donne, avec ton noyau d’avant ?


#3

sinon, je viens par le plus grand des hasards de faire une mise à jour du paquet ‘font-config’, et il m’a demande quel type de rendu je voulais…
as tu testé un ‘dpkg-reconfigure font-config’ ?


#4

Merci bien pour ta réponse, je vais creuser tout ca!
Sinon, pour la recompile, non ca n’a pas de rapport.
Je vais tenter de reconfigurer le paquet font-config et installer de nouvelles polices. Encore merci!