Bloquer sur écran choix d'utilisateurs

Bonjour,

Je suis nouveau sur Debian, il s’agit de ma première installation Debian car je suis utilisateur de Archlinux. Alors voilà pour lancer Debian je me sers de grub (de Archlinux) qui est sur une partition primaire Boot, la racine Debian le home et le swap sont installer sur des partitions logiques. Quand je lance Debian j’arrive à l’écran de choix d’utilisateurs et là ça bloque, je ne peux rien faire je suis obligé de faire un reboot sur la tour car tout est bloqué. Je peux démarrer en init 1 uniquement et quand je tape startx pour lancer la session même problème ça plante je ne peux plus rien faire à part un reboot de la tour. Est-ce que quelqu’un aurait une idée d’où vient le problème?

Cordialement.

PS: je sais que je donne très peu d’informations mais le problème c’est que j’ai pas grand chose, quand je fais startx j’arrive sur le bureau aucun message, mais tout est bloqué clavier et souris bloqué je ne peux rien faire. J’utilise Debian 6.0.4 en 64 bits pour les partitions j’ai le boot en partition primaire sur sdc3 en ext3, racine et home debian en ext4 partitions logiques sur sdc5 pour racine et sda 8 pour home.

tu es sous quel environnement ?
lécran de connexion est GDM KDM autre…?
tu as créé un utilisateur ?

Merci de t’intéresser à mon problème, alors en faite ce problème est survenue juste après l’installation de base. L’écran de connexion est gdm, environnement de bureau gnome et oui j’ai créer un utilisateur pendant l’installation. J’ai l’impression que le problème vient de l’interface graphique car dès que gdm apparaît tout bloque, et quand je fais startx pour arriver directement sur le bureau tout bloque. Est-ce qu’il y a des logs que je peux poster pour aider?

il serait intéressant de voir le démarrage

si tu peux y accéder via init 1 ou un liveCD

Désolé pour l’attente j’ai du m’absenter, alors voilà le contenu dmesg :

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Mon May 7 19:57:51 CEST 2012 [ 0.000000] Command line: root=/dev/sdc5 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f790000 (usable) [ 0.000000] BIOS-e820: 000000007f790000 - 000000007f7e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7e3000 - 000000007f7f0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f7f0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000200000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: OEM OEM/EVGA X58 3x SLI Classified 3, BIOS 6.00 PG 08/25/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x200000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 080000000 mask F80000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7f790 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5a70] f5a70 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000007f790000 [ 0.000000] 0000000000 - 007f600000 page 2M [ 0.000000] 007f600000 - 007f790000 page 4k [ 0.000000] kernel direct mapping tables up to 7f790000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000200000000 [ 0.000000] 0100000000 - 0200000000 page 2M [ 0.000000] kernel direct mapping tables up to 200000000 @ 7f787000-7f790000 [ 0.000000] RAMDISK: 37d12000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f9cb0 00024 (v02 IntelR) [ 0.000000] ACPI: XSDT 000000007f7e3080 0005C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007f7e9780 000F4 (v03 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20120111/tbfadt-579) [ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20120111/tbfadt-629) [ 0.000000] ACPI: DSDT 000000007f7e3200 05D3F (v01 INTELR AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007f790000 00040 [ 0.000000] ACPI: HJKL 000000007f7e8f40 00400 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: ZXCV 000000007f7e9340 00424 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: HPET 000000007f7e99c0 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 000000007f7e9a00 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007f7e9880 0012C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 000000007f7e9a40 00E4C (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000200000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000200000000 [ 0.000000] NODE_DATA [00000001ffffb000 - 00000001ffffffff] [ 0.000000] [ffffea0000000000-ffffea0007ffffff] PMD -> [ffff8801f9600000-ffff8801ff5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00200000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x0007f790 [ 0.000000] 0: 0x00100000 -> 0x00200000 [ 0.000000] On node 0 totalpages: 1570588 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 501712 pages, LIFO batch:31 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1032192 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x10] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 16, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007f790000 - 000000007f7e3000 [ 0.000000] PM: Registered nosave memory: 000000007f7e3000 - 000000007f7f0000 [ 0.000000] PM: Registered nosave memory: 000000007f7f0000 - 0000000080000000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801ffc00000 s82176 r8192 d24320 u131072 [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1537815 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sdc5 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 6102096k/8388608k available (4495k kernel code, 2106256k absent, 180256k reserved, 4327k data, 732k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:808 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 25165824 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.003333] Detected 4001.212 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 8005.85 BogoMIPS (lpj=13337373) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000021] Security Framework initialized [ 0.000023] AppArmor: AppArmor disabled by boot time parameter [ 0.000415] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.001457] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001872] Mount-cache hash table entries: 256 [ 0.001954] Initializing cgroup subsys cpuacct [ 0.001956] Initializing cgroup subsys memory [ 0.001961] Initializing cgroup subsys devices [ 0.001962] Initializing cgroup subsys freezer [ 0.001963] Initializing cgroup subsys net_cls [ 0.001964] Initializing cgroup subsys blkio [ 0.001982] CPU: Physical Processor ID: 0 [ 0.001983] CPU: Processor Core ID: 0 [ 0.001985] mce: CPU supports 9 MCE banks [ 0.001992] CPU0: Thermal monitoring enabled (TM1) [ 0.001997] using mwait in idle threads. [ 0.002594] ACPI: Core revision 20120111 [ 0.005785] ftrace: allocating 17484 entries in 69 pages [ 0.011572] Switched APIC routing to physical flat. [ 0.011968] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044852] CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.148827] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. [ 0.148830] CPU erratum AAJ80 worked around [ 0.148831] CPUID marked event: 'bus cycles' unavailable [ 0.148832] ... version: 3 [ 0.148833] ... bit width: 48 [ 0.148834] ... generic registers: 4 [ 0.148834] ... value mask: 0000ffffffffffff [ 0.148835] ... max period: 000000007fffffff [ 0.148836] ... fixed-purpose events: 3 [ 0.148836] ... event mask: 000000070000000f [ 0.314994] NMI watchdog enabled, takes one hw-pmu counter. [ 0.341452] Booting Node 0, Processors #1 [ 0.341453] smpboot cpu 1: start_ip = 97000 [ 0.372582] NMI watchdog enabled, takes one hw-pmu counter. [ 0.391277] #2 [ 0.391278] smpboot cpu 2: start_ip = 97000 [ 0.422402] NMI watchdog enabled, takes one hw-pmu counter. [ 0.441089] #3 [ 0.441090] smpboot cpu 3: start_ip = 97000 [ 0.472214] NMI watchdog enabled, takes one hw-pmu counter. [ 0.477610] Brought up 4 CPUs [ 0.477612] Total of 4 processors activated (32022.43 BogoMIPS). [ 0.479625] devtmpfs: initialized [ 0.480460] PM: Registering ACPI NVS region at 7f790000 (339968 bytes) [ 0.480942] NET: Registered protocol family 16 [ 0.481004] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.481005] ACPI: bus type pci registered [ 0.481051] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.481052] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.499617] PCI: Using configuration type 1 for base access [ 0.499914] bio: create slab <bio-0> at 0 [ 0.499946] ACPI: Added _OSI(Module Device) [ 0.499947] ACPI: Added _OSI(Processor Device) [ 0.499948] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.499949] ACPI: Added _OSI(Processor Aggregator Device) [ 0.500470] ACPI: EC: Look up EC in DSDT [ 0.503117] ACPI: Interpreter enabled [ 0.503119] ACPI: (supports S0 S1 S4 S5) [ 0.503128] ACPI: Using IOAPIC for interrupt routing [ 0.505505] ACPI: No dock devices found. [ 0.505507] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.505591] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.505642] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.505643] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.505644] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.505645] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.505647] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.505672] PCI host bridge to bus 0000:00 [ 0.505673] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.505674] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.505675] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.505676] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.505677] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.505686] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600 [ 0.505723] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.505739] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 0.505777] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.505792] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604 [ 0.505829] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.505844] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 0.505881] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.505901] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604 [ 0.505939] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.505958] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 0.505995] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.506011] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 0.506049] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.506069] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 0.506115] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 0.506159] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 0.506201] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 0.506252] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 0.506289] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 0.506332] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 0.506368] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 0.506411] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 0.506448] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 0.506498] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 0.506519] pci 0000:00:1a.7: reg 10: [mem 0xf3ffe000-0xf3ffe3ff] [ 0.506595] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.506618] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 0.506629] pci 0000:00:1b.0: reg 10: [mem 0xf3ff4000-0xf3ff7fff 64bit] [ 0.506685] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.506706] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 0.506763] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.506784] pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604 [ 0.506841] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.506863] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 0.506920] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.506943] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 0.506980] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 0.507023] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 0.507060] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 0.507103] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 0.507139] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 0.507190] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 0.507210] pci 0000:00:1d.7: reg 10: [mem 0xf3ffd000-0xf3ffd3ff] [ 0.507286] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.507306] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.507361] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 0.507433] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 0007) [ 0.507476] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 0.507493] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907] [ 0.507503] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803] [ 0.507509] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707] [ 0.507518] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603] [ 0.507524] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f] [ 0.507533] pci 0000:00:1f.2: reg 24: [mem 0xf3ffc000-0xf3ffc7ff] [ 0.507568] pci 0000:00:1f.2: PME# supported from D3hot [ 0.507585] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 0.507600] pci 0000:00:1f.3: reg 10: [mem 0xf3ffb000-0xf3ffb0ff 64bit] [ 0.507620] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.507674] pci 0000:01:00.0: [1033:0194] type 0 class 0x000c03 [ 0.507686] pci 0000:01:00.0: reg 10: [mem 0xf3afe000-0xf3afffff 64bit] [ 0.507751] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.515389] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.515392] pci 0000:00:01.0: bridge window [mem 0xf3a00000-0xf3afffff] [ 0.515426] pci 0000:02:00.0: [1b4b:9123] type 0 class 0x000106 [ 0.515434] pci 0000:02:00.0: reg 10: [io 0xbf00-0xbf07] [ 0.515439] pci 0000:02:00.0: reg 14: [io 0xbe00-0xbe03] [ 0.515444] pci 0000:02:00.0: reg 18: [io 0xbd00-0xbd07] [ 0.515450] pci 0000:02:00.0: reg 1c: [io 0xbc00-0xbc03] [ 0.515455] pci 0000:02:00.0: reg 20: [io 0xbb00-0xbb0f] [ 0.515461] pci 0000:02:00.0: reg 24: [mem 0xf3cff000-0xf3cff7ff] [ 0.515466] pci 0000:02:00.0: reg 30: [mem 0xf3ce0000-0xf3ceffff pref] [ 0.515491] pci 0000:02:00.0: PME# supported from D3hot [ 0.515508] pci 0000:02:00.1: [1b4b:91a4] type 0 class 0x000101 [ 0.515515] pci 0000:02:00.1: reg 10: [io 0xba00-0xba07] [ 0.515521] pci 0000:02:00.1: reg 14: [io 0xb900-0xb903] [ 0.515526] pci 0000:02:00.1: reg 18: [io 0xb800-0xb807] [ 0.515531] pci 0000:02:00.1: reg 1c: [io 0xb700-0xb703] [ 0.515537] pci 0000:02:00.1: reg 20: [io 0xb600-0xb60f] [ 0.515542] pci 0000:02:00.1: reg 24: [mem 0xf3cfe000-0xf3cfe00f] [ 0.515548] pci 0000:02:00.1: reg 30: [mem 0xf3ce0000-0xf3ceffff pref] [ 0.515573] pci 0000:02:00.1: PME# supported from D3hot [ 0.522029] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.522031] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] [ 0.522033] pci 0000:00:02.0: bridge window [mem 0xf3c00000-0xf3cfffff] [ 0.522066] pci 0000:03:00.0: [10de:1080] type 0 class 0x000300 [ 0.522073] pci 0000:03:00.0: reg 10: [mem 0xf1000000-0xf1ffffff] [ 0.522081] pci 0000:03:00.0: reg 14: [mem 0xc8000000-0xcfffffff 64bit pref] [ 0.522089] pci 0000:03:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref] [ 0.522094] pci 0000:03:00.0: reg 24: [io 0xcf00-0xcf7f] [ 0.522099] pci 0000:03:00.0: reg 30: [mem 0xf2f00000-0xf2f7ffff pref] [ 0.522142] pci 0000:03:00.1: [10de:0e09] type 0 class 0x000403 [ 0.522149] pci 0000:03:00.1: reg 10: [mem 0xf2ffc000-0xf2ffffff] [ 0.528673] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.528675] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.528677] pci 0000:00:03.0: bridge window [mem 0xf1000000-0xf2ffffff] [ 0.528680] pci 0000:00:03.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref] [ 0.528703] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 0.528730] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 0.528772] pci 0000:06:00.0: [1102:000b] type 0 class 0x000403 [ 0.528788] pci 0000:06:00.0: reg 10: [mem 0xdfff0000-0xdfffffff 64bit] [ 0.528802] pci 0000:06:00.0: reg 18: [mem 0xdfc00000-0xdfdfffff 64bit] [ 0.528815] pci 0000:06:00.0: reg 20: [mem 0xde000000-0xdeffffff 64bit] [ 0.535314] pci 0000:00:09.0: PCI bridge to [bus 06-06] [ 0.535317] pci 0000:00:09.0: bridge window [mem 0xde000000-0xdfffffff] [ 0.535353] pci 0000:00:1c.0: PCI bridge to [bus 07-07] [ 0.535407] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200 [ 0.535424] pci 0000:08:00.0: reg 10: [io 0xae00-0xaeff] [ 0.535451] pci 0000:08:00.0: reg 18: [mem 0xf38ff000-0xf38fffff 64bit pref] [ 0.535469] pci 0000:08:00.0: reg 20: [mem 0xf38f8000-0xf38fbfff 64bit pref] [ 0.535482] pci 0000:08:00.0: reg 30: [mem 0xf39e0000-0xf39fffff pref] [ 0.535541] pci 0000:08:00.0: supports D1 D2 [ 0.535542] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.541963] pci 0000:00:1c.2: PCI bridge to [bus 08-08] [ 0.541969] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff] [ 0.541976] pci 0000:00:1c.2: bridge window [mem 0xf3900000-0xf39fffff] [ 0.541984] pci 0000:00:1c.2: bridge window [mem 0xf3800000-0xf38fffff 64bit pref] [ 0.542033] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200 [ 0.542046] pci 0000:09:00.0: reg 10: [io 0xde00-0xdeff] [ 0.542073] pci 0000:09:00.0: reg 18: [mem 0xf3dff000-0xf3dfffff 64bit pref] [ 0.542091] pci 0000:09:00.0: reg 20: [mem 0xf3df8000-0xf3dfbfff 64bit pref] [ 0.542105] pci 0000:09:00.0: reg 30: [mem 0xf3ee0000-0xf3efffff pref] [ 0.542163] pci 0000:09:00.0: supports D1 D2 [ 0.542164] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.548601] pci 0000:00:1c.4: PCI bridge to [bus 09-09] [ 0.548607] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.548613] pci 0000:00:1c.4: bridge window [mem 0xf3e00000-0xf3efffff] [ 0.548621] pci 0000:00:1c.4: bridge window [mem 0xf3d00000-0xf3dfffff 64bit pref] [ 0.548652] pci 0000:0a:03.0: [104c:8023] type 0 class 0x000c00 [ 0.548669] pci 0000:0a:03.0: reg 10: [mem 0xf3bff000-0xf3bff7ff] [ 0.548677] pci 0000:0a:03.0: reg 14: [mem 0xf3bf8000-0xf3bfbfff] [ 0.548738] pci 0000:0a:03.0: supports D1 D2 [ 0.548739] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot [ 0.548777] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) [ 0.548781] pci 0000:00:1e.0: bridge window [mem 0xf3b00000-0xf3bfffff] [ 0.548789] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.548790] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.548791] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.548793] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.548794] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.548828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.548924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP1._PRT] [ 0.548940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP2._PRT] [ 0.548955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP3._PRT] [ 0.548971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP5._PRT] [ 0.548987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP7._PRT] [ 0.549003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP9._PRT] [ 0.549020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.549034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.549048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.549062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.549105] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.549106] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.549107] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.557003] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11 12 14 15) [ 0.557038] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11 12 14 15) [ 0.557070] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11 12 14 15) [ 0.557100] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11 12 14 15) [ 0.557130] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 10 11 12 14 15) *0, disabled. [ 0.557160] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 9 10 11 12 14 15) [ 0.557191] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 9 10 *11 12 14 15) [ 0.557221] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 *10 11 12 14 15) [ 0.557281] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.557283] vgaarb: loaded [ 0.557284] vgaarb: bridge control possible 0000:03:00.0 [ 0.557306] PCI: Using ACPI for IRQ routing [ 0.562023] PCI: Discovered peer bus ff [ 0.562023] PCI: root bus ff: using default resources [ 0.562039] PCI host bridge to bus 0000:ff [ 0.562040] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.562041] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.562045] pci 0000:ff:00.0: [8086:2c41] type 0 class 0x000600 [ 0.562055] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600 [ 0.562067] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600 [ 0.562077] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600 [ 0.562088] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600 [ 0.562098] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600 [ 0.562109] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600 [ 0.562119] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600 [ 0.562129] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600 [ 0.562139] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600 [ 0.562148] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600 [ 0.562159] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600 [ 0.562170] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600 [ 0.562179] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600 [ 0.562189] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600 [ 0.562200] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600 [ 0.562210] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600 [ 0.562220] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600 [ 0.562230] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600 [ 0.562490] PCI: pci_cache_line_size set to 64 bytes [ 0.562588] reserve RAM buffer: 000000000009c000 - 000000000009ffff [ 0.562589] reserve RAM buffer: 000000007f790000 - 000000007fffffff [ 0.562645] NetLabel: Initializing [ 0.562646] NetLabel: domain hash size = 128 [ 0.562647] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.562654] NetLabel: unlabeled traffic allowed by default [ 0.562661] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.562669] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.562671] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.575180] Switching to clocksource hpet [ 0.578246] pnp: PnP ACPI init [ 0.578256] ACPI: bus type pnp registered [ 0.578295] pnp 00:00: [bus 00-ff] [ 0.578297] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.578298] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.578299] pnp 00:00: [io 0x0d00-0xffff window] [ 0.578300] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.578301] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.578302] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.578325] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.578376] pnp 00:01: [io 0x0010-0x001f] [ 0.578379] pnp 00:01: [io 0x0022-0x003f] [ 0.578380] pnp 00:01: [io 0x0044-0x005f] [ 0.578380] pnp 00:01: [io 0x0062-0x0063] [ 0.578381] pnp 00:01: [io 0x0065-0x006f] [ 0.578382] pnp 00:01: [io 0x0074-0x007f] [ 0.578383] pnp 00:01: [io 0x0091-0x0093] [ 0.578384] pnp 00:01: [io 0x00a2-0x00bf] [ 0.578384] pnp 00:01: [io 0x00e0-0x00ef] [ 0.578385] pnp 00:01: [io 0x04d0-0x04d1] [ 0.578386] pnp 00:01: [io 0x0800-0x0805] [ 0.578387] pnp 00:01: [io 0x0880-0x088f] [ 0.578422] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.578424] system 00:01: [io 0x0800-0x0805] has been reserved [ 0.578425] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.578427] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.578433] pnp 00:02: [dma 4] [ 0.578433] pnp 00:02: [io 0x0000-0x000f] [ 0.578434] pnp 00:02: [io 0x0080-0x0090] [ 0.578435] pnp 00:02: [io 0x0094-0x009f] [ 0.578436] pnp 00:02: [io 0x00c0-0x00df] [ 0.578452] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.578483] pnp 00:03: [irq 0 disabled] [ 0.578489] pnp 00:03: [irq 8] [ 0.578489] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.578505] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.578522] pnp 00:04: [io 0x0070-0x0073] [ 0.578552] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.578556] pnp 00:05: [io 0x0061] [ 0.578571] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.578576] pnp 00:06: [io 0x00f0-0x00ff] [ 0.578580] pnp 00:06: [irq 13] [ 0.578595] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.578819] pnp 00:07: [io 0x0400-0x04bf] [ 0.578850] system 00:07: [io 0x0400-0x04bf] has been reserved [ 0.578852] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.578862] pnp 00:08: [mem 0xffb80000-0xffbfffff] [ 0.578878] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) [ 0.578993] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 0.579028] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.579030] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.579067] pnp 00:0a: [mem 0x000f0000-0x000fffff] [ 0.579068] pnp 00:0a: [mem 0x7f800000-0x7fffffff] [ 0.579069] pnp 00:0a: [mem 0xfed00000-0xfed000ff] [ 0.579070] pnp 00:0a: [mem 0x7f790000-0x7f7fffff] [ 0.579071] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.579072] pnp 00:0a: [mem 0x00100000-0x7f78ffff] [ 0.579073] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.579074] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.579075] pnp 00:0a: [mem 0xfed13000-0xfed1ffff] [ 0.579076] pnp 00:0a: [mem 0xfed20000-0xfed9ffff] [ 0.579077] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.579078] pnp 00:0a: [mem 0xffb00000-0xffb7ffff] [ 0.579078] pnp 00:0a: [mem 0xfff00000-0xffffffff] [ 0.579079] pnp 00:0a: [mem 0x000e0000-0x000effff] [ 0.579123] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.579125] system 00:0a: [mem 0x7f800000-0x7fffffff] has been reserved [ 0.579126] system 00:0a: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.579127] system 00:0a: [mem 0x7f790000-0x7f7fffff] could not be reserved [ 0.579129] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.579130] system 00:0a: [mem 0x00100000-0x7f78ffff] could not be reserved [ 0.579131] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.579132] system 00:0a: [mem 0xfed13000-0xfed1ffff] has been reserved [ 0.579134] system 00:0a: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.579135] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.579136] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.579137] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved [ 0.579139] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved [ 0.579140] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.579145] pnp: PnP ACPI: found 11 devices [ 0.579146] ACPI: ACPI bus type pnp unregistered [ 0.585420] pci 0000:02:00.1: address space collision: [mem 0xf3ce0000-0xf3ceffff pref] conflicts with 0000:02:00.0 [mem 0xf3ce0000-0xf3ceffff pref] [ 0.585427] PCI: max bus depth: 1 pci_try_num: 2 [ 0.585475] pci 0000:00:02.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref] [ 0.585477] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff] [ 0.585479] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref] [ 0.585480] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.585481] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.585484] pci 0000:00:01.0: bridge window [mem 0xf3a00000-0xf3afffff] [ 0.585489] pci 0000:02:00.1: BAR 6: assigned [mem 0x80000000-0x8000ffff pref] [ 0.585490] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.585491] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] [ 0.585494] pci 0000:00:02.0: bridge window [mem 0xf3c00000-0xf3cfffff] [ 0.585496] pci 0000:00:02.0: bridge window [mem 0x80000000-0x800fffff pref] [ 0.585499] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.585500] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.585503] pci 0000:00:03.0: bridge window [mem 0xf1000000-0xf2ffffff] [ 0.585505] pci 0000:00:03.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref] [ 0.585508] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 0.585513] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 0.585519] pci 0000:00:09.0: PCI bridge to [bus 06-06] [ 0.585521] pci 0000:00:09.0: bridge window [mem 0xde000000-0xdfffffff] [ 0.585525] pci 0000:00:1c.0: PCI bridge to [bus 07-07] [ 0.585531] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.585538] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff] [ 0.585545] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x804fffff 64bit pref] [ 0.585553] pci 0000:00:1c.2: PCI bridge to [bus 08-08] [ 0.585558] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff] [ 0.585566] pci 0000:00:1c.2: bridge window [mem 0xf3900000-0xf39fffff] [ 0.585572] pci 0000:00:1c.2: bridge window [mem 0xf3800000-0xf38fffff 64bit pref] [ 0.585580] pci 0000:00:1c.4: PCI bridge to [bus 09-09] [ 0.585586] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.585593] pci 0000:00:1c.4: bridge window [mem 0xf3e00000-0xf3efffff] [ 0.585599] pci 0000:00:1c.4: bridge window [mem 0xf3d00000-0xf3dfffff 64bit pref] [ 0.585607] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] [ 0.585614] pci 0000:00:1e.0: bridge window [mem 0xf3b00000-0xf3bfffff] [ 0.585648] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.585669] pci 0000:00:1e.0: setting latency timer to 64 [ 0.585676] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.585677] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.585678] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.585679] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.585680] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff] [ 0.585681] pci_bus 0000:01: resource 1 [mem 0xf3a00000-0xf3afffff] [ 0.585682] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.585683] pci_bus 0000:02: resource 1 [mem 0xf3c00000-0xf3cfffff] [ 0.585684] pci_bus 0000:02: resource 2 [mem 0x80000000-0x800fffff pref] [ 0.585686] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.585687] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf2ffffff] [ 0.585688] pci_bus 0000:03: resource 2 [mem 0xc8000000-0xd7ffffff 64bit pref] [ 0.585689] pci_bus 0000:06: resource 1 [mem 0xde000000-0xdfffffff] [ 0.585690] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.585691] pci_bus 0000:07: resource 1 [mem 0x80100000-0x802fffff] [ 0.585692] pci_bus 0000:07: resource 2 [mem 0x80300000-0x804fffff 64bit pref] [ 0.585693] pci_bus 0000:08: resource 0 [io 0xa000-0xafff] [ 0.585694] pci_bus 0000:08: resource 1 [mem 0xf3900000-0xf39fffff] [ 0.585696] pci_bus 0000:08: resource 2 [mem 0xf3800000-0xf38fffff 64bit pref] [ 0.585697] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.585698] pci_bus 0000:09: resource 1 [mem 0xf3e00000-0xf3efffff] [ 0.585699] pci_bus 0000:09: resource 2 [mem 0xf3d00000-0xf3dfffff 64bit pref] [ 0.585700] pci_bus 0000:0a: resource 1 [mem 0xf3b00000-0xf3bfffff] [ 0.585701] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] [ 0.585702] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] [ 0.585703] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] [ 0.585704] pci_bus 0000:0a: resource 7 [mem 0x000c0000-0x000dffff] [ 0.585705] pci_bus 0000:0a: resource 8 [mem 0x80000000-0xfebfffff] [ 0.585706] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.585707] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] [ 0.585727] NET: Registered protocol family 2 [ 0.585841] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.586372] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.587241] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.587343] TCP: Hash tables configured (established 524288 bind 65536) [ 0.587344] TCP reno registered [ 0.587353] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.587372] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.587437] NET: Registered protocol family 1 [ 0.587724] pci 0000:03:00.0: Boot video device [ 0.587759] PCI: CLS 64 bytes, default 64 [ 0.587788] Unpacking initramfs... [ 0.620910] Freeing initrd memory: 2936k freed [ 0.621141] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.621143] Placing 64MB software IO TLB between ffff88007b787000 - ffff88007f787000 [ 0.621144] software IO TLB at phys 0x7b787000 - 0x7f787000 [ 0.621452] audit: initializing netlink socket (disabled) [ 0.621461] type=2000 audit(1337088706.319:1): initialized [ 0.621852] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.623263] VFS: Disk quotas dquot_6.5.2 [ 0.623293] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.623343] msgmni has been set to 11923 [ 0.623486] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.623520] io scheduler noop registered [ 0.623521] io scheduler deadline registered [ 0.623553] io scheduler cfq registered (default) [ 0.623789] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.623872] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X [ 0.623954] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.624046] intel_idle: MWAIT substates: 0x1120 [ 0.624056] intel_idle: v0.4 model 0x1A [ 0.624057] intel_idle: lapic_timer_reliable_states 0x2 [ 0.624088] GHES: HEST is not enabled! [ 0.624128] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.624439] Linux agpgart interface v0.103 [ 0.624481] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.626880] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.626897] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.626967] mousedev: PS/2 mouse device common for all mice [ 0.627005] rtc_cmos 00:04: RTC can wake from S4 [ 0.627091] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.627113] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.627151] cpuidle: using governor ladder [ 0.627198] cpuidle: using governor menu [ 0.627292] TCP cubic registered [ 0.627356] NET: Registered protocol family 10 [ 0.627600] NET: Registered protocol family 17 [ 0.627602] Registering the dns_resolver key type [ 0.627726] PM: Hibernation image not present or could not be loaded. [ 0.627729] registered taskstats version 1 [ 0.628430] rtc_cmos 00:04: setting system clock to 2012-05-15 13:31:46 UTC (1337088706) [ 0.628450] Initializing network drop monitor service [ 0.629434] Freeing unused kernel memory: 732k freed [ 0.629502] Write protecting the kernel read-only data: 8192k [ 0.632619] Freeing unused kernel memory: 1632k freed [ 0.634109] Freeing unused kernel memory: 656k freed [ 0.640380] udevd[47]: starting version 182 [ 0.658913] usbcore: registered new interface driver usbfs [ 0.658925] usbcore: registered new interface driver hub [ 0.658968] usbcore: registered new device driver usb [ 0.660043] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.660064] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.660183] xhci_hcd 0000:01:00.0: irq 16, io mem 0xf3afe000 [ 0.660231] xhci_hcd 0000:01:00.0: irq 43 for MSI/MSI-X [ 0.660236] xhci_hcd 0000:01:00.0: irq 44 for MSI/MSI-X [ 0.660242] xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X [ 0.660247] xhci_hcd 0000:01:00.0: irq 46 for MSI/MSI-X [ 0.660253] xhci_hcd 0000:01:00.0: irq 47 for MSI/MSI-X [ 0.660468] SCSI subsystem initialized [ 0.660695] xHCI xhci_add_endpoint called for root hub [ 0.660696] xHCI xhci_check_bandwidth called for root hub [ 0.660712] hub 1-0:1.0: USB hub found [ 0.660716] hub 1-0:1.0: 2 ports detected [ 0.660944] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.660947] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.661023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.661061] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.661067] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.661072] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 0.661096] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.661806] libata version 3.00 loaded. [ 0.663639] xHCI xhci_add_endpoint called for root hub [ 0.663640] xHCI xhci_check_bandwidth called for root hub [ 0.663656] hub 2-0:1.0: USB hub found [ 0.663663] hub 2-0:1.0: 2 ports detected [ 0.664974] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.664983] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3ffe000 [ 0.666443] uhci_hcd: USB Universal Host Controller Interface driver [ 0.667594] scsi0 : pata_marvell [ 0.667833] scsi1 : pata_marvell [ 0.667861] ata1: PATA max UDMA/100 cmd 0xba00 ctl 0xb900 bmdma 0xb600 irq 17 [ 0.667863] ata2: PATA max UDMA/133 cmd 0xb800 ctl 0xb700 bmdma 0xb608 irq 17 [ 0.674873] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.675049] hub 3-0:1.0: USB hub found [ 0.675052] hub 3-0:1.0: 6 ports detected [ 0.675160] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.675166] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.675171] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 0.675191] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.679055] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.679073] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3ffd000 [ 0.688153] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.688386] hub 4-0:1.0: USB hub found [ 0.688390] hub 4-0:1.0: 6 ports detected [ 0.688525] ahci 0000:00:1f.2: version 3.0 [ 0.688575] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X [ 0.688623] ahci: SSS flag set, parallel bus scan disabled [ 0.688659] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.688661] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems [ 0.688666] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.722745] scsi2 : ahci [ 0.722945] scsi3 : ahci [ 0.723046] scsi4 : ahci [ 0.723479] scsi5 : ahci [ 0.723673] scsi6 : ahci [ 0.723810] scsi7 : ahci [ 0.724015] ata3: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc100 irq 48 [ 0.724021] ata4: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc180 irq 48 [ 0.724022] ata5: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc200 irq 48 [ 0.724028] ata6: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc280 irq 48 [ 0.724034] ata7: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc300 irq 48 [ 0.724036] ata8: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc380 irq 48 [ 0.724074] ahci 0000:02:00.0: irq 49 for MSI/MSI-X [ 0.724082] ahci 0000:02:00.0: controller can do FBS, turning on CAP_FBS [ 0.724115] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.724121] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.724126] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5 [ 0.724156] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.724262] hub 5-0:1.0: USB hub found [ 0.724264] hub 5-0:1.0: 2 ports detected [ 0.724319] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.724325] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.724329] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6 [ 0.724364] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.724437] hub 6-0:1.0: USB hub found [ 0.724439] hub 6-0:1.0: 2 ports detected [ 0.724496] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.724502] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.724505] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7 [ 0.724535] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00 [ 0.724622] hub 7-0:1.0: USB hub found [ 0.724624] hub 7-0:1.0: 2 ports detected [ 0.724688] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.724694] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.724698] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8 [ 0.724732] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.724927] hub 8-0:1.0: USB hub found [ 0.724930] hub 8-0:1.0: 2 ports detected [ 0.725012] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.725019] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.725025] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9 [ 0.725053] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.725149] hub 9-0:1.0: USB hub found [ 0.725151] hub 9-0:1.0: 2 ports detected [ 0.725201] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.725207] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.725211] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 [ 0.725236] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.725456] hub 10-0:1.0: USB hub found [ 0.725459] hub 10-0:1.0: 2 ports detected [ 0.734703] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 0.734706] ahci 0000:02:00.0: flags: 64bit ncq fbs pio [ 0.735387] scsi8 : ahci [ 0.735629] scsi9 : ahci [ 0.735870] scsi10 : ahci [ 0.736120] scsi11 : ahci [ 0.736346] scsi12 : ahci [ 0.736574] scsi13 : ahci [ 0.736807] scsi14 : ahci [ 0.737032] scsi15 : ahci [ 0.737090] ata9: SATA max UDMA/133 abar m2048@0xf3cff000 port 0xf3cff100 irq 49 [ 0.737093] ata10: SATA max UDMA/133 abar m2048@0xf3cff000 port 0xf3cff180 irq 49 [ 0.737096] ata11: SATA max UDMA/133 abar m2048@0xf3cff000 port 0xf3cff200 irq 49 [ 0.737098] ata12: SATA max UDMA/133 abar m2048@0xf3cff000 port 0xf3cff280 irq 49 [ 0.737101] ata13: SATA max UDMA/133 abar m2048@0xf3cff000 port 0xf3cff300 irq 49 [ 0.737103] ata14: SATA max UDMA/133 abar m2048@0xf3cff000 port 0xf3cff380 irq 49 [ 0.737106] ata15: SATA max UDMA/133 abar m2048@0xf3cff000 port 0xf3cff400 irq 49 [ 0.737108] ata16: SATA max UDMA/133 abar m2048@0xf3cff000 port 0xf3cff480 irq 49 [ 0.980498] usb 3-2: new high-speed USB device number 2 using ehci_hcd [ 1.040287] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.050952] ata3.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133 [ 1.050955] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.052029] ata3.00: configured for UDMA/133 [ 1.052270] scsi 2:0:0:0: Direct-Access ATA WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5 [ 1.053142] sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.053192] sd 2:0:0:0: [sda] Write Protect is off [ 1.053194] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.053211] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.053472] ata13: SATA link down (SStatus 0 SControl 300) [ 1.053503] ata11: SATA link down (SStatus 0 SControl 300) [ 1.053572] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.053637] ata12: SATA link down (SStatus 0 SControl 300) [ 1.053705] ata14: SATA link down (SStatus 0 SControl 300) [ 1.053776] ata10: SATA link down (SStatus 0 SControl 300) [ 1.056887] ata15: SATA link down (SStatus 0 SControl 300) [ 1.060243] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.060372] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 1.060605] ata16.00: configured for UDMA/66 [ 1.065411] ata9.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133 [ 1.065414] ata9.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.075362] ata9.00: configured for UDMA/133 [ 1.149489] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > [ 1.151673] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.369088] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.377047] ata4.00: ATA-8: WDC WD5001AALS-00F41A0, 01.03B01, max UDMA/133 [ 1.377050] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.378315] ata4.00: configured for UDMA/133 [ 1.378546] scsi 3:0:0:0: Direct-Access ATA WDC WD5001AALS-0 01.0 PQ: 0 ANSI: 5 [ 1.378710] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.378750] sd 3:0:0:0: [sdb] Write Protect is off [ 1.378753] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.378811] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.382879] sdb: sdb1 sdb2 [ 1.383334] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.618128] Refined TSC clocksource calibration: 4000.972 MHz. [ 1.618132] Switching to clocksource tsc [ 1.618222] usb 7-2: new low-speed USB device number 2 using uhci_hcd [ 1.694527] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.702581] ata5.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133 [ 1.706565] ata5.00: configured for UDMA/133 [ 1.715642] scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5 [ 2.019948] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 2.033240] ata6: SATA link down (SStatus 0 SControl 300) [ 2.208122] input: Logitech G500 as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/input/input0 [ 2.208412] generic-usb 0003:046D:C068.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1a.1-1/input0 [ 2.217074] input: Logitech G500 as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/input/input1 [ 2.217365] generic-usb 0003:046D:C068.0004: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1a.1-1/input1 [ 2.217379] usbcore: registered new interface driver usbhid [ 2.217380] usbhid: USB HID core driver [ 2.352104] ata7: SATA link down (SStatus 0 SControl 300) [ 2.670936] ata8: SATA link down (SStatus 0 SControl 300) [ 2.671082] scsi 8:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5 [ 2.671395] sd 8:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.671694] sd 8:0:0:0: [sdc] Write Protect is off [ 2.671697] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.671752] scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 2.671841] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.675443] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 > [ 2.677025] sd 8:0:0:0: [sdc] Attached SCSI disk [ 2.691674] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.691678] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.691795] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.698472] input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.0/input/input2 [ 2.698548] microsoft 0003:045E:0730.0001: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:1a.2-2/input0 [ 2.729352] input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.1/input/input3 [ 2.729378] microsoft 0003:045E:0730.0002: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:1a.2-2/input1 [ 4.724016] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 4.968952] udev[187]: starting version 164 [ 6.741369] EXT4-fs (sdc5): re-mounted. Opts: (null) [ 6.864942] EXT4-fs (sdc5): re-mounted. Opts: errors=remount-ro [ 7.140820] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)

Je ne sais pas trop ce que je dois regarder à vrais dire. En tout cas merci beaucoup pour ton aide.

Une mésaventure comparable m’était arrivé sous squeeze avec souris/clavier usb.

Je ne me souviens plus si c’était ehci, uhci ou un autre composant du noyau qui était en cause, ce dont je me souviens est qu’installer un noyau différent avait éliminé le problème.

Test : si le matériel le permet, rebrancher clavier/souris PS/2 pour voir si le phénomène se reproduit.

Je rencontrais un problème similaire et récurent, à chaque installation avec un cd Debian 6.0.1 amd64 de Squeeze. (il y a encore 2 jours sur un laptop) la différence est que j’ ai tout de même accès en mode console ctrl alt F1 mais la session graphique plante. J’ avais même gravé un second cd avec contrôle md5 de l’image iso et vitesse lente… idem.

ce problème survient lorsque je choisis à l’ installation l’option mode graphique, mais si j’installe en mode expert et non graphique, Debian démarre ensuite normalement avec le système de base par défaut Gnome, va comprendre !

Comment a tu fais ton installation ?

J’ai fais l’installation en mode expert justement, par contre j’ai essayé en branchent un clavier en PS/2 le problème persiste…

Jeter un oeil au log Xorg.0.log dans /var/log pour voir à quel moment ça coince

Voilà le contenu de Xorg.0.log:

(II) VESA(0): Total Memory: 224 64KB banks (14336kB)
(II) VESA(0): <default monitor>: Using hsync range of 30.00-140.00 kHz
(II) VESA(0): <default monitor>: Using vrefresh range of 56.00-120.00 Hz
(II) VESA(0): <default monitor>: Using maximum pixel clock of 295.00 MHz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
(--) VESA(0): Virtual size is 1280x1024 (pitch 1280)
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1280x800"
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): Display dimensions: (520, 290) mm
(**) VESA(0): DPI set to (62, 89)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "nv"
(II) Unloading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Bad V_BIOS checksum
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 14336 kB
(II) VESA(0): VESA VBE OEM: NVIDIA
(II) VESA(0): VESA VBE OEM Software Rev: 112.16
(II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation
(II) VESA(0): VESA VBE OEM Product: GF110 Board - 12610002
(II) VESA(0): VESA VBE OEM Product Rev: Chip Rev   
(II) VESA(0): virtual address = 0x7f7fd5982000,
	physical address = 0xd7000000, size = 14680064
(II) VESA(0): Setting up VESA Mode 0x11B (1280x1024)
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)

j’ai mis que la fin car je crois que c’est là que ça coince…

essaye avec une autre souris? (ou sans) :stuck_out_tongue:

Non toujours pas, j’ai débranché ma souris mais ça coince encore quand je tape startx ça m’affiche bien le bureau et là je ne peux plus rien faire.

Installe un noyau plus récent depuis les backports pour voir si ça résout le problème.
Sinon essaye une Debian Wheezy :wink:

Je vais essayer d’installer debian wheezy, je vous tiens au courant.

Bon alors j’ai installé debian wheezy et malheureusement le problème est le même…

Ça y est j’ai réussi à résoudre le problème! J’avais mal configuré GRUB en faite quand j’essayais de démarrer sur debian c’était le noyau de archlinux qui été chargé, c’est pourquoi ça ne fonctionnait pas.
Merci à vous tous de m’avoir apporté votre aide.

Salut,
Pas de [Résolu] stp; Ici nous préférons la coche verte =>

je me disais aussi que le -ARCH dans le nom du noyau au début du dmesg était bizarre :033

Ça aurait peut-être pu passer si tu avais copié /lib/modules/NOYAU-ARCH d’Arch vers debian. Je crois qu’il est de coutume sous Arch de ne pas utiliser initrd.

Avec initrd, il aurait fallu essayer

update-initramfs -c -k NOYAU-ARCH

rien que la version 3.3 pour une stable…
mais je n’ai rien vu moi non plus :blush: