Comment installer compiz?

Support Debian
#1

salut j’ai fraîchement installé debian lenny sur un portable esprimo et j’ai beau cherché sur le net, je ne vois pas comment faire …je renvoie quelques informations…merci pour vos futures réponses…

$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

$ glxinfo | grep "direct rendering"
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)

$ LIBGL_DEBUG=verbose glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.4)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_draw_buffers, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square,
GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite,
GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat

0x22 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x24 16 tc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x25 16 tc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x3e 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon

#2

Salut, :smiley:

Il nous faudrait aussi le contenu de /etc/X11/xorg.conf

pour commencer vérifie que les paquets mesa-utils, libgl1-mesa-glx et libgl1-mesa-dri sont installé

si ce n’est déjà fait :

et dis nous ce qui se passe…

edit : les drivers intel sont en pleine réécriture depuis 1 an alors il y a parfois des merdes…

#3

salut
merci ta réponse

j’ai fait les install demandées…

et j’ai lancé compiz:

jakol:/home/jakol/Desktop# compiz
Fatal: Compiz can’t be ran using VESA or VGA divers.

… :confused:

#4

pour xorg.conf…A l’initial c’était vide…

02/08/2009 : Ajout de cette section pour avoir le clavier azerty

#en début de session

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
Option “XkbOptions” "lv3:ralt_switch"
EndSection

#5

Il faut avant tout avoir yes à la commande # glxinfo | grep “direct rendering”

Normalement xorg te devine ce qu’il faut mais à tout hasard essaye de rajaouter ceci à la fin

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option “Composite” "Enable"
EndSection

#6

salut
j’ai rajouté le code dans xorg.conf et j’ai lancé compiz…

Fatal: Compiz can’t be ran using VESA or VGA divers.

…

#7

c’est visiblement un problème de drivers, et avec les chipset intel c’est pas génial compiz…

#8

ca ,ca veut dire que compiz ne fonctionne pas avec les pilotes graphiques VESA et VGA,ceux que tu as apparemment

fais-toi une petite config hardware,moyennant,quelques sous…non?si tu as une petite config,il faudra te contenter du systeme de base de debian,sans les effets,etc…

de toute facon ,je sais pas quel age tu as ,mais si t’es un jeune,il faut soit:forcer les choses et etre un vrai genie,soit:voir pour mettre a jour le hardware.

pour savoir ta config dans les details,tu fais dans un terminal:

pour te donner envie peut-etre:

youtube.com/watch?v=lawkc3jH3ws

et cette video date de 2006…pour moi,c’est la mieux,tu peux aussi jeter un oeil sur ma galerie personnel:
linuxshot.org/fr/gallery/burty00/

tout les screenshots sont fait avec debian 5.0…que j’ai depuis … trois jours…euh…nuit :smt005

et je doute que l’option “composite” puisse fonctionner :open_mouth:

#9

Tu peux t’arrêter la, tant que c’est comme ça compiz ne fonctionnera pas, donc cherche comment activé la 3D avec ta carte intel, tu devras sûrement rajouter une section [DEVICE] avec le driver “intel” pour commencer.

#10

les americains doivent rigoler…la haine que j’ai :smt075

#11

[quote=“debianhadic”][quote=“jakol”]
$ glxinfo | grep "direct rendering"
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
[/quote]
Tu peux t’arrêter la, tant que c’est comme ça compiz ne fonctionnera pas, donc cherche comment activé la 3D avec ta carte intel, tu devras sûrement rajouter une section [DEVICE] avec le driver “intel” pour commencer.[/quote]

Version: V1.20     
Release Date: 04/03/2009
Address: 0xE5FB0
Runtime Size: 106576 bytes
ROM Size: 1024 kB
Characteristics:
	ISA is supported
	PCI is supported
	PC Card (PCMCIA) is supported
	PNP is supported
	BIOS is upgradeable
	BIOS shadowing is allowed
	ESCD support is available
	Boot from CD is supported
	ACPI is supported
	USB legacy is supported
	AGP is supported
	BIOS boot specification is supported
	Targeted content distribution is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: FUJITSU SIEMENS
Product Name: ESPRIMO Mobile V6505
Version: 20
Serial Number: YKKD070021
UUID: 5F6FAD60-8992-11DD-91F9-001F1603BFB4
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified

Handle 0x0002, DMI type 2, 17 bytes
Base Board Information
Manufacturer: FUJITSU SIEMENS
Product Name: D46
Version: 1B
Serial Number: 914K0Z1103G838019A3KS0B
Asset Tag: Tag 12345
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Not Applicable
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 1
0x0000

Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: FUJITSU SIEMENS
Type: Notebook
Lock: Not Present
Version: A2040
Serial Number: YKKD070021
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Height: Unspecified
Number Of Power Cords: Unspecified
Contained Elements: 0

Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family:
Manufacturer: Intel
ID: 7A 06 01 00 FF FB EB BF
Version: CPU Version
Voltage: 3.3 V
External Clock: 200 MHz
Max Speed: 4096 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 4096 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative

Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J19
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: COM 1
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Mouse Port

Handle 0x000A, DMI type 9, 13 bytes
System Slot Information
Designation: PEG Slot J6B2
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 6
Characteristics:
5.0 V is provided
3.3 V is provided

Handle 0x000B, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J6B1
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 7
Characteristics:
5.0 V is provided
3.3 V is provided

Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J6D1
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 8
Characteristics:
5.0 V is provided
3.3 V is provided

Handle 0x000D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J8B3
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 9
Characteristics:
5.0 V is provided
3.3 V is provided

Handle 0x000E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J8D1
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 10
Characteristics:
5.0 V is provided
3.3 V is provided

Handle 0x000F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J7B1
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 11
Characteristics:
5.0 V is provided
3.3 V is provided

Handle 0x0010, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot 6
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 10
Characteristics:
5.0 V is provided
3.3 V is provided

Handle 0x0011, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: HD-Audio

Handle 0x0012, DMI type 11, 5 bytes
OEM Strings
String 1: This is the Intel Cantiga
String 2: Chipset CRB Platform

Handle 0x0013, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.

Handle 0x0014, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000001
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event

Handle 0x0015, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2

Handle 0x0016, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0015
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: SODIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: Unknown
Type Detail: Synchronous
Speed: 800 MHz (1.2 ns)
Manufacturer:
Serial Number:
Asset Tag:
Part Number:

Handle 0x0017, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0015
Error Information Handle: No Error
Total Width: 8 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: 1
Locator: M2
Bank Locator: Bank 1
Type: DDR2
Type Detail: Synchronous
Speed: 800 MHz (1.2 ns)
Manufacturer: CE00000000000000
Serial Number: 8745833C
Asset Tag: 0836
Part Number: M4 70T5663QZ3-CF7

Handle 0x0018, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x0019, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x001A, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x0015
Partition Width: 0

Handle 0x001B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0016
Memory Array Mapped Address Handle: 0x001A
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown

Handle 0x001C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0017
Memory Array Mapped Address Handle: 0x001A
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown

Handle 0x001D, DMI type 22, 26 bytes
Portable Battery
Location: main
Manufacturer: Foxlink
Manufacture Date: Samsung
Serial Number: e00513402C37C32001754
Name:
Chemistry: Lithium Ion
Design Capacity: 48840 mWh
Design Voltage: 11100 mV
SBDS Version: 00
Maximum Error: Unknown
OEM-specific Information: 0x00000000

Handle 0x001E, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown

Handle 0x001F, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown

Handle 0x0020, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59

Handle 0x0021, DMI type 26, 20 bytes
Voltage Probe
Description: Voltage Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000

Handle 0x0022, DMI type 27, 12 bytes
Cooling Device
Temperature Probe Handle: 0x0023
Type: Fan
Status: OK
OEM-specific Information: 0x00000000

Handle 0x0023, DMI type 28, 20 bytes
Temperature Probe
Description: Temperature Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000

Handle 0x0024, DMI type 29, 20 bytes
Electrical Current Probe
Description: Electrical Current Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000

Handle 0x0025, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Disabled
Outbound Connection: Enabled

Handle 0x0026, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected

Handle 0x0027, DMI type 39, 22 bytes
System Power Supply
Power Unit Group: 1
Location: To Be Defined By O.E.M
Name: To Be Defined By O.E.M
Manufacturer: To Be Defined By O.E.M
Serial Number: To Be Defined By O.E.M
Asset Tag: To Be Defined By O.E.M
Model Part Number: To Be Defined By O.E.M
Revision: 2.50
Max Power Capacity: Unknown
Status: Present, Unknown
Type: Unknown
Input Voltage Range Switching: Unknown
Plugged: Yes
Hot Replaceable: No
Input Voltage Probe Handle: 0x0021
Cooling Device Handle: 0x0022
Input Current Probe Handle: 0x0024

Handle 0x0028, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 28 00 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001

Handle 0x0029, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 29 00 FF FF

Handle 0x002A, DMI type 150, 14 bytes
OEM-specific Type
Header and Data:
96 0E 2A 00 01 01 00 00 00 00 00 00 00 00
Strings:
ABSOLUTE(PHOENIX) CLM

Handle 0x002B, DMI type 200, 7 bytes
OEM-specific Type
Header and Data:
C8 07 2B 00 01 02 03
Strings:
17C0

	0001

Handle 0x002C, DMI type 127, 4 bytes
End Of Table

#12

Bonjour

Vérifie que tu as bien installé le paquet xserver-xorg-video-intel

ensuite essaye un xorg comme le mien

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"latin9"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
Option  "AccelMethod"   "UXA" 
#Option "AccelMethod" "EXA"
#Option "MigrationHeuristic" "greedy" 
#Option "FramebufferCompression" "false"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	SubSection "Display"
     Virtual    1280 800
    EndSubSection
EndSection

Section "ServerFlags"
Option	"DontZap" "false"
EndSection

Section "DRI"
	 Mode	0666
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection

Relance et vérifie que l’accélération de ta carte fonctionne avec $ glxinfo | grep “direct rendering”

#13

salut merci mais

glxinfo | grep "direct rendering"
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)

#14

Quelle version de debian?
quel noyau utilises tu?
As tu bien installé mesa-utils libgl1-mesa-glx libgl1-mesa-dri ?

#15

[quote=“limax”]Quelle version de debian?
quel noyau utilises tu?
As tu bien installé mesa-utils libgl1-mesa-glx libgl1-mesa-dri ?[/quote]

salut

$ apt-get install mesa-utils libgl1-mesa-glx libgl1-mesa-dri
Lecture des listes de paquets… Fait
Construction de l’arbre des dépendances
Lecture des informations d’état… Fait
mesa-utils est déjà la plus récente version disponible.
mesa-utils passé en « installé manuellement ».
libgl1-mesa-glx est déjà la plus récente version disponible.
libgl1-mesa-dri est déjà la plus récente version disponible.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
jakol:/home/jakol/# uname -r
2.6.26-2-686

#16

bonjour, :smt006

ton “dmidecode” n’est pas vraiment clair :smt017 beaucoup d’erreur.

s’il faisait

# lspci

pour connaitre sa carte graphique,apres on serait sur de ce qu’il lui faut comme install pour le pilote garphique

ainsi qu’un:

# free -m

pour voir la memoire

#17

[quote=“burty”]bonjour, :smt006

ton “dmidecode” n’est pas vraiment clair :smt017 beaucoup d’erreur.

s’il faisait

# lspci

pour connaitre sa carte graphique,apres on serait sur de ce qu’il lui faut comme install pour le pilote garphique

ainsi qu’un:

# free -m

pour voir la memoire[/quote]

salut voila un lspci et free -m
thanks

$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
04:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
08:00.0 FireWire (IEEE 1394): JMicron Technologies, Inc. Device 2380
08:00.1 System peripheral: JMicron Technologies, Inc. Device 2382
08:00.2 SD Host controller: JMicron Technologies, Inc. Device 2381
08:00.3 System peripheral: JMicron Technologies, Inc. Device 2383
08:00.4 System peripheral: JMicron Technologies, Inc. Device 2384

$free -m
total used free shared buffers cached
Mem: 1989 1585 403 0 8 1332
-/+ buffers/cache: 245 1743
Swap: 2596 0 2596

#18

tu peux également essayer de relancer gnome en remplaçant cette option de /etc/X11/xorg.conf :

par celle-ci

pour info sous lenny avec carte intel compiz marche très bien chez moi avec le xorg.conf suivant :

[code]# if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Option “AccelMethod” "XAA"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection[/code]

bon courage :slightly_smiling:

#19

tu peux également essayer à nouveau avec :

#20

dis elle est nouvelle ta carte non ? parce qu’en fait normalement xorg devrait la prendre automatiquement en intel…

[quote=“Baruch”]Section "Device"
Identifier "Configured Video Device"
Option “AccelMethod” "XAA"
EndSection[/quote]

tu peux également essayer de rajouter après La ligne identifier, l’option :