Contrôleur eSATA Jmicron sous Squeeze

Bonjour,

Cela fait 1 an maintenant que j’utilise ma Debian, et tout roxx :wink:

Cependant, je voudrais brancher mon disque dur externe en eSATA, car en USB c’est beaucoup trop lent, et des fois le transfert des données se fige.

Ma carte mère est une Asus P5K, avec contrôleur JMicron JMB362/363, ma version du noyau est la 2.6.32, connaissez-vous un moyen de faire reconnaître mon disque dur externe par le port eSATA ?

Quand je le branche en eSATA et que je l’allume, en tapant la commande dmesg, j’obtiens ceci :

[71728.284325] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [71728.284331] ata7.00: link online but device misclassifed [71728.284333] ata7: link online but 1 devices misclassified, retrying [71728.284336] ata7: reset failed (errno=-11), retrying in 5 secs [71732.356020] ata7: hard resetting link [71738.284036] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [71738.284042] ata7.00: link online but device misclassifed [71738.284045] ata7: link online but 1 devices misclassified, retrying [71738.284047] ata7: reset failed (errno=-11), retrying in 5 secs [71742.356020] ata7: hard resetting link [71748.288041] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [71748.288047] ata7.00: link online but device misclassifed [71748.288049] ata7: link online but 1 devices misclassified, retrying [71748.288052] ata7: reset failed (errno=-11), retrying in 30 secs [71777.356010] ata7: limiting SATA link speed to 1.5 Gbps [71777.356013] ata7: hard resetting link

Voici le retour de la commande lspci :

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 01:00.1 Audio device: ATI Technologies Inc HD48x0 audio 02:00.0 Ethernet controller: Atheros Communications L1 Gigabit Ethernet (rev b0) 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 05:01.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31) 05:02.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)

Merci de m’aider, j’en ai bien besoin :confused:

Up! svp :frowning:

Et si tu allumes le disque avant de le brancher ?
Si tu l’allumes et le branche avant de démarrer le PC ?

Bonsoir

Désolé du retard, j’ai pas reçu de notif par mail O_o

Pour répondre à tes interrogations, cela fait pareil, disque non reconnu

Merci de m’aider :slightly_smiling:

lspci -nn serait mieux (ça permet d’avoir l’identifiant du matériel, plus facile à rechercher).

Bonjour,

Voici le résultat de la commande lspci -nn :

00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] 01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30] 02:00.0 Ethernet controller [0200]: Atheros Communications L1 Gigabit Ethernet [1969:1048] (rev b0) 03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) 03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) 05:01.0 Ethernet controller [0200]: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY [13f0:0200] (rev 31) 05:02.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10) 05:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0)

J’ai rien trouvé de probant sur internet… Que renvoie la commande suivante ? (ça permettra de voir aussi les pilotes utilisés)

Au pire essaye d’installer un noyau plus récent (backports.debian.org) des fois que ça soit un bug qui ait été corrigé entre temps ?

Voilà ce que cela me renvoi :

[code]03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at feae0000 [disabled] [size=64K]
Capabilities:
Kernel driver in use: ahci

03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities:
Kernel driver in use: pata_jmicron[/code]

Bonsoir

Up ! svp ! :frowning:

Apparemment, le kernel supporte le controleur jmicron :

/lib/modules/2.6.32-5-amd64/kernel/drivers/ata/pata_jmicron.ko /usr/src/linux-headers-2.6.32-5-amd64/include/config/memstick/jmicron /usr/src/linux-headers-2.6.32-5-amd64/include/config/memstick/jmicron/38x.h /usr/src/linux-headers-2.6.32-5-amd64/include/config/pata/jmicron.h