Je me tourne vers vous car Mégaburne n’arrive pas à configurer son wifi de son portable (MSI CR650-027) qui est très récent. Si vous pouvez m’aider? J’ai récupéré le firmware et le pilote mais pour l’installer, c’est un grand moment de solitude (tout en anglais technique).
Mes infos:je suis le tuto du wiki sur le wifi pour les infos à donner
wheezy/sid
2.6.38-7.dmz.2-liquorix-amd64
gnome
lspci:
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: ATI Technologies Inc AMD Radeon HD 6310 GraphicsATI
00:01.1 Audio device: ATI Technologies Inc Wrestler HDMI Audio [Radeon HD 6250/6310]
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:15.0 PCI bridge: ATI Technologies Inc SB700/SB800 PCI to PCI bridge (PCIE port 0)
00:15.2 PCI bridge: ATI Technologies Inc Device 43a2
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
lsusb:
us 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0139 Realtek Semiconductor Corp.
Bus 002 Device 002: ID 5986:0262 Acer, Inc
Bus 003 Device 002: ID 046d:c521 Logitech, Inc. Cordless Mouse Receiver
dmidecode:
SMBIOS 2.6 present.
49 structures occupying 1866 bytes.
Table at 0x000EAE40.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: E16GNAMS.105
Release Date: 01/27/2011
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 1024 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 4.6
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Micro-Star International
Product Name: MS-16GN
Version: E16GNAMS.105
Serial Number: System Serial Number
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: Power Switch
SKU Number: To be filled by O.E.M.
Family: To be filled by O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: MSI
Product Name: MS-16GN
Version: Ver 1.000
Serial Number: BSS-0123456789
Asset Tag: To be filled by O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To be filled by O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: To Be Filled By O.E.M.
Type: Desktop
Lock: Not Present
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000001
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 42 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family:
Manufacturer: AMD E-350 Process
ID: 10 0F 50 00 FF FB 8B 17
Version: AMD E-350 Processor
Voltage: 1.3 V
External Clock: 100 MHz
Max Speed: 1600 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 2
Core Enabled: 2
Characteristics:
64-bit capable
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 2-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 16-way Set-associative
Handle 0x0007, DMI type 126, 19 bytes
Inactive
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: None
External Reference Designator: TV Out
External Connector Type: Mini Centronics Type-14
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2A
Internal Connector Type: None
External Reference Designator: COM A
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2B
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9A1 - TPM HDR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9C1 - PCIE DOCKING CONN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2B3 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6C2 - EXT HDMI
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3C1 - GMCH FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1D1 - ITP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E2 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E4 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E3 - LPC HOT DOCKING
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E1 - SCAN MATRIX
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G1 - LPC SIDE BAND
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8F1 - UNIFIED
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6F1 - LVDS
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2F1 - LAI FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2G1 - GFX VID
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1G6 - AC JACK
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0020, DMI type 9, 17 bytes
System Slot Information
Designation: J6B2
Type: x16 PCI Express
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0021, DMI type 9, 17 bytes
System Slot Information
Designation: J6B1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0022, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: To Be Filled By O.E.M.
Handle 0x0023, DMI type 11, 5 bytes
OEM Strings
String 1: To Be Filled By O.E.M.
Handle 0x0024, DMI type 12, 5 bytes
System Configuration Options
Option 1: To Be Filled By O.E.M.
Handle 0x0025, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0026, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0025
Partition Width: 0
Handle 0x0029, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0025
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A1_DIMM1
Bank Locator: A1_BANK1
Type:
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: Undefined
Serial Number: 000000C5
Asset Tag: A1_AssetTagNum1
Part Number: SSZ3128M8-EDJEF
Handle 0x002A, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0029
Memory Array Mapped Address Handle: 0x0026
Partition Row Position: 1
Handle 0x002B, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x002C, DMI type 41, 11 bytes
Unknown Type
Header and Data:
29 0B 2C 00 01 83 01 00 00 00 10
Strings:
Onboard IGD
Handle 0x002D, DMI type 41, 11 bytes
Unknown Type
Header and Data:
29 0B 2D 00 01 85 01 00 00 00 C8
Strings:
Onboard LAN
Handle 0x002E, DMI type 41, 11 bytes
Unknown Type
Header and Data:
29 0B 2E 00 01 81 01 00 00 03 E2
Strings:
Onboard 1394
Handle 0x0027, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0025
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A1_DIMM0
Bank Locator: A1_BANK0
Type:
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: Undefined
Serial Number: 000000C4
Asset Tag: A1_AssetTagNum0
Part Number: SSZ3128M8-EDJEF
Handle 0x0028, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FFFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0027
Memory Array Mapped Address Handle: 0x0026
Partition Row Position: 1
Handle 0x002F, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
eng
Currently Installed Language: eng
Handle 0x0030, DMI type 127, 4 bytes
End Of Table
Le readme du paquet (firmware, driver …) téléchargé sur sourceforge :
Release Date: 2010-1116, ver 0005
RTL8192CE Linux driver
–This driver supports RealTek rtl8192CE/8188CE PCI Wireless LAN NIC for
2.6 kernel:
Fedora Core, Debian, Mandriva, Open SUSE, Gentoo,
Ubuntu 7.10/8.04/8.10/9.04/9.10/10.04/10.10,
moblin(V2), android-x86_090916, etc.
2.4 kernel:
Redhat 9.0/9.1
========================================================================================
I. Component
The driver is composed of several parts:
1. Firmare to make nic work
1.1 firmare/RTL8192CE
2. Module source code
2.1 rtllib
2.2 HAL/rtl8192
3. Script to build the modules
3.1 Makefile
4. Example of supplicant configuration file:
4.1 wpa1.conf
5. Script to run wpa_supplicant
5.1 runwpa
========================================================================================
II. Compile & Installation & uninstall
You can enter top-level directory of driver and execute follwing command to
Compile, Installation, or uninstall the driver:
1. Change to Super User
sudo su
2. Compile driver from the source code
make
3. Install the driver to the kernel
make install
reboot
4. uninstall driver
make uninstall
========================================================================================
III. Start Up Wireless
You can use two methord to start up wireless:
1. Install driver like II. and reboot OS, Wireless will be brought
up by GUI, such as NetworkManager
2. If Wireless is not brought up by GUI, you can use:
ifconfig wlan0 up
Note: some times when you have two wireless NICs on your computer,
interface "wlan0" may be changed to "wlan1" or "wlan2", etc.
So before "ifconfig wlan0 up", you can use "iwconfig" to check
which interface our NIC is.
Note: Don't try to down driver by "ifconfig wlan0 down" when
NetworkManager id opened, because NetworkManager will up
driver automatically.
========================================================================================
IV. Wireless UI & NetworkManager
1. All latest distributions have UI & NetworkManager to like with AP.
And it's more easy to link with AP than commandline,
So we suggest you use UI to link with AP.
2. Don't try to like with AP use commandline with UI or NetworkManager opened.
3. If you still used commandline to link with AP, Please check if
NetworkManager & wpa_supplicant is killed by follwing command:
ps -x | grep NetworkManager
ps -x | grep wpa_supplicant
4. Follwing commandlines(V-VII) are all used under Linux without UI.
========================================================================================
V. Set wireless lan MIBs
This driver uses Wireless Extension as an interface allowing you to set
Wireless LAN specific parameters.
1. Current driver supports "iwlist" to show the device status of nic
iwlist wlan0 [parameters]
you can use follwing parameters:
parameter explaination [parameters]
----------------------- -------------
Show available chan and freq freq / channel
Show and Scan BSS and IBSS scan[ning]
Show supported bit-rate rate / bit[rate]
For example:
iwlist wlan0 channel
iwlist wlan0 scan
iwlist wlan0 rate
2. Driver also supports "iwconfig", manipulate driver private ioctls,
to set MIBs.
iwconfig wlan0 [parameters] [val]
you can use follwing parameters:
parameter explaination [parameters] [val] constraints
----------------------- ------------- ------------------
Connect to AP by address ap [mac_addr]
Set the essid, join (I)BSS essid [essid]
Set operation mode mode {Managed|Ad-hoc}
Set keys and security mode key/enc[ryption] {N|open|restricted|off}
For example:
iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
iwconfig wlan0 essid "ap_name"
iwconfig wlan0 mode Ad-hoc
iwconfig wlan0 essid "name" mode Ad-hoc
iwconfig wlan0 key 0123456789 [2] open
iwconfig wlan0 key off
iwconfig wlan0 key restricted [3] 0123456789
iwconfig wlan0 key s:12345
Note: There are two types of key, "hex" code or "ascii" code. "hex" code
only contains hexadecimal characters, "ascii" code is consist of
"ascii" characters. Assume the "hex" code key is "0123456789", you
are suggested to use command like this "iwconfig wlan0 key 0123456789".
Assume the "ascii" code key is "12345", you should enter command
like this "iwconfig wlan0 key s:12345".
Note: Better to set these MIBS without GUI such as NetworkManager and be
sure that our nic has been brought up before these settings. WEP key
index 2-4 is not supportted by NetworkManager.
========================================================================================
VI. Getting IP address (For OS without UI)
Before transmit/receive data, you should obtain an IP address use one of
the follwing method:
1. static IP address:
ifconfig wlan0 IP_ADDRESS
2. dynamic IP address using DHCP:
dhclient wlan0
========================================================================================
VII. WPAPSK/WPA2PSK (For OS without UI)
Wpa_supplicant helps you to link with WPA/WPA2(include WPA Enterprise) AP,
in Linux with NetworkManger & UI, UI will help you to link with AP,
But if there is no UI & Networkmanger in your Linux, you can use
follwing method to link with WPA/WPA2 AP.
1. we suppose that your Linux have installed wpa_supplicant &
kernel build with WIRELESS_EXT, In fact, lots of distributions
have done like this.
But if some distribution not install wpa_supplicant,
please download wpa_supplicant from webset and install it.
2. Edit wpa1.conf to set up SSID and its passphrase.
For example, the following setting in "wpa1.conf"
means SSID to join is "BufAG54_Ch6" and its
passphrase is "87654321".
network={
ssid="BufAG54_Ch6"
#scan_ssid=1 //see note 3
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="87654321"
priority=2
}
You can download wpa_supplicant and read wpa_supplicant.conf
for more examples.
3. Execute WPA supplicant:
For WEXT interface please use:
wpa_supplicant -D wext -c wpa1.conf -i wlan0
For IPW interface please use:
wpa_supplicant -D ipw -c wpa1.conf -i wlan0
Notice: If the version of Wireless Extension in your system
is equal or larger than 18, WEXT driver interface is
recommended. Otherwise, IPW driver interface is advised.
you can use "iwconfig -v" To check the version of
wireless extension.
4. To see detailed description for driver interface and wpa_supplicant,
please type:
man wpa_supplicant
J’arrête là et s’il faut d’autres infos, signalez-le moi.
Merci d’avance.