Configurer Wifi Radar pour se connecter a une freebox

Bonjour.
Je suis nouveau sur ce site et totalement nouveau sous linux. (non ne partez pas tous SVP :smiley: )
la tache risque donc d’être rude!
J’explique donc ma situation. je possède chez moi deux ordi: un sous Windows et l’autre tournant sous linux depuis deux jours.
C’est un amis qui est venu m’aider a faire la migration depuis windows. Il m’a quasi tout installer en m’expliquant bien sur et en me laissant deux trois tache a finir tout seul histoire de voir si je me débrouille… et bien c’est pas gagné!!!

Je n’arrive pas en effet a configurer wifi Radar pour qu’il puisse se connecté a ma freebox
En automatique j’ai le message suivant " could not get ip address" et en manuel en me basant de mon expérience windowsienne cela ne marche pas…

Quelles sont les informations dont vous auriez besoin pour m’aider?

merci

Je donnes ici un maximum d’info.
je tourne donc sous debian 2.6.2

araki@machine:~$ uname -a
Linux machine 2.6.22-3-486 #1 Mon Nov 12 07:53:08 UTC 2007 i686 GNU/Linux

araki@machine:~$ lspci
00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev b2)
00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2)
00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2)
00:00.3 RAM memory: nVidia Corporation Unknown device 01aa (rev b2)
00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev c3)
00:01.1 SMBus: nVidia Corporation nForce PCI System Management (rev c1)
00:02.0 USB Controller: nVidia Corporation nForce USB Controller (rev c3)
00:03.0 USB Controller: nVidia Corporation nForce USB Controller (rev c3)
00:04.0 Ethernet controller: nVidia Corporation nForce Ethernet Controller (rev c2)
00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2)
00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge (rev c2)
00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3)
00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge (rev b2)
01:00.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
01:01.0 Mass storage controller: Promise Technology, Inc. 20269 (rev 02)
01:02.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
01:02.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
01:02.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
02:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
02:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)

araki@machine:~$ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
araki@machine:~$

machine:/home/araki# dmidecode

dmidecode 2.9

SMBIOS 2.3 present.
32 structures occupying 1039 bytes.
Table at 0x000F0800.

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Award Software International, Inc.
Version: MS-6367
Release Date: 09/04/2002
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
Function key-initiated network boot is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: HP Pavilion 05
Product Name: DA102A-ABF 423.
Version: 3010211RE101MAMBO
Serial Number: NL24810979 FR240
UUID: 00A09DF9-3802-D711-8544-8AE127278698
Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-6367
Version:
Serial Number:

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket A
Type: Central Processor
Family: Duron
Manufacturer: AMD
ID: 80 06 00 00 FF FB 83 03
Signature: Family 6, Model 8, Stepping 0
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
Version: Athlon™ XP
Voltage: 1.4 V
External Clock: 133 MHz
Max Speed: 2200 MHz
Current Speed: 1533 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:

Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 8-bit Parity
Error Correcting Capabilities:
Single-bit Error Correcting
Supported Interleave: Four-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 4096 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
Other
Unknown
Standard
FPM
EDO
Parity
ECC
SIMM
DIMM
SDRAM
Memory Module Voltage: 5.0 V 3.3 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities: None

Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0 1
Current Speed: 10 ns
Type: Other
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: 10 ns
Type: Other
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK

Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown

Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 256 KB
Maximum Size: 256 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator:
External Connector Type: None
Port Type: Other

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator:
External Connector Type: None
Port Type: Other

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator:
External Connector Type: None
Port Type: 8251 FIFO Compatible

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: Other
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator: Detected
External Connector Type: PS/2
Port Type: Mouse Port

Handle 0x0011, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided

Handle 0x0012, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided

Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 240
Characteristics:
5.0 V is provided

Handle 0x0014, DMI type 10, 10 bytes
On Board Device 1 Information
Type: Video
Status: Disabled
Description: GeForce2 MX graphics core
On Board Device 2 Information
Type: Ethernet
Status: Enabled
Description: NVIDIA MAC
On Board Device 3 Information
Type: Sound
Status: Enabled
Description: AC97 Audio Codec

Handle 0x0015, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: In Use
Length: Long
ID: 240
Characteristics:
5.0 V is provided

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator:
External Connector Type: Other
Port Type: USB

Handle 0x0017, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1

Handle 0x0018, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1 GB
Error Information Handle: Not Provided
Number Of Devices: 2

Handle 0x0019, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None

Handle 0x001A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None

Handle 0x001B, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000003FFFF
Range Size: 256 kB
Physical Array Handle: 0x0018
Partition Width: 0

Handle 0x001C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000003FFFF
Range Size: 256 kB
Physical Device Handle: 0x0019
Memory Array Mapped Address Handle: 0x001B
Partition Row Position: 1

Handle 0x001D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000003FFFF
Range Size: 256 kB
Physical Device Handle: 0x001A
Memory Array Mapped Address Handle: 0x001B
Partition Row Position: 1

Handle 0x001E, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected

Handle 0x001F, DMI type 127, 4 bytes
End Of Table

machine:/home/araki#

Pour commencer… bienvenue dans le monde de linux 8) , qui plus est Debian !

On va déjà continuer à récolter des infos sur ta config machine et réseau :
:arrow_right: Quel environnement graphique utilise-tu ? (KDE, Gnome, etc.)
:arrow_right: Quel chiffrement utilise-tu pour le wifi ? (WPA, WEP)
:arrow_right: Le DHCP est-il bien activé sur ta freebox (on sais jamais :wink: )
:arrow_right: Sais-tu quel module tu utilise pour ta carte wifi (peut être qu’il pose pb)

Voilà je pense dans un premier temps

:smt006

Merci ^^’
:arrow_right: Alors l’environnement graphique que j’utilise est Gnome
:arrow_right: La clef est une clef wpa (tkip) (avant j’ai essayé avec une tkip+aes et ça ne marchais pas non plus)
:arrow_right: Oui le DHCP est activé :smt006
:arrow_right: Euuu alors la … non pas du tout… je trouve ca comment… et ça correspond a quoi? je peux juste te dire que la carte wifi est activée et que j’essaye d’utiliser wifi radar pour me connecter…

Merci

Je pense que pour le wifi c’est le module rt2500 qui est utilisé.
J’avais fait un tuto pour connecter une carte rt2500 avec WPA dans truc & astuces.

Ce tuto est extrait du site original rt2500.

Si la ligne de commande ne te fait pas peur…

A l’époque, j’avais configuré mon adresse en statique car le DHCP ne marchait pas (ou plutôt je n’ai pas su le faire fonctionner :stuck_out_tongue: ).

Ok merci je vais voir aujourd’hui se que je peux faire :smt005