Affichage tele

Support Debian
#1

impossible d’avoir tout l’écran du pc sur ma télé, malgré x manips avec nvidia-settigs

mon xorg.conf :

[code]# nvidia-settings: X configuration file generated by nvidia-settings

nvidia-settings: version 1.0 (randy@juliet2) Tue Jun 24 10:44:02 PDT 2008

nvidia-xconfig: X configuration file generated by nvidia-xconfig

nvidia-xconfig: version 1.0 (randy@juliet2) Fri Sep 5 15:03:39 PDT 2008

Section "ServerLayout"
Identifier "Layout0"
Screen 0 “Screen0” 0 0
InputDevice “Keyboard0” "CoreKeyboard"
InputDevice “Mouse0” "CorePointer"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "ServerFlags"
Option “Xinerama” "0"
EndSection

Section “InputDevice”

# generated from default
Identifier     "Mouse0"
Driver         "mouse"
Option         "Protocol" "auto"
Option         "Device" "/dev/psaux"
Option         "Emulate3Buttons" "no"
Option         "ZAxisMapping" "4 5"

EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
Option “XkbOptions” "lv3:ralt_switch"
EndSection

Section “Monitor”

# HorizSync source: edid, VertRefresh source: edid
Identifier     "Monitor0"
VendorName     "Unknown"
ModelName      "Acer AL1912"
HorizSync       24.0 - 80.0
VertRefresh     49.0 - 75.0
Option         "DPMS"

EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
EndSection

Section “Device”

Removed Option “TwinView” “true”

Removed Option “MetaModes” “1024x768,1024x768;800x600,800x600;640x480,640x480;512x384,512x384”

Identifier     "Videocard0"
Driver         "nvidia"
VendorName     "NVIDIA Corporation"
BoardName      "GeForce 8500 GT"
Option         "TwinViewOrientation" "Clone"
Option         "TVOutFormat" "SVIDEO"
Option         "TVStandard" "PAL-N"

EndSection

Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8500 GT"
BusID "PCI:5:0:0"
Screen 1
EndSection

Section “Screen”

Removed Option “TwinView” “1”

Removed Option “metamodes” “CRT: 1280x1024_75 +0+0, TV: nvidia-auto-select +1280+0; CRT: nvidia-auto-select +0+0, TV: nvidia-auto-select +1280+0”

Removed Option “TwinView” “0”

Removed Option “metamodes” “CRT: nvidia-auto-select +0+0; CRT: 1280x1024_75 +0+0”

Removed Option “metamodes” “CRT: nvidia-auto-select +0+0, TV: nvidia-auto-select +1280+0”

Removed Option “metamodes” “CRT: 1280x1024 +0+0, TV: 800x600 +1280+0”

Removed Option “metamodes” “CRT: 1280x1024_75 +0+0, TV: 800x600 +1280+0”

Removed Option “metamodes” “CRT: 1280x1024_75 +0+0, TV: 800x600 +0+0”

Removed Option “metamodes” “CRT: 1280x1024_75 +0+0, TV: 800x600 +1280+0”

Removed Option “metamodes” “CRT: 1280x1024_75 +0+0, TV: 800x600 +0+0”

Removed Option “metamodes” “CRT: 1280x1024_75 +0+0, TV: nvidia-auto-select +0+0”

Identifier     "Screen0"
Device         "Videocard0"
Monitor        "Monitor0"
DefaultDepth    24
Option         "TwinView" "1"
Option         "metamodes" "CRT: 1280x1024_75 +0+0, TV: 1024x768 @1280x1064 +0+0"
SubSection     "Display"
    Depth       24
EndSubSection

EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option “TwinView” "0"
Option “metamodes” "TV: nvidia-auto-select +0+0"
EndSection[/code]

#2

Salut, je n’ai pas beaucoup de temps alors voici mon xorg.conf :

[code]Section "ServerLayout"
Identifier "Layout0"
Screen 0 “Screen0” 0 0
InputDevice “Keyboard0” "CoreKeyboard"
InputDevice “Mouse0” "CorePointer"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "ServerFlags"
Option “Xinerama” "0"
EndSection

Section “InputDevice”

# generated from default
Identifier     "Mouse0"
Driver         "mouse"
Option         "Protocol" "auto"
Option         "Device" "/dev/psaux"
Option         "Emulate3Buttons" "no"
Option         "ZAxisMapping" "4 5"

EndSection

Section "InputDevice"
Identifier "keyboard0"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Proview"
HorizSync 30.0 - 80.0
VertRefresh 60.0 - 75.0
Option “TVStandard” "PAL-N"
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option “TVStandard” "PAL-N"
Option “TVOutFormat” “COMPOSITE”

EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 LE"
Option “TVStandard” "PAL-N"
EndSection

Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 LE"
BusID "PCI:5:0:0"
Screen 1
EndSection

Section “Screen”

Removed Option “TwinView” “0”

Removed Option “metamodes” “CRT: nvidia-auto-select +0+0”

Removed Option “metamodes” “CRT: nvidia-auto-select +0+0, TV: 1024x768 +0+0”

Identifier     "Screen0"
Device         "Videocard0"
Monitor        "Monitor0"
DefaultDepth    24
Option         "TwinView" "1"
Option         "TwinViewXineramaInfoOrder" "CRT-0"
Option         "metamodes" "CRT: 1280x1024_75 +0+0, TV: nvidia-auto-select +0+0"
SubSection     "Display"
    Depth       24
EndSubSection

EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option “TwinView” "0"
Option “metamodes” "TV: nvidia-auto-select +0+0"
Option “TVStandard” "PAL-N"
EndSection

Section "Extensions"
Option “Composite” "Enable"
EndSection
[/code]

J’ai une TV basique et sous-marque 56 cm et je me suis servi du générateur automatique de TwinView : secian.free.fr/astuces/twinview.html

Mais ne pas oublier la partie la plus importante dans le xorg.conf, à savoir PAL-N.

Désolé je dois partir en vitesse !

Bonne chance!

#3

Quel type de télé ? CRT ? LCD ?

#4

LCD

mon nouveau xorg.conf fait à partir de celui de ymer,
mais aucune amélioration

[code]

nvidia-settings: X configuration file generated by nvidia-settings

nvidia-settings: version 1.0 (randy@juliet2) Tue Jun 24 10:44:02 PDT 2008

nvidia-xconfig: X configuration file generated by nvidia-xconfig

nvidia-xconfig: version 1.0 (randy@juliet2) Fri Sep 5 15:03:39 PDT 2008

Section "ServerLayout"
Identifier "Layout0"
Screen 0 “Screen0” 0 0
InputDevice “Keyboard0” "CoreKeyboard"
InputDevice “Mouse0” "CorePointer"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "ServerFlags"
Option “Xinerama” "0"
EndSection

Section “InputDevice”

# generated from default
Identifier     "Mouse0"
Driver         "mouse"
Option         "Protocol" "auto"
Option         "Device" "/dev/psaux"
Option         "Emulate3Buttons" "no"
Option         "ZAxisMapping" "4 5"

EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer AL1912"
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
Option “TVStandard” "PAL-N"
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8500 GT"
Option “TVoutFormat” "SVIDEO"
Option “TVStandard” "PAL-N"
EndSection

Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8500 GT"
BusID "PCI:5:0:0"
Screen 1
EndSection

Section “Screen”

Removed Option “TwinView” “0”

Removed Option “metamodes” “CRT: nvidia-auto-select +0+0”

Removed Option “metamodes” “CRT: nvidia-auto-select +0+0, TV: 1024x768 +0+0”

Identifier     "Screen0"
Device         "Videocard0"
Monitor        "Monitor0"
DefaultDepth    24
Option         "TwinView" "1"
Option         "TwinViewXineramaInfoOrder" "CRT-0"
Option         "metamodes" "CRT: 1280x1024_75 +0+0, TV: nvidia-auto-select +0+0"
SubSection     "Display"
    Depth       24
EndSubSection

EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option “TwinView” "0"
Option “metamodes” "TV: nvidia-auto-select +0+0"
Option “TVStandard” "PAL-N"
EndSection

Section "Extensions"
Option “SVIDEO” "Enable"
EndSection[/code]

#5

Quelle résolution ?
Tu as 2 écrans connectés en twinview. Si tu n’a pas la même résolution sur les 2, forcément tu a une image de taille différente.
Tu ne précises pas la résolution dans screen1

#6

[quote=“piratebab”]Quelle résolution ?
Tu as 2 écrans connectés en twinview. Si tu n’a pas la même résolution sur les 2, forcément tu a une image de taille différente.
Tu ne précises pas la résolution dans screen1[/quote]

Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "TV: 1024x768 @1280x1064 +0+0" EndSection
change rien :cry:

#7

essaie de booter en connectant uniquement la TV

#8

non plus :frowning:
rien à faire, je peux diminuer la résolution de la telé, par exemple en 512x384, j’ai un dixième d’écran, en 800x600 un quart et si j’augmente encore j’ai plus d’affichage…
:smt022 :smt022 :smt022

#9

Il me semble que l’option TvStandart ne s’applique qu’au TV cathodique. Si tu as un LCD connecté en DVI ou HDMI, il faut le considérer comme un moniteur informatique.