Bluetooth avec une Ralink rt3290 sur Jessie

Support Debian
#1

Bonjour,
Que ce soit sur Ubuntu ou sur Squeeze, ma carte wifi / bluetooth pose problème (une ralink rt3290, et je ne suis pas le seul) .
Sur Jessie, cela semble mieux. Une petite recherche j’ ai pu activer le wifi :

git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git cp linux-firmware/rt3290.bin /lib/firmware

Seulement le bluetooth n’ est pas opérationnel. Un message d’ erreur, m’ indiquant un firmware manquant (surement le bluetooth, ma carte fait wifi et bluetooth, faut il 2 firmwares pour la faire fonctionner, une pour le wifi, et une pour le bluetooth ?)
Une recherche je suis dirigé sur cette page
Je télécharge donc et install firmware realteck , je n’ ai plus le message d’ erreur m’ indiquant un missing firmware, mais toujours pas de bluetooth, du moins je ne le trouve pas, que ce soit sur lxde ou gnome classique. Mais je me demande s’ il ne fonctionne pas quand même :

/etc/init.d/bluetooth restart [ ok ] Stopping bluetooth: rfcomm /usr/sbin/bluetoothd. [ ok ] Starting bluetooth: bluetoothd rfcomm.

Quelques retours de commande :

[code]root@jessie:/home/casper# ifconfig -a
eth0 Link encap:Ethernet HWaddr 6c:3b:e5:f6:af:8c
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:1680 (1.6 KiB) TX bytes:1680 (1.6 KiB)

wlan0 Link encap:Ethernet HWaddr a4:17:31:93:23:89
inet adr:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
adr inet6: fe80::a617:31ff:fe93:2389/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25019 errors:0 dropped:0 overruns:0 frame:0
TX packets:16369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:34794585 (33.1 MiB) TX bytes:1778689 (1.6 MiB)
[/code]

root@jessie:/home/casper# lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 7310] 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [Radeon HD 6250/6310] 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) 00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 3) 00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) 00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 04:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe 04:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth root@jessie:/home/casper# lspci -k 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 7310] Subsystem: Hewlett-Packard Company Device 1885 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: snd_hda_intel 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: ohci_hcd 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Hewlett-Packard Company Device 1885 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Hewlett-Packard Company Device 1885 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) Kernel driver in use: pcieport 00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 3) Kernel driver in use: pcieport 00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: ohci_hcd 00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: ehci-pci 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: rtsx_pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) Subsystem: Hewlett-Packard Company Device 1885 Kernel driver in use: r8169 04:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 18ec Kernel driver in use: rt2800pci 04:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: Hewlett-Packard Company Device 18ec

/lib/firmware# ls rt3290.bin RTL8192E RTL8192SU rtl_nic rtlwifi

Mon système est à jour.

Merci d’ avance pour votre aide, bon week end.

#2

Pour tester le BT, installe le paquet bluez-tools, et utilise les commandes qu’il fourni pour un diagnoqtique plus précis.

code.google.com/p/bluez-tools/

#3

Bonsoir, merci pour ta réponse.
J’ ai essayé l’ outil bt-adapter, ça s’ annonce mal :

bt-monitor No adapters found

Que puis je essayer d’ autre ?

Bonne soirée.

#4

tu peux essayer hcitool, avec le paramètre dev
linux.die.net/man/1/hcitool

#5

Alors j’ ai essayé quelques commandes, cela ne semble pas concluant :

Devices: root@jessie:/home/casper# hcitool inq Inquiring ... Inquiry failed.: No such device root@jessie:/home/casper# hcitool scan Device is not available: No such device root@jessie:/home/casper# hcitool name name: too few arguments (minimal: 1) Usage: name <bdaddr> root@jessie:/home/casper# hcitool info info: too few arguments (minimal: 1) Usage: info <bdaddr> root@jessie:/home/casper# hcitool spinq Periodic inquiry failed: File descriptor in bad state root@jessie:/home/casper# hcitool clock Not connected.

Mais pourquoi quand je lance un bluetooth restart je n’ ai pas d’ erreur :

/etc/init.d/bluetooth restart [ ok ] Stopping bluetooth: rfcomm /usr/sbin/bluetoothd. [ ok ] Starting bluetooth: bluetoothd rfcomm.

Et mon device semble etre reconnu :

04:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: Hewlett-Packard Company Device 18ec

Par contre, concernant ce retour de commande, je n’ ai pas cette ligne qui apparait souvent, comme par exemple pour la partie wifi de ma ralink :

Peut etre est ce là qu’ il faut creuser ? Je ne sais pas…

Bon après midi.

#6

ce n’est pas parceque un device est reconnu par lsusb qu’il va fonctionner. Il lui faut le driver et le firmware qui vont bien.
Et ce n’est pas parceque bluetoohd ne sort pas d’erreur que tout va bien. Si le device BT n’est pas crée dans /dev, bluetoohd te dira que tout va bien.
Analyse la sortie de dmesg pour voir si tu as des choses relative au BT.

#7

Oui, il manque cette ligne dans mon lspci -k pour ce device :

Je ne l’ ai pas pour mon bluetooth.
Pour mon bluethoot, le dmesg donne :

dmesg | grep Bluetooth [ 19.040787] Bluetooth: Core ver 2.16 [ 19.040870] Bluetooth: HCI device and connection manager initialized [ 19.040899] Bluetooth: HCI socket layer initialized [ 19.040911] Bluetooth: L2CAP socket layer initialized [ 19.040936] Bluetooth: SCO socket layer initialized [ 19.267078] Bluetooth: RFCOMM TTY layer initialized [ 19.267122] Bluetooth: RFCOMM socket layer initialized [ 19.267131] Bluetooth: RFCOMM ver 1.11 [ 19.678927] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.678942] Bluetooth: BNEP filters: protocol multicast [ 19.678974] Bluetooth: BNEP socket layer initialized

Quand je restart mon bluetooth, j’ obtiens cette erreur dans mon syslog :

Jul 10 09:31:38 jessie bluetoothd[2667]: Terminating Jul 10 09:31:38 jessie bluetoothd[2667]: Stopping SDP server Jul 10 09:31:38 jessie bluetoothd[2667]: Exit Jul 10 09:31:39 jessie bluetoothd[3571]: Bluetooth daemon 4.99 Jul 10 09:31:39 jessie bluetoothd[3571]: Starting SDP server Jul 10 09:31:39 jessie bluetoothd[3571]: Failed to init alert plugin Jul 10 09:31:39 jessie bluetoothd[3571]: Failed to init time plugin Jul 10 09:31:39 jessie bluetoothd[3571]: Failed to init gatt_example plugin

J’ ai fait une recherche, on demande souvent ces retours de commande :

[quote]lsmod | grep bluetooth
bluetooth 164803 10 bnep,rfcomm
rfkill 19159 5 cfg80211,hp_wmi,bluetooth
crc16 12343 2 ext4,bluetooth
[/quote]

dpkg -l | grep blue ii bluez 4.99-3 amd64 Bluetooth tools and daemons ii bluez-tools 0.1.38+git662e-3 amd64 Set of tools to manage Bluetooth devices for linux ii gir1.2-gnomebluetooth-1.0 3.8.1-2 amd64 Introspection data for GnomeBluetooth ii gnome-bluetooth 3.8.1-2 amd64 GNOME Bluetooth tools ii libbluetooth3:amd64 4.99-3 amd64 Library to use the BlueZ Linux Bluetooth stack ii libgnome-bluetooth10 3.4.2-1 amd64 GNOME Bluetooth tools - support library ii libgnome-bluetooth11 3.8.1-2 amd64 GNOME Bluetooth tools - support library

Voila, en te souhaitant une bonne journée.

#8

Ton filtrage sur dmesg est trop limitant. Il faut regarder en détail la sortie de dmesg pour déceler une anomalie(chargemet de firmware par ex)

#9

Voici mon dmesg complet.

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=c55462f3-bf79-41ed-a6ae-9ca7144c8899 ro quiet splash acpi_osi=Linux acpi_backlight=vendor [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df2befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df2bf000-0x00000000dfabefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfbbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000106ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000107000000-0x000000011effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0xdfbfe000 ACPI 2.0=0xdfbfe014 SMBIOS=0xdfabef98 [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB) [ 0.000000] efi: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB) [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB) [ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB) [ 0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB) [ 0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006e000) (0MB) [ 0.000000] efi: mem07: type=10, attr=0xf, range=[0x000000000006e000-0x0000000000070000) (0MB) [ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB) [ 0.000000] efi: mem09: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB) [ 0.000000] efi: mem11: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB) [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001c7a000) (12MB) [ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000001c7a000-0x00000000369b8000) (845MB) [ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x00000000369b8000-0x00000000374d4000) (11MB) [ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x00000000374d4000-0x000000009cb2a000) (1622MB) [ 0.000000] efi: mem16: type=2, attr=0xf, range=[0x000000009cb2a000-0x00000000d38c0000) (877MB) [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000d38c0000-0x00000000d38e0000) (0MB) [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000d38e0000-0x00000000d5e32000) (37MB) [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000d5e32000-0x00000000d68bc000) (10MB) [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000d68bc000-0x00000000d6aa1000) (1MB) [ 0.000000] efi: mem21: type=1, attr=0xf, range=[0x00000000d6aa1000-0x00000000d6abf000) (0MB) [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000d6abf000-0x00000000dbe4a000) (83MB) [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000dbe4a000-0x00000000dc6cc000) (8MB) [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000dc6cc000-0x00000000dc9cd000) (3MB) [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000dc9cd000-0x00000000dce41000) (4MB) [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000dce41000-0x00000000dce43000) (0MB) [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000dce43000-0x00000000dce69000) (0MB) [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000dce69000-0x00000000dce6b000) (0MB) [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000dce6b000-0x00000000dce8a000) (0MB) [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000dce8a000-0x00000000dce8e000) (0MB) [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000dce8e000-0x00000000dce99000) (0MB) [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000dce99000-0x00000000dce9b000) (0MB) [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000dce9b000-0x00000000dcec5000) (0MB) [ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000dcec5000-0x00000000dcec7000) (0MB) [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000dcec7000-0x00000000dd051000) (1MB) [ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x00000000dd051000-0x00000000dd067000) (0MB) [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x00000000dd067000-0x00000000dd098000) (0MB) [ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x00000000dd098000-0x00000000dd09e000) (0MB) [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000dd09e000-0x00000000dd0bc000) (0MB) [ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x00000000dd0bc000-0x00000000dd0bd000) (0MB) [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000dd0bd000-0x00000000dd0e4000) (0MB) [ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x00000000dd0e4000-0x00000000dd0e5000) (0MB) [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000dd0e5000-0x00000000dd0e8000) (0MB) [ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x00000000dd0e8000-0x00000000dd0e9000) (0MB) [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000dd0e9000-0x00000000dd0fd000) (0MB) [ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x00000000dd0fd000-0x00000000dd0fe000) (0MB) [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000dd0fe000-0x00000000deabf000) (25MB) [ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x00000000deabf000-0x00000000def67000) (4MB) [ 0.000000] efi: mem49: type=2, attr=0xf, range=[0x00000000def67000-0x00000000def71000) (0MB) [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000def71000-0x00000000df2bf000) (3MB) [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000df2bf000-0x00000000df6bf000) (4MB) [ 0.000000] efi: mem52: type=6, attr=0x800000000000000f, range=[0x00000000df6bf000-0x00000000df8bf000) (2MB) [ 0.000000] efi: mem53: type=0, attr=0xf, range=[0x00000000df8bf000-0x00000000dfabf000) (2MB) [ 0.000000] efi: mem54: type=10, attr=0xf, range=[0x00000000dfabf000-0x00000000dfbbf000) (1MB) [ 0.000000] efi: mem55: type=9, attr=0xf, range=[0x00000000dfbbf000-0x00000000dfbff000) (0MB) [ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x00000000dfbff000-0x00000000dfc00000) (0MB) [ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x0000000100000000-0x0000000107000000) (112MB) [ 0.000000] efi: mem58: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB) [ 0.000000] efi: mem59: type=0, attr=0x0, range=[0x00000000dfc00000-0x00000000e0000000) (4MB) [ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB) [ 0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB) [ 0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB) [ 0.000000] efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB) [ 0.000000] efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB) [ 0.000000] efi: mem65: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB) [ 0.000000] efi: mem66: type=0, attr=0x0, range=[0x0000000107000000-0x000000011f000000) (384MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard Compaq CQ58 Notebook PC/1885, BIOS F.26 05/21/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x107000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DFBBC000 mask FFFFFF000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000011f000000 aka 4592M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000024000] 24000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01859000, 0x01859fff] PGTABLE [ 0.000000] BRK [0x0185a000, 0x0185afff] PGTABLE [ 0.000000] BRK [0x0185b000, 0x0185bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x106e00000-0x106ffffff] [ 0.000000] [mem 0x106e00000-0x106ffffff] page 2M [ 0.000000] BRK [0x0185c000, 0x0185cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x104000000-0x106dfffff] [ 0.000000] [mem 0x104000000-0x106dfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x103ffffff] [ 0.000000] [mem 0x100000000-0x103ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf2befff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xdf1fffff] page 2M [ 0.000000] [mem 0xdf200000-0xdf2befff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdfbff000-0xdfbfffff] [ 0.000000] [mem 0xdfbff000-0xdfbfffff] page 4k [ 0.000000] BRK [0x0185d000, 0x0185dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x369b8000-0x374d3fff] [ 0.000000] ACPI: RSDP 00000000dfbfe014 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000dfbfe120 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013) [ 0.000000] ACPI: FACP 00000000dfbfc000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 00000000dfbe7000 10291 (v01 HPQOEM 1885 F0000000 ACPI 00040000) [ 0.000000] ACPI: FACS 00000000dfb8a000 00040 [ 0.000000] ACPI: UEFI 00000000dfbfd000 00236 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: HPET 00000000dfbfb000 00038 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: APIC 00000000dfbfa000 00084 (v03 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 00000000dfbf9000 0003C (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 00000000dfbf8000 000A5 (v32 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: BOOT 00000000dfbe6000 00028 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: FPDT 00000000dfbe4000 00044 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: MSDM 00000000dfbe3000 00055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 00000000dfbe2000 003DE (v01 HPQOEM 1885 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000dfbe0000 016E4 (v02 HPQOEM 1885 00000001 ACPI 00040000) [ 0.000000] ACPI: BGRT 00000000dfbdf000 00038 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000106ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x106ffffff] [ 0.000000] NODE_DATA [mem 0x106ffa000-0x106ffdfff] [ 0.000000] [ffffea0000000000-ffffea00039fffff] PMD -> [ffff880102c00000-ffff880105ffffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x106ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0006dfff] [ 0.000000] node 0: [mem 0x00070000-0x00087fff] [ 0.000000] node 0: [mem 0x00100000-0xdf2befff] [ 0.000000] node 0: [mem 0xdfbff000-0xdfbfffff] [ 0.000000] node 0: [mem 0x100000000-0x106ffffff] [ 0.000000] On node 0 totalpages: 942661 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 110 pages reserved [ 0.000000] DMA zone: 3973 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12442 pages used for memmap [ 0.000000] DMA32 zone: 910016 pages, LIFO batch:31 [ 0.000000] Normal zone: 392 pages used for memmap [ 0.000000] Normal zone: 28672 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000006e000 - 0000000000070000 [ 0.000000] PM: Registered nosave memory: 0000000000088000 - 00000000000c0000 [ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000df2bf000 - 00000000dfabf000 [ 0.000000] PM: Registered nosave memory: 00000000dfabf000 - 00000000dfbbf000 [ 0.000000] PM: Registered nosave memory: 00000000dfbbf000 - 00000000dfbff000 [ 0.000000] PM: Registered nosave memory: 00000000dfc00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000 [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000 [ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880106c00000 s84800 r8192 d21696 u524288 [ 0.000000] pcpu-alloc: s84800 r8192 d21696 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 929661 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=c55462f3-bf79-41ed-a6ae-9ca7144c8899 ro quiet splash acpi_osi=Linux acpi_backlight=vendor [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3573656k/4308992k available (3646k kernel code, 538348k absent, 196988k reserved, 3108k data, 880k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1397.442 MHz processor [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.88 BogoMIPS (lpj=5589768) [ 0.000015] pid_max: default: 32768 minimum: 301 [ 0.000061] init_memory_mapping: [mem 0xdf2bf000-0xdf6befff] [ 0.000066] [mem 0xdf2bf000-0xdf3fffff] page 4k [ 0.000070] [mem 0xdf400000-0xdf5fffff] page 2M [ 0.000073] [mem 0xdf600000-0xdf6befff] page 4k [ 0.000139] init_memory_mapping: [mem 0xdf6bf000-0xdf8befff] [ 0.000143] [mem 0xdf6bf000-0xdf8befff] page 4k [ 0.011411] Security Framework initialized [ 0.011429] AppArmor: AppArmor disabled by boot time parameter [ 0.011433] Yama: becoming mindful. [ 0.012081] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015291] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.016806] Mount-cache hash table entries: 256 [ 0.017246] Initializing cgroup subsys cpuacct [ 0.017254] Initializing cgroup subsys memory [ 0.017287] Initializing cgroup subsys devices [ 0.017293] Initializing cgroup subsys freezer [ 0.017297] Initializing cgroup subsys net_cls [ 0.017302] Initializing cgroup subsys blkio [ 0.017306] Initializing cgroup subsys perf_event [ 0.017376] tseg: 00dfc00000 [ 0.017381] CPU: Physical Processor ID: 0 [ 0.017384] CPU: Processor Core ID: 0 [ 0.017388] mce: CPU supports 6 MCE banks [ 0.017411] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.017411] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.017411] tlb_flushall_shift: 5 [ 0.017632] Freeing SMP alternatives: 12k freed [ 0.018525] ACPI: Core revision 20130117 [ 0.033938] ACPI: All ACPI Tables successfully acquired [ 0.043987] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083699] smpboot: CPU0: AMD E1-1200 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00) [ 0.189648] Performance Events: AMD PMU driver. [ 0.189660] ... version: 0 [ 0.189664] ... bit width: 48 [ 0.189667] ... generic registers: 4 [ 0.189670] ... value mask: 0000ffffffffffff [ 0.189674] ... max period: 00007fffffffffff [ 0.189677] ... fixed-purpose events: 0 [ 0.189680] ... event mask: 000000000000000f [ 0.190326] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.190635] smpboot: Booting Node 0, Processors #1 [ 0.203748] Brought up 2 CPUs [ 0.203755] smpboot: Total of 2 processors activated (5589.76 BogoMIPS) [ 0.204857] devtmpfs: initialized [ 0.211176] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes) [ 0.211187] PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfbbefff] (1048576 bytes) [ 0.211656] regulator-dummy: no parameters [ 0.211877] NET: Registered protocol family 16 [ 0.212351] ACPI: bus type PCI registered [ 0.212579] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.212586] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.221150] PCI: Using configuration type 1 for base access [ 0.223498] bio: create slab <bio-0> at 0 [ 0.223969] ACPI: Added _OSI(Module Device) [ 0.223978] ACPI: Added _OSI(Processor Device) [ 0.223983] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.223988] ACPI: Added _OSI(Processor Aggregator Device) [ 0.223992] ACPI: Added _OSI(Linux) [ 0.227192] ACPI: EC: Look up EC in DSDT [ 0.230446] ACPI: Executed 1 blocks of module-level executable AML code [ 0.239667] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.262413] ACPI: Interpreter enabled [ 0.262447] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.262461] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.262501] ACPI: (supports S0 S3 S4 S5) [ 0.262506] ACPI: Using IOAPIC for interrupt routing [ 0.263077] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.274773] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.289732] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.290486] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff]) [ 0.290500] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.290579] PCI host bridge to bus 0000:00 [ 0.290588] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.290595] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.290601] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.290607] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.290613] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.290618] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.290624] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.290629] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.290635] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.290640] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.290646] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.290651] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.290657] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.290662] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.290667] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.290673] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff] [ 0.290678] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff] [ 0.290684] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] [ 0.290704] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 [ 0.290946] pci 0000:00:01.0: [1002:9809] type 00 class 0x030000 [ 0.290965] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref] [ 0.290978] pci 0000:00:01.0: reg 14: [io 0x3000-0x30ff] [ 0.290990] pci 0000:00:01.0: reg 18: [mem 0xf0300000-0xf033ffff] [ 0.291061] pci 0000:00:01.0: supports D1 D2 [ 0.291171] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 [ 0.291187] pci 0000:00:01.1: reg 10: [mem 0xf0344000-0xf0347fff] [ 0.291268] pci 0000:00:01.1: supports D1 D2 [ 0.291555] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601 [ 0.291583] pci 0000:00:11.0: reg 10: [io 0x3118-0x311f] [ 0.291598] pci 0000:00:11.0: reg 14: [io 0x3124-0x3127] [ 0.291613] pci 0000:00:11.0: reg 18: [io 0x3110-0x3117] [ 0.291628] pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123] [ 0.291643] pci 0000:00:11.0: reg 20: [io 0x3100-0x310f] [ 0.291658] pci 0000:00:11.0: reg 24: [mem 0xf034c000-0xf034c7ff] [ 0.291949] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.291971] pci 0000:00:12.0: reg 10: [mem 0xf034b000-0xf034bfff] [ 0.292118] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.292302] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.292725] pci 0000:00:12.2: reg 10: [mem 0xf034a000-0xf034a0ff] [ 0.294837] pci 0000:00:12.2: supports D1 D2 [ 0.294843] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.294944] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.295078] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.295398] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.295429] pci 0000:00:14.2: reg 10: [mem 0xf0340000-0xf0343fff 64bit] [ 0.295516] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.295678] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.296012] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 [ 0.296170] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.296338] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 [ 0.296444] pci 0000:00:15.0: supports D1 D2 [ 0.296510] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.296640] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400 [ 0.296744] pci 0000:00:15.1: supports D1 D2 [ 0.296814] pci 0000:00:15.1: System wakeup disabled by ACPI [ 0.296947] pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400 [ 0.297051] pci 0000:00:15.3: supports D1 D2 [ 0.297131] pci 0000:00:15.3: System wakeup disabled by ACPI [ 0.297294] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310 [ 0.297315] pci 0000:00:16.0: reg 10: [mem 0xf0349000-0xf0349fff] [ 0.297470] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.297636] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320 [ 0.298000] pci 0000:00:16.2: reg 10: [mem 0xf0348000-0xf03480ff] [ 0.300121] pci 0000:00:16.2: supports D1 D2 [ 0.300126] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.300234] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.300370] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 [ 0.300590] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 [ 0.300806] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 [ 0.301022] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 [ 0.301250] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 [ 0.301463] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 [ 0.301674] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 [ 0.301887] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 [ 0.302327] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 0.302344] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.302351] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.302360] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.302367] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.302373] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.302379] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.302385] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.302390] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.302396] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.302402] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.302408] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.302414] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.302419] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.302425] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.302431] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.302437] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode) [ 0.302443] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode) [ 0.302614] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000 [ 0.302642] pci 0000:02:00.0: reg 10: [mem 0xf0200000-0xf0200fff] [ 0.302803] pci 0000:02:00.0: supports D1 D2 [ 0.302809] pci 0000:02:00.0: PME# supported from D1 D2 D3hot [ 0.312087] pci 0000:00:15.0: PCI bridge to [bus 02] [ 0.312109] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.312332] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000 [ 0.312362] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff] [ 0.312403] pci 0000:03:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.312430] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.312538] pci 0000:03:00.0: supports D1 D2 [ 0.312544] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.313490] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.320089] pci 0000:00:15.1: PCI bridge to [bus 03] [ 0.320108] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] [ 0.320124] pci 0000:00:15.1: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.320350] pci 0000:04:00.0: [1814:3290] type 00 class 0x028000 [ 0.320392] pci 0000:04:00.0: reg 10: [mem 0xf0110000-0xf011ffff] [ 0.320581] pci 0000:04:00.0: PME# supported from D0 D3hot [ 0.320785] pci 0000:04:00.1: [1814:3298] type 00 class 0x0d1100 [ 0.320824] pci 0000:04:00.1: reg 10: [mem 0xf0100000-0xf010ffff] [ 0.320989] pci 0000:04:00.1: supports D1 [ 0.320994] pci 0000:04:00.1: PME# supported from D0 D1 D3hot [ 0.328115] pci 0000:00:15.3: PCI bridge to [bus 04] [ 0.328138] pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.328568] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.329102] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x09 [ 0.329106] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.332125] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.332377] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.332635] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.332887] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.333115] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.333342] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.333569] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.333761] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.334427] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.334444] acpi root: \_SB_.PCI0 notify handler is installed [ 0.334576] Found 1 acpi root devices [ 0.334739] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.335074] ACPI: No dock devices found. [ 0.335448] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.335470] vgaarb: loaded [ 0.335473] vgaarb: bridge control possible 0000:00:01.0 [ 0.335618] PCI: Using ACPI for IRQ routing [ 0.338087] PCI: pci_cache_line_size set to 64 bytes [ 0.338139] pci 0000:03:00.0: no compatible bridge window for [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.338148] pci 0000:03:00.0: no compatible bridge window for [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.338217] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff] [ 0.338223] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 0.338227] e820: reserve RAM buffer [mem 0xdf2bf000-0xdfffffff] [ 0.338232] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff] [ 0.338236] e820: reserve RAM buffer [mem 0x107000000-0x107ffffff] [ 0.338595] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.338605] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.340640] Switching to clocksource hpet [ 0.345357] pnp: PnP ACPI init [ 0.345403] ACPI: bus type PNP registered [ 0.345754] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.345762] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.345773] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.346285] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.346393] pnp 00:02: [dma 4] [ 0.346447] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.346598] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.346772] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.346846] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.346983] system 00:06: [io 0x0400-0x04cf] has been reserved [ 0.346990] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.346996] system 00:06: [io 0x04d6] has been reserved [ 0.347003] system 00:06: [io 0x0680-0x06ff] has been reserved [ 0.347009] system 00:06: [io 0x077a] has been reserved [ 0.347015] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 0.347022] system 00:06: [io 0x0c14] has been reserved [ 0.347028] system 00:06: [io 0x0c50-0x0c52] has been reserved [ 0.347034] system 00:06: [io 0x0c6c] has been reserved [ 0.347040] system 00:06: [io 0x0c6f] has been reserved [ 0.347046] system 00:06: [io 0x0cd0-0x0cdb] has been reserved [ 0.347052] system 00:06: [io 0x0840-0x0847] has been reserved [ 0.347060] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.347278] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.347285] system 00:07: [mem 0xffc00000-0xffffffff] has been reserved [ 0.347293] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.348388] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.348548] pnp 00:09: Plug and Play ACPI device, IDs SYN1e70 SYN1e00 SYN0002 PNP0f13 (active) [ 0.349683] pnp: PnP ACPI: found 10 devices [ 0.349688] ACPI: bus type PNP unregistered [ 0.363929] pci 0000:00:15.1: BAR 15: assigned [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.363942] pci 0000:00:14.4: PCI bridge to [bus 01] [ 0.363998] pci 0000:00:15.0: PCI bridge to [bus 02] [ 0.364009] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.364026] pci 0000:03:00.0: BAR 4: assigned [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.364048] pci 0000:03:00.0: BAR 2: assigned [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.364067] pci 0000:00:15.1: PCI bridge to [bus 03] [ 0.364074] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] [ 0.364087] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.364098] pci 0000:00:15.3: PCI bridge to [bus 04] [ 0.364107] pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.364670] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.364677] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.364682] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.364687] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.364693] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.364698] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.364703] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.364708] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.364713] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.364768] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.364774] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.364779] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.364784] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.364790] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.364795] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff] [ 0.364800] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.364805] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff] [ 0.364811] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.364816] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.364822] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.364827] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.364832] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.364837] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.364842] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.364847] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.364852] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.364858] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff] [ 0.364863] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.364868] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.364873] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.364878] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff] [ 0.364883] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff] [ 0.364888] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.364893] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff] [ 0.364898] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff] [ 0.364904] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.364909] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.364915] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff] [ 0.365151] NET: Registered protocol family 2 [ 0.365855] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.366263] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.366585] TCP: Hash tables configured (established 32768 bind 32768) [ 0.366706] TCP: reno registered [ 0.366744] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.366807] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.367160] NET: Registered protocol family 1 [ 0.367203] pci 0000:00:01.0: Boot video device [ 0.541363] PCI: CLS 64 bytes, default 64 [ 0.541498] Unpacking initramfs... [ 1.033283] Freeing initrd memory: 11376k freed [ 1.040887] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.040901] software IO TLB [mem 0xd7e4a000-0xdbe4a000] (64MB) mapped at [ffff8800d7e4a000-ffff8800dbe49fff] [ 1.041097] Simple Boot Flag at 0x44 set to 0x1 [ 1.041292] LVT offset 0 assigned for vector 0x400 [ 1.041445] perf: AMD IBS detected (0x000000ff) [ 1.042222] audit: initializing netlink socket (disabled) [ 1.042254] type=2000 audit(1373459431.936:1): initialized [ 1.073422] bounce pool size: 64 pages [ 1.073438] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.075141] VFS: Disk quotas dquot_6.5.2 [ 1.075270] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.075559] msgmni has been set to 7113 [ 1.076347] alg: No test for stdrng (krng) [ 1.076444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.076561] io scheduler noop registered [ 1.076567] io scheduler deadline registered [ 1.076599] io scheduler cfq registered (default) [ 1.077129] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.077171] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.077175] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.077781] efifb: probing for efifb [ 1.078444] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90008d00000, using 4224k, total 4224k [ 1.078449] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 1.078452] efifb: scrolling: redraw [ 1.078457] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.086572] Console: switching to colour frame buffer device 170x48 [ 1.094276] fb0: EFI VGA frame buffer device [ 1.094361] GHES: HEST is not enabled! [ 1.094765] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.097505] Linux agpgart interface v0.103 [ 1.097828] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.103249] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.103266] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.104054] mousedev: PS/2 mouse device common for all mice [ 1.104261] rtc_cmos 00:04: RTC can wake from S4 [ 1.104700] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.104788] rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.104820] cpuidle: using governor ladder [ 1.104824] cpuidle: using governor menu [ 1.105027] drop_monitor: Initializing network drop monitor service [ 1.105183] TCP: cubic registered [ 1.105326] NET: Registered protocol family 10 [ 1.105828] mip6: Mobile IPv6 [ 1.105835] NET: Registered protocol family 17 [ 1.106539] PM: Hibernation image not present or could not be loaded. [ 1.106567] registered taskstats version 1 [ 1.107987] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.109251] rtc_cmos 00:04: setting system clock to 2013-07-10 12:30:32 UTC (1373459432) [ 1.111803] Freeing unused kernel memory: 880k freed [ 1.112355] Write protecting the kernel read-only data: 6144k [ 1.115951] Freeing unused kernel memory: 440k freed [ 1.119897] Freeing unused kernel memory: 520k freed [ 1.158239] udevd[55]: starting version 175 [ 1.224661] ACPI: bus type USB registered [ 1.224734] usbcore: registered new interface driver usbfs [ 1.224763] usbcore: registered new interface driver hub [ 1.226922] SCSI subsystem initialized [ 1.231752] rtsx_pci 0000:02:00.0: irq 40 for MSI/MSI-X [ 1.231786] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 40 [ 1.236744] usbcore: registered new device driver usb [ 1.238883] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.239525] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.239929] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.239947] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.240015] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf034b000 [ 1.241704] ehci-pci: EHCI PCI platform driver [ 1.244009] ACPI: bus type ATA registered [ 1.263240] libata version 3.00 loaded. [ 1.297347] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.297359] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.297365] usb usb1: Product: OHCI Host Controller [ 1.297370] usb usb1: Manufacturer: Linux 3.9-1-amd64 ohci_hcd [ 1.297376] usb usb1: SerialNumber: 0000:00:12.0 [ 1.299258] hub 1-0:1.0: USB hub found [ 1.299315] hub 1-0:1.0: 5 ports detected [ 1.300032] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.300049] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 2 [ 1.300088] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0349000 [ 1.308417] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.308930] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 1.310013] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000004c000, 6c:3b:e5:f6:af:8c, XID 00c00000 IRQ 41 [ 1.317496] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.317506] ACPI: Thermal Zone [TSZ0] (57 C) [ 1.357936] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.357947] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.357953] usb usb2: Product: OHCI Host Controller [ 1.357958] usb usb2: Manufacturer: Linux 3.9-1-amd64 ohci_hcd [ 1.357964] usb usb2: SerialNumber: 0000:00:16.0 [ 1.358909] hub 2-0:1.0: USB hub found [ 1.358996] hub 2-0:1.0: 4 ports detected [ 1.359784] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.359809] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.359842] QUIRK: Enable AMD PLL fix [ 1.359848] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.359900] ehci-pci 0000:00:12.2: debug port 1 [ 1.359990] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034a000 [ 1.369202] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.369273] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.369279] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.369285] usb usb3: Product: EHCI Host Controller [ 1.369291] usb usb3: Manufacturer: Linux 3.9-1-amd64 ehci_hcd [ 1.369296] usb usb3: SerialNumber: 0000:00:12.2 [ 1.369673] hub 3-0:1.0: USB hub found [ 1.369688] hub 3-0:1.0: 5 ports detected [ 1.370383] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.370400] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 4 [ 1.370412] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.370430] ehci-pci 0000:00:16.2: debug port 1 [ 1.370488] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0348000 [ 1.381200] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.381277] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.381284] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.381290] usb usb4: Product: EHCI Host Controller [ 1.381295] usb usb4: Manufacturer: Linux 3.9-1-amd64 ehci_hcd [ 1.381300] usb usb4: SerialNumber: 0000:00:16.2 [ 1.381641] hub 4-0:1.0: USB hub found [ 1.381656] hub 4-0:1.0: 4 ports detected [ 1.382111] ahci 0000:00:11.0: version 3.0 [ 1.382523] ahci 0000:00:11.0: irq 42 for MSI/MSI-X [ 1.382676] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.382685] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.384928] scsi0 : ahci [ 1.385527] scsi1 : ahci [ 1.385706] ata1: SATA max UDMA/133 abar m2048@0xf034c000 port 0xf034c100 irq 42 [ 1.385714] ata2: SATA max UDMA/133 abar m2048@0xf034c000 port 0xf034c180 irq 42 [ 1.681485] usb 3-3: new high-speed USB device number 2 using ehci-pci [ 1.877502] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.877549] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.879399] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA7A0, max UDMA/100 [ 1.879415] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.881378] ata2.00: ATAPI: hp DVD A DS8A8SH, KH63, max UDMA/100 [ 1.881418] ata1.00: configured for UDMA/100 [ 1.881988] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 1.891400] usb 3-3: New USB device found, idVendor=0bda, idProduct=58de [ 1.891417] usb 3-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.891427] usb 3-3: Product: HP Truevision HD [ 1.891436] usb 3-3: Manufacturer: DCUSA01WS3KD7G [ 1.891444] usb 3-3: SerialNumber: 200901010001 [ 1.892924] ata2.00: configured for UDMA/100 [ 1.910708] scsi 1:0:0:0: CD-ROM hp DVD A DS8A8SH KH63 PQ: 0 ANSI: 5 [ 1.920885] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.920896] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.921084] sd 0:0:0:0: [sda] Write Protect is off [ 1.921093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.921159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.939307] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.939318] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.939660] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.945611] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.945817] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.971653] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 [ 1.974159] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.041518] tsc: Refined TSC clocksource calibration: 1397.458 MHz [ 2.041532] Switching to clocksource tsc [ 3.382293] PM: Starting manual resume from disk [ 3.382305] PM: Hibernation image partition 8:6 present [ 3.382308] PM: Looking for hibernation image. [ 3.405044] PM: Image not found (code -22) [ 3.405053] PM: Hibernation image not present or could not be loaded. [ 3.470942] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null) [ 5.226433] udevd[360]: starting version 175 [ 6.736161] EFI Variables Facility v0.08 2004-May-17 [ 6.742700] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 6.744984] ACPI: Lid Switch [LID] [ 6.745221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 6.745352] ACPI: Power Button [PWRB] [ 6.745490] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.745570] ACPI: Power Button [PWRF] [ 6.755651] microcode: CPU0: patch_level=0x0500010d [ 6.759765] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 7.024683] platform microcode: firmware: agent aborted loading amd-ucode/microcode_amd.bin (not found?) [ 7.025204] microcode: CPU1: patch_level=0x0500010d [ 7.025308] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 7.092718] kvm: Nested Virtualization enabled [ 7.092731] kvm: Nested Paging enabled [ 7.121224] _handle_hotplug_event_root: Bus check notify on \_SB_.PCI0 [ 7.159872] Error: Driver 'pcspkr' is already registered, aborting... [ 7.343565] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X [ 7.403720] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 [ 7.448177] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 7.448359] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 7.463772] ACPI: AC Adapter [AC] (on-line) [ 7.567695] [Firmware Bug]: efi: Inconsistent initial sizes [ 7.571742] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211) [ 7.571764] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff8801026c6fd8), AE_ALREADY_EXISTS (20130117/psparse-537) [ 7.571795] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20130117/ac-122) [ 7.591387] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211) [ 7.591409] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff8801026c6fd8), AE_ALREADY_EXISTS (20130117/psparse-537) [ 7.591439] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20130117/ac-122) [ 7.591811] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211) [ 7.591832] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff8801026c6fd8), AE_ALREADY_EXISTS (20130117/psparse-537) [ 7.591848] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error [ 7.591860] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20130117/ac-122) [ 7.599292] ACPI: Battery Slot [BAT0] (battery present) [ 7.610845] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 [ 7.611117] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 7.633578] ACPI: acpi_idle registered with cpuidle [ 7.695702] acpi-cpufreq: overriding BIOS provided _PSD data [ 7.720253] wmi: Mapper loaded [ 7.738685] media: Linux media interface: v0.10 [ 7.793234] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20130117/utaddress-251) [ 7.793264] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.799875] Linux video capture interface: v2.00 [ 7.832859] [drm] Initialized drm 1.1.0 20060810 [ 7.868401] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400, board id: 2068, fw id: 1028260 [ 7.897654] uvcvideo: Found UVC 1.00 device HP Truevision HD (0bda:58de) [ 7.909665] input: HP Truevision HD as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input9 [ 7.910052] usbcore: registered new interface driver uvcvideo [ 7.910060] USB Video Class driver (1.1.1) [ 7.914068] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 8.154502] cfg80211: Calling CRDA to update world regulatory domain [ 8.212703] [drm] radeon kernel modesetting enabled. [ 8.212872] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree. [ 8.263900] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 8.292659] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20130117/dsopcode-236) [ 8.292688] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801026c6c18), AE_AML_BUFFER_LIMIT (20130117/psparse-537) [ 8.292725] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801026c8358), AE_AML_BUFFER_LIMIT (20130117/psparse-537) [ 8.293437] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20130117/dsopcode-236) [ 8.293459] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801026c6c18), AE_AML_BUFFER_LIMIT (20130117/psparse-537) [ 8.293491] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801026c8358), AE_AML_BUFFER_LIMIT (20130117/psparse-537) [ 8.478306] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3290, rf: 3290, rev: 0015. [ 8.537856] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.374153] cfg80211: World regulatory domain updated: [ 9.374171] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.374181] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.374190] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.374198] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.374205] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.374213] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.339450] Adding 6370300k swap on /dev/sda6. Priority:-1 extents:1 across:6370300k [ 11.405186] EXT4-fs (sda10): re-mounted. Opts: (null) [ 11.737564] EXT4-fs (sda10): re-mounted. Opts: errors=remount-ro [ 11.961439] fuse init (API version 7.21) [ 14.835725] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw into memory [ 15.028435] r8169 0000:03:00.0 eth0: link down [ 15.028640] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.212553] RPC: Registered named UNIX socket transport module. [ 15.212568] RPC: Registered udp transport module. [ 15.212574] RPC: Registered tcp transport module. [ 15.212581] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.264440] FS-Cache: Loaded [ 15.278630] Key type dns_resolver registered [ 15.313598] FS-Cache: Netfs 'nfs' registered for caching [ 15.364823] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 18.906057] Bluetooth: Core ver 2.16 [ 18.906134] NET: Registered protocol family 31 [ 18.906143] Bluetooth: HCI device and connection manager initialized [ 18.906171] Bluetooth: HCI socket layer initialized [ 18.906182] Bluetooth: L2CAP socket layer initialized [ 18.906207] Bluetooth: SCO socket layer initialized [ 18.988499] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.988514] Bluetooth: BNEP filters: protocol multicast [ 18.988544] Bluetooth: BNEP socket layer initialized [ 19.154673] Bluetooth: RFCOMM TTY layer initialized [ 19.154718] Bluetooth: RFCOMM socket layer initialized [ 19.154726] Bluetooth: RFCOMM ver 1.11

Une ligne revient souvent :

ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20130117/dsopcode-236) [ 8.292688] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801026c6c18), AE_AML_BUFFER_LIMIT (20130117/psparse-537) [ 8.292725] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801026c8358), AE_AML_BUFFER_LIMIT (20130117/psparse-537) [ 8.293437] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20130117/dsopcode-236) [ 8.293459] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801026c6c18), AE_AML_BUFFER_LIMIT (20130117/psparse-537) [ 8.293491] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8801026c8358), AE_AML_BUFFER_LIMIT (20130117/psparse-537)

Mais y a t’ il vraiment un rapport avec mon problème ?

Bon appétit, bon après midi.

#10

rien d’anormal concernant le BT dans ton dmesg (pas de warning sur un firmware manquant ou défectueux pour le BT).

#11

Mais que signifient alors ces messages :

Jul 10 09:31:39 jessie bluetoothd[3571]: Failed to init alert plugin Jul 10 09:31:39 jessie bluetoothd[3571]: Failed to init time plugin Jul 10 09:31:39 jessie bluetoothd[3571]: Failed to init gatt_example plugin

Pourquoi je n’ ai pas de ligne “kernell in use” face au bluetooth ?

Ce device wifi / bluetooth ne fonctionne pas nativement sous Debian. Il faut lui donner le firmware comme je l’ ai indiqué plus haut. Mais seul le wifi fonctionne ! Sous Ubuntu un bug est lancé sur Launchpad.

Bon après midi.

#12

J’ignore ce que veulent dire ces lignes, mais certainement la conséquence d’un autre problème.
Pour plus de détails sur les problème que rencontre bluetoothd, lance le en mode debug

Le firmware que tu as utilisé est issu d’un paquet debian. Rien ne garanti que ce soit le même que celui fourni par ubuntu.
Essaie de voir si le constructeur n’en fourni pas une version plus à jour.

#13

Bonsoir,
Voici le retour :

root@jessie:/home/casper# bluetoothd -n -d bluetoothd[3488]: Bluetooth daemon 4.99 bluetoothd[3488]: src/main.c:parse_config() parsing main.conf bluetoothd[3488]: src/main.c:parse_config() discovto=0 bluetoothd[3488]: src/main.c:parse_config() pairto=0 bluetoothd[3488]: src/main.c:parse_config() pageto=8192 bluetoothd[3488]: src/main.c:parse_config() auto_to=60 bluetoothd[3488]: src/main.c:parse_config() name=%h-%d bluetoothd[3488]: src/main.c:parse_config() class=0x000100 bluetoothd[3488]: src/main.c:parse_config() discov_interval=30 bluetoothd[3488]: src/main.c:parse_config() Key file does not have key 'DeviceID' D-Bus setup failed: Name already in use bluetoothd[3488]: Unable to get on D-Bus

La dernière ligne m’ a mené vers un bug, ou bien d’ autres posts, mais je n’ ai rien de concluant.

#14

Re,
Ca y est, ça fonctionne : bugs.launchpad.net/ubuntu/+sour … omments/44

#15

Il ne reste plus qu’a suivre le bug, et lorsqu’il sera corrigé dans le paquet debian, revenir au paquet debian pour suivre les évolutions.

#16

Fausse joie… Un reboot et le bluetooth ne fonctionne plus de nouveau !

#17

vérifie que le nouveau module que tu as installé est bien chargé au boot (lsmod)

#18

Merci pour ta réponse, il semble que oui :

bluetooth 247165 14 bnep,rfcomm,rtbth

#19

j’ai pas tout suivi la manip que tu as fais, mais vérifie aussi que l’ancien modules n’est pas lui aussi chargé.

#20

La manip faite est celle là (après avoir téléchargé le paquet compressé) :

mv rtbth-3.9.3.dkms.tar.gz /usr/src cd /usr/src sudo tar -zxvf rtbth-3.9.3.dkms.tar.gz sudo dkms install -m rtbth -v 3.9.3 sudo modprobe rtbth
Aussitôt après, le bouton wifi / bluetooth reprends vie, le bluetooth refonctionne.

Mais d’ après le lsmod, d’ autres modules semblent être chargés :

Il faut que je blacklist les deux autres (bnep,rfcomm)?

Bonne journée.