Bonsoir,
J’ai fait l’acquisition d’un nouveau PC et il se trouve que je n’arrive pas à utiliser le chipset Wifi.
Sur le wiki officiel de Debian, il est dit que le driver “ath9k” est complètement libre et open-source, donc aucunement besoin d’un firmware : http://wiki.debian.org/ath9k
Voici la sortie lspci concernant mon chipset wifi :
Lorsque je fais un iwconfig, mon interface wifi est disponible :
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=off
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Le problème qu’il se pose c’est que je n’arrive pas à le voir dans “network-manager-gnome” et lorsque je tente de lancer le wifi manuellement, j’ai droit à ceci :
[code]root@Laptop64:/home/berillions# ifup wlan0
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
RTNETLINK answers: Operation not possible due to RF-kill
Listening on LPF/wlan0/e0:b9:a5:66:bb:db
Sending on LPF/wlan0/e0:b9:a5:66:bb:db
Sending on Socket/fallback
receive_packet failed on wlan0: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
send_packet: Network is down
[/code]
Une petite idée, car je suis complètement perdu…
EDIT : En faite, le module est bien lancé mais le problème c’est qu’il ne trouve aucun réseau… Et ca fonctionne très bien sous Windows…
EDIT 2 :
Lorsque je fais un iwscan list, voilà ce qu’il me retourne :
[code]iwlist scan
lo Interface doesn’t support scanning.
eth0 Interface doesn’t support scanning.
wlan0 Interface doesn’t support scanning : Network is down
[/code]
Et lorsque je fais un ifconfig wlan0 up :
root@Laptop64:/home/berillions# ifconfig wlan0 up
SIOCSIFFLAGS: Operation not possible due to RF-kill