a voir…
dmesg | grep wifi
[ 4.538631] iwlwifi 0000:25:00.0: setting latency timer to 64
[ 4.538653] iwlwifi 0000:25:00.0: pci_resource_len = 0x00002000
[ 4.538655] iwlwifi 0000:25:00.0: pci_resource_base = ffffc90000c74000
[ 4.538657] iwlwifi 0000:25:00.0: HW Revision ID = 0x3E
[ 4.538809] iwlwifi 0000:25:00.0: irq 48 for MSI/MSI-X
[ 4.538847] iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 4.538938] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 4.555451] iwlwifi 0000:25:00.0: device EEPROM VER=0x43a, CALIB=0x6
[ 4.555452] iwlwifi 0000:25:00.0: Device SKU: 0X1f0
[ 4.555454] iwlwifi 0000:25:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 4.555470] iwlwifi 0000:25:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 4.559718] iwlwifi 0000:25:00.0: firmware: agent loaded iwlwifi-6000-4.ucode into memory
[ 4.559727] iwlwifi 0000:25:00.0: loaded firmware version 9.221.4.1 build 25532
[ 8.400294] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 8.407151] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 8.653089] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 8.659907] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 340.980770] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 340.987619] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 341.413545] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 341.420400] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 342.106305] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 342.113154] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 342.682756] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 342.689581] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 343.298891] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 343.305723] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 353.481576] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 353.488421] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 382.770124] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 382.776960] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 382.970185] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 382.977019] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 383.943646] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 383.950462] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 544.380470] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 544.387310] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 547.116852] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 547.123675] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 547.333994] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 547.340833] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 548.239515] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 548.246339] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
dmesg :
[ 1.502275] Freeing unused kernel memory: 648k freed
[ 1.503920] Freeing unused kernel memory: 688k freed
[ 1.511595] udevd[58]: starting version 175
[ 1.524203] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.525846] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 1.525849] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.525890] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.525991] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1.531637] usbcore: registered new interface driver usbfs
[ 1.531658] usbcore: registered new interface driver hub
[ 1.531807] SCSI subsystem initialized
[ 1.539784] usbcore: registered new device driver usb
[ 1.540135] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.542157] sdhci: Secure Digital Host Controller Interface driver
[ 1.542160] sdhci: Copyright(c) Pierre Ossman
[ 1.542397] sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30)
[ 1.542453] sdhci-pci 0000:24:00.1: setting latency timer to 64
[ 1.542476] mmc0: no vmmc regulator found
[ 1.542506] Registered led device: mmc0::
[ 1.545513] libata version 3.00 loaded.
[ 1.554114] mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA
[ 1.554134] sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 1.554158] sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface.
[ 1.554196] firewire_ohci 0000:24:00.0: setting latency timer to 64
[ 1.560024] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.560028] ACPI: Thermal Zone [CPUZ] (37 C)
[ 1.578871] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.578874] ACPI: Thermal Zone [GFXZ] (26 C)
[ 1.588650] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.588652] ACPI: Thermal Zone [EXTZ] (47 C)
[ 1.598636] thermal LNXTHERM:03: registered as thermal_zone3
[ 1.598638] ACPI: Thermal Zone [LOCZ] (17 C)
[ 1.608603] thermal LNXTHERM:04: registered as thermal_zone4
[ 1.608605] ACPI: Thermal Zone [BATZ] (20 C)
[ 1.609001] thermal LNXTHERM:05: registered as thermal_zone5
[ 1.609004] ACPI: Thermal Zone [PCHZ] (127 C)
[ 1.609145] thermal LNXTHERM:06: registered as thermal_zone6
[ 1.609148] ACPI: Thermal Zone [DM1Z] (0 C)
[ 1.609239] thermal LNXTHERM:07: registered as thermal_zone7
[ 1.609241] ACPI: Thermal Zone [DM2Z] (0 C)
[ 1.615168] firewire_ohci: Added fw-ohci device 0000:24:00.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x10
[ 1.730469] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 9c:b6:54:a3:a2:40
[ 1.730472] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.730510] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.730571] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.730575] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.730598] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.730626] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.734519] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.734535] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4439000
[ 1.747072] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.747116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.747118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.747120] usb usb1: Product: EHCI Host Controller
[ 1.747121] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.747123] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.747279] hub 1-0:1.0: USB hub found
[ 1.747286] hub 1-0:1.0: 3 ports detected
[ 1.747440] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.747444] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.747455] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.747481] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.751358] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.751364] ehci_hcd 0000:00:1d.0: irq 16, io mem 0xd4438000
[ 1.767061] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.767112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.767114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.767115] usb usb2: Product: EHCI Host Controller
[ 1.767117] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.767118] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.767262] hub 2-0:1.0: USB hub found
[ 1.767268] hub 2-0:1.0: 3 ports detected
[ 1.767412] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 1.767416] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
[ 1.767473] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.767479] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.767497] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.767617] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.767665] xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X
[ 1.767723] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.767725] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.767727] usb usb3: Product: xHCI Host Controller
[ 1.767729] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.767731] usb usb3: SerialNumber: 0000:00:14.0
[ 1.767853] xHCI xhci_add_endpoint called for root hub
[ 1.767855] xHCI xhci_check_bandwidth called for root hub
[ 1.767890] hub 3-0:1.0: USB hub found
[ 1.767899] hub 3-0:1.0: 4 ports detected
[ 1.767969] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.767976] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.767992] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.767994] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.767995] usb usb4: Product: xHCI Host Controller
[ 1.767996] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.767997] usb usb4: SerialNumber: 0000:00:14.0
[ 1.768107] xHCI xhci_add_endpoint called for root hub
[ 1.768110] xHCI xhci_check_bandwidth called for root hub
[ 1.768138] hub 4-0:1.0: USB hub found
[ 1.768147] hub 4-0:1.0: 4 ports detected
[ 1.799130] ahci 0000:00:1f.2: version 3.0
[ 1.799230] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 1.799280] ahci: SSS flag set, parallel bus scan disabled
[ 1.815078] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[ 1.815081] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 1.815086] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.847636] scsi0 : ahci
[ 1.847748] scsi1 : ahci
[ 1.847814] scsi2 : ahci
[ 1.847878] scsi3 : ahci
[ 1.847933] scsi4 : ahci
[ 1.847986] scsi5 : ahci
[ 1.848162] ata1: SATA max UDMA/133 abar m2048@0xd4437000 port 0xd4437100 irq 47
[ 1.848165] ata2: SATA max UDMA/133 abar m2048@0xd4437000 port 0xd4437180 irq 47
[ 1.848167] ata3: DUMMY
[ 1.848169] ata4: SATA max UDMA/133 abar m2048@0xd4437000 port 0xd4437280 irq 47
[ 1.848171] ata5: SATA max UDMA/133 abar m2048@0xd4437000 port 0xd4437300 irq 47
[ 1.848174] ata6: SATA max UDMA/133 abar m2048@0xd4437000 port 0xd4437380 irq 47
[ 2.058969] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.115093] firewire_core: created device fw0: GUID ffe473fffffffffe, S400
[ 2.166955] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.167725] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.167730] ata1.00: supports DRM functions and may not be fully accessible
[ 2.167789] ata1.00: ATA-9: SAMSUNG MZ7PD256HAFV-000H7, DXM05H6Q, max UDMA/133
[ 2.167792] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.168111] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.168115] ata1.00: supports DRM functions and may not be fully accessible
[ 2.168172] ata1.00: configured for UDMA/133
[ 2.175136] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PD256 DXM0 PQ: 0 ANSI: 5
[ 2.191362] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.191369] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.191644] hub 1-1:1.0: USB hub found
[ 2.191708] hub 1-1:1.0: 6 ports detected
[ 2.302894] Refined TSC clocksource calibration: 2993.201 MHz.
[ 2.302913] Switching to clocksource tsc
[ 2.302957] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.435274] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.435281] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.435551] hub 2-1:1.0: USB hub found
[ 2.435623] hub 2-1:1.0: 8 ports detected
[ 2.494836] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.499142] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.499154] ata2.00: ATAPI: hp DVDRAM GT80N, R102, max UDMA/100
[ 2.505469] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.505484] ata2.00: configured for UDMA/100
[ 2.506997] usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
[ 2.518077] scsi 1:0:0:0: CD-ROM hp DVDRAM GT80N R102 PQ: 0 ANSI: 5
[ 2.733362] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b270
[ 2.733368] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.733372] usb 1-1.3: Product: HP HD Webcam [Fixed]
[ 2.733376] usb 1-1.3: Manufacturer: Chicony
[ 2.834723] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.154621] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.474518] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.478412] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.478626] sd 0:0:0:0: [sda] Write Protect is off
[ 3.478628] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.478700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.479627] sda: sda1 sda2 < sda5 >
[ 3.479848] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.479851] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.479934] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.479944] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.481077] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.481146] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.051605] PM: Starting manual resume from disk
[ 4.051608] PM: Hibernation image partition 8:5 present
[ 4.051609] PM: Looking for hibernation image.
[ 4.051770] PM: Image not found (code -22)
[ 4.051773] PM: Hibernation image not present or could not be loaded.
[ 4.060034] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.286504] udevd[407]: starting version 175
[ 4.327586] ACPI: Requesting acpi_cpufreq
[ 4.328691] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 4.328698] ACPI: Sleep Button [SLPB]
[ 4.329399] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.329444] ACPI: Lid Switch [LID]
[ 4.329494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.329498] ACPI: Power Button [PWRF]
[ 4.339720] iTCO_vendor_support: vendor-support=0
[ 4.340595] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.341188] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.341246] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.344781] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.363480] cfg80211: Calling CRDA to update world regulatory domain
[ 4.363698] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.363701] Disabling lock debugging due to kernel taint
[ 4.400712] [fglrx] Maximum main memory to use for locked dma buffers: 7707 MBytes.
[ 4.401143] [fglrx] vendor: 1002 device: 6841 count: 1
[ 4.401417] [fglrx] ioport: bar 4, base 0x4000, size: 0x100
[ 4.401433] pci 0000:01:00.0: setting latency timer to 64
[ 4.401517] [fglrx] Kernel PAT support is enabled
[ 4.401535] [fglrx] module loaded - fglrx 8.98.2 [Jul 19 2012] with 1 minors
[ 4.409077] hp_accel: hardware type HPB64xx found
[ 4.409809] lis3lv02d: 8 bits 3DC sensor found
[ 4.415077] acpi device:01: registered as cooling_device4
[ 4.416558] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 4.418185] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 4.433635] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.438463] cfg80211: World regulatory domain updated:
[ 4.438465] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.438467] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.438469] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.438471] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.438473] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.438474] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.450184] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 4.450325] Registered led device: hp::hddprotect
[ 4.450350] hp_accel: driver loaded
[ 4.518205] ACPI: Battery Slot [BAT0] (battery present)
[ 4.518356] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.522869] Linux media interface: v0.10
[ 4.527117] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.531568] Linux video capture interface: v2.00
[ 4.538578] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 4.538581] Copyright(c) 2003-2011 Intel Corporation
[ 4.538631] iwlwifi 0000:25:00.0: setting latency timer to 64
[ 4.538653] iwlwifi 0000:25:00.0: pci_resource_len = 0x00002000
[ 4.538655] iwlwifi 0000:25:00.0: pci_resource_base = ffffc90000c74000
[ 4.538657] iwlwifi 0000:25:00.0: HW Revision ID = 0x3E
[ 4.538746] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b270)
[ 4.538809] iwlwifi 0000:25:00.0: irq 48 for MSI/MSI-X
[ 4.538847] iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 4.538938] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 4.544288] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 4.544293] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 4.544379] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 4.544406] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.555451] iwlwifi 0000:25:00.0: device EEPROM VER=0x43a, CALIB=0x6
[ 4.555452] iwlwifi 0000:25:00.0: Device SKU: 0X1f0
[ 4.555454] iwlwifi 0000:25:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 4.555470] iwlwifi 0000:25:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 4.559718] iwlwifi 0000:25:00.0: firmware: agent loaded iwlwifi-6000-4.ucode into memory
[ 4.559727] iwlwifi 0000:25:00.0: loaded firmware version 9.221.4.1 build 25532
[ 4.559863] Registered led device: phy0-led
[ 4.562058] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.569042] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[ 4.569102] usbcore: registered new interface driver uvcvideo
[ 4.569104] USB Video Class driver (1.1.1)
[ 4.586055] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 4.602390] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.602631] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.602816] input: HDA Intel PCH Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.603049] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.603725] snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
[ 4.603760] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 4.621377] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 4.621560] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 4.930440] ACPI: AC Adapter [AC] (off-line)
[ 4.932109] wmi: Mapper loaded
[ 5.012162] input: HP WMI hotkeys as /devices/virtual/input/input14
[ 5.222066] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.222183] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[ 5.303131] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input15
[ 5.903605] Adding 7772156k swap on /dev/sda5. Priority:-1 extents:1 across:7772156k SS
[ 5.923586] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.102944] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400
[ 6.130177] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.147126] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
[ 6.158912] loop: module loaded
[ 6.928984] RPC: Registered named UNIX socket transport module.
[ 6.928991] RPC: Registered udp transport module.
[ 6.928995] RPC: Registered tcp transport module.
[ 6.928998] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.935136] FS-Cache: Loaded
[ 6.944168] FS-Cache: Netfs 'nfs' registered for caching
[ 6.950137] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.359324] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.366409] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.375120] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.176486] vboxdrv: Found 4 processor cores.
[ 8.176636] vboxdrv: fAsync=0 offMin=0x322 offMax=0x6656
[ 8.176696] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.176698] vboxdrv: Successfully loaded version 4.3.4 (interface 0x001a0005).
[ 8.260054] Bluetooth: Core ver 2.16
[ 8.260071] NET: Registered protocol family 31
[ 8.260073] Bluetooth: HCI device and connection manager initialized
[ 8.260076] Bluetooth: HCI socket layer initialized
[ 8.260078] Bluetooth: L2CAP socket layer initialized
[ 8.260129] Bluetooth: SCO socket layer initialized
[ 8.261170] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.262971] Bluetooth: RFCOMM TTY layer initialized
[ 8.262976] Bluetooth: RFCOMM socket layer initialized
[ 8.262977] Bluetooth: RFCOMM ver 1.11
[ 8.280541] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.280544] Bluetooth: BNEP filters: protocol multicast
[ 8.316984] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.317482] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.348201] [fglrx] ATIF platform detected with notification ID: 0xd0
[ 8.358682] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[ 8.366447] lp0: using parport0 (interrupt-driven).
[ 8.368102] ppdev: user-space parallel port driver
[ 8.398726] vboxpci: IOMMU not found (not registered)
[ 8.400294] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 8.407151] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 8.653089] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 8.659907] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 8.744810] fglrx_pci 0000:01:00.0: irq 51 for MSI/MSI-X
[ 8.745288] [fglrx] Firegl kernel thread PID: 3492
[ 8.745412] [fglrx] Firegl kernel thread PID: 3493
[ 8.745524] [fglrx] Firegl kernel thread PID: 3494
[ 8.745623] [fglrx] IRQ 51 Enabled
[ 8.764316] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.912700] [fglrx] Gart USWC size:1280 M.
[ 8.912706] [fglrx] Gart cacheable size:508 M.
[ 8.912729] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 8.912733] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 8.912737] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 15.276289] wlan0: authenticate with 00:12:17:13:0c:e1 (try 1)
[ 15.278091] wlan0: authenticated
[ 15.343176] wlan0: associate with 00:12:17:13:0c:e1 (try 1)
[ 15.346346] wlan0: RX AssocResp from 00:12:17:13:0c:e1 (capab=0x431 status=0 aid=2)
[ 15.346348] wlan0: associated
[ 15.350198] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 25.489349] FS-Cache: Netfs 'cifs' registered for caching
[ 25.903361] wlan0: no IPv6 routers present
[ 35.492352] CIFS VFS: Error connecting to socket. Aborting operation
[ 35.492504] CIFS VFS: cifs_mount failed w/return code = -115
[ 41.266730] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd
[ 41.363236] usb 1-1.2: New USB device found, idVendor=0458, idProduct=003a
[ 41.363243] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 41.363247] usb 1-1.2: Product: Optical Mouse
[ 41.363250] usb 1-1.2: Manufacturer: Genius
[ 41.395638] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input18
[ 41.396133] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 41.396174] usbcore: registered new interface driver usbhid
[ 41.396177] usbhid: USB HID core driver
[ 45.733135] CIFS VFS: Error connecting to socket. Aborting operation
[ 45.733284] CIFS VFS: cifs_mount failed w/return code = -115
[ 55.733948] CIFS VFS: Error connecting to socket. Aborting operation
[ 55.734102] CIFS VFS: cifs_mount failed w/return code = -115
[ 340.887122] wlan0: deauthenticating from 00:12:17:13:0c:e1 by local choice (reason=3)
[ 340.939358] cfg80211: Calling CRDA to update world regulatory domain
[ 340.945059] cfg80211: World regulatory domain updated:
[ 340.945065] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 340.945070] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 340.945075] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 340.945079] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 340.945083] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 340.945087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 340.980770] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 340.987619] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 341.105650] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 341.413545] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 341.420400] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 341.542231] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 342.106305] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 342.113154] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 342.240734] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 342.406967] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 342.682756] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 342.689581] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 342.816140] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 342.962369] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 343.014770] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 343.016544] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 343.298891] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 343.305723] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 343.432652] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 345.745814] CIFS VFS: Error connecting to socket. Aborting operation
[ 345.745969] CIFS VFS: cifs_mount failed w/return code = -115
[ 345.756014] CIFS VFS: Error connecting to socket. Aborting operation
[ 345.756120] CIFS VFS: cifs_mount failed w/return code = -101
[ 353.481576] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 353.488421] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 353.616423] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 356.868808] CIFS VFS: Error connecting to socket. Aborting operation
[ 356.868982] CIFS VFS: cifs_mount failed w/return code = -101
[ 375.944345] CIFS VFS: Error connecting to socket. Aborting operation
[ 375.944463] CIFS VFS: cifs_mount failed w/return code = -101
[ 382.770124] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 382.776960] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 382.904876] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 382.970185] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 382.977019] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 383.103613] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 383.206086] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 383.633567] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 383.685844] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 383.687588] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 383.943646] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 383.950462] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 384.079616] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 386.240124] wlan0: authenticate with 00:12:17:13:0c:e1 (try 1)
[ 386.241881] wlan0: authenticated
[ 386.243457] wlan0: associate with 00:12:17:13:0c:e1 (try 1)
[ 386.246853] wlan0: RX AssocResp from 00:12:17:13:0c:e1 (capab=0x431 status=0 aid=2)
[ 386.246859] wlan0: associated
[ 386.251515] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 411.045078] CIFS VFS: Error connecting to socket. Aborting operation
[ 411.045260] CIFS VFS: cifs_mount failed w/return code = -115
[ 421.065836] CIFS VFS: Error connecting to socket. Aborting operation
[ 421.065955] CIFS VFS: cifs_mount failed w/return code = -115
[ 431.066657] CIFS VFS: Error connecting to socket. Aborting operation
[ 431.066763] CIFS VFS: cifs_mount failed w/return code = -115
[ 544.285124] wlan0: deauthenticating from 00:12:17:13:0c:e1 by local choice (reason=3)
[ 544.334797] cfg80211: Calling CRDA to update world regulatory domain
[ 544.340389] cfg80211: World regulatory domain updated:
[ 544.340395] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 544.340401] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 544.340405] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 544.340409] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 544.340413] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 544.340417] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 544.380470] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 544.387310] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 544.516494] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 547.116852] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 547.123675] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 547.232582] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 547.333994] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 547.340833] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 547.466843] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 547.633950] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 548.053646] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 548.109510] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 548.110077] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 548.239515] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
[ 548.246339] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[ 548.363477] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 550.537287] wlan0: authenticate with 00:12:17:13:0c:e1 (try 1)
[ 550.540399] wlan0: authenticated
[ 550.540593] wlan0: associate with 00:12:17:13:0c:e1 (try 1)
[ 550.542829] wlan0: RX AssocResp from 00:12:17:13:0c:e1 (capab=0x431 status=0 aid=2)
[ 550.542835] wlan0: associated
[ 550.547931] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 719.806918] CIFS VFS: Error connecting to socket. Aborting operation
[ 719.807049] CIFS VFS: cifs_mount failed w/return code = -115
