Carte son et casque audio confli ?

Hello

j’ai un petit problème, j’ai un casque audio celui ci ne marche pas si je laisse la carte son activée dans le bios.
si je coupe la carte son dans le bios sa passe. vu que j’utilise alsa je pense que celui ci ne me permet pas d’accéder a mes 2 périphérique en même temps car l’un a la priorité sur l’autre.

donc il suffirai de pouvoir couper un lien concernant la carte son ou une autre bidouille du même genre pour que alsa mixer puisse passe de l’un a l’autre.

une piste ? je sai pas quoi fournir comme info vu que tout est reconnu ??

Merci d’avance

up ?

ton casque c’est une carte son?
essaye de couper et réactiver le son des différents périphériques avec la lettre ‘m’ dans alsamixer
(et monter le on)

moi j’essayerai pulseaudio mais encore faut t’il reussir a le faire marcher correctement

[quote=“dchost99”]ton casque c’est une carte son?
essaye de couper et réactiver le son des différents périphériques avec la lettre ‘m’ dans alsamixer
(et monter le on)[/quote]
il le considère comme tel il me semble. dificile de voir ou il faut trafiquer. je donne la carte son activée plus le casque usb brancher.

lsusb
Bus 002 Device 011: ID 046d:0a02 Logitech, Inc. Premium Stereo USB Headset 350

(normalement c’est un 250 mai bon …)

00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
# ls /dev
bsg              fd       kmem   loop7               port   ram13  ram9    sda5      sr0     tty13  tty22  tty31  tty40  tty5   tty59  ttyS1            usbdev2.1_ep81  usbdev2.7_ep81  usbdev4.1_ep81  usbdev8.1_ep81  vcs   vcsa1
bus              full     kmsg   MAKEDEV             ppp    ram14  random  sda6      stderr  tty14  tty23  tty32  tty41  tty50  tty6   ttyS2            usbdev2.3_ep00  usbdev2.8_ep00  usbdev5.1_ep00  usbmon0         vcs1  vcsa2
cdrom            hidraw0  log    mem                 psaux  ram15  root    sda7      stdin   tty15  tty24  tty33  tty42  tty51  tty60  ttyS3            usbdev2.3_ep81  usbdev2.8_ep81  usbdev5.1_ep81  usbmon1         vcs2  vcsa3
cdrw             hidraw1  loop0  net                 ptmx   ram2   rtc     sda8      stdout  tty16  tty25  tty34  tty43  tty52  tty61  urandom          usbdev2.4_ep00  usbdev2.8_ep82  usbdev6.1_ep00  usbmon2         vcs3  vcsa4
console          hidraw2  loop1  network_latency     pts    ram3   rtc0    sda9      tty     tty17  tty26  tty35  tty44  tty53  tty62  usb              usbdev2.4_ep81  usbdev2.9_ep00  usbdev6.1_ep81  usbmon3         vcs4  vcsa5
core             hidraw3  loop2  network_throughput  ram0   ram4   scd0    sg0       tty0    tty18  tty27  tty36  tty45  tty54  tty63  usbdev1.1_ep00   usbdev2.5_ep00  usbdev2.9_ep02  usbdev6.3_ep00  usbmon4         vcs5  vcsa6
cpu_dma_latency  hidraw4  loop3  null                ram1   ram5   sda     sg1       tty1    tty19  tty28  tty37  tty46  tty55  tty7   usbdev1.1_ep81   usbdev2.5_ep81  usbdev2.9_ep81  usbdev6.3_ep81  usbmon5         vcs6  vcsa7
disk             hpet     loop4  nvidia0             ram10  ram6   sda1    shm       tty10   tty2   tty29  tty38  tty47  tty56  tty8   usbdev2.11_ep00  usbdev2.6_ep00  usbdev3.1_ep00  usbdev7.1_ep00  usbmon6         vcs7  vcsa8
dvd              initctl  loop5  nvidiactl           ram11  ram7   sda10   snapshot  tty11   tty20  tty3   tty39  tty48  tty57  tty9   usbdev2.11_ep83  usbdev2.6_ep81  usbdev3.1_ep81  usbdev7.1_ep81  usbmon7         vcs8  xconsole
dvdrw            input    loop6  pktcdvd             ram12  ram8   sda2    snd       tty12   tty21  tty30  tty4   tty49  tty58  ttyS0  usbdev2.1_ep00   usbdev2.7_ep00  usbdev4.1_ep00  usbdev8.1_ep00  usbmon8         vcsa  zero
dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26.cust.16.min.gcc4 (2.6.26) (root@wboost) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Sep 4 19:32:55 CEST 2009
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[    0.000000]  BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cbfb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cbfb0000 - 00000000cbfc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cbfc0000 - 00000000cbff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cbff0000 - 00000000cc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] 2367MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at [c00ff780] 000ff780
[    0.000000] Entering add_active_range(0, 0, 835504) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   835504
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   835504
[    0.000000] On node 0 totalpages: 835504
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4736 pages used for memmap
[    0.000000]   HighMem zone: 601392 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000FA150, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CBFB0000, 0038 (r1 090308 RSDT1344 20080903 MSFT       97)
[    0.000000] ACPI: FACP CBFB0200, 0084 (r1 A M I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CBFB0440, 59DA (r1  AS112 AS112172      172 INTL 20051117)
[    0.000000] ACPI: FACS CBFC0000, 0040
[    0.000000] ACPI: APIC CBFB0390, 006C (r1 090308 APIC1344 20080903 MSFT       97)
[    0.000000] ACPI: MCFG CBFB0400, 003C (r1 090308 OEMMCFG  20080903 MSFT       97)
[    0.000000] ACPI: OEMB CBFC0040, 0072 (r1 090308 OEMB1344 20080903 MSFT       97)
[    0.000000] ACPI: SSDT CBFC05C0, 0A7C (r1 DpgPmm    CpuPm       12 INTL 20051117)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at d0000000 (gap: cc000000:32e00000)
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PERCPU: Allocating 37864 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 828976
[    0.000000] Kernel command line: root=UUID=95ff9af4-d807-49be-ae63-c282aef20560 ro quiet
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2999.755 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000999] Memory: 3304844k/3342016k available (2525k kernel code, 35988k reserved, 1157k data, 264k init, 2424512k highmem)
[    0.000999] virtual kernel memory layout:
[    0.000999]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000999]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.000999]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.000999]       .init : 0xc04a2000 - 0xc04e4000   ( 264 kB)
[    0.000999]       .data : 0xc03774f2 - 0xc04989f4   (1157 kB)
[    0.000999]       .text : 0xc0100000 - 0xc03774f2   (2525 kB)
[    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[    0.061007] Calibrating delay using timer specific routine.. 6001.84 BogoMIPS (lpj=3000923)
[    0.061030] Security Framework initialized
[    0.061033] SELinux:  Disabled at boot.
[    0.061036] Capability LSM initialized
[    0.061044] Mount-cache hash table entries: 512
[    0.061137] Initializing cgroup subsys ns
[    0.061139] Initializing cgroup subsys cpuacct
[    0.061141] Initializing cgroup subsys devices
[    0.061153] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.061155] CPU: L2 cache: 6144K
[    0.061156] CPU: Physical Processor ID: 0
[    0.061157] CPU: Processor Core ID: 0
[    0.061159] Intel machine check architecture supported.
[    0.061161] Intel machine check reporting enabled on CPU#0.
[    0.061162] using mwait in idle threads.
[    0.061168] Checking 'hlt' instruction... OK.
[    0.065896] ACPI: Core revision 20080321
[    0.073988] ENABLING IO-APIC IRQs
[    0.073988] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.083983] CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
[    0.083987] Booting processor 1/1 ip 6000
[    0.095985] Initializing CPU#1
[    0.095985] Calibrating delay using timer specific routine.. 5998.20 BogoMIPS (lpj=2999104)
[    0.095985] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.095985] CPU: L2 cache: 6144K
[    0.095985] CPU: Physical Processor ID: 0
[    0.095985] CPU: Processor Core ID: 1
[    0.095985] Intel machine check architecture supported.
[    0.095985] Intel machine check reporting enabled on CPU#1.
[    0.155976] CPU1: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
[    0.155976] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.156975] Brought up 2 CPUs
[    0.156975] Total of 2 processors activated (12000.05 BogoMIPS).
[    0.156975] CPU0 attaching sched-domain:
[    0.156975]  domain 0: span 0-1
[    0.156975]   groups: 0 1
[    0.156975] CPU1 attaching sched-domain:
[    0.156975]  domain 0: span 0-1
[    0.156975]   groups: 1 0
[    0.156976] net_namespace: 652 bytes
[    0.156976] Booting paravirtualized kernel on bare hardware
[    0.157975] NET: Registered protocol family 16
[    0.157975] No dock devices found.
[    0.157975] ACPI: bus type pci registered
[    0.157975] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.157975] PCI: Not using MMCONFIG.
[    0.157975] PCI: Using configuration type 1 for base access
[    0.157975] Setting up standard PCI resources
[    0.158975] ACPI: EC: Look up EC in DSDT
[    0.164930] ACPI: Interpreter enabled
[    0.164932] ACPI: (supports S0 S1 S3 S4 S5)
[    0.164942] ACPI: Using IOAPIC for interrupt routing
[    0.164974] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.167594] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.167596] PCI: Using MMCONFIG for extended config space
[    0.172973] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.173973] PCI: Transparent bridge - 0000:00:1e.0
[    0.173973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.174150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.174224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.174351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.174423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.174494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.174565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.174639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.176973] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.177062] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.177146] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.177232] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.177317] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.177404] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.177490] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.177577] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.177972] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 04, should be 03 [20080321]
[    0.177972] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.177972] pnp: PnP ACPI init
[    0.177972] ACPI: bus type pnp registered
[    0.180972] pnp: PnP ACPI: found 14 devices
[    0.180972] ACPI: ACPI bus type pnp unregistered
[    0.180972] SCSI subsystem initialized
[    0.180972] libata version 3.00 loaded.
[    0.180972] usbcore: registered new interface driver usbfs
[    0.180972] usbcore: registered new interface driver hub
[    0.180972] usbcore: registered new device driver usb
[    0.180972] PCI: Using ACPI for IRQ routing
[    0.182943] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[    0.182972] ACPI: RTC can wake from S4
[    0.183946] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.183948] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[    0.183952] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.183954] system 00:06: ioport range 0x800-0x87f has been reserved
[    0.183955] system 00:06: ioport range 0x500-0x57f has been reserved
[    0.183958] system 00:06: ioport range 0x900-0x90f has been reserved
[    0.183960] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.183961] system 00:06: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.183963] system 00:06: iomem range 0xfed40000-0xfed8ffff has been reserved
[    0.183967] system 00:08: iomem range 0xffc00000-0xfff7ffff could not be reserved
[    0.183970] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.183972] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.183975] system 00:0b: ioport range 0x280-0x28f has been reserved
[    0.183977] system 00:0b: ioport range 0x290-0x29f has been reserved
[    0.183981] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[    0.183984] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.183986] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[    0.183987] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.183989] system 00:0d: iomem range 0x100000-0xcbffffff could not be reserved
[    0.183991] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
[    0.214706] PCI: Bridge: 0000:00:01.0
[    0.214706]   IO window: e000-efff
[    0.214706]   MEM window: 0xfa000000-0xfebfffff
[    0.214706]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[    0.214706] PCI: Bridge: 0000:00:1c.0
[    0.214706]   IO window: d000-dfff
[    0.214706]   MEM window: 0xf9800000-0xf9ffffff
[    0.214706]   PREFETCH window: 0x00000000ce000000-0x00000000cfffffff
[    0.214706] PCI: Bridge: 0000:00:1c.1
[    0.214706]   IO window: disabled.
[    0.214706]   MEM window: disabled.
[    0.214706]   PREFETCH window: 0x00000000cdf00000-0x00000000cdffffff
[    0.214706] PCI: Bridge: 0000:00:1c.2
[    0.214706]   IO window: disabled.
[    0.214706]   MEM window: disabled.
[    0.214706]   PREFETCH window: 0x00000000cde00000-0x00000000cdefffff
[    0.214706] PCI: Bridge: 0000:00:1c.3
[    0.214706]   IO window: c000-cfff
[    0.214706]   MEM window: 0xf9700000-0xf97fffff
[    0.214706]   PREFETCH window: disabled.
[    0.214706] PCI: Bridge: 0000:00:1c.5
[    0.214706]   IO window: b000-bfff
[    0.214706]   MEM window: 0xf9600000-0xf96fffff
[    0.214706]   PREFETCH window: 0x00000000cdd00000-0x00000000cddfffff
[    0.214706] PCI: Bridge: 0000:00:1e.0
[    0.214706]   IO window: disabled.
[    0.214706]   MEM window: disabled.
[    0.214706]   PREFETCH window: disabled.
[    0.214706] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.214706] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.214706] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.214706] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.214706] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[    0.214706] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.214706] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.214706] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.214706] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[    0.214706] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.214706] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[    0.214706] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[    0.214706] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.214706] NET: Registered protocol family 2
[    0.217257] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.217382] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.217618] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.217705] TCP: Hash tables configured (established 131072 bind 65536)
[    0.217705] TCP reno registered
[    0.218234] NET: Registered protocol family 1
[    0.218293] checking if image is initramfs... it is
[    0.417230] Freeing initrd memory: 4398k freed
[    0.417734] audit: initializing netlink socket (disabled)
[    0.417749] type=2000 audit(1252272648.415:1): initialized
[    0.418661] highmem bounce pool size: 64 pages
[    0.418661] Total HugeTLB memory allocated, 0
[    0.418686] msgmni has been set to 1729
[    0.418686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.418686] io scheduler noop registered
[    0.418686] io scheduler anticipatory registered (default)
[    0.418686] io scheduler deadline registered
[    0.418686] io scheduler cfq registered
[    0.418686] pci 0000:08:00.0: Boot video device
[    0.418686] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.418686] assign_interrupt_mode Found MSI capability
[    0.418686] Allocate Port Service[0000:00:01.0:pcie00]
[    0.418686] Allocate Port Service[0000:00:01.0:pcie03]
[    0.418686] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.418686] assign_interrupt_mode Found MSI capability
[    0.418686] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.418686] Allocate Port Service[0000:00:1c.0:pcie02]
[    0.418686] Allocate Port Service[0000:00:1c.0:pcie03]
[    0.418686] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.418686] assign_interrupt_mode Found MSI capability
[    0.418686] Allocate Port Service[0000:00:1c.1:pcie00]
[    0.418686] Allocate Port Service[0000:00:1c.1:pcie02]
[    0.418686] Allocate Port Service[0000:00:1c.1:pcie03]
[    0.418686] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.418686] assign_interrupt_mode Found MSI capability
[    0.418686] Allocate Port Service[0000:00:1c.2:pcie00]
[    0.419661] Allocate Port Service[0000:00:1c.2:pcie02]
[    0.419661] Allocate Port Service[0000:00:1c.2:pcie03]
[    0.419661] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.419661] assign_interrupt_mode Found MSI capability
[    0.419661] Allocate Port Service[0000:00:1c.3:pcie00]
[    0.419661] Allocate Port Service[0000:00:1c.3:pcie02]
[    0.419661] Allocate Port Service[0000:00:1c.3:pcie03]
[    0.419661] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[    0.419661] assign_interrupt_mode Found MSI capability
[    0.419661] Allocate Port Service[0000:00:1c.5:pcie00]
[    0.419669] Allocate Port Service[0000:00:1c.5:pcie02]
[    0.419669] Allocate Port Service[0000:00:1c.5:pcie03]
[    0.420668] Linux agpgart interface v0.103
[    0.420668] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    0.420668] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.420733] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.421660] brd: module loaded
[    0.421660] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[    0.421660] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.421660] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    0.421677] eth0: RTL8168c/8111c at 0xf8826000, 00:19:66:90:7e:50, XID 3c4000c0 IRQ 217
[    0.423983] Uniform Multi-Platform E-IDE driver
[    0.423983] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    0.423983] JMB: IDE controller (0x197b:0x2368 rev 0x00) at  PCI slot 0000:03:00.0
[    0.423983] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[    0.423983] JMB: 100% native mode on irq 19
[    0.423983]     ide0: BM-DMA at 0xc400-0xc407
[    0.423983]     ide1: BM-DMA at 0xc408-0xc40f
[    0.423983] Probing IDE interface ide0...
[    0.715101] Switched to NOHz mode on CPU #1
[    0.715743] Switched to NOHz mode on CPU #0
[    0.942509] Probing IDE interface ide1...
[    1.461509] ide0 at 0xcc00-0xcc07,0xc882 on irq 19
[    1.461509] ide1 at 0xc800-0xc807,0xc482 on irq 19
[    1.461509] ata_piix 0000:00:1f.2: version 2.12
[    1.461509] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[    1.461509] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.461509] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    1.461509] scsi0 : ata_piix
[    1.461509] scsi1 : ata_piix
[    1.656625] ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[    1.656629] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[    2.112765] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.125765] ata1.01: ATAPI: ASUS    DRW-1814BLT, 1.14, max UDMA/66
[    2.131649] ata1.01: configured for UDMA/66
[    2.589481] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.608299] ata2.00: ATA-8: WDC WD3000HLFS-01G6U0, 04.04V01, max UDMA/133
[    2.608299] ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.631394] ata2.00: configured for UDMA/133
[    2.631844] scsi 0:0:1:0: CD-ROM            ASUS     DRW-1814BLT      1.14 PQ: 0 ANSI: 5
[    2.632003] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
[    2.632138] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[    2.632141] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    2.632164] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[    2.632199] scsi2 : ata_piix
[    2.632265] scsi3 : ata_piix
[    2.633008] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[    2.633010] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[    2.948503] ata3: SATA link down (SStatus 0 SControl 300)
[    3.263503] ata4: SATA link down (SStatus 0 SControl 300)
[    3.301790] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    3.301790] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    3.301790] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.301790] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.306161] ehci_hcd 0000:00:1a.7: debug port 1
[    3.306165] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    3.306171] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf95ff400
[    3.315540] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.316537] usb usb1: configuration #1 chosen from 1 choice
[    3.316537] hub 1-0:1.0: USB hub found
[    3.316537] hub 1-0:1.0: 6 ports detected
[    3.417537] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.417537] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.417537] usb usb1: Product: EHCI Host Controller
[    3.417537] usb usb1: Manufacturer: Linux 2.6.26.cust.16.min.gcc4 ehci_hcd
[    3.417537] usb usb1: SerialNumber: 0000:00:1a.7
[    3.417537] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    3.417537] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.417537] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.417537] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.422442] ehci_hcd 0000:00:1d.7: debug port 1
[    3.422446] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.422451] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf95ff800
[    3.430587] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.431555] usb usb2: configuration #1 chosen from 1 choice
[    3.431555] hub 2-0:1.0: USB hub found
[    3.431555] hub 2-0:1.0: 6 ports detected
[    3.532556] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.532556] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.532556] usb usb2: Product: EHCI Host Controller
[    3.532556] usb usb2: Manufacturer: Linux 2.6.26.cust.16.min.gcc4 ehci_hcd
[    3.532556] usb usb2: SerialNumber: 0000:00:1d.7
[    3.532556] PNP: No PS/2 controller found. Probing ports directly.
[    3.553497] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.553500] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.553708] mice: PS/2 mouse device common for all mice
[    3.553708] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.553708] rtc0: alarms up to one month, y3k
[    3.553708] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[    3.553731] w83627ehf: Found W83627DHG chip at 0x290
[    3.574562] cpuidle: using governor ladder
[    3.574562] cpuidle: using governor menu
[    3.574562] No iBFT detected.
[    3.574562] Advanced Linux Sound Architecture Driver Version 1.0.16.
[    3.574562] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[    3.574562] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    3.590409] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[    3.920562] usb 2-4: new high speed USB device using ehci_hcd and address 3
[    4.035059] usb 2-4: configuration #1 chosen from 1 choice
[    4.035059] hub 2-4:1.0: USB hub found
[    4.035059] hub 2-4:1.0: 4 ports detected
[    4.138564] usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
[    4.138564] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.138564] usb 2-4: Product: USB2.0 Hub
[    4.344563] usb 2-5: new high speed USB device using ehci_hcd and address 4
[    4.460064] usb 2-5: configuration #1 chosen from 1 choice
[    4.460064] hub 2-5:1.0: USB hub found
[    4.460064] hub 2-5:1.0: 4 ports detected
[    4.563570] usb 2-5: New USB device found, idVendor=05e3, idProduct=0608
[    4.563570] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.563570] usb 2-5: Product: USB2.0 Hub
[    4.745091] usb 2-4.1: new high speed USB device using ehci_hcd and address 5
[    4.830692] usb 2-4.1: configuration #1 chosen from 1 choice
[    4.832096] hub 2-4.1:1.0: USB hub found
[    4.830692] hub 2-4.1:1.0: 4 ports detected
[    4.934837] usb 2-4.1: New USB device found, idVendor=05e3, idProduct=0608
[    4.934837] usb 2-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.934837] usb 2-4.1: Product: USB2.0 Hub
[    5.115302] usb 2-4.1.1: new full speed USB device using ehci_hcd and address 6
[    5.204468] usb 2-4.1.1: configuration #1 chosen from 1 choice
[    5.205998] hub 2-4.1.1:1.0: USB hub found
[    5.204468] hub 2-4.1.1:1.0: 4 ports detected
[    5.308488] usb 2-4.1.1: New USB device found, idVendor=046d, idProduct=c223
[    5.308488] usb 2-4.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    5.308488] usb 2-4.1.1: Product: G15 Keyboard Hub
[    5.475488] usb 2-4.1.2: new low speed USB device using ehci_hcd and address 7
[    5.558120] usb 2-4.1.2: configuration #1 chosen from 1 choice
[    5.558120] usb 2-4.1.2: New USB device found, idVendor=046d, idProduct=c051
[    5.558120] usb 2-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.558120] usb 2-4.1.2: Product: USB-PS/2 Optical Mouse
[    5.558120] usb 2-4.1.2: Manufacturer: Logitech
[    5.739119] usb 2-4.1.1.1: new low speed USB device using ehci_hcd and address 8
[    5.828120] usb 2-4.1.1.1: configuration #1 chosen from 1 choice
[    5.829931] usb 2-4.1.1.1: New USB device found, idVendor=046d, idProduct=c226
[    5.829931] usb 2-4.1.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    5.829931] usb 2-4.1.1.1: Product: G15 Gaming Keyboard
[    6.002844] usb 2-4.1.1.4: new full speed USB device using ehci_hcd and address 9
[    6.092078] usb 2-4.1.1.4: configuration #1 chosen from 1 choice
[    6.093236] usb 2-4.1.1.4: New USB device found, idVendor=046d, idProduct=c227
[    6.093238] usb 2-4.1.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    6.093240] usb 2-4.1.1.4: Product: G15 GamePanel LCD
[    6.109860] usbcore: registered new interface driver snd-usb-audio
[    6.109860] ALSA device list:
[    6.109860]   #0: HDA Intel at 0xf95f8000 irq 22
[    6.110120] TCP cubic registered
[    6.110142] NET: Registered protocol family 10
[    6.110370] lo: Disabled Privacy Extensions
[    6.110646] NET: Registered protocol family 17
[    6.110649] Using IPI No-Shortcut mode
[    6.111079] registered taskstats version 1
[    6.111079] rtc_cmos 00:03: setting system clock to 2009-09-06 21:30:54 UTC (1252272654)
[    6.111079] Freeing unused kernel memory: 264k freed
[    6.150171] ACPI: SSDT CBFC00C0, 0277 (r1 DpgPmm  P001Ist       11 INTL 20051117)
[    6.150393] ACPI: ACPI0007:00 is registered as cooling_device0
[    6.150652] ACPI: SSDT CBFC0340, 0277 (r1 DpgPmm  P002Ist       12 INTL 20051117)
[    6.150849] ACPI: ACPI0007:01 is registered as cooling_device1
[    6.196968] Driver 'sd' needs updating - please use bus_type methods
[    6.197032] sd 1:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
[    6.197040] sd 1:0:0:0: [sda] Write Protect is off
[    6.197041] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.197051] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.197080] sd 1:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
[    6.197090] sd 1:0:0:0: [sda] Write Protect is off
[    6.197092] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.197103] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.197105]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    6.200069] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.200071] Uniform CD-ROM driver Revision: 3.20
[    6.200109] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    6.202153]  sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    6.240768] sd 1:0:0:0: [sda] Attached SCSI disk
[    6.244159] sr 0:0:1:0: Attached scsi generic sg0 type 5
[    6.244172] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.313908] USB Universal Host Controller Interface driver v3.0
[    6.313937] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    6.313943] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    6.313946] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    6.313979] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    6.314003] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008400
[    6.314052] usb usb3: configuration #1 chosen from 1 choice
[    6.314070] hub 3-0:1.0: USB hub found
[    6.314073] hub 3-0:1.0: 2 ports detected
[    6.396090] usbcore: registered new interface driver hiddev
[    6.400490] input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
[    6.401152] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-4.1.2
[    6.403797] input: G15 Gaming Keyboard as /class/input/input1
[    6.405149] input,hidraw1: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.7-4.1.1.1
[    6.410127] input: G15 Gaming Keyboard as /class/input/input2
[    6.410127] input,hiddev96,hidraw2: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.7-4.1.1.1
[    6.413085] input: G15 GamePanel LCD as /class/input/input3
[    6.413271] input,hiddev97,hidraw3: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.7-4.1.1.4
[    6.413280] usbcore: registered new interface driver usbhid
[    6.413282] usbhid: v2.6:USB HID core driver
[    6.417669] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    6.417671] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.417672] usb usb3: Product: UHCI Host Controller
[    6.417673] usb usb3: Manufacturer: Linux 2.6.26.cust.16.min.gcc4 uhci_hcd
[    6.417675] usb usb3: SerialNumber: 0000:00:1a.0
[    6.417698] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[    6.417704] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    6.417707] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    6.417733] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    6.417756] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008480
[    6.417801] usb usb4: configuration #1 chosen from 1 choice
[    6.417818] hub 4-0:1.0: USB hub found
[    6.417821] hub 4-0:1.0: 2 ports detected
[    6.519404] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    6.519406] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.519408] usb usb4: Product: UHCI Host Controller
[    6.519409] usb usb4: Manufacturer: Linux 2.6.26.cust.16.min.gcc4 uhci_hcd
[    6.519411] usb usb4: SerialNumber: 0000:00:1a.1
[    6.519430] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
[    6.519437] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[    6.519439] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    6.519466] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    6.519485] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008800
[    6.519536] usb usb5: configuration #1 chosen from 1 choice
[    6.519552] hub 5-0:1.0: USB hub found
[    6.519556] hub 5-0:1.0: 2 ports detected
[    6.663943] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    6.663944] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.663946] usb usb5: Product: UHCI Host Controller
[    6.663947] usb usb5: Manufacturer: Linux 2.6.26.cust.16.min.gcc4 uhci_hcd
[    6.663948] usb usb5: SerialNumber: 0000:00:1a.2
[    6.663966] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    6.663971] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    6.663973] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    6.663995] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    6.664013] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008880
[    6.664054] usb usb6: configuration #1 chosen from 1 choice
[    6.664070] hub 6-0:1.0: USB hub found
[    6.664073] hub 6-0:1.0: 2 ports detected
[    6.765891] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    6.765891] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.765891] usb usb6: Product: UHCI Host Controller
[    6.765891] usb usb6: Manufacturer: Linux 2.6.26.cust.16.min.gcc4 uhci_hcd
[    6.765891] usb usb6: SerialNumber: 0000:00:1d.0
[    6.765891] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[    6.765891] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    6.765891] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    6.765891] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    6.765891] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008c00
[    6.765891] usb usb7: configuration #1 chosen from 1 choice
[    6.765891] hub 7-0:1.0: USB hub found
[    6.765891] hub 7-0:1.0: 2 ports detected
[    6.866892] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    6.866892] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.866892] usb usb7: Product: UHCI Host Controller
[    6.866892] usb usb7: Manufacturer: Linux 2.6.26.cust.16.min.gcc4 uhci_hcd
[    6.866892] usb usb7: SerialNumber: 0000:00:1d.1
[    6.866892] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    6.866892] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    6.866892] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    6.866892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    6.866892] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009000
[    6.866892] usb usb8: configuration #1 chosen from 1 choice
[    6.866892] hub 8-0:1.0: USB hub found
[    6.866892] hub 8-0:1.0: 2 ports detected
[    6.920875] hub 6-0:1.0: unable to enumerate USB device on port 2
[    6.967892] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    6.967892] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.967892] usb usb8: Product: UHCI Host Controller
[    6.967892] usb usb8: Manufacturer: Linux 2.6.26.cust.16.min.gcc4 uhci_hcd
[    6.967892] usb usb8: SerialNumber: 0000:00:1d.2
[    7.604749] PM: Starting manual resume from disk
[    7.616117] usb 6-2: new low speed USB device using uhci_hcd and address 3
[    7.628033] kjournald starting.  Commit interval 5 seconds
[    7.633037] EXT3-fs: mounted filesystem with ordered data mode.
[    7.791475] usb 6-2: configuration #1 chosen from 1 choice
[    7.873199] hiddev98hidraw4: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.0-2
[    7.879232] usb 6-2: New USB device found, idVendor=0665, idProduct=5161
[    7.879232] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.879232] usb 6-2: Product: USB to Serial
[    7.879232] usb 6-2: Manufacturer: Cypress Semiconductor
[    8.520839] udevd version 125 started
[    8.951148] input: Power Button (FF) as /class/input/input4
[    8.963873] ACPI: Power Button (FF) [PWRF]
[    8.963927] input: Power Button (CM) as /class/input/input5
[    8.974907] ACPI: Power Button (CM) [PWRB]
[   10.099246] Adding 939760k swap on /dev/sda9.  Priority:-1 extents:1 across:939760k
[   10.437666] EXT3 FS on sda10, internal journal
[   10.894956] loop: module loaded
[   12.350980] kjournald starting.  Commit interval 5 seconds
[   12.350980] EXT3 FS on sda1, internal journal
[   12.350980] EXT3-fs: mounted filesystem with ordered data mode.
[   12.361691] kjournald starting.  Commit interval 5 seconds
[   12.362263] EXT3 FS on sda7, internal journal
[   12.362265] EXT3-fs: mounted filesystem with ordered data mode.
[   12.377325] kjournald starting.  Commit interval 5 seconds
[   12.377325] EXT3 FS on sda5, internal journal
[   12.377325] EXT3-fs: mounted filesystem with ordered data mode.
[   12.377325] kjournald starting.  Commit interval 5 seconds
[   12.379325] EXT3 FS on sda6, internal journal
[   12.379325] EXT3-fs: mounted filesystem with ordered data mode.
[   12.377325] kjournald starting.  Commit interval 5 seconds
[   12.377325] EXT3 FS on sda8, internal journal
[   12.377325] EXT3-fs: mounted filesystem with ordered data mode.
[   13.095414] w83627ehf w83627ehf.656: Increasing fan2 clock divider from 8 to 16
[   13.095452] w83627ehf w83627ehf.656: Increasing fan3 clock divider from 8 to 16
[   13.095505] w83627ehf w83627ehf.656: Increasing fan5 clock divider from 8 to 16
[   14.021474] r8169: eth0: link up
[   14.021474] r8169: eth0: link up
[   20.082099] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.960001] nvidia: module license 'NVIDIA' taints kernel.
[   22.212674] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   22.212792] PCI: Setting latency timer of device 0000:08:00.0 to 64
[   22.212997] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.09  Wed Jun  4 23:43:17 PDT 2008
[   24.778212] eth0: no IPv6 routers present
[   25.945021] w83627ehf w83627ehf.656: Increasing fan2 clock divider from 16 to 32
[   25.945063] w83627ehf w83627ehf.656: Increasing fan3 clock divider from 16 to 32
[   25.945119] w83627ehf w83627ehf.656: Increasing fan5 clock divider from 16 to 32
[   36.810149] w83627ehf w83627ehf.656: Increasing fan2 clock divider from 32 to 64
[   36.810149] w83627ehf w83627ehf.656: Increasing fan3 clock divider from 32 to 64
[   36.810149] w83627ehf w83627ehf.656: Increasing fan5 clock divider from 32 to 64
[   46.886728] w83627ehf w83627ehf.656: Increasing fan2 clock divider from 64 to 128
[   46.886774] w83627ehf w83627ehf.656: Increasing fan3 clock divider from 64 to 128
[   46.886828] w83627ehf w83627ehf.656: Increasing fan5 clock divider from 64 to 128
[   50.833448] HTB: quantum of class 10001 is small. Consider r2q change.
[   50.834634] HTB: quantum of class 10003 is big. Consider r2q change.
[   50.835238] HTB: quantum of class 10004 is big. Consider r2q change.
[   50.835792] HTB: quantum of class 10005 is small. Consider r2q change.
[   50.836345] HTB: quantum of class 10020 is small. Consider r2q change.
[   50.839725] HTB: quantum of class 10026 is big. Consider r2q change.
[   50.840291] HTB: quantum of class 10027 is big. Consider r2q change.
[   50.840883] HTB: quantum of class 10028 is small. Consider r2q change.
[27803.290740] usb 2-4.1.4: new full speed USB device using ehci_hcd and address 11
[27803.379967] usb 2-4.1.4: configuration #1 chosen from 1 choice
[27803.415518] input: Logitech Logitech USB Headset as /class/input/input6
[27803.425261] input,hidraw3: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.7-4.1.4
[27803.425381] usb 2-4.1.4: New USB device found, idVendor=046d, idProduct=0a02
[27803.425383] usb 2-4.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[27803.425385] usb 2-4.1.4: Product: Logitech USB Headset
[27803.425386] usb 2-4.1.4: Manufacturer: Logitech

voila ce que j’ai si je lance un:alsamixergui
http://www.panthere-noire.com/fichier/screen/alsa.png
normalement je devrai pouvoir choisi un 2eme périphérique (une autre carte son?) mai la j’ai aucun moyen ??