Debian etch ppc, imac G3 ,et carte ati rage pro 128 mo

Support Debian
#1

Bonjour toutes tous

Je tiens tout d’abord a vous remercier de m’accueillir dans votre forum.

Suite a un coup de cœur, j’ai acquis un vieux iMac g3 (350 MHz de processeur et 320 de ram )
Une machine que je trouve non seulement superbe esthétiquement, mais extrêmement bien pensé.
J’ai voulu lui redonner une « seconde vie » et en cherchant dans les forums j’ai trouvé qu’il y avait la possibilité de Linux ppc.

Je lui aie donc installé un Linux etch (40 r5 ppc), et là vraiment cela l’a ressuscité.
Tout s’est bien passé, tout le hardware a été reconnu et tout les logicielles fonctionnent d’une façon impeccable. . ; les mises à jour se font… l’iMac est une vraie horloge suisse :mrgreen: :.
D’ailleurs, je conseille vivement a tous ceux qui voudraient, tout comme moi redonner vie a une telle machine de lui installer cet os.
Depuis j’ai eu l’occasion d’acquérir deux autres iMac, plus récent et plus puissant, pour pouvoir les retaper et leur permettre de faire de petits heureux.
J’ai donc réinstaller Debian etch sur l’un et l’autre, tout s’installe pas de problème arrive le reboote finale et là le système démarre et tout va bien jusqu’au moment ou il faut mettre le nom d’utilisateur et le mot de passe et là tout devient extrêmement lent :frowning: … La souris ne répond plus… et pour finalement démarrer il met heure et ensuite impossible de faire quoi que ce soit :cry: .
Les deux iMac ont 640 et 380 de ram l’un a un processeur de 700Mhz et l’autre un processeur de 500Mhz.

Puisque ce système tournait parfaitement avec un iMac ayant moins de puissance… Je ne comprends pas.
J’ai cherché et je pense que le problème doit venir de la carte graphique, les 2 pc plus récent ont une carte graphique ATI rage pro 128 Mo et je pense que le Debian etch ppc n’arrive pas a gérer ce type de carte avec le pilote ati générique.

Une âme charitable pourrait elle m’aider en m’indiquant, de façons simple s.v.p., comment me sortir de ce mauvais pas ?
J’ai cherché partout, mais n’ait pas trouvé de solution

Amicalement

#2

Effectivement, il est possible suivant ce que tu décris que la carte graphique soit en cause. Une manière simple mais radicale serait d’installer Debian Lenny qui est plus récente que Etch et gèrerait le matériel plus récent.

#3

Bonsoir

Tout d’abord merci de t’etre soucier de mon probleme , comme tu me l’as indiquer j’ai donc telecharger et installer Debian Lenny ppc , pour l’installation pas de probleme , jusqu’au reboot final et là … ecran noir .
Je sait plus quoi faire …il y avait un cd live de " kaella" qui lui semblait avoir comme base Debain et qui faisait tourner ces deux ordis.

Le probleme avec ce live cd c’est qu’il est impossible de l’installer et en plus il est completement depassé .
Si quelq’un avait une solution a mon “probleme” cela me ferait bien plaisir , une solution qui soit expliquer simplement svp :slightly_smiling: .

Des solutions doivent exister c’est sur , je ne doit pas etre la premiere ,ni la seul victime de ce probleme de pilote de carte ATI

Amicalement

#4

Bon, alors dans ce cas, lorsque tu arrives à l’écran noir, fait [Ctrl] + [Alt] + [F1] pour te logguer en console.

Mets une clef USB, tu devrais avoir un message te disant si ta clef est en sda1, sdb1, sdc1, etc.

Monte ta clef (il faut être en root] :

Remplacer X par la bonne lettre.

Ensuite mets-y quelques fichiers de la manière suivante :

Ensuite, démonte ta clef :

Tu va te retrouver avec 3 fichiers textes sur ta clef. Met-nous leur contenu ici.

#5

Bonjour toutes tous

AnatomicJC , je n’ai pu répondre avant car je n’en ait pas eut le temps, hors là c’est , enfin , le week -end je peut de nouveau me consacrer a mon installation de Linux sur Imac G3 .
Suite de mes galères informatiques , j’ai changé le disque dur sur l’imac 700 mhz , sur lequel j’avais installer Debian Lenny , et je lui ait réinstaller Debian Etch ( car celui-ci démarrait même si il gelait et était inexploitable ) et effectivement rebelote il as de nouveau « gelé » .
Je m’en doutait mais c’était surtout , pour pouvoir récupérer les fichiers grâce a la méthode que tu m’as indiquer .
Je l’ai donc appliquer mais j’ai récupérer que 2 fichiers ? 
J’ai essayer plusieurs fois mais a chaque fois je n’ai récupérer que le fichier « lspci » et « Xorg.0.log » je les met donc , j’ai essayer de les mettre en fichier joint mais cela ne pase pas ( le fichier “Xorg” est volumineux ) .
fichier lspci:

0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea AGP 0000:00:10.0 Display controller: ATI Technologies Inc Rage 128 Pro Ultra TR 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea PCI 0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Pangea Mac I/O 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB 0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea Internal PCI 0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth/Pangea FireWire 0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM)
fichier Xorg.0.log :

[code]X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux debian 2.6.18-6-powerpc #1 Thu Oct 16 21:52:47 UTC 2008 ppc
Build Date: 01 June 2008
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Thu Jan 1 13:15:56 1970
(==) Using config file: “/etc/X11/xorg.conf”
(==) ServerLayout “Default Layout”
() |–>Screen “Default Screen” (0)
() | |–>Monitor “iMac”
() | |–>Device “ATI Technologies Inc Rage 128 Pro Ultra TR”
() |–>Input Device “Generic Keyboard”
() |–>Input Device “Configured Mouse”
(WW) The directory “/usr/X11R6/lib/X11/fonts/misc” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/X11R6/lib/X11/fonts/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/X11R6/lib/X11/fonts/100dpi/” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/X11R6/lib/X11/fonts/75dpi/” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/X11R6/lib/X11/fonts/Type1” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/X11R6/lib/X11/fonts/100dpi” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/X11R6/lib/X11/fonts/75dpi” does not exist.
Entry deleted from font path.
(WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to “/etc/X11/rgb”
(==) ModulePath set to “/usr/lib/xorg/modules”
(II) Open APM successful
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: “bitmap”
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: “pcidata”
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0027 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,5452 card 1002,5452 rev 00 class 03,80,00 hdr 00
(II) PCI: 10:0b:0: chip 106b,0028 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 10:17:0: chip 106b,0025 card 0000,0000 rev 00 class ff,00,00 hdr 00
(II) PCI: 10:18:0: chip 106b,0026 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:19:0: chip 106b,0026 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 20:0b:0: chip 106b,0029 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 20:0e:0: chip 106b,0030 card 106b,0030 rev 00 class 0c,00,10 hdr 00
(II) PCI: 20:0f:0: chip 106b,0024 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 16: bridge is at (16:11:0), (16,16,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 16 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 16 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 32: bridge is at (32:11:0), (32,32,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 32 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 32 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 32 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(–) PCI:*(0:16:0) ATI Technologies Inc Rage 128 Pro Ultra TR rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8, BIOS @ 0xf1000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]
[1] -1 0 0xf5000000 - 0xf5000fff (0x1000) MX[B]
[2] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]
[3] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]
[4] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]
[5] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[6] -1 0 0x90000000 - 0x90003fff (0x4000) MXB
[7] -1 0 0x94000000 - 0x97ffffff (0x4000000) MXB
[8] -1 0 0xf0000400 - 0xf00004ff (0x100) IXB
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]
[1] -1 0 0xf5000000 - 0xf5000fff (0x1000) MX[B]
[2] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]
[3] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]
[4] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]
[5] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[6] -1 0 0x90000000 - 0x90003fff (0x4000) MXB
[7] -1 0 0x94000000 - 0x97ffffff (0x4000000) MXB
[8] -1 0 0xf0000400 - 0xf00004ff (0x100) IXB
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]
[5] -1 0 0xf5000000 - 0xf5000fff (0x1000) MX[B]
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]
[8] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]
[9] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[10] -1 0 0x90000000 - 0x90003fff (0x4000) MXB
[11] -1 0 0x94000000 - 0x97ffffff (0x4000000) MXB
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0xf0000400 - 0xf00004ff (0x100) IXB
(II) LoadModule: “i2c”
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: “bitmap”
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: “ddc”
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module “drm”
(II) LoadModule: “drm”
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “freetype”
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “int10”
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: “vbe”
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: “ati”
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 6.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: “kbd”
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: “mouse”
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) ATI: ATI driver (version 6.6.3) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon AIW X800 VE (R420) JT (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 00:10:0
(II) ATI: Candidate “Device” section “ATI Technologies Inc Rage 128 Pro Ultra TR”.
(–) Assigning device section with no busID to primary device
(–) Chipset ATI Rage 128 Pro ULTRA TR (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]
[5] -1 0 0xf5000000 - 0xf5000fff (0x1000) MX[B]
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]
[8] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]
[9] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[10] -1 0 0x90000000 - 0x90003fff (0x4000) MXB
[11] -1 0 0x94000000 - 0x97ffffff (0x4000000) MXB
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0xf0000400 - 0xf00004ff (0x100) IXB
(II) Loading sub module “r128”
(II) LoadModule: “r128”
(II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(WW) INVALID IO ALLOCATION b: 0xf0000400 e: 0xf00004ff correctinga
(EE) end of block range 0xefffffff < begin 0xf0000000
(II) window:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]
[5] -1 0 0xf5000000 - 0xf5000fff (0x1000) MX[B]
[6] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]
[7] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]
[8] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]
[9] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[10] -1 0 0x90000000 - 0x90003fff (0x4000) MXB
[11] -1 0 0x94000000 - 0x97ffffff (0x4000000) MXB
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x00000400 - 0x000004ff (0x100) IXB
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] 0 0 0xf00003b0 - 0xf00003bb (0xc) IS[B]
[19] 0 0 0xf00003c0 - 0xf00003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 0 card 16 func 0
() R128(0): Depth 24, (–) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
() R128(0): Option “UseFBDev” “true”
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
() R128(0): Using framebuffer device
(II) Loading sub module “fbdevhw”
(II) LoadModule: “fbdevhw”
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.0.2
ABI class: X.Org Video Driver, version 1.0
(–) R128(0): Chipset: “ATI Rage 128 Pro ULTRA TR (AGP)” (ChipID = 0x5452)
(–) R128(0): Linear framebuffer at 0x94000000
(–) R128(0): MMIO registers at 0x90000000
(–) R128(0): BIOS at 0xf1000000
(–) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
() R128(0): Using external CRT for display
(II) Attempted to read BIOS 64KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): Primary Display == Type 3
(WW) R128(0): Can’t determine panel dimensions, and none specified.
Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=59 min=12500 max=25000; xclk=13000
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Reloading /usr/lib/xorg/modules/libddc.so
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module “i2c”
(II) LoadModule: “i2c”
(II) Reloading /usr/lib/xorg/modules/libi2c.so
(II) R128(0): I2C bus “DDC” initialized.
(II) R128(0): I2C device “DDC:ddc2” registered at address 0xA0.
(II) R128(0): I2C device “DDC:ddc2” removed.
(EE) R128(0): No DFP detected
(II) R128(0): iMac: Using hsync value of 60.00 kHz
(II) R128(0): iMac: Using vrefresh range of 75.00-117.00 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode “640x350” (hsync out of range)
(II) R128(0): Not using default mode “320x175” (hsync out of range)
(II) R128(0): Not using default mode “640x400” (hsync out of range)
(II) R128(0): Not using default mode “320x200” (hsync out of range)
(II) R128(0): Not using default mode “720x400” (hsync out of range)
(II) R128(0): Not using default mode “360x200” (hsync out of range)
(II) R128(0): Not using default mode “640x480” (hsync out of range)
(II) R128(0): Not using default mode “320x240” (hsync out of range)
(II) R128(0): Not using default mode “640x480” (hsync out of range)
(II) R128(0): Not using default mode “320x240” (hsync out of range)
(II) R128(0): Not using default mode “640x480” (hsync out of range)
(II) R128(0): Not using default mode “320x240” (hsync out of range)
(II) R128(0): Not using default mode “640x480” (hsync out of range)
(II) R128(0): Not using default mode “320x240” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “400x300” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “400x300” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “400x300” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “400x300” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “400x300” (hsync out of range)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(II) R128(0): Not using default mode “512x384” (hsync out of range)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(II) R128(0): Not using default mode “512x384” (hsync out of range)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(II) R128(0): Not using default mode “512x384” (hsync out of range)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(II) R128(0): Not using default mode “512x384” (hsync out of range)
(II) R128(0): Not using default mode “1152x864” (hsync out of range)
(II) R128(0): Not using default mode “576x432” (hsync out of range)
(II) R128(0): Not using default mode “1280x960” (vrefresh out of range)
(II) R128(0): Not using default mode “640x480” (vrefresh out of range)
(II) R128(0): Not using default mode “1280x960” (hsync out of range)
(II) R128(0): Not using default mode “640x480” (hsync out of range)
(II) R128(0): Not using default mode “1280x1024” (hsync out of range)
(II) R128(0): Not using default mode “640x512” (hsync out of range)
(II) R128(0): Not using default mode “1280x1024” (hsync out of range)
(II) R128(0): Not using default mode “640x512” (hsync out of range)
(II) R128(0): Not using default mode “1280x1024” (hsync out of range)
(II) R128(0): Not using default mode “640x512” (hsync out of range)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(II) R128(0): Not using default mode “1792x1344” (hsync out of range)
(II) R128(0): Not using default mode “896x672” (hsync out of range)
(II) R128(0): Not using default mode “1792x1344” (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode “896x672” (hsync out of range)
(II) R128(0): Not using default mode “1856x1392” (hsync out of range)
(II) R128(0): Not using default mode “928x696” (hsync out of range)
(II) R128(0): Not using default mode “1856x1392” (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode “928x696” (hsync out of range)
(II) R128(0): Not using default mode “1920x1440” (hsync out of range)
(II) R128(0): Not using default mode “960x720” (hsync out of range)
(II) R128(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode “960x720” (hsync out of range)
(II) R128(0): Not using default mode “832x624” (hsync out of range)
(II) R128(0): Not using default mode “416x312” (hsync out of range)
(II) R128(0): Not using default mode “1280x768” (hsync out of range)
(II) R128(0): Not using default mode “640x384” (hsync out of range)
(II) R128(0): Not using default mode “1280x800” (hsync out of range)
(II) R128(0): Not using default mode “640x400” (hsync out of range)
(II) R128(0): Not using default mode “1152x768” (hsync out of range)
(II) R128(0): Not using default mode “576x384” (hsync out of range)
(II) R128(0): Not using default mode “1152x864” (hsync out of range)
(II) R128(0): Not using default mode “576x432” (hsync out of range)
(II) R128(0): Not using default mode “1400x1050” (hsync out of range)
(II) R128(0): Not using default mode “700x525” (hsync out of range)
(II) R128(0): Not using default mode “1400x1050” (hsync out of range)
(II) R128(0): Not using default mode “700x525” (hsync out of range)
(II) R128(0): Not using default mode “1400x1050” (hsync out of range)
(II) R128(0): Not using default mode “700x525” (hsync out of range)
(II) R128(0): Not using default mode “1400x1050” (hsync out of range)
(II) R128(0): Not using default mode “700x525” (hsync out of range)
(II) R128(0): Not using default mode “1440x900” (hsync out of range)
(II) R128(0): Not using default mode “720x450” (hsync out of range)
(II) R128(0): Not using default mode “1600x1024” (hsync out of range)
(II) R128(0): Not using default mode “800x512” (hsync out of range)
(II) R128(0): Not using default mode “1680x1050” (hsync out of range)
(II) R128(0): Not using default mode “840x525” (hsync out of range)
(II) R128(0): Not using default mode “1920x1200” (hsync out of range)
(II) R128(0): Not using default mode “960x600” (hsync out of range)
(II) R128(0): Not using default mode “1920x1200” (hsync out of range)
(II) R128(0): Not using default mode “960x600” (hsync out of range)
(II) R128(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode “960x720” (hsync out of range)
(II) R128(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(II) R128(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(II) R128(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(II) R128(0): Not using mode “800x600” (no mode of this name)
(II) R128(0): Not using mode “640x480” (no mode of this name)
(–) R128(0): Virtual size is 1024x768 (pitch 1024)
() R128(0): Default mode “1024x768”: 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) R128(0): Modeline “1024x768” 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
() R128(0): Default mode “512x384”: 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) R128(0): Modeline “512x384” 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(++) R128(0): DPI set to (96, 96)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module “shadowfb”
(II) LoadModule: “shadowfb”
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(–) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0x90000000 - 0x90003fff (0x4000) MS[B]
[1] 0 0 0x94000000 - 0x97ffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]
[7] -1 0 0xf5000000 - 0xf5000fff (0x1000) MX[B]
[8] -1 0 0x80080000 - 0x80080fff (0x1000) MX[B]
[9] -1 0 0x80081000 - 0x80081fff (0x1000) MX[B]
[10] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B]
[11] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[12] -1 0 0x90000000 - 0x90003fff (0x4000) MXB
[13] -1 0 0x94000000 - 0x97ffffff (0x4000000) MXB
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MSB
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MSB
[17] 0 0 0xf0000400 - 0xf00004ff (0x100) IS[B]
[18] -1 0 0x00000400 - 0x000004ff (0x100) IXB
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] 0 0 0xf00003b0 - 0xf00003bb (0xc) ISB
[22] 0 0 0xf00003c0 - 0xf00003df (0x20) ISB
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(II) R128(0): [drm] loaded kernel module for “r128” driver
(II) R128(0): [drm] DRM interface version 1.2
(II) R128(0): [drm] created “r128” driver at busid “pci:0000:00:10.0”
(II) R128(0): [drm] added 8192 byte SAREA at 0xda103000
(II) R128(0): [drm] mapped SAREA 0xda103000 to 0x3001d000
(II) R128(0): [drm] framebuffer handle = 0x94000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): [agp] Mode 0x07000201 [AGP 0x106b/0x0027; Card 0x1002/0x5452]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0x00000000
(II) R128(0): [agp] Ring mapped at 0x3104a000
(II) R128(0): [agp] ring read ptr handle = 0x00101000
(II) R128(0): [agp] Ring read ptr mapped at 0x3001f000
(II) R128(0): [agp] vertex/indirect buffers handle = 0x00102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0x3114b000
(II) R128(0): [agp] AGP texture map handle = 0x00302000
(II) R128(0): [agp] AGP Texture map mapped at 0x3134b000
(II) R128(0): [drm] register handle = 0x90000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1024,3072)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 2302
(II) R128(0): Reserved back buffer from (0,770) to (1024,1538)
(II) R128(0): Reserved depth buffer from (0,1538) to (1024,2307)
(II) R128(0): Reserved depth span from (0,2306) offset 0x902000
(II) R128(0): Reserved 4096 kb for textures at offset 0xc00000
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 9228)
(II) R128(0): Largest offscreen area available: 1024 x 763
() Option “dpms”
() R128(0): DPMS enabled
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 48
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
() Option “CoreKeyboard”
() Generic Keyboard: Core Keyboard
() Option “Protocol” “standard”
() Generic Keyboard: Protocol: standard
() Option “AutoRepeat” “500 30”
() Option “XkbRules” “xorg”
() Generic Keyboard: XkbRules: “xorg”
() Option “XkbModel” “pc105”
() Generic Keyboard: XkbModel: “pc105”
() Option “XkbLayout” “fr”
() Generic Keyboard: XkbLayout: “fr”
() Option “XkbOptions” “lv3:lwin_switch”
() Generic Keyboard: XkbOptions: “lv3:lwin_switch”
() Option “CustomKeycodes” “off”
() Generic Keyboard: CustomKeycodes disabled
() Option “Protocol” “ImPS/2”
() Configured Mouse: Device: “/dev/input/mice”
() Configured Mouse: Protocol: “ImPS/2”
() Option “CorePointer”
() Configured Mouse: Core Pointer
() Option “Device” “/dev/input/mice”
() Option “Emulate3Buttons” “true”
() Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(II) XINPUT: Adding extended input device “Configured Mouse” (type: MOUSE)
(II) XINPUT: Adding extended input device “Generic Keyboard” (type: KEYBOARD)
xkb_keycodes { include “xfree86+aliases(azerty)” };
xkb_types { include “complete” };
xkb_compatibility { include “complete” };
xkb_symbols { include “pc(pc105)+fr+level3(lwin_switch)” };
xkb_geometry { include “pc(pc105)” };
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine…
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine…
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine…
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine…
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine…
(II) AIGLX: Suspending AIGLX clients for VT switch
[/code]
Merci du temps et de l’attention que vous accorder a mon « problème » :slightly_smiling:
Amicalement

#6

Bonsoir

Personne svp , pour un petit coup de pouce ?? .
je crois que le probleme viendrais du fait du pilote “ati” alors qu’il faudrait le pilote "r128"
je crois avoir compris cela en “lisant” une intervention sur un forum anglais , j’en suis pas sur parceque l’anglais et moi :smiling_imp: .

Mais bon je suis certain qu’il y a une solution, malgré tout .

#7

Bonjour,

J’ai moi-même cherché pour un Emac et une carte nvidia.
J’ai utilisé Parse-Edid

Car j’étais tombé sur ça

Avec comme aide supplémentaire ça, aller directement à la fin !

Et enfin combiner ça pour mon soucis perso… Aller à la fin encore !

En espérant que l’image sera :stuck_out_tongue:

Bonne suite,
:smt006

#8

[quote=“snick”]Bonsoir

Personne svp , pour un petit coup de pouce ?? .
je crois que le probleme viendrais du fait du pilote “ati” alors qu’il faudrait le pilote "r128"
je crois avoir compris cela en “lisant” une intervention sur un forum anglais , j’en suis pas sur parceque l’anglais et moi :smiling_imp: .

Mais bon je suis certain qu’il y a une solution, malgré tout .[/quote]

:~$ aptitude search xserver-xorg-video-r128 p xserver-xorg-video-r128 - X.Org X server -- ATI r128 display driver p xserver-xorg-video-r128-dbg - X.Org X server -- ATI r128 display driver :~$ apt-cache policy xserver-xorg-video-r128 xserver-xorg-video-r128: Installé : (aucun) Candidat : 6.8.0-1 Table de version : 6.8.0-2 0 98 http://ftp.fr.debian.org experimental/main Packages 6.8.0-1 0 980 http://ftp.fr.debian.org testing/main Packages 987 http://ftp.fr.debian.org sid/main Packages
avec un fichier sources.list au carré et le fichier preferences pour etch (voir rubrique T&A), tu devrais pouvoir trouver ton bonheur !

#9

Bonsoir tous

j’ai mis un peut de temps a vous répondre et je m’en excuse .

Tout d’abord AnatomicJC, XTOFE et HEROS60 merci de m’avoir consacrer un peut de votre temps et de m’avoir donner ces pistes que je vais explorer . Cela va prendre du temps mais je vous tiens au courant , et si cela fonctionne je “reviendrais” pour vous en faire part et expliquer ce qui auras fait que

En attendant je vous souhaite, a toutes et a tous, de très très bonnes fêtes et une année 2009 qui vous soit douce a vous ainsi qu’a vos proches

Amicalement