Beryl et carte ati

bonjour à tous :

j’ai une erreur de ce type après l’installationde beryl :

[code]debian:/etc/apt# beryl-manager
debian:/etc/apt# sh: glxinfo: command not found


  • Beryl system compatiblity check *

Detected xserver : AIGLX

Checking Display :0.0 …

Checking for XComposite extension : failed

No composite extension
beryl: SmcOpenConnection failed: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
beryl: No composite extension
[/code]


et voici mon fichier xorg.conf :

[code]

/etc/X11/xorg.conf (xorg X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the /etc/X11/xorg.conf manual page.

(Type “man /etc/X11/xorg.conf” at the shell prompt.)

This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section “Files”

FontPath “/usr/share/fonts/X11/misc”

FontPath “/usr/X11R6/lib/X11/fonts/misc”

FontPath “/usr/share/fonts/X11/cyrillic”

FontPath “/usr/X11R6/lib/X11/fonts/cyrillic”

FontPath “/usr/share/fonts/X11/100dpi/:unscaled”

FontPath “/usr/X11R6/lib/X11/fonts/100dpi/:unscaled”

FontPath “/usr/share/fonts/X11/75dpi/:unscaled”

FontPath “/usr/X11R6/lib/X11/fonts/75dpi/:unscaled”

FontPath “/usr/share/fonts/X11/Type1”

FontPath “/usr/X11R6/lib/X11/fonts/Type1”

FontPath “/usr/share/fonts/X11/100dpi”

FontPath “/usr/X11R6/lib/X11/fonts/100dpi”

FontPath “/usr/share/fonts/X11/75dpi”

FontPath “/usr/X11R6/lib/X11/fonts/75dpi”

path to defoma fonts

FontPath “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”

EndSection

Section “Module”

Load “i2c”

Load “bitmap”

Load “ddc”

Load “dri”

Load “extmod”

Load “freetype”

Load “glx”

Load “int10”

Load “vbe”

EndSection

Section “InputDevice”

Identifier “Generic Keyboard”

Driver “kbd”

Option “CoreKeyboard”

Option “XkbRules” “xorg”

Option “XkbModel” “pc105”

Option “XkbLayout” “fr”

Option “XkbVariant” “latin9”

EndSection

Section “InputDevice”

Identifier “Configured Mouse”

Driver “mouse”

Option “CorePointer”

Option “Device” “/dev/input/mice”

Option “Protocol” “ImPS/2”

Option “Emulate3Buttons” “true”

EndSection

Section “Device”

Identifier “ATI Technologies Inc Radeon Mobility X700 (PCIE)”

Driver “fglrx”

BusID “PCI:1:0:0”

Option “XAANoOffscreenPixmaps” “true”

    Option "AddARGBGLXVisuals" "On"

EndSection

Section “Monitor”

Identifier “Écran générique”

Option “DPMS”

HorizSync 28-95

VertRefresh 50-75

EndSection

Section “Screen”

Identifier “Default Screen”

Device “ATI Technologies Inc Radeon Mobility X700 (PCIE)”

Monitor “Écran générique”

DefaultDepth 24

SubSection “Display”

Depth 1

Modes “1280x800” “1024x768”

EndSubSection

SubSection “Display”

Depth 4

Modes “1280x800” “1024x768”

EndSubSection

SubSection “Display”

Depth 8

Modes “1280x800” “1024x768”

EndSubSection

SubSection “Display”

Depth 15

Modes “1280x800” “1024x768”

EndSubSection

SubSection “Display”

Depth 16

Modes “1280x800” “1024x768”

EndSubSection

SubSection “Display”

Depth 24

Modes “1280x800” “1024x768”

EndSubSection

EndSection

Section “ServerLayout”

Identifier “Default Layout”

Screen “Default Screen”

InputDevice “Generic Keyboard”

InputDevice “Configured Mouse”

EndSection

Section “DRI”

Mode 0666

EndSection

Section “Extensions”

Option “Composite” “Enable”

EndSection[/code]

Quelqu’un aurait une idée ?sachant que :

[quote]
No composite extension
beryl: SmcOpenConnection failed: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
beryl: No composite extension[/quote]

[quote]Section “Extensions”

Option “Composite” “Enable”[/quote]

le problême vient du fait comme de nombreuses personnes sur ce forum , que tu essayes de faire tourner les drivers ati proprios (fglrx) avec les composites , ces derniers étant extrêmement unstable avec les drivers proprios (si ce n’est pas innutilisable), ayant moi même une ati radeon 9600 pro , je te conseil si la tienne est surportée avec les drivers LIBRE (les drivers ati xorg installés normalement par defaut que tu sois en sarge ou etch , corrigez moi surtout si je me trompe :wink: ), et essayes de configurer beryl avec AIGLX c’est à dire l’accélaration Indirect du glx (pseudo glx ) géré par Xorg , qui marche extrêmement bien avec une ati , trés rapide , trés fluide (surtout beryl 0.2.0 piouu :smiley: )

pour Etch ajoutes ce depot :

http://debian.beryl-project.org/ etch main

concernant la configuration prés et post install , je te conseil ce wiki :
http://wiki.beryl-project.org/index.php/Install/Debian

si tu as un problême bleme me :wink:

ou aussi

forum.ubuntu-fr.org/viewtopic.php?id=82776
help.ubuntu.com/community/RadeonDriver

j’ai utilisé ces post pour faire fonctionner beryl sur mon portable avec amd64+ati et AIGLX

:smiley: