Blocage a cause du noyeau 3.2.0-4-686-pae

Support Debian
#1

Bonjour a tous,

Je suis sous wheezy, et depuis une dernière mise a jour (il y a bien deux semaines, mais je n’ai pas eu le temps de me renseigner sur mon soucis) j’ai un soucis de démarrage, dès GRUB : Si je laisse le pc faire, il démarre sur le noyeau 3.2.0-4-686-pae , j’ai un peu d’affichage texte, et à priori au chargement de GDM … mes écrans s’éteignent, plus de réaction (!)

Par contre mon pc fonctionne très bien en 3.2.0-3-686-pae …

LSPCI
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 Display controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce GT 120] (rev a1)
03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

le syslog est super long … j’hésite à le poster ici.

Auriez vous une idée de la raison de ce plantage (c’est juste embétant de devoir rester devant le pc, attendre le post, et penser a appuyer sur une touche fléché pour ne pas avoir a forcer un redémarrage…)
?

Merci

#2

Pilote graphique Nvidia propriétaire, je présume ? A recompiler/réinstaller pour chaque nouvelle version de noyau.

#3

Ça sent en effet le problème de pilotes. : isalo.org/wiki.debian-fr/In … _privateur

Pour ça tu as la balise Code , ou bien les pastebin : paste.debian.net/

#4

De toute façon le syslog ne contiendra pas grand-chose d’intéressant, ou alors juste vers la fin. Par contre jeter un coup d’oeil au log de X.org.

#5

Bonjour a tous,

je n’utilise pas de pilote propriétaire : je ne sais pas comment faire, et j’ai laissé debian se débrouiller tout seul pour l’installation. j’en suis au 3e ou 4e noyeau mis à jour, jusque là tout se passait bien.

J’ai mis le x.org.log qui me pose soucis :

[code]
[ 29543.479]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 29543.479] X Protocol Version 11, Revision 0
[ 29543.479] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 29543.479] Current Operating System: Linux bureau 3.2.0-3-686-pae #1 SMP Mon Jul 23 03:50:34 UTC 2012 i686
[ 29543.479] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=4cb9bb84-33bc-43bd-b905-6994a2b5438b ro quiet
[ 29543.479] Build Date: 17 April 2013 11:13:16AM
[ 29543.479] xorg-server 2:1.12.4-6 (Julien Cristau jcristau@debian.org)
[ 29543.479] Current version of pixman: 0.26.0
[ 29543.479] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29543.479] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29543.479] (==) Log file: “/var/log/Xorg.0.log”, Time: Sun May 26 18:26:25 2013
[ 29543.480] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 29543.481] (==) No Layout section. Using the first Screen section.
[ 29543.481] (==) No screen section available. Using defaults.
[ 29543.481] () |–>Screen “Default Screen Section” (0)
[ 29543.481] (**) | |–>Monitor “”
[ 29543.481] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[ 29543.481] (==) Automatically adding devices
[ 29543.481] (==) Automatically enabling devices
[ 29543.481] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
[ 29543.481] Entry deleted from font path.
[ 29543.481] (WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
[ 29543.481] Entry deleted from font path.
[ 29543.481] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 29543.481] (==) ModulePath set to “/usr/lib/xorg/modules”
[ 29543.481] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 29543.481] (II) Loader magic: 0xb770c5a0
[ 29543.481] (II) Module ABI versions:
[ 29543.481] X.Org ANSI C Emulation: 0.4
[ 29543.481] X.Org Video Driver: 12.1
[ 29543.481] X.Org XInput driver : 16.0
[ 29543.481] X.Org Server Extension : 6.0
[ 29543.482] (–) PCI: (0:0:2:0) 8086:0102:1462:7740 rev 9, Mem @ 0xfb400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 29543.482] (–) PCI:*(0:1:0:0) 10de:0646:1462:133f rev 161, Mem @ 0xfa000000/16777216, 0xc0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x???/524288
[ 29543.482] (II) Open ACPI successful (/var/run/acpid.socket)
[ 29543.482] (II) LoadModule: “extmod”
[ 29543.483] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 29543.483] (II) Module extmod: vendor=“X.Org Foundation”
[ 29543.483] compiled for 1.12.4, module version = 1.0.0
[ 29543.483] Module class: X.Org Server Extension
[ 29543.483] ABI class: X.Org Server Extension, version 6.0
[ 29543.483] (II) Loading extension SELinux
[ 29543.483] (II) Loading extension MIT-SCREEN-SAVER
[ 29543.483] (II) Loading extension XFree86-VidModeExtension
[ 29543.483] (II) Loading extension XFree86-DGA
[ 29543.483] (II) Loading extension DPMS
[ 29543.483] (II) Loading extension XVideo
[ 29543.483] (II) Loading extension XVideo-MotionCompensation
[ 29543.483] (II) Loading extension X-Resource
[ 29543.483] (II) LoadModule: “dbe”
[ 29543.483] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 29543.483] (II) Module dbe: vendor=“X.Org Foundation”
[ 29543.483] compiled for 1.12.4, module version = 1.0.0
[ 29543.483] Module class: X.Org Server Extension
[ 29543.483] ABI class: X.Org Server Extension, version 6.0
[ 29543.483] (II) Loading extension DOUBLE-BUFFER
[ 29543.483] (II) LoadModule: “glx”
[ 29543.483] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29543.484] (II) Module glx: vendor=“X.Org Foundation”
[ 29543.484] compiled for 1.12.4, module version = 1.0.0
[ 29543.484] ABI class: X.Org Server Extension, version 6.0
[ 29543.484] (==) AIGLX enabled
[ 29543.484] (II) Loading extension GLX
[ 29543.484] (II) LoadModule: “record”
[ 29543.484] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29543.484] (II) Module record: vendor=“X.Org Foundation”
[ 29543.484] compiled for 1.12.4, module version = 1.13.0
[ 29543.484] Module class: X.Org Server Extension
[ 29543.484] ABI class: X.Org Server Extension, version 6.0
[ 29543.484] (II) Loading extension RECORD
[ 29543.484] (II) LoadModule: “dri”
[ 29543.484] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29543.484] (II) Module dri: vendor=“X.Org Foundation”
[ 29543.484] compiled for 1.12.4, module version = 1.0.0
[ 29543.484] ABI class: X.Org Server Extension, version 6.0
[ 29543.484] (II) Loading extension XFree86-DRI
[ 29543.484] (II) LoadModule: “dri2”
[ 29543.484] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29543.485] (II) Module dri2: vendor=“X.Org Foundation”
[ 29543.485] compiled for 1.12.4, module version = 1.2.0
[ 29543.485] ABI class: X.Org Server Extension, version 6.0
[ 29543.485] (II) Loading extension DRI2
[ 29543.485] (==) Matched nouveau as autoconfigured driver 0
[ 29543.485] (==) Matched nv as autoconfigured driver 1
[ 29543.485] (==) Matched vesa as autoconfigured driver 2
[ 29543.485] (==) Matched fbdev as autoconfigured driver 3
[ 29543.485] (==) Assigned the driver to the xf86ConfigLayout
[ 29543.485] (II) LoadModule: “nouveau”
[ 29543.485] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 29543.485] (II) Module nouveau: vendor=“X.Org Foundation”
[ 29543.485] compiled for 1.12.4, module version = 1.0.1
[ 29543.485] Module class: X.Org Video Driver
[ 29543.485] ABI class: X.Org Video Driver, version 12.1
[ 29543.485] (II) LoadModule: “nv”
[ 29543.485] (WW) Warning, couldn’t open module nv
[ 29543.485] (II) UnloadModule: “nv”
[ 29543.485] (II) Unloading nv
[ 29543.485] (EE) Failed to load module “nv” (module does not exist, 0)
[ 29543.485] (II) LoadModule: “vesa”
[ 29543.486] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 29543.486] (II) Module vesa: vendor=“X.Org Foundation”
[ 29543.486] compiled for 1.12.1, module version = 2.3.1
[ 29543.486] Module class: X.Org Video Driver
[ 29543.486] ABI class: X.Org Video Driver, version 12.0
[ 29543.486] (II) LoadModule: “fbdev”
[ 29543.487] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 29543.487] (II) Module fbdev: vendor=“X.Org Foundation”
[ 29543.487] compiled for 1.12.1, module version = 0.4.2
[ 29543.487] ABI class: X.Org Video Driver, version 12.0
[ 29543.487] (II) NOUVEAU driver Date: Fri Jul 6 16:23:50 2012 +1000
[ 29543.487] (II) NOUVEAU driver for NVIDIA chipset families :
[ 29543.487] RIVA TNT (NV04)
[ 29543.487] RIVA TNT2 (NV05)
[ 29543.487] GeForce 256 (NV10)
[ 29543.487] GeForce 2 (NV11, NV15)
[ 29543.487] GeForce 4MX (NV17, NV18)
[ 29543.487] GeForce 3 (NV20)
[ 29543.487] GeForce 4Ti (NV25, NV28)
[ 29543.487] GeForce FX (NV3x)
[ 29543.487] GeForce 6 (NV4x)
[ 29543.487] GeForce 7 (G7x)
[ 29543.487] GeForce 8 (G8x)
[ 29543.487] GeForce GTX 200 (NVA0)
[ 29543.487] GeForce GTX 400 (NVC0)
[ 29543.487] (II) VESA: driver for VESA chipsets: vesa
[ 29543.487] (II) FBDEV: driver for framebuffer: fbdev
[ 29543.487] (++) using VT number 8

[ 29543.489] drmOpenDevice: node name is /dev/dri/card0
[ 29543.489] drmOpenDevice: open result is 8, (OK)
[ 29543.489] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 29543.489] drmOpenDevice: node name is /dev/dri/card0
[ 29543.489] drmOpenDevice: open result is 8, (OK)
[ 29543.489] drmOpenByBusid: drmOpenMinor returns 8
[ 29543.489] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 29543.489] drmOpenDevice: node name is /dev/dri/card1
[ 29543.489] drmOpenDevice: open result is 8, (OK)
[ 29543.489] drmOpenByBusid: drmOpenMinor returns 8
[ 29543.489] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 29543.489] (II) [drm] nouveau interface version: 1.0.0
[ 29543.489] (WW) Falling back to old probe method for vesa
[ 29543.489] (WW) Falling back to old probe method for fbdev
[ 29543.489] (II) Loading sub module “fbdevhw”
[ 29543.489] (II) LoadModule: “fbdevhw”
[ 29543.489] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 29543.490] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 29543.490] compiled for 1.12.4, module version = 0.0.2
[ 29543.490] ABI class: X.Org Video Driver, version 12.1
[ 29543.490] (II) Loading sub module “dri”
[ 29543.490] (II) LoadModule: “dri”
[ 29543.490] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29543.490] (II) Module dri: vendor=“X.Org Foundation”
[ 29543.490] compiled for 1.12.4, module version = 1.0.0
[ 29543.490] ABI class: X.Org Server Extension, version 6.0
[ 29543.490] (II) NOUVEAU(0): Loaded DRI module
[ 29543.490] drmOpenDevice: node name is /dev/dri/card0
[ 29543.490] drmOpenDevice: open result is 9, (OK)
[ 29543.490] drmOpenDevice: node name is /dev/dri/card0
[ 29543.490] drmOpenDevice: open result is 9, (OK)
[ 29543.490] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 29543.490] drmOpenDevice: node name is /dev/dri/card0
[ 29543.490] drmOpenDevice: open result is 9, (OK)
[ 29543.490] drmOpenByBusid: drmOpenMinor returns 9
[ 29543.490] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 29543.490] drmOpenDevice: node name is /dev/dri/card1
[ 29543.490] drmOpenDevice: open result is 9, (OK)
[ 29543.490] drmOpenByBusid: drmOpenMinor returns 9
[ 29543.490] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 29543.490] (II) [drm] DRM interface version 1.4
[ 29543.490] (II) [drm] DRM open master succeeded.
[ 29543.490] (–) NOUVEAU(0): Chipset: “NVIDIA NV96”
[ 29543.490] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29543.490] (==) NOUVEAU(0): Depth 24, (–) framebuffer bpp 32
[ 29543.490] (==) NOUVEAU(0): RGB weight 888
[ 29543.490] (==) NOUVEAU(0): Default visual is TrueColor
[ 29543.490] (==) NOUVEAU(0): Using HW cursor
[ 29543.490] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 29543.490] (==) NOUVEAU(0): Page flipping enabled
[ 29543.490] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 29543.607] (II) NOUVEAU(0): Output VGA-2 has no monitor section
[ 29543.711] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 29543.719] (II) NOUVEAU(0): Output HDMI-3 has no monitor section
[ 29543.823] (II) NOUVEAU(0): EDID for output VGA-2
[ 29543.823] (II) NOUVEAU(0): Manufacturer: ACR Model: ad49 Serial#: 1905275121
[ 29543.823] (II) NOUVEAU(0): Year: 2007 Week: 19
[ 29543.823] (II) NOUVEAU(0): EDID Version: 1.3
[ 29543.823] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 29543.823] (II) NOUVEAU(0): Sync: Separate
[ 29543.823] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 29543.823] (II) NOUVEAU(0): Gamma: 2.07
[ 29543.823] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 29543.823] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 29543.823] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.286 greenY: 0.620
[ 29543.823] (II) NOUVEAU(0): blueX: 0.138 blueY: 0.076 whiteX: 0.312 whiteY: 0.328
[ 29543.823] (II) NOUVEAU(0): Supported established timings:
[ 29543.823] (II) NOUVEAU(0): 720x400@70Hz
[ 29543.823] (II) NOUVEAU(0): 640x480@60Hz
[ 29543.823] (II) NOUVEAU(0): 640x480@67Hz
[ 29543.823] (II) NOUVEAU(0): 640x480@72Hz
[ 29543.823] (II) NOUVEAU(0): 640x480@75Hz
[ 29543.823] (II) NOUVEAU(0): 800x600@56Hz
[ 29543.823] (II) NOUVEAU(0): 800x600@60Hz
[ 29543.823] (II) NOUVEAU(0): 800x600@72Hz
[ 29543.823] (II) NOUVEAU(0): 800x600@75Hz
[ 29543.823] (II) NOUVEAU(0): 832x624@75Hz
[ 29543.823] (II) NOUVEAU(0): 1024x768@60Hz
[ 29543.823] (II) NOUVEAU(0): 1024x768@70Hz
[ 29543.823] (II) NOUVEAU(0): 1024x768@75Hz
[ 29543.823] (II) NOUVEAU(0): 1280x1024@75Hz
[ 29543.823] (II) NOUVEAU(0): Manufacturer’s mask: 0
[ 29543.823] (II) NOUVEAU(0): Supported standard timings:
[ 29543.823] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 29543.823] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 29543.823] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 29543.823] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 29543.823] (II) NOUVEAU(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 29543.823] (II) NOUVEAU(0): #5: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 29543.823] (II) NOUVEAU(0): #6: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 29543.823] (II) NOUVEAU(0): #7: hsize: 800 vsize 600 refresh: 60 vid: 16453
[ 29543.823] (II) NOUVEAU(0): Supported detailed timing:
[ 29543.823] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 29543.823] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 29543.823] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 29543.823] (II) NOUVEAU(0): Serial No: L49086694237
[ 29543.823] (II) NOUVEAU(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 29543.823] (II) NOUVEAU(0): Monitor name: Acer AL1916
[ 29543.823] (II) NOUVEAU(0): EDID (in hex):
[ 29543.823] (II) NOUVEAU(0): 00ffffffffffff00047249adf1309071
[ 29543.823] (II) NOUVEAU(0): 1311010368261e6b2a6760a25a499e23
[ 29543.823] (II) NOUVEAU(0): 135054bfef00818f8180714f7140614f
[ 29543.823] (II) NOUVEAU(0): 6140454f4540302a009851002a403070
[ 29543.823] (II) NOUVEAU(0): 1300782d1100001e000000ff004c3439
[ 29543.823] (II) NOUVEAU(0): 3038363639343233370a000000fd0037
[ 29543.823] (II) NOUVEAU(0): 4b1e530e000a202020202020000000fc
[ 29543.823] (II) NOUVEAU(0): 004163657220414c313931360a200037
[ 29543.823] (II) NOUVEAU(0): EDID vendor “ACR”, prod id 44361
[ 29543.823] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 29543.823] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 29543.823] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 29543.823] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 29543.823] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 29543.823] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 29543.824] (II) NOUVEAU(0): Printing probed modes for output VGA-2
[ 29543.824] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 29543.824] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 29543.824] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29543.824] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29544.036] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 29544.036] (II) NOUVEAU(0): Manufacturer: ACR Model: ad49 Serial#: 1905274959
[ 29544.036] (II) NOUVEAU(0): Year: 2007 Week: 19
[ 29544.036] (II) NOUVEAU(0): EDID Version: 1.3
[ 29544.036] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 29544.036] (II) NOUVEAU(0): Sync: Separate
[ 29544.036] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 29544.036] (II) NOUVEAU(0): Gamma: 2.07
[ 29544.036] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 29544.036] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 29544.036] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.286 greenY: 0.620
[ 29544.036] (II) NOUVEAU(0): blueX: 0.138 blueY: 0.076 whiteX: 0.312 whiteY: 0.328
[ 29544.036] (II) NOUVEAU(0): Supported established timings:
[ 29544.036] (II) NOUVEAU(0): 720x400@70Hz
[ 29544.036] (II) NOUVEAU(0): 640x480@60Hz
[ 29544.036] (II) NOUVEAU(0): 640x480@67Hz
[ 29544.036] (II) NOUVEAU(0): 640x480@72Hz
[ 29544.036] (II) NOUVEAU(0): 640x480@75Hz
[ 29544.036] (II) NOUVEAU(0): 800x600@56Hz
[ 29544.036] (II) NOUVEAU(0): 800x600@60Hz
[ 29544.036] (II) NOUVEAU(0): 800x600@72Hz
[ 29544.036] (II) NOUVEAU(0): 800x600@75Hz
[ 29544.036] (II) NOUVEAU(0): 832x624@75Hz
[ 29544.036] (II) NOUVEAU(0): 1024x768@60Hz
[ 29544.036] (II) NOUVEAU(0): 1024x768@70Hz
[ 29544.036] (II) NOUVEAU(0): 1024x768@75Hz
[ 29544.036] (II) NOUVEAU(0): 1280x1024@75Hz
[ 29544.036] (II) NOUVEAU(0): Manufacturer’s mask: 0
[ 29544.036] (II) NOUVEAU(0): Supported standard timings:
[ 29544.036] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 29544.036] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 29544.036] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 29544.036] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 29544.036] (II) NOUVEAU(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 29544.036] (II) NOUVEAU(0): #5: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 29544.036] (II) NOUVEAU(0): #6: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 29544.036] (II) NOUVEAU(0): #7: hsize: 800 vsize 600 refresh: 60 vid: 16453
[ 29544.036] (II) NOUVEAU(0): Supported detailed timing:
[ 29544.036] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 29544.036] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 29544.036] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 29544.036] (II) NOUVEAU(0): Serial No: L49086694237
[ 29544.036] (II) NOUVEAU(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 29544.036] (II) NOUVEAU(0): Monitor name: Acer AL1916
[ 29544.036] (II) NOUVEAU(0): EDID (in hex):
[ 29544.036] (II) NOUVEAU(0): 00ffffffffffff00047249ad4f309071
[ 29544.036] (II) NOUVEAU(0): 1311010368261e6b2a6760a25a499e23
[ 29544.036] (II) NOUVEAU(0): 135054bfef00818f8180714f7140614f
[ 29544.036] (II) NOUVEAU(0): 6140454f4540302a009851002a403070
[ 29544.036] (II) NOUVEAU(0): 1300782d1100001e000000ff004c3439
[ 29544.036] (II) NOUVEAU(0): 3038363639343233370a000000fd0037
[ 29544.036] (II) NOUVEAU(0): 4b1e530e000a202020202020000000fc
[ 29544.036] (II) NOUVEAU(0): 004163657220414c313931360a2000d9
[ 29544.036] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 29544.036] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 29544.036] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 29544.036] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29544.036] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29544.044] (II) NOUVEAU(0): EDID for output HDMI-3
[ 29544.044] (II) NOUVEAU(0): Output VGA-2 connected
[ 29544.044] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 29544.044] (II) NOUVEAU(0): Output HDMI-3 disconnected
[ 29544.044] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 29544.044] (II) NOUVEAU(0): Output VGA-2 using initial mode 1280x1024
[ 29544.044] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x1024
[ 29544.044] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29544.044] (–) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 29544.044] () NOUVEAU(0): Driver mode “1280x1024”: 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 29544.044] () NOUVEAU(0): Driver mode “1280x1024”: 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “1152x864”: 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 29544.044] () NOUVEAU(0): Mode “1152x864”: 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 29544.044] () NOUVEAU(0): Driver mode “1024x768”: 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “1024x768”: 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “1024x768”: 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “1024x768”: 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “832x624”: 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “800x600”: 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “800x600”: 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “800x600”: 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “800x600”: 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “640x480”: 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “640x480”: 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “640x480”: 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “640x480”: 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29544.044] () NOUVEAU(0): Driver mode “720x400”: 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 29544.044] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29544.044] () NOUVEAU(0): Display dimensions: (380, 300) mm
[ 29544.044] () NOUVEAU(0): DPI set to (85, 86)
[ 29544.044] (II) Loading sub module “fb”
[ 29544.044] (II) LoadModule: “fb”
[ 29544.044] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29544.044] (II) Module fb: vendor=“X.Org Foundation”
[ 29544.044] compiled for 1.12.4, module version = 1.0.0
[ 29544.044] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29544.044] (II) Loading sub module “exa”
[ 29544.044] (II) LoadModule: “exa”
[ 29544.045] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 29544.045] (II) Module exa: vendor=“X.Org Foundation”
[ 29544.045] compiled for 1.12.4, module version = 2.5.0
[ 29544.045] ABI class: X.Org Video Driver, version 12.1
[ 29544.045] (II) Loading sub module “shadowfb”
[ 29544.045] (II) LoadModule: “shadowfb”
[ 29544.045] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 29544.045] (II) Module shadowfb: vendor=“X.Org Foundation”
[ 29544.045] compiled for 1.12.4, module version = 1.0.0
[ 29544.045] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29544.045] (II) UnloadModule: “vesa”
[ 29544.045] (II) Unloading vesa
[ 29544.045] (II) UnloadModule: “fbdev”
[ 29544.045] (II) Unloading fbdev
[ 29544.045] (II) UnloadSubModule: “fbdevhw”
[ 29544.045] (II) Unloading fbdevhw
[ 29544.045] (–) Depth 24 pixmap format is 32 bpp
[ 29544.046] (II) NOUVEAU(0): Opened GPU channel 2
[ 29544.051] (II) NOUVEAU(0): [DRI2] Setup complete
[ 29544.051] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 29544.051] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 29544.052] (II) EXA(0): Driver allocated offscreen pixmaps
[ 29544.052] (II) EXA(0): Driver registered support for the following operations:
[ 29544.052] (II) Solid
[ 29544.052] (II) Copy
[ 29544.052] (II) Composite (RENDER acceleration)
[ 29544.052] (II) UploadToScreen
[ 29544.052] (II) DownloadFromScreen
[ 29544.052] (==) NOUVEAU(0): Backing store disabled
[ 29544.052] (==) NOUVEAU(0): Silken mouse enabled
[ 29544.052] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 29544.052] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 29544.052] (==) NOUVEAU(0): DPMS enabled
[ 29544.052] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29544.053] (–) RandR disabled
[ 29544.053] (II) Initializing built-in extension Generic Event Extension
[ 29544.053] (II) Initializing built-in extension SHAPE
[ 29544.053] (II) Initializing built-in extension MIT-SHM
[ 29544.053] (II) Initializing built-in extension XInputExtension
[ 29544.053] (II) Initializing built-in extension XTEST
[ 29544.053] (II) Initializing built-in extension BIG-REQUESTS
[ 29544.053] (II) Initializing built-in extension SYNC
[ 29544.053] (II) Initializing built-in extension XKEYBOARD
[ 29544.053] (II) Initializing built-in extension XC-MISC
[ 29544.053] (II) Initializing built-in extension SECURITY
[ 29544.053] (II) Initializing built-in extension XINERAMA
[ 29544.053] (II) Initializing built-in extension XFIXES
[ 29544.053] (II) Initializing built-in extension RENDER
[ 29544.053] (II) Initializing built-in extension RANDR
[ 29544.053] (II) Initializing built-in extension COMPOSITE
[ 29544.053] (II) Initializing built-in extension DAMAGE
[ 29544.053] (II) SELinux: Disabled on system
[ 29544.073] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 29544.073] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 29544.073] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 29544.073] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 29544.073] (II) AIGLX: Loaded and initialized nouveau
[ 29544.073] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 29544.076] (II) NOUVEAU(0): NVEnterVT is called.
[ 29544.098] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 29544.098] resize called 1280 1024
[ 29544.138] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 29544.138] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 29544.138] (II) LoadModule: “evdev”
[ 29544.138] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29544.138] (II) Module evdev: vendor=“X.Org Foundation”
[ 29544.138] compiled for 1.12.1, module version = 2.7.0
[ 29544.138] Module class: X.Org XInput Driver
[ 29544.138] ABI class: X.Org XInput driver, version 16.0
[ 29544.138] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 29544.138] () Power Button: always reports core events
[ 29544.138] () evdev: Power Button: Device: “/dev/input/event4”
[ 29544.138] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 29544.138] (–) evdev: Power Button: Found keys
[ 29544.138] (II) evdev: Power Button: Configuring as keyboard
[ 29544.138] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4”
[ 29544.138] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
[ 29544.138] () Option “xkb_rules” “evdev”
[ 29544.138] () Option “xkb_model” “pc105”
[ 29544.138] () Option “xkb_layout” “fr”
[ 29544.138] () Option “xkb_variant” “latin9”
[ 29544.154] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 29544.155] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 29544.155] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 29544.155] () Power Button: always reports core events
[ 29544.155] () evdev: Power Button: Device: “/dev/input/event3”
[ 29544.155] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 29544.155] (–) evdev: Power Button: Found keys
[ 29544.155] (II) evdev: Power Button: Configuring as keyboard
[ 29544.155] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3”
[ 29544.155] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 7)
[ 29544.155] () Option “xkb_rules” “evdev”
[ 29544.155] () Option “xkb_model” “pc105”
[ 29544.155] () Option “xkb_layout” “fr”
[ 29544.155] () Option “xkb_variant” “latin9”
[ 29544.155] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6)
[ 29544.155] (II) No input driver specified, ignoring this device.
[ 29544.155] (II) This device may have been added with another device file.
[ 29544.155] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 29544.155] (II) No input driver specified, ignoring this device.
[ 29544.155] (II) This device may have been added with another device file.
[ 29544.155] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event0)
[ 29544.155] () CHICONY USB Keyboard: Applying InputClass “evdev keyboard catchall”
[ 29544.155] (II) Using input driver ‘evdev’ for ‘CHICONY USB Keyboard’
[ 29544.155] () CHICONY USB Keyboard: always reports core events
[ 29544.155] () evdev: CHICONY USB Keyboard: Device: “/dev/input/event0”
[ 29544.155] (–) evdev: CHICONY USB Keyboard: Vendor 0x4f2 Product 0x833
[ 29544.155] (–) evdev: CHICONY USB Keyboard: Found keys
[ 29544.155] (II) evdev: CHICONY USB Keyboard: Configuring as keyboard
[ 29544.155] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6.1/4-1.6.1:1.0/input/input0/event0”
[ 29544.155] (II) XINPUT: Adding extended input device “CHICONY USB Keyboard” (type: KEYBOARD, id 8)
[ 29544.155] () Option “xkb_rules” “evdev”
[ 29544.155] () Option “xkb_model” “pc105”
[ 29544.155] () Option “xkb_layout” “fr”
[ 29544.155] () Option “xkb_variant” “latin9”
[ 29544.156] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event1)
[ 29544.156] () CHICONY USB Keyboard: Applying InputClass “evdev keyboard catchall”
[ 29544.156] (II) Using input driver ‘evdev’ for ‘CHICONY USB Keyboard’
[ 29544.156] () CHICONY USB Keyboard: always reports core events
[ 29544.156] () evdev: CHICONY USB Keyboard: Device: “/dev/input/event1”
[ 29544.156] (–) evdev: CHICONY USB Keyboard: Vendor 0x4f2 Product 0x833
[ 29544.156] (–) evdev: CHICONY USB Keyboard: Found keys
[ 29544.156] (II) evdev: CHICONY USB Keyboard: Configuring as keyboard
[ 29544.156] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6.1/4-1.6.1:1.1/input/input1/event1”
[ 29544.156] (II) XINPUT: Adding extended input device “CHICONY USB Keyboard” (type: KEYBOARD, id 9)
[ 29544.156] () Option “xkb_rules” “evdev”
[ 29544.156] () Option “xkb_model” “pc105”
[ 29544.156] () Option “xkb_layout” “fr”
[ 29544.156] () Option “xkb_variant” “latin9”
[ 29544.156] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/event2)
[ 29544.156] () Logitech USB RECEIVER: Applying InputClass “evdev pointer catchall”
[ 29544.156] (II) Using input driver ‘evdev’ for ‘Logitech USB RECEIVER’
[ 29544.156] () Logitech USB RECEIVER: always reports core events
[ 29544.156] () evdev: Logitech USB RECEIVER: Device: “/dev/input/event2”
[ 29544.156] (–) evdev: Logitech USB RECEIVER: Vendor 0x46d Product 0xc50e
[ 29544.156] (–) evdev: Logitech USB RECEIVER: Found 20 mouse buttons
[ 29544.156] (–) evdev: Logitech USB RECEIVER: Found scroll wheel(s)
[ 29544.156] (–) evdev: Logitech USB RECEIVER: Found relative axes
[ 29544.156] (–) evdev: Logitech USB RECEIVER: Found x and y relative axes
[ 29544.157] (II) evdev: Logitech USB RECEIVER: Configuring as mouse
[ 29544.157] (II) evdev: Logitech USB RECEIVER: Adding scrollwheel support
[ 29544.157] () evdev: Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5
[ 29544.157] () evdev: Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29544.157] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6.2/4-1.6.2:1.0/input/input2/event2”
[ 29544.157] (II) XINPUT: Adding extended input device “Logitech USB RECEIVER” (type: MOUSE, id 10)
[ 29544.157] (II) evdev: Logitech USB RECEIVER: initialized for relative axes.
[ 29544.157] () Logitech USB RECEIVER: (accel) keeping acceleration scheme 1
[ 29544.157] () Logitech USB RECEIVER: (accel) acceleration profile 0
[ 29544.157] () Logitech USB RECEIVER: (accel) acceleration factor: 2.000
[ 29544.157] () Logitech USB RECEIVER: (accel) acceleration threshold: 4
[ 29544.157] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/mouse0)
[ 29544.157] (II) No input driver specified, ignoring this device.
[ 29544.157] (II) This device may have been added with another device file.
[ 29544.157] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 29544.157] (II) No input driver specified, ignoring this device.
[ 29544.157] (II) This device may have been added with another device file.
[ 29544.390] (II) NOUVEAU(0): EDID vendor “ACR”, prod id 44361
[ 29544.390] (II) NOUVEAU(0): Using hsync ranges from config file
[ 29544.390] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 29544.390] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 29544.390] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 29544.390] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 29544.390] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 29549.316] (II) evdev: Power Button: Close
[ 29549.316] (II) UnloadModule: “evdev”
[ 29549.332] (II) evdev: Power Button: Close
[ 29549.332] (II) UnloadModule: “evdev”
[ 29549.368] (II) evdev: CHICONY USB Keyboard: Close
[ 29549.368] (II) UnloadModule: “evdev”
[ 29549.408] (II) evdev: CHICONY USB Keyboard: Close
[ 29549.408] (II) UnloadModule: “evdev”
[ 29549.440] (II) evdev: Logitech USB RECEIVER: Close
[ 29549.440] (II) UnloadModule: “evdev”
[ 29549.446] (II) NOUVEAU(0): NVLeaveVT is called.
[ 29549.452] (II) NOUVEAU(0): Closed GPU channel 2
[ 29549.481] Server terminated successfully (0). Closing log file.[/code]

si quelqu’un a une idée, je suis preneur, merci d’avance

#6

Ben là tout va bien, mais si on regarde il s’agit du BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae donc pas du noyau posant pbm. Il faudrait récupérer le xorg.0.log avec le noyau 3.2.0-4. Effectivement c’est une carte nvidia.

#7

ah ben zut, c’était pourtant le fichier de log “old” que j’avais mis en ligne …
je pige pas. A moins que çà coince AVANT le chargement de X ???

#8

UP

y a t-il un moyen de “forcer” le démarrage sur un noyau plutot qu’un autre ?

Merci

#9

quand la machine boot elle même sur le noyau 3.2.0-4-686-pae peux tu accéder au mode console avec Ctrl+Alt+F1?Si oui installe le pilote proprio en suivant le lien indiqué par thuban,la méthode pour les fainéants basée sur smxi.
Après installation du nouveau noyau as tu fait la commande “#update-grub” ? qui te donnera le choix du noyau au moment du boot

#10

[quote=“lechatsauvage”]ah ben zut, c’était pourtant le fichier de log “old” que j’avais mis en ligne …
je pige pas. A moins que çà coince AVANT le chargement de X ???[/quote]
Vérifie avec la date et l’heure du fichier.

On peut spécifier le numéro d’ordre (à partir de 0) de l’entrée de menu par défaut dans /etc/default/grub puis exécuter update-grub pour l’appliquer.

#11

J’ai suivi la méthode d’installation (j’avais un pilote libre, je suis maintenant avec le pilote proprio). Il y a une différence maintenant : j’arrive au prompt avec le noyau 3.2.0-4-686-pae et en GRANDS caractères (genre en 640x480) aulieu d’un “_” clignotant …

Du coup, nouvelle question : Comment peut-on changer la taille du caractère dans TTY1 ?

non, je ne connaissais pas … :blush:

[quote=“lechatsauvage”]y a t-il un moyen de “forcer” le démarrage sur un noyau plutot qu’un autre ?

Ah oki, je vais tenter, celà, merci :slightly_smiling:

#12

[quote=“lechatsauvage”]y a t-il un moyen de “forcer” le démarrage sur un noyau plutot qu’un autre ?

Ah oki, je vais tenter, celà, merci :slightly_smiling:[/quote]

YES, problème esquivé, merci :smiley: