Carte graphique expérience restreint

Support Debian
#1

Bonjour, je viens de changer d’ordinateur et par la même occasion j’ai réinstallé debian. Le problème est que mon ordinateur portable (MSI GT70 2OD) est équipé de la technologie optimus qui permet de switcher entre la carte graphique intel intégré et la carte graphique nvidia (gtx 770m).

Du coup ça m’a compliqué les choses et j’ai réussis à démarrer en mode nomodeset, une fois accès au terminal j’ai réussis à installer Bumblebee qui permet de gérer la technologie optimus, du coup j’ai ajouté le dépôt wheezy-backports à mon fichier source.list et installer bumblebee avec les pilotes libre :

apt-get install -t wheezy-backports bumblebee primus

Cela à bien fonctionner et maintenant j’arrive à démarrer sans le mode nomodeset mais les pilotes n’ont pas l’air de bien fonctionner car je me retrouve avec un gnome tout moche, des gros carrés et une interface bien dégueulasse.

Du coup je sais plus quoi faire, j’ai mis à jour tout mes paquets, l’installation est propre et j’ai juste installer bumblebee, que faire maintenant?

Merci d’avance.

#2

Je connais à peine bumblebee, donc j’ignore comment on peut procéder.

Je te suggère de zieuter dans les logs en quête d’indices:
/var/log/Xorg.0.log
dmesg
~/.xsession-errors

D’autres personnes que toi et ayant le même chipset ont sans doute pu rencontrer un problème similaire.

#3

Je met ici mes logs :

- /var/log/Xorg.0.log :

[code][ 15.110]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 15.110] X Protocol Version 11, Revision 0
[ 15.110] Build Operating System: Linux 3.16-2-amd64 x86_64 Debian
[ 15.110] Current Operating System: Linux Guillaume 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt2-1~bpo70+1 (2014-12-08) x86_64
[ 15.110] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-0.bpo.4-amd64 root=UUID=d57881d7-0f60-4334-b4ee-65563a38315c ro quiet
[ 15.110] Build Date: 09 December 2014 09:12:48PM
[ 15.110] xorg-server 2:1.12.4-6+deb7u5 (Moritz Muehlenhoff jmm@debian.org)
[ 15.110] Current version of pixman: 0.26.0
[ 15.110] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.110] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.110] (==) Log file: “/var/log/Xorg.0.log”, Time: Mon Feb 2 16:11:48 2015
[ 15.153] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 15.190] (==) No Layout section. Using the first Screen section.
[ 15.190] (==) No screen section available. Using defaults.
[ 15.190] () |–>Screen “Default Screen Section” (0)
[ 15.190] (**) | |–>Monitor “”
[ 15.190] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[ 15.190] (==) Automatically adding devices
[ 15.190] (==) Automatically enabling devices
[ 15.291] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
[ 15.291] Entry deleted from font path.
[ 15.332] (WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
[ 15.332] Entry deleted from font path.
[ 15.332] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 15.332] (==) ModulePath set to “/usr/lib/xorg/modules”
[ 15.332] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.332] (II) Loader magic: 0x7fc0e694fae0
[ 15.332] (II) Module ABI versions:
[ 15.332] X.Org ANSI C Emulation: 0.4
[ 15.332] X.Org Video Driver: 12.1
[ 15.332] X.Org XInput driver : 16.0
[ 15.332] X.Org Server Extension : 6.0
[ 15.333] (–) PCI:*(0:0:2:0) 8086:0416:1462:10ea rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 15.333] (–) PCI: (0:1:0:0) 10de:119f:1462:10ea rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x???/524288
[ 15.333] (II) Open ACPI successful (/var/run/acpid.socket)
[ 15.333] (II) LoadModule: “extmod”
[ 15.341] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.359] (II) Module extmod: vendor=“X.Org Foundation”
[ 15.359] compiled for 1.12.4, module version = 1.0.0
[ 15.359] Module class: X.Org Server Extension
[ 15.359] ABI class: X.Org Server Extension, version 6.0
[ 15.359] (II) Loading extension SELinux
[ 15.359] (II) Loading extension MIT-SCREEN-SAVER
[ 15.359] (II) Loading extension XFree86-VidModeExtension
[ 15.359] (II) Loading extension XFree86-DGA
[ 15.359] (II) Loading extension DPMS
[ 15.359] (II) Loading extension XVideo
[ 15.359] (II) Loading extension XVideo-MotionCompensation
[ 15.359] (II) Loading extension X-Resource
[ 15.359] (II) LoadModule: “dbe”
[ 15.359] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.360] (II) Module dbe: vendor=“X.Org Foundation”
[ 15.360] compiled for 1.12.4, module version = 1.0.0
[ 15.360] Module class: X.Org Server Extension
[ 15.360] ABI class: X.Org Server Extension, version 6.0
[ 15.360] (II) Loading extension DOUBLE-BUFFER
[ 15.360] (II) LoadModule: “glx”
[ 15.360] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.368] (II) Module glx: vendor=“X.Org Foundation”
[ 15.368] compiled for 1.12.4, module version = 1.0.0
[ 15.368] ABI class: X.Org Server Extension, version 6.0
[ 15.368] (==) AIGLX enabled
[ 15.368] (II) Loading extension GLX
[ 15.368] (II) LoadModule: “record”
[ 15.368] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.368] (II) Module record: vendor=“X.Org Foundation”
[ 15.368] compiled for 1.12.4, module version = 1.13.0
[ 15.368] Module class: X.Org Server Extension
[ 15.368] ABI class: X.Org Server Extension, version 6.0
[ 15.368] (II) Loading extension RECORD
[ 15.368] (II) LoadModule: “dri”
[ 15.368] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.396] (II) Module dri: vendor=“X.Org Foundation”
[ 15.396] compiled for 1.12.4, module version = 1.0.0
[ 15.396] ABI class: X.Org Server Extension, version 6.0
[ 15.396] (II) Loading extension XFree86-DRI
[ 15.396] (II) LoadModule: “dri2”
[ 15.396] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.396] (II) Module dri2: vendor=“X.Org Foundation”
[ 15.396] compiled for 1.12.4, module version = 1.2.0
[ 15.396] ABI class: X.Org Server Extension, version 6.0
[ 15.396] (II) Loading extension DRI2
[ 15.396] (==) Matched intel as autoconfigured driver 0
[ 15.396] (==) Matched vesa as autoconfigured driver 1
[ 15.396] (==) Matched fbdev as autoconfigured driver 2
[ 15.396] (==) Assigned the driver to the xf86ConfigLayout
[ 15.396] (II) LoadModule: “intel”
[ 15.396] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 15.426] (II) Module intel: vendor=“X.Org Foundation”
[ 15.426] compiled for 1.12.3.902, module version = 2.19.0
[ 15.426] Module class: X.Org Video Driver
[ 15.426] ABI class: X.Org Video Driver, version 12.1
[ 15.426] (II) LoadModule: “vesa”
[ 15.426] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 15.440] (II) Module vesa: vendor=“X.Org Foundation”
[ 15.440] compiled for 1.12.1, module version = 2.3.1
[ 15.440] Module class: X.Org Video Driver
[ 15.440] ABI class: X.Org Video Driver, version 12.0
[ 15.440] (II) LoadModule: “fbdev”
[ 15.440] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 15.448] (II) Module fbdev: vendor=“X.Org Foundation”
[ 15.448] compiled for 1.12.1, module version = 0.4.2
[ 15.448] ABI class: X.Org Video Driver, version 12.0
[ 15.448] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 15.448] (II) VESA: driver for VESA chipsets: vesa
[ 15.448] (II) FBDEV: driver for framebuffer: fbdev
[ 15.448] (++) using VT number 7

[ 15.451] vesa: Ignoring device with a bound kernel driver
[ 15.451] (WW) Falling back to old probe method for vesa
[ 15.451] (II) Loading sub module “fbdevhw”
[ 15.451] (II) LoadModule: “fbdevhw”
[ 15.452] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 15.455] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 15.455] compiled for 1.12.4, module version = 0.0.2
[ 15.455] ABI class: X.Org Video Driver, version 12.1
[ 15.455] () FBDEV(1): claimed PCI slot 0@0:2:0
[ 15.455] (II) FBDEV(1): using default device
[ 15.455] (II) FBDEV(1): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.455] (==) FBDEV(1): Depth 24, (==) framebuffer bpp 32
[ 15.455] (==) FBDEV(1): RGB weight 888
[ 15.455] (==) FBDEV(1): Default visual is TrueColor
[ 15.455] (==) FBDEV(1): Using gamma correction (1.0, 1.0, 1.0)
[ 15.455] (II) FBDEV(1): hardware: inteldrmfb (video memory: 8100kB)
[ 15.455] (II) FBDEV(1): checking modes against framebuffer device…
[ 15.455] (II) FBDEV(1): checking modes against monitor…
[ 15.455] (–) FBDEV(1): Virtual size is 1920x1080 (pitch 1920)
[ 15.455] () FBDEV(1): Built-in mode “current”
[ 15.455] (==) FBDEV(1): DPI set to (96, 96)
[ 15.455] (II) Loading sub module “fb”
[ 15.455] (II) LoadModule: “fb”
[ 15.455] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.456] (II) Module fb: vendor=“X.Org Foundation”
[ 15.456] compiled for 1.12.4, module version = 1.0.0
[ 15.456] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.456] () FBDEV(1): using shadow framebuffer
[ 15.456] (II) Loading sub module “shadow”
[ 15.456] (II) LoadModule: “shadow”
[ 15.456] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 15.457] (II) Module shadow: vendor=“X.Org Foundation”
[ 15.457] compiled for 1.12.4, module version = 1.1.0
[ 15.457] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.457] (II) UnloadModule: “vesa”
[ 15.457] (II) UnloadModule: “intel”
[ 15.457] (II) Unloading intel
[ 15.457] (==) Depth 24 pixmap format is 32 bpp
[ 16.526] (==) FBDEV(0): Backing store disabled
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.527] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 16.528] (==) FBDEV(0): DPMS enabled
[ 16.528] (==) RandR enabled
[ 16.528] (II) Initializing built-in extension Generic Event Extension
[ 16.528] (II) Initializing built-in extension SHAPE
[ 16.528] (II) Initializing built-in extension MIT-SHM
[ 16.528] (II) Initializing built-in extension XInputExtension
[ 16.528] (II) Initializing built-in extension XTEST
[ 16.528] (II) Initializing built-in extension BIG-REQUESTS
[ 16.528] (II) Initializing built-in extension SYNC
[ 16.528] (II) Initializing built-in extension XKEYBOARD
[ 16.528] (II) Initializing built-in extension XC-MISC
[ 16.528] (II) Initializing built-in extension SECURITY
[ 16.528] (II) Initializing built-in extension XINERAMA
[ 16.528] (II) Initializing built-in extension XFIXES
[ 16.528] (II) Initializing built-in extension RENDER
[ 16.528] (II) Initializing built-in extension RANDR
[ 16.528] (II) Initializing built-in extension COMPOSITE
[ 16.528] (II) Initializing built-in extension DAMAGE
[ 16.528] (II) SELinux: Disabled on system
[ 16.533] (II) AIGLX: Screen 0 is not DRI2 capable
[ 16.533] (II) AIGLX: Screen 0 is not DRI capable
[ 16.748] (II) AIGLX: Loaded and initialized swrast
[ 16.748] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 17.124] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 17.124] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 17.124] (II) LoadModule: “evdev”
[ 17.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17.140] (II) Module evdev: vendor=“X.Org Foundation”
[ 17.140] compiled for 1.12.1, module version = 2.7.0
[ 17.140] Module class: X.Org XInput Driver
[ 17.140] ABI class: X.Org XInput driver, version 16.0
[ 17.140] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 17.140] () Power Button: always reports core events
[ 17.140] () evdev: Power Button: Device: “/dev/input/event3”
[ 17.140] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 17.140] (–) evdev: Power Button: Found keys
[ 17.140] (II) evdev: Power Button: Configuring as keyboard
[ 17.140] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3”
[ 17.140] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
[ 17.140] () Option “xkb_rules” “evdev”
[ 17.140] () Option “xkb_model” “pc105”
[ 17.140] () Option “xkb_layout” “fr”
[ 17.140] () Option “xkb_variant” “latin9”
[ 17.162] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 17.162] () Video Bus: Applying InputClass “evdev keyboard catchall”
[ 17.162] (II) Using input driver ‘evdev’ for ‘Video Bus’
[ 17.162] () Video Bus: always reports core events
[ 17.162] () evdev: Video Bus: Device: “/dev/input/event13”
[ 17.162] (–) evdev: Video Bus: Vendor 0 Product 0x6
[ 17.162] (–) evdev: Video Bus: Found keys
[ 17.162] (II) evdev: Video Bus: Configuring as keyboard
[ 17.162] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13”
[ 17.162] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD, id 7)
[ 17.162] () Option “xkb_rules” “evdev”
[ 17.162] () Option “xkb_model” “pc105”
[ 17.162] () Option “xkb_layout” “fr”
[ 17.162] () Option “xkb_variant” “latin9”
[ 17.162] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 17.162] (II) No input driver specified, ignoring this device.
[ 17.162] (II) This device may have been added with another device file.
[ 17.162] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 17.162] () Video Bus: Applying InputClass “evdev keyboard catchall”
[ 17.162] (II) Using input driver ‘evdev’ for ‘Video Bus’
[ 17.162] () Video Bus: always reports core events
[ 17.162] () evdev: Video Bus: Device: “/dev/input/event12”
[ 17.162] (–) evdev: Video Bus: Vendor 0 Product 0x6
[ 17.162] (–) evdev: Video Bus: Found keys
[ 17.162] (II) evdev: Video Bus: Configuring as keyboard
[ 17.162] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:00/input/input13/event12”
[ 17.162] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD, id 8)
[ 17.162] () Option “xkb_rules” “evdev”
[ 17.162] () Option “xkb_model” “pc105”
[ 17.162] () Option “xkb_layout” “fr”
[ 17.162] () Option “xkb_variant” “latin9”
[ 17.162] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 17.162] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 17.162] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 17.162] () Power Button: always reports core events
[ 17.162] () evdev: Power Button: Device: “/dev/input/event2”
[ 17.162] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 17.162] (–) evdev: Power Button: Found keys
[ 17.162] (II) evdev: Power Button: Configuring as keyboard
[ 17.162] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2”
[ 17.162] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 9)
[ 17.162] () Option “xkb_rules” “evdev”
[ 17.162] () Option “xkb_model” “pc105”
[ 17.162] () Option “xkb_layout” “fr”
[ 17.162] () Option “xkb_variant” “latin9”
[ 17.163] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event11)
[ 17.163] () BisonCam, NB Pro: Applying InputClass “evdev keyboard catchall”
[ 17.163] (II) Using input driver ‘evdev’ for ‘BisonCam, NB Pro’
[ 17.163] () BisonCam, NB Pro: always reports core events
[ 17.163] () evdev: BisonCam, NB Pro: Device: “/dev/input/event11”
[ 17.163] (–) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x14c
[ 17.163] (–) evdev: BisonCam, NB Pro: Found keys
[ 17.163] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 17.163] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input12/event11”
[ 17.163] (II) XINPUT: Adding extended input device “BisonCam, NB Pro” (type: KEYBOARD, id 10)
[ 17.163] () Option “xkb_rules” “evdev”
[ 17.163] () Option “xkb_model” “pc105”
[ 17.163] () Option “xkb_layout” “fr”
[ 17.163] () Option “xkb_variant” “latin9”
[ 17.163] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[ 17.163] (II) No input driver specified, ignoring this device.
[ 17.163] (II) This device may have been added with another device file.
[ 17.163] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 17.163] (II) No input driver specified, ignoring this device.
[ 17.163] (II) This device may have been added with another device file.
[ 17.163] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 17.163] (II) No input driver specified, ignoring this device.
[ 17.163] (II) This device may have been added with another device file.
[ 17.163] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[ 17.163] (II) No input driver specified, ignoring this device.
[ 17.163] (II) This device may have been added with another device file.
[ 17.163] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 17.163] () AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
[ 17.163] (II) Using input driver ‘evdev’ for ‘AT Translated Set 2 keyboard’
[ 17.163] () AT Translated Set 2 keyboard: always reports core events
[ 17.163] () evdev: AT Translated Set 2 keyboard: Device: “/dev/input/event0”
[ 17.163] (–) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 17.163] (–) evdev: AT Translated Set 2 keyboard: Found keys
[ 17.163] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 17.163] () Option “config_info” “udev:/sys/devices/platform/i8042/serio0/input/input0/event0”
[ 17.163] (II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD, id 11)
[ 17.163] () Option “xkb_rules” “evdev”
[ 17.163] () Option “xkb_model” “pc105”
[ 17.163] () Option “xkb_layout” “fr”
[ 17.163] () Option “xkb_variant” “latin9”
[ 17.163] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 17.164] () SynPS/2 Synaptics TouchPad: Applying InputClass “evdev touchpad catchall”
[ 17.164] () SynPS/2 Synaptics TouchPad: Applying InputClass “touchpad catchall”
[ 17.164] () SynPS/2 Synaptics TouchPad: Applying InputClass “Default clickpad buttons”
[ 17.164] (II) LoadModule: “synaptics”
[ 17.164] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 17.189] (II) Module synaptics: vendor=“X.Org Foundation”
[ 17.189] compiled for 1.12.4, module version = 1.6.2
[ 17.189] Module class: X.Org XInput Driver
[ 17.189] ABI class: X.Org XInput driver, version 16.0
[ 17.189] (II) Using input driver ‘synaptics’ for ‘SynPS/2 Synaptics TouchPad’
[ 17.189] () SynPS/2 Synaptics TouchPad: always reports core events
[ 17.189] () Option “Device” “/dev/input/event10”
[ 17.300] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 17.300] (–) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692
[ 17.300] (–) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680
[ 17.300] (–) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 17.300] (–) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 17.300] (–) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 17.300] (–) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 17.300] (–) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 17.300] () SynPS/2 Synaptics TouchPad: always reports core events
[ 17.364] () Option “config_info” “udev:/sys/devices/platform/i8042/serio1/input/input6/event10”
[ 17.364] (II) XINPUT: Adding extended input device “SynPS/2 Synaptics TouchPad” (type: TOUCHPAD, id 12)
[ 17.364] () synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 17.364] () synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 17.364] () synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 17.364] () SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 17.364] () SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 17.364] () SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 17.364] () SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 17.364] (–) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 17.364] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 17.364] () SynPS/2 Synaptics TouchPad: Ignoring device from InputClass “touchpad ignore duplicates”
[ 17.364] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 17.364] (II) No input driver specified, ignoring this device.
[ 17.364] (II) This device may have been added with another device file.
[ 17.364] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
[ 17.364] () ACPI Virtual Keyboard Device: Applying InputClass “evdev keyboard catchall”
[ 17.364] (II) Using input driver ‘evdev’ for ‘ACPI Virtual Keyboard Device’
[ 17.364] () ACPI Virtual Keyboard Device: always reports core events
[ 17.364] () evdev: ACPI Virtual Keyboard Device: Device: “/dev/input/event14”
[ 17.364] (–) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 17.364] (–) evdev: ACPI Virtual Keyboard Device: Found keys
[ 17.364] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 17.364] () Option “config_info” “udev:/sys/devices/virtual/input/input15/event14”
[ 17.364] (II) XINPUT: Adding extended input device “ACPI Virtual Keyboard Device” (type: KEYBOARD, id 13)
[ 17.364] () Option “xkb_rules” “evdev”
[ 17.365] () Option “xkb_model” “pc105”
[ 17.365] () Option “xkb_layout” “fr”
[ 17.365] () Option “xkb_variant” “latin9”
[ 17.365] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event5)
[ 17.365] () MSI WMI hotkeys: Applying InputClass “evdev keyboard catchall”
[ 17.365] (II) Using input driver ‘evdev’ for ‘MSI WMI hotkeys’
[ 17.365] () MSI WMI hotkeys: always reports core events
[ 17.365] () evdev: MSI WMI hotkeys: Device: “/dev/input/event5”
[ 17.365] (–) evdev: MSI WMI hotkeys: Vendor 0 Product 0
[ 17.365] (–) evdev: MSI WMI hotkeys: Found keys
[ 17.365] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
[ 17.365] () Option “config_info” “udev:/sys/devices/virtual/input/input7/event5”
[ 17.365] (II) XINPUT: Adding extended input device “MSI WMI hotkeys” (type: KEYBOARD, id 14)
[ 17.365] () Option “xkb_rules” “evdev”
[ 17.365] () Option “xkb_model” “pc105”
[ 17.365] () Option “xkb_layout” “fr”
[ 17.365] () Option “xkb_variant” “latin9”
[ 49.480] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T.5 Mouse (/dev/input/mouse1)
[ 49.480] (II) No input driver specified, ignoring this device.
[ 49.480] (II) This device may have been added with another device file.
[ 49.480] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T.5 Mouse (/dev/input/event15)
[ 49.480] () Mad Catz Mad Catz R.A.T.5 Mouse: Applying InputClass “evdev pointer catchall”
[ 49.480] (II) Using input driver ‘evdev’ for ‘Mad Catz Mad Catz R.A.T.5 Mouse’
[ 49.480] () Mad Catz Mad Catz R.A.T.5 Mouse: always reports core events
[ 49.480] () evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Device: “/dev/input/event15”
[ 49.480] (–) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Vendor 0x738 Product 0x1705
[ 49.480] (–) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Found 17 mouse buttons
[ 49.480] (–) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Found scroll wheel(s)
[ 49.480] (–) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Found relative axes
[ 49.480] (–) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Found x and y relative axes
[ 49.480] (II) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Configuring as mouse
[ 49.480] (II) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: Adding scrollwheel support
[ 49.480] () evdev: Mad Catz Mad Catz R.A.T.5 Mouse: YAxisMapping: buttons 4 and 5
[ 49.480] () evdev: Mad Catz Mad Catz R.A.T.5 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 49.480] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0738:1705.0002/input/input16/event15”
[ 49.480] (II) XINPUT: Adding extended input device “Mad Catz Mad Catz R.A.T.5 Mouse” (type: MOUSE, id 15)
[ 49.480] (II) evdev: Mad Catz Mad Catz R.A.T.5 Mouse: initialized for relative axes.
[ 49.480] () Mad Catz Mad Catz R.A.T.5 Mouse: (accel) keeping acceleration scheme 1
[ 49.480] () Mad Catz Mad Catz R.A.T.5 Mouse: (accel) acceleration profile 0
[ 49.480] () Mad Catz Mad Catz R.A.T.5 Mouse: (accel) acceleration factor: 2.000
[ 49.480] () Mad Catz Mad Catz R.A.T.5 Mouse: (accel) acceleration threshold: 4[/code]

#4

- ensuite dmesg :

t pref] [ 0.419547] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.419549] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.419553] pci 0000:00:1c.0: bridge window [mem 0xaf200000-0xaf3fffff] [ 0.419556] pci 0000:00:1c.0: bridge window [mem 0xaf400000-0xaf5fffff 64bit pref] [ 0.419561] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.419563] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.419567] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff] [ 0.419572] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.419575] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff] [ 0.419581] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.419585] pci 0000:00:1c.4: bridge window [mem 0xf7800000-0xf78fffff] [ 0.419591] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.419592] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.419593] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.419594] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.419595] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.419596] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.419597] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.419597] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.419598] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.419599] pci_bus 0000:00: resource 13 [mem 0xaf200000-0xfeafffff] [ 0.419600] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.419601] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.419602] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.419603] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.419604] pci_bus 0000:02: resource 1 [mem 0xaf200000-0xaf3fffff] [ 0.419604] pci_bus 0000:02: resource 2 [mem 0xaf400000-0xaf5fffff 64bit pref] [ 0.419605] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.419606] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff] [ 0.419607] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.419608] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.419677] NET: Registered protocol family 2 [ 0.419863] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.419985] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.420156] TCP: Hash tables configured (established 65536 bind 65536) [ 0.420170] TCP: reno registered [ 0.420177] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.420205] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.420287] NET: Registered protocol family 1 [ 0.420296] pci 0000:00:02.0: Video device with shadowed ROM [ 0.459184] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.459193] PCI: CLS 64 bytes, default 64 [ 0.459226] Unpacking initramfs... [ 0.618914] Freeing initrd memory: 13768K (ffff88003650c000 - ffff88003727e000) [ 0.618993] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.618995] software IO TLB [mem 0xa5446000-0xa9446000] (64MB) mapped at [ffff8800a5446000-ffff8800a9445fff] [ 0.619232] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.619268] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x8 [ 0.619274] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x8 [ 0.619280] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x8 [ 0.619285] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x8 [ 0.619292] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x8 [ 0.619297] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x8 [ 0.619303] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x8 [ 0.619309] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x8 [ 0.619342] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.619566] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.619611] audit: initializing netlink subsys (disabled) [ 0.619623] audit: type=2000 audit(1422893493.608:1): initialized [ 0.619831] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.619844] zbud: loaded [ 0.620014] VFS: Disk quotas dquot_6.5.2 [ 0.620030] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.620070] msgmni has been set to 15777 [ 0.620312] alg: No test for stdrng (krng) [ 0.620337] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.620387] io scheduler noop registered [ 0.620390] io scheduler deadline registered [ 0.620423] io scheduler cfq registered (default) [ 0.620552] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 0.620860] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.620870] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.620898] intel_idle: MWAIT substates: 0x42120 [ 0.620899] intel_idle: v0.4 model 0x3C [ 0.620900] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.621138] GHES: HEST is not enabled! [ 0.621189] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.621499] Linux agpgart interface v0.103 [ 0.621586] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.631915] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.631917] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.631997] mousedev: PS/2 mouse device common for all mice [ 0.632546] rtc_cmos 00:02: RTC can wake from S4 [ 0.632646] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.632670] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.632677] Intel P-state driver initializing. [ 0.632684] Intel pstate controlling: cpu 0 [ 0.632699] Intel pstate controlling: cpu 1 [ 0.632713] Intel pstate controlling: cpu 2 [ 0.632726] Intel pstate controlling: cpu 3 [ 0.632740] Intel pstate controlling: cpu 4 [ 0.632755] Intel pstate controlling: cpu 5 [ 0.632768] Intel pstate controlling: cpu 6 [ 0.632781] Intel pstate controlling: cpu 7 [ 0.632854] ledtrig-cpu: registered to indicate activity on CPUs [ 0.633779] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 0.633782] AMD IOMMUv2 functionality not available on this system [ 0.633987] TCP: cubic registered [ 0.634159] NET: Registered protocol family 10 [ 0.634671] mip6: Mobile IPv6 [ 0.634679] NET: Registered protocol family 17 [ 0.634691] mpls_gso: MPLS GSO support [ 0.635979] registered taskstats version 1 [ 0.637702] rtc_cmos 00:02: setting system clock to 2015-02-02 16:11:34 UTC (1422893494) [ 0.637923] PM: Hibernation image not present or could not be loaded. [ 0.640351] Freeing unused kernel memory: 1200K (ffffffff818ec000 - ffffffff81a18000) [ 0.640355] Write protecting the kernel read-only data: 8192k [ 0.643142] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.644177] Freeing unused kernel memory: 704K (ffff880001550000 - ffff880001600000) [ 0.645120] Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000) [ 0.653425] udevd[89]: starting version 175 [ 0.665102] ACPI: Fan [FAN0] (off) [ 0.665168] ACPI: Fan [FAN1] (off) [ 0.665213] ACPI: Fan [FAN2] (off) [ 0.665251] ACPI: Fan [FAN3] (off) [ 0.665288] ACPI: Fan [FAN4] (off) [ 0.669797] ACPI: bus type USB registered [ 0.669839] usbcore: registered new interface driver usbfs [ 0.669856] usbcore: registered new interface driver hub [ 0.672839] usbcore: registered new device driver usb [ 0.673299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.673485] ehci-pci: EHCI PCI platform driver [ 0.675564] rtsx_pci 0000:05:00.0: irq 43 for MSI/MSI-X [ 0.675579] rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43 [ 0.676259] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.676269] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.676288] ehci-pci 0000:00:1a.0: debug port 2 [ 0.680371] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.680781] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7b18000 [ 0.680914] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.680916] ACPI: Thermal Zone [TZ00] (28 C) [ 0.681139] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.681140] ACPI: Thermal Zone [TZ01] (30 C) [ 0.681977] SCSI subsystem initialized [ 0.684476] libata version 3.00 loaded. [ 0.685201] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:41:0a:ac] [ 0.691050] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.691078] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.691079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.691080] usb usb1: Product: EHCI Host Controller [ 0.691081] usb usb1: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 ehci_hcd [ 0.691082] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.691166] hub 1-0:1.0: USB hub found [ 0.691169] hub 1-0:1.0: 2 ports detected [ 0.691233] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.691235] ACPI: Thermal Zone [THRM] (48 C) [ 0.691344] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.691347] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.691358] ehci-pci 0000:00:1d.0: debug port 2 [ 0.695253] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.695271] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7b17000 [ 0.707025] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.707050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.707052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.707053] usb usb2: Product: EHCI Host Controller [ 0.707054] usb usb2: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 ehci_hcd [ 0.707055] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.707149] hub 2-0:1.0: USB hub found [ 0.707153] hub 2-0:1.0: 2 ports detected [ 0.707384] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.707391] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.707483] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.707503] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X [ 0.707624] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.707626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.707627] usb usb3: Product: xHCI Host Controller [ 0.707628] usb usb3: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 xhci_hcd [ 0.707629] usb usb3: SerialNumber: 0000:00:14.0 [ 0.707750] hub 3-0:1.0: USB hub found [ 0.707774] hub 3-0:1.0: 14 ports detected [ 0.709932] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.709935] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.710335] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.710348] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.710349] usb usb4: Product: xHCI Host Controller [ 0.710350] usb usb4: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 xhci_hcd [ 0.710351] usb usb4: SerialNumber: 0000:00:14.0 [ 0.710561] hub 4-0:1.0: USB hub found [ 0.710596] hub 4-0:1.0: 6 ports detected [ 0.711624] ahci 0000:00:1f.2: version 3.0 [ 0.711735] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 0.711774] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x26 impl SATA mode [ 0.711776] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.727556] scsi0 : ahci [ 0.727735] scsi1 : ahci [ 0.727863] scsi2 : ahci [ 0.727972] scsi3 : ahci [ 0.728061] scsi4 : ahci [ 0.728145] scsi5 : ahci [ 0.728175] ata1: DUMMY [ 0.728178] ata2: SATA max UDMA/133 abar m2048@0xf7b16000 port 0xf7b16180 irq 45 [ 0.728180] ata3: SATA max UDMA/133 abar m2048@0xf7b16000 port 0xf7b16200 irq 45 [ 0.728180] ata4: DUMMY [ 0.728181] ata5: DUMMY [ 0.728183] ata6: SATA max UDMA/133 abar m2048@0xf7b16000 port 0xf7b16380 irq 45 [ 1.003007] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.046974] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.046992] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.047008] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.047660] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.047663] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.047665] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.048306] ata2.00: ATA-8: HGST HTS721010A9E630, JB0OA3B0, max UDMA/133 [ 1.048308] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.048316] ata3.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133 [ 1.048319] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.048595] ata6.00: ATA-8: SanDisk SDSSDHP128G, X2316RL, max UDMA/133 [ 1.048597] ata6.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.049409] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.049414] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.049417] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.049619] ata3.00: configured for UDMA/133 [ 1.049662] ata2.00: configured for UDMA/133 [ 1.049754] scsi 1:0:0:0: Direct-Access ATA HGST HTS721010A9 A3B0 PQ: 0 ANSI: 5 [ 1.050092] scsi 2:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5 [ 1.050284] ata6.00: configured for UDMA/133 [ 1.050427] scsi 5:0:0:0: Direct-Access ATA SanDisk SDSSDHP1 6RL PQ: 0 ANSI: 5 [ 1.054281] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.054284] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.054303] sd 1:0:0:0: [sda] Write Protect is off [ 1.054304] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.054307] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.054309] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 1.054310] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.054312] sd 5:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.054405] sd 2:0:0:0: [sdb] Write Protect is off [ 1.054407] sd 5:0:0:0: [sdc] Write Protect is off [ 1.054409] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.054410] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.054434] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.054440] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.054791] sdc: sdc1 [ 1.055008] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.135361] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.135364] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.135711] hub 1-1:1.0: USB hub found [ 1.135813] hub 1-1:1.0: 6 ports detected [ 1.157602] sdb: sdb1 sdb2 < sdb5 > [ 1.158220] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.302913] usb 3-8: new full-speed USB device number 2 using xhci_hcd [ 1.342090] sda: sda1 [ 1.342284] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.343643] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.343680] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.343713] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1.433115] usb 3-8: New USB device found, idVendor=1770, idProduct=ff00 [ 1.433118] usb 3-8: New USB device strings: Mfr=1, Product=1, SerialNumber=1 [ 1.433119] usb 3-8: Product: MSI EPF USB [ 1.433120] usb 3-8: Manufacturer: MSI EPF USB [ 1.433121] usb 3-8: SerialNumber: MSI EPF USB [ 1.433220] usb 3-8: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.434952] hidraw: raw HID events driver (C) Jiri Kosina [ 1.436596] usbcore: registered new interface driver usbhid [ 1.436598] usbhid: USB HID core driver [ 1.437726] hid-generic 0003:1770:FF00.0001: hiddev0,hidraw0: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:14.0-8/input0 [ 1.573582] PM: Starting manual resume from disk [ 1.573586] PM: Hibernation image partition 8:21 present [ 1.573587] PM: Looking for hibernation image. [ 1.573709] PM: Image not found (code -22) [ 1.573711] PM: Hibernation image not present or could not be loaded. [ 1.598716] usb 3-9: new high-speed USB device number 3 using xhci_hcd [ 1.614710] tsc: Refined TSC clocksource calibration: 2693.762 MHz [ 1.630198] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1.820443] usb 3-9: New USB device found, idVendor=5986, idProduct=014c [ 1.820446] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.820447] usb 3-9: Product: BisonCam, NB Pro [ 1.820448] usb 3-9: Manufacturer: Bison [ 1.990679] usb 3-11: new full-speed USB device number 4 using xhci_hcd [ 2.120288] usb 3-11: string descriptor 0 malformed (err = -61), defaulting to 0x0409 [ 2.122141] usb 3-11: New USB device found, idVendor=0cf3, idProduct=3004 [ 2.122143] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.234593] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.235106] random: nonblocking pool is initialized [ 2.366882] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 2.366885] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.367184] hub 2-1:1.0: USB hub found [ 2.367398] hub 2-1:1.0: 8 ports detected [ 2.614644] Switched to clocksource tsc [ 3.090029] udevd[528]: starting version 175 [ 4.039695] ACPI: AC Adapter [ADP1] (off-line) [ 4.245792] ACPI: Battery Slot [BAT1] (battery present) [ 4.245878] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input2 [ 4.249238] ACPI: Lid Switch [LID0] [ 4.249284] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 4.249322] ACPI: Power Button [PWRB] [ 4.249361] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 4.249391] ACPI: Power Button [PWRF] [ 4.249801] wmi: Mapper loaded [ 4.278732] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.387991] AVX2 version of gcm_enc/dec engaged. [ 4.389481] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 4.510718] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 4.710874] input: MSI WMI hotkeys as /devices/virtual/input/input7 [ 4.715673] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 4.715677] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.728408] alg: No test for crc32 (crc32-pclmul) [ 4.857358] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 4.896447] sound hdaudioC0D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line [ 4.896450] sound hdaudioC0D0: speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.896451] sound hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 4.896452] sound hdaudioC0D0: mono: mono_out=0x0 [ 4.896453] sound hdaudioC0D0: dig-out=0x1e/0x0 [ 4.896454] sound hdaudioC0D0: inputs: [ 4.896456] sound hdaudioC0D0: Mic=0x18 [ 4.896457] sound hdaudioC0D0: Internal Mic=0x12 [ 4.896458] sound hdaudioC0D0: Line=0x1a [ 4.905314] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.905416] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.905519] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.905800] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.011552] iTCO_vendor_support: vendor-support=0 [ 5.101212] [drm] Initialized drm 1.1.0 20060810 [ 5.246533] cfg80211: Calling CRDA to update world regulatory domain [ 5.370601] [drm] Memory usable by graphics device = 2048M [ 5.370603] [drm] Replacing VGA console driver [ 5.371579] Console: switching to colour dummy device 80x25 [ 5.393458] i915 0000:00:02.0: irq 48 for MSI/MSI-X [ 5.393468] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.393469] [drm] Driver supports precise vblank timestamp query. [ 5.393531] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none [ 5.420404] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 5.420429] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 5.420516] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.427619] [drm] VBT doesn't support DRRS [ 5.588806] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762 [ 5.618984] Bluetooth: Core ver 2.19 [ 5.619003] NET: Registered protocol family 31 [ 5.619004] Bluetooth: HCI device and connection manager initialized [ 5.619015] Bluetooth: HCI socket layer initialized [ 5.619016] Bluetooth: L2CAP socket layer initialized [ 5.619028] Bluetooth: SCO socket layer initialized [ 5.635889] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 5.642572] fbcon: inteldrmfb (fb0) is primary device [ 5.655158] usbcore: registered new interface driver btusb [ 5.724432] ath: EEPROM regdomain: 0x6c [ 5.724432] ath: EEPROM indicates we should expect a direct regpair map [ 5.724433] ath: Country alpha2 being used: 00 [ 5.724433] ath: Regpair used: 0x6c [ 5.731700] usb 3-11: firmware: failed to load ar3k/AthrBT_0x11020000.dfu (-2) [ 5.731701] usb 3-11: Direct firmware load failed with error -2 [ 5.731702] usb 3-11: Falling back to user helper [ 5.853952] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.854112] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90005100000, irq=19 [ 6.202019] Bluetooth: Loading patch file failed [ 6.202024] ath3k: probe of 3-11:1.0 failed with error -12 [ 6.202055] usbcore: registered new interface driver ath3k [ 6.296260] cfg80211: World regulatory domain updated: [ 6.296262] cfg80211: DFS Master region: unset [ 6.296262] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.296264] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.296265] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.296266] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6.296266] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 6.296268] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6.296268] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6.296269] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.296270] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6.440579] media: Linux media interface: v0.10 [ 6.464512] Linux video capture interface: v2.00 [ 6.494531] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:014c) [ 6.499381] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input12 [ 6.499470] usbcore: registered new interface driver uvcvideo [ 6.499470] USB Video Class driver (1.1.1) [ 6.712880] Console: switching to colour frame buffer device 240x67 [ 6.718140] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.718142] i915 0000:00:02.0: registered panic notifier [ 6.757089] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 6.760625] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 6.760665] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:00/input/input13 [ 6.789826] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.789887] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14 [ 6.789956] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.824970] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 8.090848] Adding 16543740k swap on /dev/sdb5. Priority:-1 extents:1 across:16543740k FS [ 8.099507] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 8.319426] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 8.526041] loop: module loaded [ 9.308711] RPC: Registered named UNIX socket transport module. [ 9.308713] RPC: Registered udp transport module. [ 9.308714] RPC: Registered tcp transport module. [ 9.308714] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.319814] FS-Cache: Loaded [ 9.330919] FS-Cache: Netfs 'nfs' registered for caching [ 9.393694] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 11.145612] bbswitch: version 0.8 [ 11.145617] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 11.145621] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 11.145629] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95) [ 11.145694] bbswitch: detected an Optimus _DSM function [ 11.145702] pci 0000:01:00.0: enabling device (0006 -> 0007) [ 11.145738] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 11.147245] bbswitch: disabling discrete graphics [ 11.147251] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95) [ 11.226873] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 12.552238] Bluetooth: RFCOMM TTY layer initialized [ 12.552247] Bluetooth: RFCOMM socket layer initialized [ 12.552251] Bluetooth: RFCOMM ver 1.11 [ 12.628749] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.628751] Bluetooth: BNEP filters: protocol multicast [ 12.628758] Bluetooth: BNEP socket layer initialized [ 12.959713] lp: driver loaded but no devices found [ 12.973512] ppdev: user-space parallel port driver [ 14.151042] alx 0000:03:00.0: irq 49 for MSI/MSI-X [ 14.151373] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.166642] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 49.017612] usb 3-1: new full-speed USB device number 5 using xhci_hcd [ 49.367318] usb 3-1: New USB device found, idVendor=0738, idProduct=1705 [ 49.367321] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 49.367322] usb 3-1: Product: Mad Catz R.A.T.5 Mouse [ 49.367324] usb 3-1: Manufacturer: Mad Catz [ 49.370521] input: Mad Catz Mad Catz R.A.T.5 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0738:1705.0002/input/input16 [ 49.370681] hid-generic 0003:0738:1705.0002: input,hidraw1: USB HID v1.11 Mouse [Mad Catz Mad Catz R.A.T.5 Mouse] on usb-0000:00:14.0-1/input0 [ 1566.218782] alx 0000:03:00.0 eth0: NIC Up: 100 Mbps Full [ 1566.219002] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1577.075782] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0). [ 1577.075786] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known. [ 1577.079754] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0). [ 1577.079756] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known. [ 1578.592115] [Firmware Bug]: battery: (dis)charge rate invalid.

et ~/.xsession-errors :

Voilà si quelqu’un sait interpréter ces messages, je sais pas quoi faire :confused:

Merci encore

#5

Le fichier xsession-errors doit être récupéré depuis ton compte utilisateur, non depuis ton compte root.

C’est lui qui contient les erreurs qui se produisent lors du lancement des applications graphiques (c’est à dire pendant que Xorg/Gnome sont lancés).

Pour le reste,

  • ton dmesg ne présente rien d’anormal (après zieutage rapide).
  • ton Xorg.0.log présente une erreur à répétition mais pas de grosse erreur fatale genre “déchargement de module avec code d’erreur ou je ne sais quoi”, ce qui signifie qu’il n’y a sans doute pas de gros pépin avec ton installation de bumblebee. L’erreur que tu as concerne FBDEV, Framebuffer, donc qqch qui n’est pas lié à ta Nvidia.