[Debian 7] Dual screen ( 2nd ecran 90° left )

Support Debian
#1

Debian 3.2.51-1 x86_64 GNU/Linux
Debian 7.3
carte ATI RADEON 5x serie

BUT : lire lisiblement des ebook PDF sur mon second ecran.

Bonjour,

je souhaite mettre en place un dual screen ( ordi portable Principale ) avec Moniter LCD 19" ?
l ordinateur portable reste horizontale ( environ 1366*768 comme resolution et le passage a l’autre ecran se fera par la droite sur un moniteur 19"( resolution a definir ) orienté a 90° vers la droite ( l’image doit donc orienté a 90° a gauche ).
avec Windows cest tres simple mais pas avec linux.

je ne sais plus cest quoi la commande mais la bureau virtuel etait seulement 1600*1600.

J’ai tenter plein de chose : avec le gestionnaire AMD… test xorg.conf … mais le resultat etait pas satisfaisant.

c’etait un probleme que j’ai pas resolu en 2 semaine de rechercher sur google. toujours approché mais jamais ce que je souhaitais…

Si vous avez une piste ou des commande que vous voulez que je teste : n’hesitez ps !!

merci linuxiens :slightly_smiling:

#2

Salut,

Indique le retour de: [mono]xrandr[/mono]

D’ailleurs, pourquoi le résultat n’est-il pas satisfaisant, c’est les résolutions proposées qui ne te vont pas ?
Obtiens-tu des résultats avec [mono]arandr[/mono] (à installer) pour l’ajuster ?

La résolution du bureau virtuel peut éventuellement se régler avec:

#3

la commande xrandr --fb 1600x1600 met mon ecran en 1600*1600 je pense vu que c’est tronqué( pour le moment mon moniteur VGA je l’ai eteint et debranché ).

la commande xrandr me donne ça

[code]$ xrandr

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 1600 x 1600
LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0*+
1360x768 60.0
1280x768 60.0
1280x720 60.0
1024x768 60.0
1024x600 60.0
800x600 60.0
800x480 60.0
640x480 60.0
DFP1 disconnected (normal left inverted right x axis y axis)
CRT1 connected (normal left inverted right x axis y axis)
1440x900 59.9 +
1280x1024 75.0 60.0
1280x960 60.0
1280x800 60.0
1152x864 75.0 59.9
1280x768 60.0
1280x720 60.0
1024x768 75.0 70.1 60.0
1024x600 75.0 70.1 60.0
800x600 72.2 75.0 60.3 56.2
800x480 72.2 75.0 60.3 56.2
640x480 75.0 72.8 67.0 59.9
kusdy@webmail:~$ xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 1600 x 1600
LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0*+
1360x768 60.0
1280x768 60.0
1280x720 60.0
1024x768 60.0
1024x600 60.0
800x600 60.0
800x480 60.0
640x480 60.0
DFP1 disconnected (normal left inverted right x axis y axis)
CRT1 connected (normal left inverted right x axis y axis)
1440x900 59.9 +
1280x1024 75.0 60.0
1280x960 60.0
1280x800 60.0
1152x864 75.0 59.9
1280x768 60.0
1280x720 60.0
1024x768 75.0 70.1 60.0
1024x600 75.0 70.1 60.0
800x600 72.2 75.0 60.3 56.2
800x480 72.2 75.0 60.3 56.2
640x480 75.0 72.8 67.0 59.9 [/code]

ce qui ne me plaisait pas c’etait la lisibilité je crois ( c’etait ya quelque mois depuis j’avais abandonné ).

j’ai suivi ce tuto pour installer ma carte graphique AMD afin qu’il soit compatible Gnome3 : wiki.debian.org/fr/ATIProprietary

merci pour ton aide j’espere que je vais pouvoir avancer avec toi

#4

Je t’ai indiqué cette commande car tu parlais de bureau virtuel, mais je ne comprends toujours pas ce que tu cherches à faire avec tes écrans ni quel soucis tu as.

#5

je cherche a faire un dual screen en mode etendu.
l’ecran de mon pc portable c’est le principale ( A ) et le moniteur lcd 19" ( B )

donc ca fait A-B et l’image du “B” doit etre orienté 90° a gauche et moi je tourne physiquement le pc 90° a droite et voilà !!
pour aller sur l’ecran B je dois passer par la gauche de l’ecran A.

oui je parle du bureau virtual car je crois savoir que pour pouvoir faire ça. les resolutions des 2 ecran doivent pouvoir etre contenu dans celui du bureau virtuel ( DESOLE ECRAN VIRTUEL jaurai du ecrire

j’ajoute que j’ai pas AMD CATALYST donc la commande amdcccle ne fonctionne pas.

je vais tester cette solution ci : askubuntu.com/questions/71457/ho … ati-driver

#6

Et qu’est ce que ne permet pas [mono]arandr[/mono] ? (Cf: sujet-t46556.html#p466292 )

arandr permet d’activer des écrans, et de les pivoter.

#7

tu sais ya xrandr, arandr et un autre truc encore… je m’y perd un peu.
mais je me souviens davoir fait plein de test par exemple

et ca me disait que l’ecran virtuel n’est pas assez grand.

mais dis moi quelle commande tu veux que je fasse je les testerai mais ce soir

#8

xrandr est l’outil le plus roots pour configurer ses écrans.
On peut l’utiliser quand la ligne de commande ne nous rebute pas.

arandr est une interface graphique pour xrandr, beaucoup plus simple à utiliser.

D’autres environnements (Gnome/KDE) fournissent leurs propres applis de réglage de l’écran, mais puisqu’on n’a pas tous le même environnement c’est parfois plus simple d’utiliser des outils communs.

#9

j’ai installer arandr et ca me rapel bien quelque chose que j’avais deja essayer.

donc le message d’erreur c’est que la ZONE virtuelle n’est pas assez grande !

pourquoi moi j’ai juste 1600*1600 et quand je vois les tuto sur xrandr sur internet ca depasse les 2000 voir atteint 4000 pixels en hauteur ???

x.debian.net/howto/use-xrandr.html

vous savez comment l’agrandir sur debian 7.3 ??

#10
  • avec quel outil ?
  • lors de quelle manipulation ?
  • le message d’erreur exact copié/collé ?

J’aurais pensé qu’ajuster la taille de la zone (ou bureau peu importe) virtuelle n’est pas nécessaire, car devrait se faire automatiquement.
Mais l’ajuster manuellement se fait avec la commande que je t’ai indiquée plus haut (xrandr avec les paramètres, où tu remplaces 1600 par ce que tu veux).

#11

kusdy@webmail:~$ xrandr --fb 2276x2218 xrandr: screen cannot be larger than 1440x1440 (desired size 2276x2218)

le premiere ecran aura la resolution 1366x768 et le 2eme 1440*768 idealement.
ce qui fait un ecran virtuel de 2276x2218 ( j’ai rajouté 10px de marge a chaque fois ).

#12

D’après ce que je lis ici: linuxquestions.org/question … an-595649/

Ce serait plutôt:

1366 + 1440 = 2806
768 étant la hauteur la plus haute parmi tes 2 écrans => 768

L’espace virtuel: 2806x768

Ensuite, ton fichier /etc/X11/xorg.conf est-il vide ? Si non, une ligne

à côté du «Mode» concerné pourrait aider.

#13

non je souhaite pas mettre cote a cote les deux ecran.
l’un sera horizontale et l’autre verticale.
donc mes calculs sont bon.

je vais essayer de creer le fichier xorg.conf mais ca suffit de mettre juste Virtual 2806 768 ??

hier en mode root j’ai fait sur la console tty Xorg --configure
et j’ai eu une erreur Number of created screens does not match the number of detected devices

j’ai suivi ce tuto là : wiki.debian.org/fr/Xorg

sinon le probleme ne viendrai pas de la carte graphique ou des pilote non-free ??
ou alors de Gnome3 ??

#14

J’avais effectivement omis ce détail (tu fais pivoter l’écran).
Mais si je me trompe pas, ça donnerait:

1er écran: 1366x768
2ème écran: 768*1440

1366 + 768 = 2134
Et si on prend la plus grande hauteur: 1440.

Donc [mono]Virtual 2134 1440[/mono].

Perso je peux régler le truc avec [mono]xrandr --fb[/mono] sans avoir à créer ou modifier de fichier xorg.conf, mais j’ai une carte intel.

Pour ton message d’erreur avec [mono]Xorg --configure[/mono], il semble envisagé dans la doc que tu cites.
wiki.debian.org/fr/Xorg

#15

fichier 20-fglrx.conf

Section "Screen"
        Identifier   "Default Screen"
        Device       "Default Video Card"
        DefaultDepth 24
        Virtual 2806 2218
EndSection

Section "Device"
        Identifier     "Default Video Card"
        Driver         "fglrx"
EndSection

j’ai toujours 1600*1600 pour l’ecran virtuel…

ou se trouve le fichier log de xorg.conf ??
ne devrais-je réinstallé xorg ??

#16

[mono]/var/log/Xorg.0.log[/mono]

Réinstaller un paquet résoud rarement un problème sous Linux, il faut plutôt revoir sa configuration, car comme celle-ci est résidente, elle n’est pas réinitialisée lors de la réinstallation d’un paquet, sauf si on “purge” le dit paquet, et que ce paquet stoque sa configuration ailleurs que dans $HOME, ce qui est le cas de Xorg.
Donc oui, purger Xorg aurait pu aider, mais je le déconseille car ça va te retirer une bonne ribambelle d’applications…

#17

merci pour ta reponse.

en fait je me disais que j’avais peut etre pas la bonne version de xorg ??
et donc reinstallé une version “compatible” avec ma carte ati radeon 5x series…
de plus pourquoi mon fichier s’appelle “20-fglrx.conf” ?
lors de l’install de debian , comme gnome3 marché pas bien et , de plus au demarrage, javais un message d’erreur au lieu de UDEV .. fully populated
ca disait qu’il fallait installer le kernel linux non free.

ce probleme je l’ai reglé avec ce tuto wiki.debian.org/fr/ATIProprietary#configure

ensuite graphiquement c’est bien mieux.

pour info, voici le contenu du fichier log xorg

[   110.483] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[   110.483] X Protocol Version 11, Revision 0
[   110.484] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[   110.484] Current Operating System: Linux webmail.biz 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64
[   110.484] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5116a2b0-9ea2-4965-b428-b1430b2dadbf ro quiet
[   110.484] Build Date: 17 December 2013  07:37:58PM
[   110.484] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau@debian.org>) 
[   110.485] Current version of pixman: 0.26.0
[   110.485] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   110.485] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   110.486] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  3 21:13:11 2014
[   110.564] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   110.564] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   110.651] (==) No Layout section.  Using the first Screen section.
[   110.651] (**) |-->Screen "Default Screen" (0)
[   110.651] (**) |   |-->Monitor "<default monitor>"
[   110.651] (**) |   |-->Device "Default Video Card"
[   110.651] (==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
[   110.651] (==) Automatically adding devices
[   110.651] (==) Automatically enabling devices
[   110.716] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   110.716] 	Entry deleted from font path.
[   110.774] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   110.774] 	Entry deleted from font path.
[   110.774] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[   110.774] (==) ModulePath set to "/usr/lib/xorg/modules"
[   110.774] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   110.774] (II) Loader magic: 0x7f19f1f9aae0
[   110.774] (II) Module ABI versions:
[   110.774] 	X.Org ANSI C Emulation: 0.4
[   110.774] 	X.Org Video Driver: 12.1
[   110.774] 	X.Org XInput driver : 16.0
[   110.774] 	X.Org Server Extension : 6.0
[   110.775] (--) PCI:*(0:1:0:0) 1002:68e0:144d:c07f rev 0, Mem @ 0xe0000000/268435456, 0xf0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[   110.775] (II) Open ACPI successful (/var/run/acpid.socket)
[   110.775] (II) LoadModule: "extmod"
[   110.872] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   110.894] (II) Module extmod: vendor="X.Org Foundation"
[   110.894] 	compiled for 1.12.4, module version = 1.0.0
[   110.894] 	Module class: X.Org Server Extension
[   110.894] 	ABI class: X.Org Server Extension, version 6.0
[   110.894] (II) Loading extension SELinux
[   110.894] (II) Loading extension MIT-SCREEN-SAVER
[   110.894] (II) Loading extension XFree86-VidModeExtension
[   110.894] (II) Loading extension XFree86-DGA
[   110.894] (II) Loading extension DPMS
[   110.894] (II) Loading extension XVideo
[   110.894] (II) Loading extension XVideo-MotionCompensation
[   110.894] (II) Loading extension X-Resource
[   110.894] (II) LoadModule: "dbe"
[   110.894] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   110.905] (II) Module dbe: vendor="X.Org Foundation"
[   110.905] 	compiled for 1.12.4, module version = 1.0.0
[   110.905] 	Module class: X.Org Server Extension
[   110.905] 	ABI class: X.Org Server Extension, version 6.0
[   110.905] (II) Loading extension DOUBLE-BUFFER
[   110.905] (II) LoadModule: "glx"
[   110.905] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[   110.932] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   110.932] 	compiled for 6.9.0, module version = 1.0.0
[   110.933] (II) Loading extension GLX
[   110.933] (II) LoadModule: "record"
[   110.933] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   110.937] (II) Module record: vendor="X.Org Foundation"
[   110.937] 	compiled for 1.12.4, module version = 1.13.0
[   110.937] 	Module class: X.Org Server Extension
[   110.937] 	ABI class: X.Org Server Extension, version 6.0
[   110.937] (II) Loading extension RECORD
[   110.937] (II) LoadModule: "dri"
[   110.937] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   110.954] (II) Module dri: vendor="X.Org Foundation"
[   110.954] 	compiled for 1.12.4, module version = 1.0.0
[   110.954] 	ABI class: X.Org Server Extension, version 6.0
[   110.954] (II) Loading extension XFree86-DRI
[   110.954] (II) LoadModule: "dri2"
[   110.954] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   110.955] (II) Module dri2: vendor="X.Org Foundation"
[   110.955] 	compiled for 1.12.4, module version = 1.2.0
[   110.955] 	ABI class: X.Org Server Extension, version 6.0
[   110.955] (II) Loading extension DRI2
[   110.955] (II) LoadModule: "fglrx"
[   111.044] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   111.277] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[   111.277] 	compiled for 1.4.99.906, module version = 8.98.2
[   111.277] 	Module class: X.Org Video Driver
[   111.278] (II) Loading sub module "fglrxdrm"
[   111.278] (II) LoadModule: "fglrxdrm"
[   111.278] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   111.292] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   111.292] 	compiled for 1.4.99.906, module version = 8.98.2
[   111.292] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[   111.292] (II) AMD Proprietary Linux Driver Release Identifier: 8.982.13                             
[   111.292] (II) AMD Proprietary Linux Driver Build Date: Jul 19 2012 20:59:44
[   111.292] (--) using VT number 7

[   111.298] (WW) Falling back to old probe method for fglrx
[   111.361] (II) Loading PCS database from /etc/ati/amdpcsdb
[   111.362] (--) Assigning device section with no busID to primary device
[   111.362] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
[   111.363] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[   111.364] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[   111.365] (II) AMD Video driver is signed
[   111.365] (II) fglrx(0): pEnt->device->identifier=0x7f19f357d9f0
[   111.365] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[   111.365] (II) Loading sub module "vgahw"
[   111.365] (II) LoadModule: "vgahw"
[   111.366] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   111.376] (II) Module vgahw: vendor="X.Org Foundation"
[   111.376] 	compiled for 1.12.4, module version = 0.1.0
[   111.376] 	ABI class: X.Org Video Driver, version 12.1
[   111.376] (II) fglrx(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
[   111.376] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   111.376] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   111.376] (==) fglrx(0): Default visual is TrueColor
[   111.377] (==) fglrx(0): RGB weight 888
[   111.377] (II) fglrx(0): Using 8 bits per RGB 
[   111.377] (==) fglrx(0): Buffer Tiling is ON
[   111.377] (II) Loading sub module "fglrxdrm"
[   111.377] (II) LoadModule: "fglrxdrm"
[   111.377] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   111.377] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   111.377] 	compiled for 1.4.99.906, module version = 8.98.2
[   111.380] ukiDynamicMajor: found major device number 251
[   111.380] ukiDynamicMajor: found major device number 251
[   111.380] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   111.380] ukiOpenDevice: node name is /dev/ati/card0
[   111.380] ukiOpenDevice: open result is 12, (OK)
[   111.380] ukiOpenByBusid: ukiOpenMinor returns 12
[   111.380] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   111.381] (**) fglrx(0): NoAccel = NO
[   111.381] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[   111.381] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (Chipset = 0x68e0)
[   111.381] (--) fglrx(0): (PciSubVendor = 0x144d, PciSubDevice = 0xc07f)
[   111.381] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[   111.381] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[   111.381] (--) fglrx(0): MMIO registers at 0xf0020000
[   111.381] (--) fglrx(0): I/O port at 0x0000d000
[   111.381] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   111.392] (II) fglrx(0): AC Adapter is used
[   111.427] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[   111.507] (II) Loading sub module "vbe"
[   111.507] (II) LoadModule: "vbe"
[   111.507] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   111.514] (II) Module vbe: vendor="X.Org Foundation"
[   111.514] 	compiled for 1.12.4, module version = 1.1.0
[   111.514] 	ABI class: X.Org Video Driver, version 12.1
[   111.514] (II) fglrx(0): VESA BIOS detected
[   111.514] (II) fglrx(0): VESA VBE Version 3.0
[   111.514] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[   111.515] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[   111.515] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[   111.515] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[   111.515] (II) fglrx(0): VESA VBE OEM Product: PARK
[   111.515] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[   111.554] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[   111.554] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[   111.554] (II) fglrx(0): PCIE card detected
[   111.554] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   111.554] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   111.558] (II) fglrx(0): Using adapter: 1:0.0.
[   111.588] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[   112.322] (II) fglrx(0): Interrupt handler installed at IRQ 45.
[   112.322] (II) fglrx(0): RandR 1.2 support is enabled!
[   112.322] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   112.322] (==) fglrx(0): Center Mode is disabled 
[   112.322] (II) Loading sub module "fb"
[   112.322] (II) LoadModule: "fb"
[   112.323] (II) Loading /usr/lib/xorg/modules/libfb.so
[   112.361] (II) Module fb: vendor="X.Org Foundation"
[   112.361] 	compiled for 1.12.4, module version = 1.0.0
[   112.361] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   112.362] (II) Loading sub module "ddc"
[   112.362] (II) LoadModule: "ddc"
[   112.362] (II) Module "ddc" already built-in
[   112.516] (II) fglrx(0): Finished Initialize PPLIB!
[   112.531] (II) fglrx(0): Output LVDS has no monitor section
[   112.531] (II) fglrx(0): Output DFP1 has no monitor section
[   112.531] (II) fglrx(0): Output CRT1 has no monitor section
[   112.531] (II) Loading sub module "ddc"
[   112.531] (II) LoadModule: "ddc"
[   112.531] (II) Module "ddc" already built-in
[   112.531] (II) fglrx(0): Connected Display0: LVDS
[   112.531] (II) fglrx(0): Display0 EDID data ---------------------------
[   112.531] (II) fglrx(0): Manufacturer: SEC  Model: 3245  Serial#: 0
[   112.531] (II) fglrx(0): Year: 2010  Week: 0
[   112.531] (II) fglrx(0): EDID Version: 1.3
[   112.531] (II) fglrx(0): Digital Display Input
[   112.531] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   112.531] (II) fglrx(0): Gamma: 2.20
[   112.531] (II) fglrx(0): No DPMS capabilities specified
[   112.531] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   112.531] (II) fglrx(0): First detailed timing is preferred mode
[   112.531] (II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[   112.531] (II) fglrx(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[   112.531] (II) fglrx(0): Manufacturer's mask: 0
[   112.531] (II) fglrx(0): Supported detailed timing:
[   112.531] (II) fglrx(0): clock: 70.4 MHz   Image Size:  344 x 194 mm
[   112.531] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
[   112.531] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[   112.531] (II) fglrx(0): Unknown vendor-specific block f
[   112.531] (II) fglrx(0):  SAMSUNG
[   112.532] (II) fglrx(0):  LTN156AT02000
[   112.532] (II) fglrx(0): EDID (in hex):
[   112.532] (II) fglrx(0): 	00ffffffffffff004ca3453200000000
[   112.532] (II) fglrx(0): 	00140103802213780a87f594574f8c27
[   112.532] (II) fglrx(0): 	27505400000001010101010101010101
[   112.532] (II) fglrx(0): 	010101010101841b5678500016303020
[   112.532] (II) fglrx(0): 	250058c2100000190000000f00000000
[   112.532] (II) fglrx(0): 	00000000002387026401000000fe0053
[   112.532] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[   112.532] (II) fglrx(0): 	004c544e31353641543032303030005d
[   112.532] (II) fglrx(0): End of Display0 EDID data --------------------
[   112.532] (II) fglrx(0): Connected Display1: CRT1
[   112.532] (II) fglrx(0):  Display1: Failed to get EDID information. 
[   112.533] (II) fglrx(0): EDID for output LVDS
[   112.533] (II) fglrx(0): Manufacturer: SEC  Model: 3245  Serial#: 0
[   112.533] (II) fglrx(0): Year: 2010  Week: 0
[   112.533] (II) fglrx(0): EDID Version: 1.3
[   112.533] (II) fglrx(0): Digital Display Input
[   112.533] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   112.533] (II) fglrx(0): Gamma: 2.20
[   112.533] (II) fglrx(0): No DPMS capabilities specified
[   112.533] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   112.533] (II) fglrx(0): First detailed timing is preferred mode
[   112.533] (II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[   112.533] (II) fglrx(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[   112.533] (II) fglrx(0): Manufacturer's mask: 0
[   112.533] (II) fglrx(0): Supported detailed timing:
[   112.533] (II) fglrx(0): clock: 70.4 MHz   Image Size:  344 x 194 mm
[   112.533] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
[   112.533] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[   112.533] (II) fglrx(0): Unknown vendor-specific block f
[   112.533] (II) fglrx(0):  SAMSUNG
[   112.533] (II) fglrx(0):  LTN156AT02000
[   112.533] (II) fglrx(0): EDID (in hex):
[   112.533] (II) fglrx(0): 	00ffffffffffff004ca3453200000000
[   112.533] (II) fglrx(0): 	00140103802213780a87f594574f8c27
[   112.533] (II) fglrx(0): 	27505400000001010101010101010101
[   112.533] (II) fglrx(0): 	010101010101841b5678500016303020
[   112.533] (II) fglrx(0): 	250058c2100000190000000f00000000
[   112.533] (II) fglrx(0): 	00000000002387026401000000fe0053
[   112.533] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[   112.533] (II) fglrx(0): 	004c544e31353641543032303030005d
[   112.533] (II) fglrx(0): EDID vendor "SEC", prod id 12869
[   112.533] (II) fglrx(0): Printing DDC gathered Modelines:
[   112.533] (II) fglrx(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   112.533] (II) fglrx(0): Printing probed modes for output LVDS
[   112.533] (II) fglrx(0): Modeline "1366x768"x60.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz)
[   112.533] (II) fglrx(0): Modeline "1360x768"x60.0   70.44  1360 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz)
[   112.533] (II) fglrx(0): Modeline "1280x768"x60.0   70.44  1280 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz)
[   112.533] (II) fglrx(0): Modeline "1280x720"x60.0   70.44  1280 1414 1446 1486  720 770 775 790 -hsync -vsync (47.4 kHz)
[   112.533] (II) fglrx(0): Modeline "1024x768"x60.0   70.44  1024 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz)
[   112.533] (II) fglrx(0): Modeline "1024x600"x60.0   70.44  1024 1414 1446 1486  600 770 775 790 -hsync -vsync (47.4 kHz)
[   112.534] (II) fglrx(0): Modeline "800x600"x60.0   70.44  800 1414 1446 1486  600 770 775 790 -hsync -vsync (47.4 kHz)
[   112.534] (II) fglrx(0): Modeline "800x480"x60.0   70.44  800 1414 1446 1486  480 770 775 790 -hsync -vsync (47.4 kHz)
[   112.534] (II) fglrx(0): Modeline "640x480"x60.0   70.44  640 1414 1446 1486  480 770 775 790 -hsync -vsync (47.4 kHz)
[   112.534] (II) fglrx(0): EDID for output DFP1
[   112.534] (II) fglrx(0): Cannot get EDID information for CRT1
[   112.534] (II) fglrx(0): EDID for output CRT1
[   112.534] (II) fglrx(0): Not using mode "640x350" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "640x400" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "720x400" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "848x480" (unknown reason)
[   112.534] (II) fglrx(0): Not using mode "1024x768i" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1152x864" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x768" (monitor doesn't support reduced blanking)
[   112.534] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x800" (monitor doesn't support reduced blanking)
[   112.534] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x960" (unknown reason)
[   112.534] (II) fglrx(0): Not using mode "1280x960" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x960" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1360x768" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1400x1050" (monitor doesn't support reduced blanking)
[   112.534] (II) fglrx(0): Not using mode "1400x1050" (unknown reason)
[   112.534] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1440x900" (monitor doesn't support reduced blanking)
[   112.534] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[   112.534] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[   112.534] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[   112.534] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[   112.534] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[   112.535] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[   112.535] (II) fglrx(0): Printing probed modes for output CRT1
[   112.535] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[   112.535] (II) fglrx(0): Modeline "1400x1050"x60.0  122.61  1400 1488 1640 1880  1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
[   112.535] (II) fglrx(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz)
[   112.535] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[   112.535] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[   112.535] (II) fglrx(0): Modeline "1280x960"x60.0  102.10  1280 1360 1496 1712  960 961 964 994 -hsync +vsync (59.6 kHz)
[   112.535] (II) fglrx(0): Modeline "1366x768"x60.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[   112.535] (II) fglrx(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz)
[   112.535] (II) fglrx(0): Modeline "1280x800"x60.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[   112.535] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[   112.535] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz)
[   112.535] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz)
[   112.535] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   112.535] (II) fglrx(0): Modeline "1024x600"x60.0   48.96  1024 1064 1168 1312  600 601 604 622 -hsync +vsync (37.3 kHz)
[   112.535] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   112.535] (II) fglrx(0): Modeline "800x480"x60.0   29.58  800 816 896 992  480 481 484 497 -hsync +vsync (29.8 kHz)
[   112.535] (II) fglrx(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
[   112.535] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   112.535] (II) fglrx(0): Output LVDS connected
[   112.535] (II) fglrx(0): Output DFP1 disconnected
[   112.535] (II) fglrx(0): Output CRT1 connected
[   112.535] (II) fglrx(0): Using exact sizes for initial modes
[   112.535] (II) fglrx(0): Output LVDS using initial mode 1366x768
[   112.535] (II) fglrx(0): Output CRT1 using initial mode 1366x768
[   112.535] (II) fglrx(0): Setting highest common mode
[   112.535] (II) fglrx(0): Display dimensions: (340, 190) mm
[   112.535] (II) fglrx(0): DPI set to (102, 102)
[   112.535] (II) fglrx(0): Eyefinity capable adapter detected.
[   112.535] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5000 Series has 4 configurable heads and 2 displays connected.
[   112.535] (==) fglrx(0):  PseudoColor visuals disabled
[   112.535] (II) Loading sub module "ramdac"
[   112.535] (II) LoadModule: "ramdac"
[   112.535] (II) Module "ramdac" already built-in
[   112.535] (==) fglrx(0): NoDRI = NO
[   112.535] (==) fglrx(0): Capabilities: 0x00000000
[   112.535] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   112.535] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   112.536] (==) fglrx(0): UseFastTLS=0
[   112.536] (--) Depth 24 pixmap format is 32 bpp
[   112.536] (II) Loading extension ATIFGLRXDRI
[   112.536] (II) fglrx(0): doing swlDriScreenInit
[   112.536] (II) fglrx(0): swlDriScreenInit for fglrx driver
[   112.536] ukiDynamicMajor: found major device number 251
[   112.536] ukiDynamicMajor: found major device number 251
[   112.536] ukiDynamicMajor: found major device number 251
[   112.536] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   112.536] ukiOpenDevice: node name is /dev/ati/card0
[   112.536] ukiOpenDevice: open result is 13, (OK)
[   112.536] ukiOpenByBusid: ukiOpenMinor returns 13
[   112.536] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   112.536] (II) fglrx(0): [uki] DRM interface version 1.0
[   112.536] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[   112.536] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[   112.536] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f19f1ba7000
[   112.536] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[   112.536] (II) fglrx(0): [uki] added 1 reserved context for kernel
[   112.536] (II) fglrx(0): swlDriScreenInit done
[   112.536] (II) fglrx(0): Kernel Module Version Information:
[   112.536] (II) fglrx(0):     Name: fglrx
[   112.536] (II) fglrx(0):     Version: 8.98.2
[   112.536] (II) fglrx(0):     Date: Jul 19 2012
[   112.536] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[   112.536] (II) fglrx(0): Kernel Module version matches driver.
[   112.536] (II) fglrx(0): Kernel Module Build Time Information:
[   112.536] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-4-amd64
[   112.537] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[   112.537] (II) fglrx(0):     Build-Kernel __SMP__:            no
[   112.537] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[   112.537] (II) fglrx(0): [uki] register handle = 0x00004000
[   112.595] (II) fglrx(0): DRI initialization successfull
[   112.628] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[   112.635] (==) fglrx(0): Backing store disabled
[   112.635] (II) Loading extension FGLRXEXTENSION
[   112.635] (==) fglrx(0): DPMS enabled
[   112.636] (II) fglrx(0): Initialized in-driver Xinerama extension
[   112.636] (**) fglrx(0): Textured Video is enabled.
[   112.636] (II) LoadModule: "glesx"
[   112.636] (II) Loading /usr/lib/xorg/modules/glesx.so
[   112.802] (II) Module glesx: vendor="X.Org Foundation"
[   112.802] 	compiled for 1.4.99.906, module version = 1.0.0
[   112.802] (II) Loading extension GLESX
[   112.802] (II) fglrx(0): GLESX enableFlags = 592
[   112.924] (II) fglrx(0): GLESX is enabled
[   112.924] (II) LoadModule: "amdxmm"
[   112.925] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[   112.955] (II) Module amdxmm: vendor="X.Org Foundation"
[   112.955] 	compiled for 1.4.99.906, module version = 2.0.0
[   112.964] (II) Loading extension AMDXVOPL
[   112.964] (II) Loading extension AMDXVBA
[   112.979] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[   112.980] (II) fglrx(0): Enable composite support successfully
[   112.980] (II) fglrx(0): X context handle = 0x1
[   112.981] (II) fglrx(0): [DRI] installation complete
[   112.981] (==) fglrx(0): Silken mouse enabled
[   112.982] (==) fglrx(0): Using HW cursor of display infrastructure!
[   112.982] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[   112.982] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[   112.982] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[   113.976] (--) RandR disabled
[   113.976] (II) Initializing built-in extension Generic Event Extension
[   113.976] (II) Initializing built-in extension SHAPE
[   113.976] (II) Initializing built-in extension MIT-SHM
[   113.976] (II) Initializing built-in extension XInputExtension
[   113.976] (II) Initializing built-in extension XTEST
[   113.976] (II) Initializing built-in extension BIG-REQUESTS
[   113.976] (II) Initializing built-in extension SYNC
[   113.976] (II) Initializing built-in extension XKEYBOARD
[   113.976] (II) Initializing built-in extension XC-MISC
[   113.976] (II) Initializing built-in extension SECURITY
[   113.976] (II) Initializing built-in extension XINERAMA
[   113.976] (II) Initializing built-in extension XFIXES
[   113.976] (II) Initializing built-in extension RENDER
[   113.976] (II) Initializing built-in extension RANDR
[   113.976] (II) Initializing built-in extension COMPOSITE
[   113.976] (II) Initializing built-in extension DAMAGE
[   113.976] (II) SELinux: Disabled on system
[   113.978] ukiDynamicMajor: found major device number 251
[   113.978] ukiDynamicMajor: found major device number 251
[   113.978] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   113.978] ukiOpenDevice: node name is /dev/ati/card0
[   113.978] ukiOpenDevice: open result is 14, (OK)
[   113.978] ukiOpenByBusid: ukiOpenMinor returns 14
[   113.978] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   115.129] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[   115.250] (II) fglrx(0): Enable the clock gating!
[   115.250] (II) fglrx(0): Setting screen physical size to 361 x 203
[   115.658] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   115.658] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   115.658] (II) LoadModule: "evdev"
[   115.659] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   115.675] (II) Module evdev: vendor="X.Org Foundation"
[   115.675] 	compiled for 1.12.1, module version = 2.7.0
[   115.675] 	Module class: X.Org XInput Driver
[   115.675] 	ABI class: X.Org XInput driver, version 16.0
[   115.675] (II) Using input driver 'evdev' for 'Power Button'
[   115.675] (**) Power Button: always reports core events
[   115.675] (**) evdev: Power Button: Device: "/dev/input/event5"
[   115.675] (--) evdev: Power Button: Vendor 0 Product 0x1
[   115.675] (--) evdev: Power Button: Found keys
[   115.675] (II) evdev: Power Button: Configuring as keyboard
[   115.675] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[   115.675] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   115.675] (**) Option "xkb_rules" "evdev"
[   115.675] (**) Option "xkb_model" "pc105"
[   115.675] (**) Option "xkb_layout" "fr"
[   115.675] (**) Option "xkb_variant" "latin9"
[   115.758] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   115.758] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   115.758] (II) Using input driver 'evdev' for 'Video Bus'
[   115.758] (**) Video Bus: always reports core events
[   115.758] (**) evdev: Video Bus: Device: "/dev/input/event6"
[   115.758] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   115.758] (--) evdev: Video Bus: Found keys
[   115.758] (II) evdev: Video Bus: Configuring as keyboard
[   115.758] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:00/input/input6/event6"
[   115.758] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   115.758] (**) Option "xkb_rules" "evdev"
[   115.758] (**) Option "xkb_model" "pc105"
[   115.758] (**) Option "xkb_layout" "fr"
[   115.758] (**) Option "xkb_variant" "latin9"
[   115.759] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   115.759] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   115.759] (II) Using input driver 'evdev' for 'Power Button'
[   115.759] (**) Power Button: always reports core events
[   115.759] (**) evdev: Power Button: Device: "/dev/input/event3"
[   115.759] (--) evdev: Power Button: Vendor 0 Product 0x1
[   115.759] (--) evdev: Power Button: Found keys
[   115.759] (II) evdev: Power Button: Configuring as keyboard
[   115.759] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[   115.759] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   115.759] (**) Option "xkb_rules" "evdev"
[   115.759] (**) Option "xkb_model" "pc105"
[   115.759] (**) Option "xkb_layout" "fr"
[   115.759] (**) Option "xkb_variant" "latin9"
[   115.760] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   115.760] (II) No input driver specified, ignoring this device.
[   115.760] (II) This device may have been added with another device file.
[   115.760] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   115.760] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   115.760] (II) Using input driver 'evdev' for 'Sleep Button'
[   115.760] (**) Sleep Button: always reports core events
[   115.760] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[   115.760] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   115.760] (--) evdev: Sleep Button: Found keys
[   115.761] (II) evdev: Sleep Button: Configuring as keyboard
[   115.761] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[   115.761] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   115.761] (**) Option "xkb_rules" "evdev"
[   115.761] (**) Option "xkb_model" "pc105"
[   115.761] (**) Option "xkb_layout" "fr"
[   115.761] (**) Option "xkb_variant" "latin9"
[   115.761] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[   115.761] (II) No input driver specified, ignoring this device.
[   115.761] (II) This device may have been added with another device file.
[   115.762] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event12)
[   115.762] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[   115.762] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[   115.762] (**) USB 2.0 PC Camera: always reports core events
[   115.762] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event12"
[   115.762] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[   115.762] (--) evdev: USB 2.0 PC Camera: Found keys
[   115.762] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[   115.762] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12/event12"
[   115.762] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 10)
[   115.762] (**) Option "xkb_rules" "evdev"
[   115.762] (**) Option "xkb_model" "pc105"
[   115.762] (**) Option "xkb_layout" "fr"
[   115.762] (**) Option "xkb_variant" "latin9"
[   115.763] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[   115.763] (II) No input driver specified, ignoring this device.
[   115.763] (II) This device may have been added with another device file.
[   115.763] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[   115.763] (II) No input driver specified, ignoring this device.
[   115.763] (II) This device may have been added with another device file.
[   115.764] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event1)
[   115.764] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   115.764] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[   115.764] (**) PixArt USB Optical Mouse: always reports core events
[   115.764] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event1"
[   115.764] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[   115.764] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[   115.764] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[   115.764] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[   115.764] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[   115.764] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[   115.764] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[   115.764] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   115.764] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   115.764] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input14/event1"
[   115.764] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 11)
[   115.764] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[   115.765] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[   115.765] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[   115.765] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[   115.765] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[   115.765] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[   115.765] (II) No input driver specified, ignoring this device.
[   115.765] (II) This device may have been added with another device file.
[   115.766] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   115.766] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   115.766] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   115.766] (**) AT Translated Set 2 keyboard: always reports core events
[   115.766] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   115.766] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   115.766] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   115.766] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   115.766] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   115.766] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   115.766] (**) Option "xkb_rules" "evdev"
[   115.766] (**) Option "xkb_model" "pc105"
[   115.766] (**) Option "xkb_layout" "fr"
[   115.766] (**) Option "xkb_variant" "latin9"
[   115.767] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[   115.767] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[   115.767] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[   115.767] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[   115.767] (II) LoadModule: "synaptics"
[   115.767] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   115.806] (II) Module synaptics: vendor="X.Org Foundation"
[   115.806] 	compiled for 1.12.4, module version = 1.6.2
[   115.806] 	Module class: X.Org XInput Driver
[   115.806] 	ABI class: X.Org XInput driver, version 16.0
[   115.806] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[   115.806] (**) ETPS/2 Elantech Touchpad: always reports core events
[   115.806] (**) Option "Device" "/dev/input/event8"
[   115.852] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[   115.852] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 900
[   115.852] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 500
[   115.852] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[   115.852] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[   115.852] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[   115.852] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[   115.852] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   115.852] (**) ETPS/2 Elantech Touchpad: always reports core events
[   115.860] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[   115.860] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[   115.860] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[   115.860] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[   115.860] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.194
[   115.860] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[   115.860] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[   115.860] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[   115.860] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[   115.860] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   115.861] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[   115.861] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[   115.861] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   115.861] (II) No input driver specified, ignoring this device.
[   115.861] (II) This device may have been added with another device file.
[   115.862] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
[   115.862] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[   115.862] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[   115.862] (**) ACPI Virtual Keyboard Device: always reports core events
[   115.862] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
[   115.862] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[   115.862] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[   115.862] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[   115.862] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[   115.862] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
[   115.862] (**) Option "xkb_rules" "evdev"
[   115.862] (**) Option "xkb_model" "pc105"
[   115.862] (**) Option "xkb_layout" "fr"
[   115.862] (**) Option "xkb_variant" "latin9"
[   115.869] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   119.743] (II) fglrx(0): EDID vendor "SEC", prod id 12869
[   119.743] (II) fglrx(0): Printing DDC gathered Modelines:
[   119.743] (II) fglrx(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   119.750] (II) fglrx(0): Cannot get EDID information for CRT1
[   124.199] (II) fglrx(0): EDID vendor "SEC", prod id 12869
[   124.199] (II) fglrx(0): Printing DDC gathered Modelines:
[   124.199] (II) fglrx(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   124.207] (II) fglrx(0): Cannot get EDID information for CRT1
[   126.996] (II) fglrx(0): EDID vendor "SEC", prod id 12869
[   126.996] (II) fglrx(0): Printing DDC gathered Modelines:
[   126.996] (II) fglrx(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   127.004] (II) fglrx(0): Cannot get EDID information for CRT1
[  1246.015] (II) fglrx(0): EDID vendor "SEC", prod id 12869
[  1246.015] (II) fglrx(0): Printing DDC gathered Modelines:
[  1246.015] (II) fglrx(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[  1246.023] (II) fglrx(0): Cannot get EDID information for CRT1
#18

Car xorg.conf peut aussi être découpé en plusieurs morceaux, de façon modulaire, ça peut simplifier l’administration.

Puisque tu as les drivers proprios (fglrx), j’imagine qu’il y a des outils de configuration livrés avec.
Sinon, tu auras peut-être plus de succès avec les drivers libres.

En creusant la question sur le web,
-> superuser.com/questions/395927/g … big-enough

Il semblerait que fglrx demande des résolutions aux comptes ronds pour qu’il les accepte. Revoir donc l’option Virtual de ton xorg.conf en conséquence.

#19

ahh ba merci ZBF !! c’est très pertinent le lien que tu fournis !!

ça marche enfin !!

kusdy@webmail:~$ xrandr Screen 0: minimum 320 x 200, current 2266 x 1440, maximum 3200 x 3200 LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 60.0*+ 1360x768 60.0 1280x768 60.0 1280x720 60.0 1024x768 60.0 1024x600 60.0 800x600 60.0 800x480 60.0 640x480 60.0 DFP1 disconnected (normal left inverted right x axis y axis) CRT1 connected 900x1440+1366+0 left (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 1280x1024 75.0 60.0 1280x960 60.0 1280x800 60.0 1152x864 75.0 59.9 1280x768 60.0 1280x720 60.0 1024x768 75.0 70.1 60.0 1024x600 75.0 70.1 60.0 800x600 72.2 75.0 60.3 56.2 800x480 72.2 75.0 60.3 56.2 640x480 75.0 72.8 67.0 59.9 kusdy@webmail:~$

tout d’abord j’ai juste mis le virtual screen dans une sous section

[code]Section "Screen"
Identifier "Default Screen"
Device "Default Video Card"
DefaultDepth 24
SubSection "Display"
Virtual 3200 3200
EndSubSection
EndSection

Section "Device"
Identifier "Default Video Card"
Driver “fglrx” # or this for ATI proprietary driver
# others I don’t known
EndSection
[/code]

la cléf du probleme, comme le montre le lien pertinent, c’est bien le ratio que dois avoir le virtual screen.
ensuite j’ai pas plus d’info la dessus mais en faisant 16002 16002 donc je garde un ratio 1:1, ba ca fonctionne.

ensuite j’ai fais mon test avec arandr, activer le moniteur lcd fais mes modifications ( rotation, resolution ) et ca fonctionne !

maintenant, faut que je configure moi meme , a la main mon fichier xorg.conf pour que ca le fasse a chaque redémarrage de mon user kusdy !!
dans le cas ou je voudrai que ca soit comme ça pour chaque utilisateur, si j’ai bien compris, il faut editer/creer le fichier xorg qui se trouve dans /usr/share/X11 ???

si j’ai des difficultés je reviendrai ici vous en faire part…

pour ça cest un autre truc donc je ferme le topic …

merci encore !!

#20

:wink:

Pour ajouter la config de xrandr pour tous tes utilisateurs, je pense que tu peux ajouter un fichier contenant ta commande dans [mono]/etc/X11/Xsession.d/[/mono]

Il faut éviter autant que se peut de toucher directement aux fichiers dans /usr/ (hormis /usr/local/)