AMD écran noir / Jessie

Bonjour,

J’ai cassé ma debian en faisant une mise à jour. Je n’arrive pas à réparer.
En mode normal, j’arrive à un écran noir.
En mode recovery j’arrive à un terminal sans internet.

J’ai essayé, en supprimant fglrx, du coup j’arrive dans un terminal avec internet.
J’ai essayé en instalant linux-firmware-nonfree.
En reinstallant xserver-xorg-video-ati
En supprimant /etc/X11/jesaisplus/xorg.conf

J’ai plus d’idée…

Ça marchait très très bien avant la maj.

Pourriez-vous m’aider?

J’ai un log (je pense que c’est le bon /var/log/Xorg.0.log ? ):

[code][ 22.781]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 22.782] X Protocol Version 11, Revision 0
[ 22.782] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 22.782] Current Operating System: Linux Roberto 3.12-1-686-pae #1 SMP Debian 3.12.9-1 (2014-02-01) i686
[ 22.782] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-686-pae root=/dev/mapper/fedora00-root ro quiet
[ 22.782] Build Date: 07 February 2014 12:14:17PM
[ 22.782] xorg-server 2:1.15.0-2 (http://www.debian.org/support)
[ 22.783] Current version of pixman: 0.32.4
[ 22.783] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.783] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.784] (==) Log file: “/var/log/Xorg.0.log”, Time: Fri Feb 21 19:49:26 2014
[ 22.784] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 22.784] (==) No Layout section. Using the first Screen section.
[ 22.784] (==) No screen section available. Using defaults.
[ 22.784] (
) |–>Screen “Default Screen Section” (0)
[ 22.784] (**) | |–>Monitor “”
[ 22.785] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[ 22.785] (==) Automatically adding devices
[ 22.785] (==) Automatically enabling devices
[ 22.785] (==) Automatically adding GPU devices
[ 22.785] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
[ 22.785] Entry deleted from font path.
[ 22.785] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 22.785] (==) ModulePath set to “/usr/lib/xorg/modules”
[ 22.785] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.785] (II) Loader magic: 0xb77936c0
[ 22.785] (II) Module ABI versions:
[ 22.785] X.Org ANSI C Emulation: 0.4
[ 22.785] X.Org Video Driver: 15.0
[ 22.785] X.Org XInput driver : 20.0
[ 22.785] X.Org Server Extension : 8.0
[ 22.786] (–) PCI:*(0:1:0:0) 1002:683d:174b:e214 rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x???/131072
[ 22.786] Initializing built-in extension Generic Event Extension
[ 22.786] Initializing built-in extension SHAPE
[ 22.786] Initializing built-in extension MIT-SHM
[ 22.786] Initializing built-in extension XInputExtension
[ 22.786] Initializing built-in extension XTEST
[ 22.787] Initializing built-in extension BIG-REQUESTS
[ 22.787] Initializing built-in extension SYNC
[ 22.787] Initializing built-in extension XKEYBOARD
[ 22.787] Initializing built-in extension XC-MISC
[ 22.787] Initializing built-in extension SECURITY
[ 22.787] Initializing built-in extension XINERAMA
[ 22.787] Initializing built-in extension XFIXES
[ 22.787] Initializing built-in extension RENDER
[ 22.788] Initializing built-in extension RANDR
[ 22.788] Initializing built-in extension COMPOSITE
[ 22.788] Initializing built-in extension DAMAGE
[ 22.788] Initializing built-in extension MIT-SCREEN-SAVER
[ 22.788] Initializing built-in extension DOUBLE-BUFFER
[ 22.788] Initializing built-in extension RECORD
[ 22.788] Initializing built-in extension DPMS
[ 22.788] Initializing built-in extension Present
[ 22.788] Initializing built-in extension DRI3
[ 22.789] Initializing built-in extension X-Resource
[ 22.789] Initializing built-in extension XVideo
[ 22.789] Initializing built-in extension XVideo-MotionCompensation
[ 22.789] Initializing built-in extension SELinux
[ 22.789] Initializing built-in extension XFree86-VidModeExtension
[ 22.789] Initializing built-in extension XFree86-DGA
[ 22.789] Initializing built-in extension XFree86-DRI
[ 22.789] Initializing built-in extension DRI2
[ 22.789] (II) LoadModule: “glx”
[ 22.790] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 22.790] (II) Module glx: vendor=“Advanced Micro Devices, Inc.”
[ 22.790] compiled for 6.9.0, module version = 1.0.0
[ 22.790] Loading extension GLX
[ 22.790] (==) Matched ati as autoconfigured driver 0
[ 22.790] (==) Matched modesetting as autoconfigured driver 1
[ 22.790] (==) Matched fbdev as autoconfigured driver 2
[ 22.790] (==) Matched vesa as autoconfigured driver 3
[ 22.790] (==) Assigned the driver to the xf86ConfigLayout
[ 22.790] (II) LoadModule: “ati”
[ 22.790] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 22.790] (II) Module ati: vendor=“X.Org Foundation”
[ 22.790] compiled for 1.15.0, module version = 7.3.0
[ 22.790] Module class: X.Org Video Driver
[ 22.790] ABI class: X.Org Video Driver, version 15.0
[ 22.790] (II) LoadModule: “radeon”
[ 22.790] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 22.790] (II) Module radeon: vendor=“X.Org Foundation”
[ 22.791] compiled for 1.15.0, module version = 7.3.0
[ 22.791] Module class: X.Org Video Driver
[ 22.791] ABI class: X.Org Video Driver, version 15.0
[ 22.791] (II) LoadModule: “modesetting”
[ 22.791] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 22.791] (II) Module modesetting: vendor=“X.Org Foundation”
[ 22.791] compiled for 1.15.0, module version = 0.8.1
[ 22.791] Module class: X.Org Video Driver
[ 22.791] ABI class: X.Org Video Driver, version 15.0
[ 22.791] (II) LoadModule: “fbdev”
[ 22.791] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 22.791] (II) Module fbdev: vendor=“X.Org Foundation”
[ 22.791] compiled for 1.15.0, module version = 0.4.4
[ 22.791] Module class: X.Org Video Driver
[ 22.791] ABI class: X.Org Video Driver, version 15.0
[ 22.791] (II) LoadModule: “vesa”
[ 22.791] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 22.791] (II) Module vesa: vendor=“X.Org Foundation”
[ 22.791] compiled for 1.15.0, module version = 2.3.3
[ 22.791] Module class: X.Org Video Driver
[ 22.791] ABI class: X.Org Video Driver, version 15.0
[ 22.791] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 22.798] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 22.798] (II) FBDEV: driver for framebuffer: fbdev
[ 22.798] (II) VESA: driver for VESA chipsets: vesa
[ 22.798] (–) using VT number 7

[ 22.800] (II) [KMS] drm report modesetting isn’t supported.
[ 22.800] (EE) open /dev/dri/card0: No such file or directory
[ 22.800] (WW) Falling back to old probe method for modesetting
[ 22.800] (EE) open /dev/dri/card0: No such file or directory
[ 22.800] (II) Loading sub module “fbdevhw”
[ 22.800] (II) LoadModule: “fbdevhw”
[ 22.800] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 22.800] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 22.800] compiled for 1.15.0, module version = 0.0.2
[ 22.800] ABI class: X.Org Video Driver, version 15.0
[ 22.801] (EE) open /dev/fb0: No such file or directory
[ 22.801] (WW) Falling back to old probe method for fbdev
[ 22.801] (II) Loading sub module “fbdevhw”
[ 22.801] (II) LoadModule: “fbdevhw”
[ 22.801] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 22.801] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 22.801] compiled for 1.15.0, module version = 0.0.2
[ 22.801] ABI class: X.Org Video Driver, version 15.0
[ 22.801] (EE) open /dev/fb0: No such file or directory
[ 22.801] vesa: Ignoring device with a bound kernel driver
[ 22.801] (WW) Falling back to old probe method for vesa
[ 22.801] (EE) Screen 0 deleted because of no matching config section.
[ 22.801] (II) UnloadModule: “radeon”
[ 22.801] (EE) Screen 0 deleted because of no matching config section.
[ 22.801] (II) UnloadModule: “modesetting”
[ 22.801] (EE) Screen 0 deleted because of no matching config section.
[ 22.801] (II) UnloadModule: “fbdev”
[ 22.801] (II) UnloadSubModule: “fbdevhw”
[ 22.801] (EE) Screen 0 deleted because of no matching config section.
[ 22.801] (II) UnloadModule: “vesa”
[ 22.801] (EE) Device(s) detected, but none match those in the config file.
[ 22.801] (EE)
Fatal server error:
[ 22.801] (EE) no screens found(EE)
[ 22.801] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 22.801] (EE) Please also check the log file at “/var/log/Xorg.0.log” for additional information.
[ 22.801] (EE)
[ 22.803] (EE) Server terminated with error (1). Closing log file.[/code]

Merci de votre attention,

et Ciao

Si ta mise à jour s’est mal passée (elle était de quelle nature ?), tu peux avoir une idée de ce qui a été effectué en regardant le fichier history de APT (dans /var/log).

Le fichier Xorg.0.log que tu cites montre effectivement certains problèmes, mais difficile de savoir ce qui les cause.

[mono]dmesg[/mono] indique peut-être aussi quelques pistes.

Merci de ta réponse. Voici l’historique d’apt:

Start-Date: 2014-02-20  20:21:24
Commandline: /usr/sbin/synaptic
Install: 3dchess:i386 (0.8.1-17), libgcrypt20:i386 (1.6.1-1, automatic), libxcb-image0:i386 (0.3.9-1, automatic), libxcb-icccm4:i386 (0.3.9-2, automatic), libxshmfence1:i386 (1.1-2, automatic), xaw3dg:i386 (1.5+E-18.2, automatic), libxcb-xf86dri0:i386 (1.10-2, automatic)
Upgrade: libfontembed1:i386 (1.0.44-2, 1.0.45-1), xserver-xorg-input-synaptics:i386 (1.7.3-1, 1.7.3-1+b1), xserver-xorg-video-tdfx:i386 (1.4.5-1, 1.4.5-1+b1), xserver-xorg-video-vmware:i386 (13.0.1-2, 13.0.1-3+b1), lvm2:i386 (2.02.104-1, 2.02.104-2), libdevmapper1.02.1:i386 (1.02.83-1, 1.02.83-2), libpcsclite1:i386 (1.8.10-1, 1.8.11-1), libmagic1:i386 (5.14-2, 5.17-0.1), python-gtkspell:i386 (2.25.3-12, 2.25.3-13), xserver-xorg-video-sisusb:i386 (0.9.6-2, 0.9.6-2+b1), xserver-xorg-video-savage:i386 (2.3.7-2, 2.3.7-2+b1), libcupsfilters1:i386 (1.0.44-2, 1.0.45-1), libgl1-fglrx-glx:i386 (13.12-4, 14.1~beta1.3-1), xserver-xorg-core:i386 (1.14.5-1, 1.15.0-2), xserver-xorg-video-mga:i386 (1.6.3-1, 1.6.3-1+b1), xserver-xorg-video-r128:i386 (6.9.2-1, 6.9.2-1+b1), xserver-xorg-video-geode:i386 (2.11.15-1, 2.11.15-2), file:i386 (5.14-2, 5.17-0.1), dmsetup:i386 (1.02.83-1, 1.02.83-2), xserver-common:i386 (1.14.5-1, 1.15.0-2), xserver-xorg-video-neomagic:i386 (1.2.8-1, 1.2.8-1+b1), xserver-xorg-video-modesetting:i386 (0.8.1-1, 0.8.1-1+b1), xserver-xorg-video-siliconmotion:i386 (1.7.7-2, 1.7.7-2+b1), xserver-xorg-video-cirrus:i386 (1.5.2-1+b1, 1.5.2-1+b2), libdevmapper-event1.02.1:i386 (1.02.83-1, 1.02.83-2), xserver-xorg-video-nouveau:i386 (1.0.10-1, 1.0.10-1+b1), cups-filters:i386 (1.0.44-2, 1.0.45-1), xserver-xorg-video-openchrome:i386 (0.3.3-1, 0.3.3-1+b1), xserver-xephyr:i386 (1.14.5-1, 1.15.0-2), fglrx-atieventsd:i386 (13.12-4, 14.1~beta1.3-1), xserver-xorg-video-intel:i386 (2.21.15-1+b2, 2.21.15-2+b1), xserver-xorg-video-mach64:i386 (6.9.4-1+b1, 6.9.4-1+b2), xserver-xorg-input-wacom:i386 (0.23.0+20131011-1, 0.23.0+20131011-1+b1), xserver-xorg-video-fbdev:i386 (0.4.4-1, 0.4.4-1+b1), libfglrx:i386 (13.12-4, 14.1~beta1.3-1), xserver-xorg-video-radeon:i386 (7.3.0-1, 7.3.0-1+b1), cups-browsed:i386 (1.0.44-2, 1.0.45-1), xserver-xorg-input-evdev:i386 (2.8.2-1, 2.8.2-1+b1), xserver-xorg-video-vesa:i386 (2.3.3-1+b1, 2.3.3-1+b2), fglrx-driver:i386 (13.12-4, 14.1~beta1.3-1), fglrx-control:i386 (13.12-4, 14.1~beta1.3-1), xserver-xorg-video-trident:i386 (1.3.6-2, 1.3.6-2+b1), xserver-xorg-input-mouse:i386 (1.9.0-1+b1, 1.9.0-1+b2), xserver-xorg-video-ati:i386 (7.3.0-1, 7.3.0-1+b1), fglrx-modules-dkms:i386 (13.12-4, 14.1~beta1.3-1), cups-filters-core-drivers:i386 (1.0.44-2, 1.0.45-1), liblvm2app2.2:i386 (2.02.104-1, 2.02.104-2), xserver-xorg-input-vmmouse:i386 (13.0.0-1+b1, 13.0.0-1+b2), libfglrx-amdxvba1:i386 (13.12-4, 14.1~beta1.3-1)
Remove: xserver-xorg-video-qxl:i386 (0.1.0-2.1)
End-Date: 2014-02-20  20:23:11

Start-Date: 2014-02-21  10:27:41
End-Date: 2014-02-21  10:27:42

Start-Date: 2014-02-21  11:47:44
End-Date: 2014-02-21  11:47:44

Start-Date: 2014-02-21  11:49:33
End-Date: 2014-02-21  11:49:33

Start-Date: 2014-02-21  11:54:33
End-Date: 2014-02-21  11:54:33

Start-Date: 2014-02-21  11:55:02
Remove: fglrx-driver:i386 (14.1~beta1.3-1), fglrx-control:i386 (14.1~beta1.3-1)
End-Date: 2014-02-21  11:55:36

Start-Date: 2014-02-21  12:00:44
Commandline: apt-get install --reinstall xserver-xorg-video-ati
Reinstall: xserver-xorg-video-ati:i386 (7.3.0-1+b1)
End-Date: 2014-02-21  12:00:53

Start-Date: 2014-02-21  12:03:22
Commandline: apt-get install fglrx-driver
Install: fglrx-driver:i386 (14.1~beta1.3-1)
End-Date: 2014-02-21  12:03:34

Start-Date: 2014-02-21  12:03:52
Commandline: apt-get upgrade
Upgrade: cracklib-runtime:i386 (2.9.1-1, 2.9.1-1+b1), libglib2.0-data:i386 (2.36.4-1, 2.38.2-5), manpages:i386 (3.57-1, 3.58-1), transmission-gtk:i386 (2.81-1, 2.82-1.1), libgraphite2-3:i386 (1.2.4-1, 1.2.4-2), libglib2.0-dev:i386 (2.36.4-1, 2.38.2-5), transmission-common:i386 (2.81-1, 2.82-1.1), whiptail:i386 (0.52.15-3, 0.52.15-3+b1), python-feedparser:i386 (5.1.3-1, 5.1.3-2), pciutils:i386 (3.2.1-1, 3.2.1-2), transmission:i386 (2.81-1, 2.82-1.1), libglib2.0-0:i386 (2.36.4-1, 2.38.2-5), manpages-fr:i386 (3.57d1p1-1, 3.58d1p1-1), libnewt0.52:i386 (0.52.15-3, 0.52.15-3+b1), openssh-client:i386 (6.4p1-2, 6.5p1-4), libglib2.0-bin:i386 (2.36.4-1, 2.38.2-5), libcrack2:i386 (2.9.1-1, 2.9.1-1+b1), manpages-dev:i386 (3.57-1, 3.58-1), python-netifaces:i386 (0.8-3, 0.8-3+b1), libcwidget3:i386 (0.5.16-3.5, 0.5.16-4), libpci3:i386 (3.2.1-1, 3.2.1-2)
End-Date: 2014-02-21  12:04:25

Start-Date: 2014-02-21  19:07:55
Remove: fglrx-driver:i386 (14.1~beta1.3-1)
End-Date: 2014-02-21  19:09:12

Start-Date: 2014-02-21  19:12:35
End-Date: 2014-02-21  19:12:35

Start-Date: 2014-02-21  19:13:02
End-Date: 2014-02-21  19:13:02

Start-Date: 2014-02-21  19:13:15
End-Date: 2014-02-21  19:13:15

Start-Date: 2014-02-21  19:13:50
End-Date: 2014-02-21  19:13:50

Start-Date: 2014-02-21  19:16:20
Commandline: apt-get install --reinstall xserver-xorg-video-radeon
Reinstall: xserver-xorg-video-radeon:i386 (7.3.0-1+b1)
End-Date: 2014-02-21  19:16:29

Start-Date: 2014-02-21  19:16:56
Commandline: apt-get install --reinstall gnome-shell
Reinstall: gnome-shell:i386 (3.8.4-5)
End-Date: 2014-02-21  19:17:03

Start-Date: 2014-02-21  19:32:33
Commandline: apt-get install firmware-linux-nonfree
Install: firmware-linux-nonfree:i386 (0.40)
End-Date: 2014-02-21  19:32:48

Start-Date: 2014-02-21  19:33:41
Commandline: apt-get install --reinstall xserver-xorg-video-radeon xserver-xorg-video-ati
Reinstall: xserver-xorg-video-radeon:i386 (7.3.0-1+b1), xserver-xorg-video-ati:i386 (7.3.0-1+b1)
End-Date: 2014-02-21  19:33:44

Start-Date: 2014-02-21  19:47:36
Commandline: apt-get install fglrx-driver
Install: fglrx-driver:i386 (14.1~beta1.3-1)
End-Date: 2014-02-21  19:47:56

Start-Date: 2014-02-21  19:48:27
Commandline: apt-get install fglrx-control
Install: fglrx-control:i386 (14.1~beta1.3-1)
End-Date: 2014-02-21  19:48:31[/code]

C'est cette mise à jour qui a causé le problème: 
[code]Start-Date: 2014-02-20  20:21:24
Commandline: /usr/sbin/synaptic
Install: 3dchess:i386 (0.8.1-17), libgcrypt20:i386 (1.6.1-1, automatic), libxcb-image0:i386 (0.3.9-1, automatic), libxcb-icccm4:i386 (0.3.9-2, automatic), libxshmfence1:i386 (1.1-2, automatic), xaw3dg:i386 (1.5+E-18.2, automatic), libxcb-xf86dri0:i386 (1.10-2, automatic)
Upgrade: libfontembed1:i386 (1.0.44-2, 1.0.45-1), xserver-xorg-input-synaptics:i386 (1.7.3-1, 1.7.3-1+b1), xserver-xorg-video-tdfx:i386 (1.4.5-1, 1.4.5-1+b1), xserver-xorg-video-vmware:i386 (13.0.1-2, 13.0.1-3+b1), lvm2:i386 (2.02.104-1, 2.02.104-2), libdevmapper1.02.1:i386 (1.02.83-1, 1.02.83-2), libpcsclite1:i386 (1.8.10-1, 1.8.11-1), libmagic1:i386 (5.14-2, 5.17-0.1), python-gtkspell:i386 (2.25.3-12, 2.25.3-13), xserver-xorg-video-sisusb:i386 (0.9.6-2, 0.9.6-2+b1), xserver-xorg-video-savage:i386 (2.3.7-2, 2.3.7-2+b1), libcupsfilters1:i386 (1.0.44-2, 1.0.45-1), libgl1-fglrx-glx:i386 (13.12-4, 14.1~beta1.3-1), xserver-xorg-core:i386 (1.14.5-1, 1.15.0-2), xserver-xorg-video-mga:i386 (1.6.3-1, 1.6.3-1+b1), xserver-xorg-video-r128:i386 (6.9.2-1, 6.9.2-1+b1), xserver-xorg-video-geode:i386 (2.11.15-1, 2.11.15-2), file:i386 (5.14-2, 5.17-0.1), dmsetup:i386 (1.02.83-1, 1.02.83-2), xserver-common:i386 (1.14.5-1, 1.15.0-2), xserver-xorg-video-neomagic:i386 (1.2.8-1, 1.2.8-1+b1), xserver-xorg-video-modesetting:i386 (0.8.1-1, 0.8.1-1+b1), xserver-xorg-video-siliconmotion:i386 (1.7.7-2, 1.7.7-2+b1), xserver-xorg-video-cirrus:i386 (1.5.2-1+b1, 1.5.2-1+b2), libdevmapper-event1.02.1:i386 (1.02.83-1, 1.02.83-2), xserver-xorg-video-nouveau:i386 (1.0.10-1, 1.0.10-1+b1), cups-filters:i386 (1.0.44-2, 1.0.45-1), xserver-xorg-video-openchrome:i386 (0.3.3-1, 0.3.3-1+b1), xserver-xephyr:i386 (1.14.5-1, 1.15.0-2), fglrx-atieventsd:i386 (13.12-4, 14.1~beta1.3-1), xserver-xorg-video-intel:i386 (2.21.15-1+b2, 2.21.15-2+b1), xserver-xorg-video-mach64:i386 (6.9.4-1+b1, 6.9.4-1+b2), xserver-xorg-input-wacom:i386 (0.23.0+20131011-1, 0.23.0+20131011-1+b1), xserver-xorg-video-fbdev:i386 (0.4.4-1, 0.4.4-1+b1), libfglrx:i386 (13.12-4, 14.1~beta1.3-1), xserver-xorg-video-radeon:i386 (7.3.0-1, 7.3.0-1+b1), cups-browsed:i386 (1.0.44-2, 1.0.45-1), xserver-xorg-input-evdev:i386 (2.8.2-1, 2.8.2-1+b1), xserver-xorg-video-vesa:i386 (2.3.3-1+b1, 2.3.3-1+b2), fglrx-driver:i386 (13.12-4, 14.1~beta1.3-1), fglrx-control:i386 (13.12-4, 14.1~beta1.3-1), xserver-xorg-video-trident:i386 (1.3.6-2, 1.3.6-2+b1), xserver-xorg-input-mouse:i386 (1.9.0-1+b1, 1.9.0-1+b2), xserver-xorg-video-ati:i386 (7.3.0-1, 7.3.0-1+b1), fglrx-modules-dkms:i386 (13.12-4, 14.1~beta1.3-1), cups-filters-core-drivers:i386 (1.0.44-2, 1.0.45-1), liblvm2app2.2:i386 (2.02.104-1, 2.02.104-2), xserver-xorg-input-vmmouse:i386 (13.0.0-1+b1, 13.0.0-1+b2), libfglrx-amdxvba1:i386 (13.12-4, 14.1~beta1.3-1)
Remove: xserver-xorg-video-qxl:i386 (0.1.0-2.1)
End-Date: 2014-02-20  20:23:11

Je ne sais pas comment on revient en arrière.

Le résultat de dmesg:

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.12.9-1 (2014-02-01) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddb2afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ddb2b000-0x00000000ddd29fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddd2a000-0x00000000dddb4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dddb5000-0x00000000dde52fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dde53000-0x00000000dedccfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dedcd000-0x00000000dedcdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dedce000-0x00000000dee10fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dee11000-0x00000000df232fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df233000-0x00000000df7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: MSI MS-7758/Z77A-G43 (MS-7758), BIOS V2.8 12/28/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FF0000000 write-back [ 0.000000] 2 base 210000000 mask FF8000000 write-back [ 0.000000] 3 base 218000000 mask FFC000000 write-back [ 0.000000] 4 base 21C000000 mask FFE000000 write-back [ 0.000000] 5 base 21E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fd7d0-0x000fd7df] mapped at [c00fd7d0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff] [ 0.000000] [mem 0x37600000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff] [ 0.000000] [mem 0x34000000-0x375fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff] [ 0.000000] [mem 0x37800000-0x379fdfff] page 4k [ 0.000000] BRK [0x016cc000, 0x016ccfff] PGTABLE [ 0.000000] BRK [0x016cd000, 0x016cefff] PGTABLE [ 0.000000] RAMDISK: [mem 0x365ae000-0x372cefff] [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT dde43078 0006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP dde4d2a0 0010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT dde43178 0A126 (v02 ALASKA A M I 00000022 INTL 20051117) [ 0.000000] ACPI: FACS dde51080 00040 [ 0.000000] ACPI: APIC dde4d3b0 00072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT dde4d428 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG dde4d470 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT dde4d4b0 007CA (v01 Intel_ AoacTabl 00001000 INTL 20091112) [ 0.000000] ACPI: HPET dde4dc80 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT dde4dcb8 004E9 (v01 IdeRef IdeTable 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT dde4e1a8 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT dde4eb58 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 7798MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] BRK [0x016cf000, 0x016cffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x379fdfff] [ 0.000000] HighMem [mem 0x379fe000-0x1effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xddb2afff] [ 0.000000] node 0: [mem 0xddd2a000-0xdddb4fff] [ 0.000000] node 0: [mem 0xdedcd000-0xdedcdfff] [ 0.000000] node 0: [mem 0xdee11000-0xdf232fff] [ 0.000000] node 0: [mem 0xdf7f4000-0xdf7fffff] [ 0.000000] node 0: [mem 0x00000000-0x1effffff] [ 0.000000] On node 0 totalpages: 2084738 [ 0.000000] free_area_init_node: node 0, pgdat c1598900, node_mem_map f21ce020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 223742 pages, LIFO batch:31 [ 0.000000] HighMem zone: 15597 pages used for memmap [ 0.000000] HighMem zone: 1856999 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s35648 r0 d21696 u57344 [ 0.000000] pcpu-alloc: s35648 r0 d21696 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2082958 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-686-pae root=/dev/mapper/fedora00-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000) [ 0.000000] Memory: 8247864K/8338952K available (4131K kernel code, 373K rwdata, 1264K rodata, 520K init, 580K bss, 91088K reserved, 7427996K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc15a5000 - 0xc1627000 ( 520 kB) [ 0.000000] .data : 0xc1409078 - 0xc15a4680 (1645 kB) [ 0.000000] .text : 0xc1000000 - 0xc1409078 (4132 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3400.076 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.15 BogoMIPS (lpj=13600304) [ 0.000002] pid_max: default: 32768 minimum: 301 [ 0.000016] Security Framework initialized [ 0.000019] AppArmor: AppArmor disabled by boot time parameter [ 0.000019] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000027] Mount-cache hash table entries: 512 [ 0.000134] Initializing cgroup subsys memory [ 0.000139] Initializing cgroup subsys devices [ 0.000140] Initializing cgroup subsys freezer [ 0.000141] Initializing cgroup subsys net_cls [ 0.000142] Initializing cgroup subsys blkio [ 0.000143] Initializing cgroup subsys perf_event [ 0.000158] CPU: Physical Processor ID: 0 [ 0.000159] CPU: Processor Core ID: 0 [ 0.000162] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000162] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000164] mce: CPU supports 9 MCE banks [ 0.000174] CPU0: Thermal monitoring enabled (TM1) [ 0.000182] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000182] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000182] tlb_flushall_shift: 5 [ 0.000283] Freeing SMP alternatives memory: 20K (c1627000 - c162c000) [ 0.000911] ACPI: Core revision 20130725 [ 0.004884] ACPI: All ACPI Tables successfully acquired [ 0.015416] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.015803] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.055464] smpboot: CPU0: Intel(R) Core(TM) i5-2550K CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07) [ 0.055468] TSC deadline timer enabled [ 0.055473] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.055479] ... version: 3 [ 0.055479] ... bit width: 48 [ 0.055480] ... generic registers: 8 [ 0.055481] ... value mask: 0000ffffffffffff [ 0.055481] ... max period: 0000ffffffffffff [ 0.055482] ... fixed-purpose events: 3 [ 0.055483] ... event mask: 00000007000000ff [ 0.055625] CPU 1 irqstacks, hard=f74d4000 soft=f74d6000 [ 0.065927] Initializing CPU#1 [ 0.068791] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.055626] smpboot: Booting Node 0, Processors # 1 [ 0.068852] CPU 2 irqstacks, hard=f7546000 soft=f7548000 [ 0.079067] Initializing CPU#2 [ 0.068853] # 2 [ 0.082043] CPU 3 irqstacks, hard=f7598000 soft=f759a000 [ 0.082045] # 3 OK [ 0.092253] Initializing CPU#3 [ 0.095181] Brought up 4 CPUs [ 0.095183] smpboot: Total of 4 processors activated (27200.60 BogoMIPS) [ 0.097480] devtmpfs: initialized [ 0.097607] PM: Registering ACPI NVS region [mem 0xdddb5000-0xdde52fff] (647168 bytes) [ 0.097617] PM: Registering ACPI NVS region [mem 0xdedce000-0xdee10fff] (274432 bytes) [ 0.097717] NET: Registered protocol family 16 [ 0.097773] cpuidle: using governor ladder [ 0.097774] cpuidle: using governor menu [ 0.097794] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.097795] ACPI: bus type PCI registered [ 0.097796] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.097831] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.097833] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.097834] PCI: Using MMCONFIG for extended config space [ 0.097835] PCI: Using configuration type 1 for base access [ 0.098180] bio: create slab <bio-0> at 0 [ 0.098252] ACPI: Added _OSI(Module Device) [ 0.098253] ACPI: Added _OSI(Processor Device) [ 0.098254] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.098255] ACPI: Added _OSI(Processor Aggregator Device) [ 0.099187] ACPI: EC: Look up EC in DSDT [ 0.100252] ACPI: Executed 1 blocks of module-level executable AML code [ 0.114236] ACPI: SSDT ddcdb018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.114478] ACPI: Dynamic OEM Table Load: [ 0.114479] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.123315] ACPI: SSDT ddcdca98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.123580] ACPI: Dynamic OEM Table Load: [ 0.123581] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.139207] ACPI: SSDT ddcdad98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.139447] ACPI: Dynamic OEM Table Load: [ 0.139448] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.149749] ACPI: Interpreter enabled [ 0.149755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.149758] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.149766] ACPI: (supports S0 S3 S4 S5) [ 0.149767] ACPI: Using IOAPIC for interrupt routing [ 0.149784] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.149897] ACPI: No dock devices found. [ 0.155062] ACPI: Power Resource [FN00] (off) [ 0.155118] ACPI: Power Resource [FN01] (off) [ 0.155172] ACPI: Power Resource [FN02] (off) [ 0.155225] ACPI: Power Resource [FN03] (off) [ 0.155278] ACPI: Power Resource [FN04] (off) [ 0.155677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.155831] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.155976] acpi PNP0A08:00: ACPI _OSC control (0x18) granted [ 0.156440] PCI host bridge to bus 0000:00 [ 0.156442] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.156443] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.156445] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.156446] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.156447] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.156448] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.156449] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.156450] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.156451] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.156452] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.156454] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.156459] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.156527] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.156549] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.156584] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.156630] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.156650] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit] [ 0.156715] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.156753] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.156780] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.156801] pci 0000:00:16.0: reg 0x10: [mem 0xf7f18000-0xf7f1800f 64bit] [ 0.156870] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.156940] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.156959] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f16000-0xf7f163ff] [ 0.157042] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.157092] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.157117] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.157131] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit] [ 0.157191] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.157232] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.157255] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.157326] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.157369] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.157392] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.157464] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.157506] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.157530] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401 [ 0.157601] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.157643] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.157673] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.157692] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f15000-0xf7f153ff] [ 0.157775] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.157823] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.157848] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.158002] pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f [ 0.158014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.158021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.158027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.158034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.158040] pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f] [ 0.158047] pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f] [ 0.158125] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.158138] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f14000-0xf7f140ff 64bit] [ 0.158156] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.158223] pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185 [ 0.158236] pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077] [ 0.158242] pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063] [ 0.158248] pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057] [ 0.158255] pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043] [ 0.158261] pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f] [ 0.158267] pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f] [ 0.158376] pci 0000:01:00.0: [1002:683d] type 00 class 0x030000 [ 0.158386] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.158393] pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit] [ 0.158398] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.158406] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref] [ 0.158433] pci 0000:01:00.0: supports D1 D2 [ 0.158434] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.158467] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 [ 0.158476] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit] [ 0.158521] pci 0000:01:00.1: supports D1 D2 [ 0.165956] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.165958] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.165960] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.165962] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.166017] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.166100] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.166118] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.166151] pci 0000:03:00.0: reg 0x18: [mem 0xf7d04000-0xf7d04fff 64bit pref] [ 0.166171] pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref] [ 0.166259] pci 0000:03:00.0: supports D1 D2 [ 0.166260] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166294] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.173959] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.173962] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.173965] pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.174047] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400 [ 0.174189] pci 0000:04:00.0: supports D1 D2 [ 0.174190] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.174221] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.181953] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode) [ 0.181962] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.181963] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.181964] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.181965] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.181966] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.181967] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.181969] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.181970] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.181971] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.181972] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) [ 0.182134] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.182185] pci_bus 0000:00: on NUMA node 0 [ 0.182186] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.182600] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.182637] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.182673] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.182710] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.182745] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.182781] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.182817] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.182852] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.183002] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.183006] ACPI: \_SB_.PCI0: notify handler is installed [ 0.183044] Found 1 acpi root devices [ 0.183094] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.183095] vgaarb: loaded [ 0.183096] vgaarb: bridge control possible 0000:01:00.0 [ 0.183118] PCI: Using ACPI for IRQ routing [ 0.184510] PCI: pci_cache_line_size set to 64 bytes [ 0.184551] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.184552] e820: reserve RAM buffer [mem 0xddb2b000-0xdfffffff] [ 0.184554] e820: reserve RAM buffer [mem 0xdddb5000-0xdfffffff] [ 0.184555] e820: reserve RAM buffer [mem 0xdedce000-0xdfffffff] [ 0.184557] e820: reserve RAM buffer [mem 0xdf233000-0xdfffffff] [ 0.184558] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] [ 0.184559] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.184631] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.184635] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.186649] Switched to clocksource hpet [ 0.187629] pnp: PnP ACPI init [ 0.187635] ACPI: bus type PNP registered [ 0.187672] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.187674] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.187681] pnp 00:01: [dma 4] [ 0.187692] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.187704] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.187758] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.187786] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.187787] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.187789] system 00:04: [io 0xffff] has been reserved [ 0.187790] system 00:04: [io 0xffff] has been reserved [ 0.187791] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.187793] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.187794] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.187795] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.187797] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.187815] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.187844] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.187845] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.187925] system 00:07: [io 0x0a00-0x0a1f] has been reserved [ 0.187926] system 00:07: [io 0x0a30-0x0a3f] has been reserved [ 0.187928] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.188076] pnp 00:08: [dma 0 disabled] [ 0.188105] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.188135] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.188136] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.188152] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.188322] pnp 00:0b: [dma 3] [ 0.188388] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.188555] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.188556] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.188557] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.188559] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.188560] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.188562] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.188563] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.188564] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.188566] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 0.188567] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.188569] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.188658] pnp: PnP ACPI: found 13 devices [ 0.188659] ACPI: bus type PNP unregistered [ 0.188660] PnPBIOS: Disabled by ACPI PNP [ 0.224216] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.224218] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.224221] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.224223] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.224225] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.224235] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.224237] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.224241] pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.224247] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.224266] pci 0000:00:1c.3: PCI bridge to [bus 04-05] [ 0.224276] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.224277] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.224279] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.224280] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.224281] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.224282] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.224283] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.224284] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.224285] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.224286] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.224288] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.224289] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.224290] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.224291] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.224292] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.224293] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.224294] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.224296] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.224297] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.224298] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.224299] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.224300] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff] [ 0.224301] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.224302] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.224303] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.224340] NET: Registered protocol family 2 [ 0.224448] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.224459] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.224469] TCP: Hash tables configured (established 8192 bind 8192) [ 0.224475] TCP: reno registered [ 0.224476] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.224479] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.224518] NET: Registered protocol family 1 [ 0.224868] pci 0000:01:00.0: Boot video device [ 0.224875] PCI: CLS 64 bytes, default 64 [ 0.224897] Unpacking initramfs... [ 0.406973] Freeing initrd memory: 13444K (f65ae000 - f72cf000) [ 0.407136] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 0.407140] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 0.407145] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 0.407150] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 0.407185] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.407342] audit: initializing netlink socket (disabled) [ 0.407351] type=2000 audit(1393019903.396:1): initialized [ 0.415786] bounce pool size: 64 pages [ 0.415788] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.416239] VFS: Disk quotas dquot_6.5.2 [ 0.416257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.416309] msgmni has been set to 1627 [ 0.416507] alg: No test for stdrng (krng) [ 0.416523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.416548] io scheduler noop registered [ 0.416549] io scheduler deadline registered [ 0.416561] io scheduler cfq registered (default) [ 0.416680] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.416885] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.416893] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.416909] intel_idle: MWAIT substates: 0x1120 [ 0.416910] intel_idle: v0.4 model 0x2A [ 0.416911] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.416983] GHES: HEST is not enabled! [ 0.416990] isapnp: Scanning for PnP cards... [ 0.771012] isapnp: No Plug & Play device found [ 0.771082] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.791501] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.791967] Linux agpgart interface v0.103 [ 0.792056] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.792402] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.792405] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.792552] mousedev: PS/2 mouse device common for all mice [ 0.792578] rtc_cmos 00:05: RTC can wake from S4 [ 0.792720] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.792744] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.792749] Intel P-state driver initializing. [ 0.792755] Intel pstate controlling: cpu 0 [ 0.792763] Intel pstate controlling: cpu 1 [ 0.792770] Intel pstate controlling: cpu 2 [ 0.792776] Intel pstate controlling: cpu 3 [ 0.792863] TCP: cubic registered [ 0.793079] NET: Registered protocol family 10 [ 0.793274] mip6: Mobile IPv6 [ 0.793275] NET: Registered protocol family 17 [ 0.793277] mpls_gso: MPLS GSO support [ 0.793398] Using IPI No-Shortcut mode [ 0.793494] registered taskstats version 1 [ 0.794236] rtc_cmos 00:05: setting system clock to 2014-02-21 21:58:24 UTC (1393019904) [ 0.794267] PM: Hibernation image not present or could not be loaded. [ 0.794429] Freeing unused kernel memory: 520K (c15a5000 - c1627000) [ 0.794467] Write protecting the kernel text: 4136k [ 0.794514] Write protecting the kernel read-only data: 1268k [ 0.794515] NX-protecting the kernel data: 4056k [ 0.803075] systemd-udevd[68]: starting version 204 [ 0.823073] ACPI: Fan [FAN0] (off) [ 0.823096] ACPI: Fan [FAN1] (off) [ 0.823114] ACPI: Fan [FAN2] (off) [ 0.823130] ACPI: Fan [FAN3] (off) [ 0.823145] ACPI: Fan [FAN4] (off) [ 0.824501] ACPI: bus type USB registered [ 0.824516] usbcore: registered new interface driver usbfs [ 0.824521] usbcore: registered new interface driver hub [ 0.825773] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.825778] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.825782] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it! [ 0.825833] usbcore: registered new device driver usb [ 0.825989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.826063] ehci-pci: EHCI PCI platform driver [ 0.828574] SCSI subsystem initialized [ 0.829169] libata version 3.00 loaded. [ 0.833079] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.833086] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.833091] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.833103] ehci-pci 0000:00:1a.0: debug port 2 [ 0.833200] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 0.833286] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.833288] ACPI: Thermal Zone [TZ00] (28 C) [ 0.833341] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xf8228000, 8c:89:a5:c3:92:9c, XID 0c900800 IRQ 41 [ 0.833342] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.833431] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.833432] ACPI: Thermal Zone [TZ01] (30 C) [ 0.836991] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.837003] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f16000 [ 0.846333] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.846363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.846364] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.846365] usb usb1: Product: EHCI Host Controller [ 0.846366] usb usb1: Manufacturer: Linux 3.12-1-686-pae ehci_hcd [ 0.846367] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.846491] hub 1-0:1.0: USB hub found [ 0.846496] hub 1-0:1.0: 2 ports detected [ 0.846633] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.846637] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.846639] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.846649] ehci-pci 0000:00:1d.0: debug port 2 [ 0.850533] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.850543] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f15000 [ 0.862285] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.862305] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.862307] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.862315] usb usb2: Product: EHCI Host Controller [ 0.862316] usb usb2: Manufacturer: Linux 3.12-1-686-pae ehci_hcd [ 0.862317] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.862405] hub 2-0:1.0: USB hub found [ 0.862410] hub 2-0:1.0: 2 ports detected [ 0.862602] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.862605] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.862607] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.862709] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.862723] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 0.862973] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.862975] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.862976] usb usb3: Product: xHCI Host Controller [ 0.862977] usb usb3: Manufacturer: Linux 3.12-1-686-pae xhci_hcd [ 0.862978] usb usb3: SerialNumber: 0000:00:14.0 [ 0.863137] hub 3-0:1.0: USB hub found [ 0.863148] hub 3-0:1.0: 4 ports detected [ 0.863438] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.863440] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.863558] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.863560] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.863561] usb usb4: Product: xHCI Host Controller [ 0.863563] usb usb4: Manufacturer: Linux 3.12-1-686-pae xhci_hcd [ 0.863564] usb usb4: SerialNumber: 0000:00:14.0 [ 0.863635] hub 4-0:1.0: USB hub found [ 0.863642] hub 4-0:1.0: 4 ports detected [ 0.906276] ata_piix 0000:00:1f.2: version 2.13 [ 0.906352] ata_piix 0000:00:1f.2: MAP [ [ 0.906353] P0 P2 P1 P3 ] [ 1.062209] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.062672] scsi0 : ata_piix [ 1.063002] scsi1 : ata_piix [ 1.063061] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19 [ 1.063066] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19 [ 1.063199] ata_piix 0000:00:1f.5: MAP [ [ 1.063201] P0 -- P1 -- ] [ 1.158189] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.218101] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 1.218118] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.218537] scsi2 : ata_piix [ 1.218766] scsi3 : ata_piix [ 1.218816] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19 [ 1.218818] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19 [ 1.290444] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.290449] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.290896] hub 1-1:1.0: USB hub found [ 1.291082] hub 1-1:1.0: 6 ports detected [ 1.402055] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.405983] tsc: Refined TSC clocksource calibration: 3400.023 MHz [ 1.534325] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.534330] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.534741] hub 2-1:1.0: USB hub found [ 1.534932] hub 2-1:1.0: 8 ports detected [ 1.701887] usb 3-3: new full-speed USB device number 2 using xhci_hcd [ 1.718981] usb 3-3: New USB device found, idVendor=0556, idProduct=0001 [ 1.718986] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.718988] usb 3-3: Product: AK5370 [ 1.718998] usb 3-3: Manufacturer: AKM [ 1.789922] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.857793] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 1.857809] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 1.874852] ata1.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133 [ 1.874857] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.874863] ata1.01: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133 [ 1.882807] ata1.00: configured for UDMA/133 [ 1.886092] usb 1-1.1: New USB device found, idVendor=1532, idProduct=0029 [ 1.886097] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.886099] usb 1-1.1: Product: Razer DeathAdder [ 1.886102] usb 1-1.1: Manufacturer: Razer [ 1.888866] hidraw: raw HID events driver (C) Jiri Kosina [ 1.890922] usbcore: registered new interface driver usbhid [ 1.890924] usbhid: USB HID core driver [ 1.893232] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2 [ 1.893488] hid-generic 0003:1532:0029.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1a.0-1.1/input0 [ 1.897942] ata1.01: configured for UDMA/133 [ 1.900669] scsi 0:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5 [ 1.904506] scsi 0:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5 [ 1.957823] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 2.053245] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b [ 2.053250] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.053252] usb 1-1.3: Product: USB Receiver [ 2.053254] usb 1-1.3: Manufacturer: Logitech [ 2.063278] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input2 [ 2.066896] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/input/input3 [ 2.067036] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:1a.0-1.3:1 [ 2.129758] usb 1-1.5: new high-speed USB device number 5 using ehci-pci [ 2.223166] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0608 [ 2.223171] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.223173] usb 1-1.5: Product: USB2.0 Hub [ 2.223711] hub 1-1.5:1.0: USB hub found [ 2.224038] hub 1-1.5:1.0: 4 ports detected [ 2.297636] usb 2-1.6: new high-speed USB device number 3 using ehci-pci [ 2.393692] usb 2-1.6: New USB device found, idVendor=05e3, idProduct=0723 [ 2.393697] usb 2-1.6: New USB device strings: Mfr=3, Product=4, SerialNumber=0 [ 2.393699] usb 2-1.6: Product: USB Storage [ 2.393710] usb 2-1.6: Manufacturer: Generic [ 2.396984] usb-storage 2-1.6:1.0: USB Mass Storage device detected [ 2.397103] usb-storage 2-1.6:1.0: Quirks match for vid 05e3 pid 0723: 8000 [ 2.397190] scsi4 : usb-storage 2-1.6:1.0 [ 2.397252] usbcore: registered new interface driver usb-storage [ 2.405717] Switched to clocksource tsc [ 2.409398] ata2.01: failed to resume link (SControl 30) [ 2.497634] usb 1-1.5.4: new low-speed USB device number 6 using ehci-pci [ 2.565376] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.565389] ata2.01: SATA link down (SStatus 4 SControl 30) [ 2.574593] ata2.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133 [ 2.574597] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.582596] ata2.00: configured for UDMA/133 [ 2.582877] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 2.590292] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.590295] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.590340] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 2.590343] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.590407] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.590450] sd 0:0:0:0: [sda] Write Protect is off [ 2.590455] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.590478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.590500] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.590662] sd 1:0:0:0: [sdb] Write Protect is off [ 2.590665] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.590685] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.591890] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.591956] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 2.592019] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 2.608128] usb 1-1.5.4: New USB device found, idVendor=04d9, idProduct=1702 [ 2.608132] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.608134] usb 1-1.5.4: Product: USB Keyboard [ 2.608136] usb 1-1.5.4: Manufacturer: [ 2.611901] sdb: sdb1 sdb4 < sdb5 > [ 2.612578] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.618397] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input4 [ 2.618529] hid-generic 0003:04D9:1702.0006: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.0-1.5.4/input0 [ 2.635422] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.1/input/input5 [ 2.635536] hid-generic 0003:04D9:1702.0007: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1a.0-1.5.4/input1 [ 2.651212] sda: sda1 sda2 sda5 [ 2.666395] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.914687] device-mapper: uevent: version 1.0.3 [ 2.914734] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 2.930014] bio: create slab <bio-1> at 1 [ 3.016517] PM: Starting manual resume from disk [ 3.016520] PM: Hibernation image partition 8:5 present [ 3.016521] PM: Looking for hibernation image. [ 3.016739] PM: Image not found (code -22) [ 3.016741] PM: Hibernation image not present or could not be loaded. [ 3.033105] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 3.394544] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0 [ 3.394922] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 3.398357] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 4.073819] systemd-udevd[404]: starting version 204 [ 4.898464] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 4.898469] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.898472] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 4.898474] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.898475] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 4.898477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.898478] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.911624] mei_me 0000:00:16.0: setting latency timer to 64 [ 4.911652] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 4.931794] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 [ 4.931798] ACPI: Power Button [PWRB] [ 4.931825] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 4.931827] ACPI: Power Button [PWRF] [ 5.043579] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 5.043679] ACPI: Requesting acpi_cpufreq [ 5.093218] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 5.093241] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 5.093261] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 5.093277] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.093296] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.093312] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.093328] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.093343] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.094191] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 5.094193] hda-intel 0000:01:00.1: Force to non-snoop mode [ 5.094219] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5.107163] wmi: Mapper loaded [ 5.125553] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 5.125579] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 5.125599] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 5.125615] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 5.125632] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 5.125648] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 5.166080] parport_pc 00:0b: reported by Plug and Play ACPI [ 5.166127] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 5.215929] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.332915] ACPI Warning: 0x0000f000-0x0000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251) [ 5.332920] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.605580] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 5.605583] Disabling lock debugging due to kernel taint [ 5.611889] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7834 MBytes. [ 5.611992] <6>[fglrx] vendor: 1002 device: 683d count: 1 [ 5.612180] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 5.612337] <6>[fglrx] Kernel PAT support is enabled [ 5.612351] <6>[fglrx] module loaded - fglrx 13.35.5 [Jan 29 2014] with 1 minors [ 5.740693] iTCO_vendor_support: vendor-support=0 [ 5.748760] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.748789] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 5.748855] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.899205] alg: No test for crc32 (crc32-pclmul) [ 6.035229] usbcore: registered new interface driver snd-usb-audio [ 7.606796] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 7.762022] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 7.916146] Adding 3604476k swap on /dev/mapper/fedora00-swap. Priority:-1 extents:1 across:3604476k [ 7.917731] Adding 8339748k swap on /dev/sda5. Priority:-2 extents:1 across:8339748k [ 8.038694] fuse init (API version 7.22) [ 8.108853] EXT4-fs (sda1): Unrecognized mount option "x-gvfs-show" or missing value [ 8.205647] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered [ 8.717080] RPC: Registered named UNIX socket transport module. [ 8.717083] RPC: Registered udp transport module. [ 8.717083] RPC: Registered tcp transport module. [ 8.717084] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.733230] FS-Cache: Loaded [ 8.750549] FS-Cache: Netfs 'nfs' registered for caching [ 8.806635] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 10.235830] lp0: using parport0 (interrupt-driven). [ 10.257882] ppdev: user-space parallel port driver [ 11.836067] Bluetooth: Core ver 2.16 [ 11.836080] NET: Registered protocol family 31 [ 11.836081] Bluetooth: HCI device and connection manager initialized [ 11.836086] Bluetooth: HCI socket layer initialized [ 11.836088] Bluetooth: L2CAP socket layer initialized [ 11.836092] Bluetooth: SCO socket layer initialized [ 11.856469] Bluetooth: RFCOMM TTY layer initialized [ 11.856475] Bluetooth: RFCOMM socket layer initialized [ 11.856477] Bluetooth: RFCOMM ver 1.11 [ 11.880719] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.880722] Bluetooth: BNEP filters: protocol multicast [ 11.880726] Bluetooth: BNEP socket layer initialized [ 13.276610] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2) [ 13.277174] r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2) [ 13.289112] r8169 0000:03:00.0 eth0: link down [ 13.289137] r8169 0000:03:00.0 eth0: link down [ 13.289162] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.411746] r8169 0000:03:00.0 eth0: link up [ 15.411753] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.483549] systemd-logind[2768]: Watching system buttons on /dev/input/event5 (Power Button) [ 27.483608] systemd-logind[2768]: Watching system buttons on /dev/input/event4 (Power Button) [ 27.483634] systemd-logind[2768]: New seat seat0. [ 27.484277] systemd-logind[2768]: New session c1 of user oz.

Tu es sûr d’avoir viré le fichier /etc/X11/xorg.conf ?
Essaie plutôt xserver-xorg-video-radeon.

Oui je suis sûr. Et j’ai vérifié.

J’ai aussi essayé de réinstaller xserver-xorg-video-radeon. Après dernière mise à jour, j’arrive à l’écran «Ho no , something wrong…»

J’ai remarqué, à la fin des opérations d’apt-get, une dizaine de messages d’erreur comme ça:

Je ne sais pas ce que ça veut dire.

C’est qu’il te manque les firmwares realtek pour ta carte réseau (Ethernet ou Wifi).

Le paquet est: [mono]firmware-realtek[/mono].

Mais si tes cartes réseaux fonctionnent, tu peux ne pas en tenir compte.

Bon ben je vais réinstaller.

Ça m’embête, parce que ça risque de se reproduire. Faut que je me méfie plus des mises à jour.

Cette carte graphique commence vraiment à me fatiguer…