RE-bonjour.
@ Ricardo : A quoi peut-on voir qu’il y a des problèmes de RAM ?
J’ai tapé free -m dans un terminal, ça me donne ça :
debian:/home/user# free -m
total used free shared buffers cached
Mem: 1009 874 135 0 67 471
-/+ buffers/cache: 335 674
Swap: 2591 0 2591
@ Etcheberrizahar :
Voici ce que rapportent les fichiers suivants (il y a un bug de 11:12:48 à 11:12:58)
kern.log :
Apr 29 11:08:38 debian kernel: [ 3722.437715] wlan0: RX AssocResp from e0:a1:d7:12:f2:00 (capab=0x411 status=0 aid=1)
Apr 29 11:08:38 debian kernel: [ 3722.437722] wlan0: associated
Apr 29 11:12:48 debian kernel: [ 3971.989066] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Apr 29 11:12:48 debian kernel: [ 3971.989073] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Apr 29 11:12:48 debian kernel: [ 3971.989087] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
Apr 29 11:12:48 debian kernel: [ 3971.989089] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
Apr 29 11:12:48 debian kernel: [ 3971.989093] ata1.01: status: { DRDY }
Apr 29 11:12:53 debian kernel: [ 3977.029053] ata1: link is slow to respond, please be patient (ready=0)
Apr 29 11:12:58 debian kernel: [ 3982.013030] ata1: device not ready (errno=-16), forcing hardreset
Apr 29 11:12:58 debian kernel: [ 3982.013041] ata1: soft resetting link
Apr 29 11:12:58 debian kernel: [ 3982.225625] ata1.00: configured for UDMA/100
Apr 29 11:12:58 debian kernel: [ 3982.265336] ata1.01: configured for UDMA/33
Apr 29 11:12:58 debian kernel: [ 3982.272444] ata1: EH complete
syslog :
Apr 29 11:08:38 debian NetworkManager[1301]: <info> (wlan0): supplicant connection state: group handshake -> completed
Apr 29 11:12:48 debian kernel: [ 3971.989066] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Apr 29 11:12:48 debian kernel: [ 3971.989073] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Apr 29 11:12:48 debian kernel: [ 3971.989087] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
Apr 29 11:12:48 debian kernel: [ 3971.989089] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
Apr 29 11:12:48 debian kernel: [ 3971.989093] ata1.01: status: { DRDY }
Apr 29 11:12:53 debian kernel: [ 3977.029053] ata1: link is slow to respond, please be patient (ready=0)
Apr 29 11:12:58 debian kernel: [ 3982.013030] ata1: device not ready (errno=-16), forcing hardreset
Apr 29 11:12:58 debian kernel: [ 3982.013041] ata1: soft resetting link
Apr 29 11:12:58 debian kernel: [ 3982.225625] ata1.00: configured for UDMA/100
Apr 29 11:12:58 debian kernel: [ 3982.265336] ata1.01: configured for UDMA/33
Apr 29 11:12:58 debian kernel: [ 3982.272444] ata1: EH complete
message :
Apr 29 10:36:47 debian kernel: [ 1811.265476] ata1: EH complete
Apr 29 11:12:48 debian kernel: [ 3971.989073] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Apr 29 11:12:53 debian kernel: [ 3977.029053] ata1: link is slow to respond, please be patient (ready=0)
Apr 29 11:12:58 debian kernel: [ 3982.013030] ata1: device not ready (errno=-16), forcing hardreset
Apr 29 11:12:58 debian kernel: [ 3982.013041] ata1: soft resetting link
Apr 29 11:12:58 debian kernel: [ 3982.225625] ata1.00: configured for
et dmesg (fichier dans son intégralité) :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-43) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Mar 31 03:56:41 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 2f649000 - 3001b05e
[ 0.000000] ACPI: RSDP 000f7bb0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3ffd0000 00038 (v01 A M I OEMRSDT 07000627 MSFT 00000097)
[ 0.000000] ACPI: FACP 3ffd0200 00084 (v02 A M I OEMFACP 07000627 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3ffd0460 07AD4 (v01 A6JC0 A6JC0219 00000219 INTL 02002026)
[ 0.000000] ACPI: FACS 3ffde000 00040
[ 0.000000] ACPI: APIC 3ffd0390 0005C (v01 A M I OEMAPIC 07000627 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3ffd03f0 0003C (v01 A M I OEMMCFG 07000627 MSFT 00000097)
[ 0.000000] ACPI: BOOT 3ffd0430 00028 (v01 A M I OEMBOOT 07000627 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3ffde040 00046 (v01 A M I AMI_OEM 07000627 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[ 0.000000] #4 [002f649000 - 003001b05e] RAMDISK ==> [002f649000 - 003001b05e]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d3138] BRK ==> [00014cd000 - 00014d3138]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003ffd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffd0
[ 0.000000] On node 0 totalpages: 261983
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 280 pages used for memmap
[ 0.000000] HighMem zone: 35514 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u2097152
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259935
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/debian-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003ffd0)
[ 0.000000] Memory: 1023316k/1048384k available (2506k kernel code, 24152k reserved, 1326k data, 380k init, 143176k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272afb - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272afb (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.723 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.44 BogoMIPS (lpj=6650892)
[ 0.008022] Security Framework initialized
[ 0.008029] SELinux: Disabled at boot.
[ 0.008036] Mount-cache hash table entries: 512
[ 0.008169] Initializing cgroup subsys ns
[ 0.008174] Initializing cgroup subsys cpuacct
[ 0.008178] Initializing cgroup subsys devices
[ 0.008181] Initializing cgroup subsys freezer
[ 0.008184] Initializing cgroup subsys net_cls
[ 0.008208] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008211] CPU: L2 cache: 2048K
[ 0.008214] CPU: Physical Processor ID: 0
[ 0.008217] CPU: Processor Core ID: 0
[ 0.008221] mce: CPU supports 6 MCE banks
[ 0.008232] CPU0: Thermal monitoring enabled (TM2)
[ 0.008236] using mwait in idle threads.
[ 0.008242] Performance Events: no PMU driver, software events only.
[ 0.008248] Checking 'hlt' instruction... OK.
[ 0.025424] ACPI: Core revision 20090903
[ 0.036065] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079025] CPU0: Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 2048K
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.012000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164048] CPU1: Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
[ 0.164058] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168072] Brought up 2 CPUs
[ 0.168075] Total of 2 processors activated (6650.65 BogoMIPS).
[ 0.169004] CPU0 attaching sched-domain:
[ 0.169010] domain 0: span 0-1 level MC
[ 0.169013] groups: group c2003778 cpus 0 group c2203778 cpus 1
[ 0.169021] CPU1 attaching sched-domain:
[ 0.169023] domain 0: span 0-1 level MC
[ 0.169026] groups: group c2203778 cpus 1 group c2003778 cpus 0
[ 0.169099] devtmpfs: initialized
[ 0.169099] regulator: core version 0.5
[ 0.169099] NET: Registered protocol family 16
[ 0.169099] ACPI: bus type pci registered
[ 0.169099] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.169099] PCI: Not using MMCONFIG.
[ 0.169099] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.169099] PCI: Using configuration type 1 for base access
[ 0.169099] bio: create slab <bio-0> at 0
[ 0.169099] ACPI: EC: Look up EC in DSDT
[ 0.173546] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.186656] ACPI: Interpreter enabled
[ 0.186663] ACPI: (supports S0 S3 S4 S5)
[ 0.186691] ACPI: Using IOAPIC for interrupt routing
[ 0.186758] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.194708] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.194712] PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.194715] PCI: Using MMCONFIG for extended config space
[ 0.203015] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.203093] ACPI: Power Resource [GFAN] (off)
[ 0.203300] ACPI: No dock devices found.
[ 0.203452] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.203589] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.203593] pci 0000:00:01.0: PME# disabled
[ 0.203674] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff]
[ 0.203747] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.203753] pci 0000:00:1b.0: PME# disabled
[ 0.203856] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.203861] pci 0000:00:1c.0: PME# disabled
[ 0.203969] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.203974] pci 0000:00:1c.3: PME# disabled
[ 0.204045] pci 0000:00:1d.0: reg 20 io port: [0xec00-0xec1f]
[ 0.204109] pci 0000:00:1d.1: reg 20 io port: [0xe880-0xe89f]
[ 0.204173] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.204237] pci 0000:00:1d.3: reg 20 io port: [0xe480-0xe49f]
[ 0.204308] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebfbc00-0xfebfbfff]
[ 0.204387] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.204393] pci 0000:00:1d.7: PME# disabled
[ 0.204557] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.204573] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[ 0.204636] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.204644] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.204653] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.204661] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.204670] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.204749] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.204763] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.204778] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[ 0.204792] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff]
[ 0.204873] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.204946] pci 0000:00:01.0: bridge 32bit mmio: [0xf9f00000-0xfdffffff]
[ 0.204952] pci 0000:00:01.0: bridge 64bit mmio pref: [0xbdf00000-0xddefffff]
[ 0.205021] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.205047] pci 0000:02:00.0: reg 18 64bit mmio: [0xfe0ff000-0xfe0fffff]
[ 0.205074] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe0e0000-0xfe0effff]
[ 0.205172] pci 0000:02:00.0: supports D1 D2
[ 0.205175] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.205182] pci 0000:02:00.0: PME# disabled
[ 0.205228] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.205320] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
[ 0.205325] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe000000-0xfe0fffff]
[ 0.205469] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe1ff000-0xfe1fffff]
[ 0.205775] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.205788] pci 0000:03:00.0: PME# disabled
[ 0.205889] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.206034] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe100000-0xfe1fffff]
[ 0.206085] pci 0000:04:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.206121] pci 0000:04:01.0: supports D1 D2
[ 0.206124] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206129] pci 0000:04:01.0: PME# disabled
[ 0.206171] pci 0000:04:01.1: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
[ 0.206241] pci 0000:04:01.1: PME# supported from D0 D3hot D3cold
[ 0.206247] pci 0000:04:01.1: PME# disabled
[ 0.206288] pci 0000:04:01.2: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff]
[ 0.206358] pci 0000:04:01.2: supports D1 D2
[ 0.206360] pci 0000:04:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206366] pci 0000:04:01.2: PME# disabled
[ 0.206408] pci 0000:04:01.3: reg 10 32bit mmio: [0xfeaff000-0xfeaff0ff]
[ 0.206477] pci 0000:04:01.3: supports D1 D2
[ 0.206480] pci 0000:04:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206486] pci 0000:04:01.3: PME# disabled
[ 0.206554] pci 0000:00:1e.0: transparent bridge
[ 0.206559] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.206565] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe200000-0xfeafffff]
[ 0.206573] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xddf00000-0xdfefffff]
[ 0.206613] pci_bus 0000:00: on NUMA node 0
[ 0.206620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.206803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.206885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.207032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.207134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.219831] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 0.219986] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 12)
[ 0.220151] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
[ 0.220304] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12)
[ 0.220460] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.220614] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12)
[ 0.220766] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 12)
[ 0.220919] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[ 0.221044] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.221051] vgaarb: loaded
[ 0.221069] PCI: Using ACPI for IRQ routing
[ 0.221069] hpet clockevent registered
[ 0.221069] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.221069] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.221069] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.224019] Switching to clocksource tsc
[ 0.225562] pnp: PnP ACPI init
[ 0.225572] ACPI: bus type pnp registered
[ 0.228087] pnp: PnP ACPI: found 14 devices
[ 0.228090] ACPI: ACPI bus type pnp unregistered
[ 0.228095] PnPBIOS: Disabled by ACPI PNP
[ 0.228106] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.228117] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.228121] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.228125] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.228129] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.228134] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.228141] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.228145] system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.228152] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.228159] system 00:0b: ioport range 0x400-0x41f has been reserved
[ 0.228163] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.228167] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.228171] system 00:0b: iomem range 0xfec10000-0xfec17fff has been reserved
[ 0.228175] system 00:0b: iomem range 0xfec28000-0xfec2ffff has been reserved
[ 0.228182] system 00:0c: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.228189] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.228193] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.228197] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.228202] system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.262988] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.262991] pci 0000:00:01.0: IO window: disabled
[ 0.262996] pci 0000:00:01.0: MEM window: 0xf9f00000-0xfdffffff
[ 0.263001] pci 0000:00:01.0: PREFETCH window: 0x000000bdf00000-0x000000ddefffff
[ 0.263007] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.263011] pci 0000:00:1c.0: IO window: 0xc000-0xcfff
[ 0.263018] pci 0000:00:1c.0: MEM window: 0xfe000000-0xfe0fffff
[ 0.263023] pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff
[ 0.263032] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.263036] pci 0000:00:1c.3: IO window: 0x1000-0x1fff
[ 0.263043] pci 0000:00:1c.3: MEM window: 0xfe100000-0xfe1fffff
[ 0.263048] pci 0000:00:1c.3: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.263063] pci 0000:04:01.0: CardBus bridge, secondary bus 0000:05
[ 0.263067] pci 0000:04:01.0: IO window: 0x00d000-0x00d0ff
[ 0.263072] pci 0000:04:01.0: IO window: 0x00d400-0x00d4ff
[ 0.263078] pci 0000:04:01.0: PREFETCH window: 0x44000000-0x47ffffff
[ 0.263084] pci 0000:04:01.0: MEM window: 0x48000000-0x4bffffff
[ 0.263090] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.263095] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.263101] pci 0000:00:1e.0: MEM window: 0xfe200000-0xfeafffff
[ 0.263107] pci 0000:00:1e.0: PREFETCH window: 0x000000ddf00000-0x000000dfefffff
[ 0.263124] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.263129] pci 0000:00:01.0: setting latency timer to 64
[ 0.263139] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.263145] pci 0000:00:1c.0: setting latency timer to 64
[ 0.263155] pci 0000:00:1c.3: enabling device (0106 -> 0107)
[ 0.263161] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.263166] pci 0000:00:1c.3: setting latency timer to 64
[ 0.263174] pci 0000:00:1e.0: setting latency timer to 64
[ 0.263186] pci 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.263194] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.263197] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.263201] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xfdffffff]
[ 0.263205] pci_bus 0000:01: resource 2 pref mem [0xbdf00000-0xddefffff]
[ 0.263208] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.263212] pci_bus 0000:02: resource 1 mem: [0xfe000000-0xfe0fffff]
[ 0.263215] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x401fffff]
[ 0.263219] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.263222] pci_bus 0000:03: resource 1 mem: [0xfe100000-0xfe1fffff]
[ 0.263226] pci_bus 0000:03: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.263230] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.263233] pci_bus 0000:04: resource 1 mem: [0xfe200000-0xfeafffff]
[ 0.263236] pci_bus 0000:04: resource 2 pref mem [0xddf00000-0xdfefffff]
[ 0.263240] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.263243] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.263247] pci_bus 0000:05: resource 0 io: [0xd000-0xd0ff]
[ 0.263250] pci_bus 0000:05: resource 1 io: [0xd400-0xd4ff]
[ 0.263253] pci_bus 0000:05: resource 2 pref mem [0x44000000-0x47ffffff]
[ 0.263257] pci_bus 0000:05: resource 3 mem: [0x48000000-0x4bffffff]
[ 0.263290] NET: Registered protocol family 2
[ 0.263383] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.263706] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.264456] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.264835] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.264838] TCP reno registered
[ 0.264939] NET: Registered protocol family 1
[ 0.264983] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.265003] pci 0000:00:1d.0: PCI INT A disabled
[ 0.265011] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.265029] pci 0000:00:1d.1: PCI INT B disabled
[ 0.265038] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.265057] pci 0000:00:1d.2: PCI INT C disabled
[ 0.265066] pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 0.265085] pci 0000:00:1d.3: PCI INT D disabled
[ 0.265097] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.265123] pci 0000:00:1d.7: PCI INT A disabled
[ 0.265140] pci 0000:01:00.0: Boot video device
[ 0.265207] Unpacking initramfs...
[ 0.619359] Freeing initrd memory: 10056k freed
[ 0.625455] Simple Boot Flag at 0x52 set to 0x1
[ 0.625835] audit: initializing netlink socket (disabled)
[ 0.625851] type=2000 audit(1335686796.623:1): initialized
[ 0.631246] highmem bounce pool size: 64 pages
[ 0.631252] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.633065] VFS: Disk quotas dquot_6.5.2
[ 0.633134] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.633223] msgmni has been set to 1739
[ 0.633485] alg: No test for stdrng (krng)
[ 0.633549] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.633553] io scheduler noop registered
[ 0.633556] io scheduler anticipatory registered
[ 0.633558] io scheduler deadline registered
[ 0.633603] io scheduler cfq registered (default)
[ 0.633736] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.633744] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.633869] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.633879] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.634027] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.634037] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.634246] isapnp: Scanning for PnP cards...
[ 0.987804] isapnp: No Plug & Play device found
[ 0.989336] Linux agpgart interface v0.103
[ 0.989496] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.989987] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.992076] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.993334] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.993342] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.993346] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.993350] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.993357] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.993433] mice: PS/2 mouse device common for all mice
[ 0.993494] rtc_cmos 00:03: RTC can wake from S4
[ 0.993532] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.993561] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.993577] cpuidle: using governor ladder
[ 0.993579] cpuidle: using governor menu
[ 0.993584] No iBFT detected.
[ 0.993987] TCP cubic registered
[ 0.994166] NET: Registered protocol family 10
[ 0.995038] Mobile IPv6
[ 0.995041] NET: Registered protocol family 17
[ 0.995059] Using IPI No-Shortcut mode
[ 0.995130] PM: Resume from disk failed.
[ 0.995142] registered taskstats version 1
[ 0.995636] rtc_cmos 00:03: setting system clock to 2012-04-29 08:06:37 UTC (1335686797)
[ 0.995691] Initalizing network drop monitor service
[ 0.995730] Freeing unused kernel memory: 380k freed
[ 0.995980] Write protecting the kernel text: 2508k
[ 0.996009] Write protecting the kernel read-only data: 920k
[ 1.020477] udev[59]: starting version 164
[ 1.022233] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.144346] usbcore: registered new interface driver usbfs
[ 1.144382] usbcore: registered new interface driver hub
[ 1.144845] usbcore: registered new device driver usb
[ 1.164562] SCSI subsystem initialized
[ 1.164789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.167396] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.167416] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.167421] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.167442] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.167472] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.167486] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.171368] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.171554] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[ 1.174041] fan PNP0C0B:00: registered as cooling_device0
[ 1.174050] ACPI: Fan [FN00] (off)
[ 1.179224] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.179234] ACPI: Thermal Zone [THRM] (32 C)
[ 1.186014] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.186038] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.186100] r8169 0000:02:00.0: setting latency timer to 64
[ 1.186180] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[ 1.186934] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf7d92000, 00:18:f3:4a:d2:14, XID 18000000 IRQ 27
[ 1.192015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.192045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.192048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.192052] usb usb1: Product: EHCI Host Controller
[ 1.192054] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.192057] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.192157] usb usb1: configuration #1 chosen from 1 choice
[ 1.192199] hub 1-0:1.0: USB hub found
[ 1.192209] hub 1-0:1.0: 8 ports detected
[ 1.225468] libata version 3.00 loaded.
[ 1.225746] firewire_ohci 0000:04:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.232953] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.233028] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.233047] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.233051] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.233066] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.233097] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
[ 1.233143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.233147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.233150] usb usb2: Product: UHCI Host Controller
[ 1.233153] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.233156] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.233295] usb usb2: configuration #1 chosen from 1 choice
[ 1.233377] hub 2-0:1.0: USB hub found
[ 1.233386] hub 2-0:1.0: 2 ports detected
[ 1.233448] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.233457] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.233461] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.233476] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.233513] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[ 1.233553] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.233556] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.233560] usb usb3: Product: UHCI Host Controller
[ 1.233562] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.233565] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.233683] usb usb3: configuration #1 chosen from 1 choice
[ 1.233760] hub 3-0:1.0: USB hub found
[ 1.233771] hub 3-0:1.0: 2 ports detected
[ 1.233829] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.233838] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.233842] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.233850] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.233884] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 1.233920] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.233924] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.233927] usb usb4: Product: UHCI Host Controller
[ 1.233930] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.233933] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.234047] usb usb4: configuration #1 chosen from 1 choice
[ 1.234124] hub 4-0:1.0: USB hub found
[ 1.234132] hub 4-0:1.0: 2 ports detected
[ 1.234187] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 1.234196] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.234200] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.234209] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.234242] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000e480
[ 1.234279] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.234282] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.234285] usb usb5: Product: UHCI Host Controller
[ 1.234288] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.234291] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.234329] sdhci: Secure Digital Host Controller Interface driver
[ 1.234331] sdhci: Copyright(c) Pierre Ossman
[ 1.234570] usb usb5: configuration #1 chosen from 1 choice
[ 1.234648] hub 5-0:1.0: USB hub found
[ 1.234657] hub 5-0:1.0: 2 ports detected
[ 1.236051] ata_piix 0000:00:1f.1: version 2.13
[ 1.236064] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.236106] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.236198] scsi0 : ata_piix
[ 1.236295] scsi1 : ata_piix
[ 1.238002] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.238007] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.238240] ata2: port disabled. ignoring.
[ 1.305009] firewire_ohci: Added fw-ohci device 0000:04:01.1, OHCI version 1.0
[ 1.305067] sdhci-pci 0000:04:01.2: SDHCI controller found [1180:0822] (rev 17)
[ 1.305090] sdhci-pci 0000:04:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.307141] Registered led device: mmc0::
[ 1.308180] mmc0: SDHCI controller on PCI [0000:04:01.2] using PIO
[ 1.425616] ata1.00: ATA-6: HTS541010G9AT00, MBZOA60A, max UDMA/100
[ 1.425620] ata1.00: 195371568 sectors, multi 16: LBA48
[ 1.425665] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, AS05, max UDMA/33
[ 1.441516] ata1.00: configured for UDMA/100
[ 1.481261] ata1.01: configured for UDMA/33
[ 1.488525] scsi 0:0:0:0: Direct-Access ATA HTS541010G9AT00 MBZO PQ: 0 ANSI: 5
[ 1.498640] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L632D AS05 PQ: 0 ANSI: 5
[ 1.508023] usb 1-7: new high speed USB device using ehci_hcd and address 2
[ 1.533294] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[ 1.556212] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.556216] Uniform CD-ROM driver Revision: 3.20
[ 1.556256] sd 0:0:0:0: [sda] Write Protect is off
[ 1.556259] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.556289] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.556465] sda:
[ 1.556551] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.579015] sda1 sda2
[ 1.579286] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.585855] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.585891] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.637684] usb 1-7: New USB device found, idVendor=174f, idProduct=a311
[ 1.637689] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.637693] usb 1-7: Product: USB2.0
[ 1.637696] usb 1-7: Manufacturer: Syntek
[ 1.637793] usb 1-7: configuration #1 chosen from 1 choice
[ 1.808095] firewire_core: created device fw0: GUID 00e018000368a583, S400
[ 1.846740] device-mapper: uevent: version 1.0.3
[ 1.846888] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 67.406318] PM: Starting manual resume from disk
[ 67.406323] PM: Resume from partition 254:2
[ 67.406325] PM: Checking hibernation image.
[ 67.406584] PM: Error -22 checking image file
[ 67.406587] PM: Resume from disk failed.
[ 67.474982] kjournald starting. Commit interval 5 seconds
[ 67.474995] EXT3-fs: mounted filesystem with ordered data mode.
[ 70.337843] udev[409]: starting version 164
[ 70.887091] ACPI: AC Adapter [AC0] (on-line)
[ 70.921816] asus_laptop: Asus Laptop Support version 0.42
[ 70.925363] asus_laptop: A6JC model detected
[ 70.927142] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 70.927878] input: Asus Laptop extra buttons as /devices/virtual/input/input2
[ 70.928741] ACPI: Lid Switch [LID]
[ 70.928812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 70.928818] ACPI: Power Button [PWRB]
[ 70.928878] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 70.928887] ACPI: Sleep Button [SLPB]
[ 70.928951] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 70.928956] ACPI: Power Button [PWRF]
[ 70.932643] Registered led device: asus::mail
[ 71.095306] ACPI Warning: Incorrect checksum in table [SSDT] - 83, should be 09 (20090903/tbutils-314)
[ 71.095317] ACPI: SSDT 3ffd7f40 00CC3 (v01 AMI CPU1PM 00000001 INTL 20051117)
[ 71.098294] Marking TSC unstable due to TSC halts in idle
[ 71.099868] processor LNXCPU:00: registered as cooling_device1
[ 71.100173] ACPI Warning: Incorrect checksum in table [SSDT] - D6, should be 9C (20090903/tbutils-314)
[ 71.100180] ACPI: SSDT 3ffd8c10 004A4 (v01 AMI CPU2PM 00000001 INTL 20051117)
[ 71.100999] Switching to clocksource hpet
[ 71.105813] processor LNXCPU:01: registered as cooling_device2
[ 71.144939] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 71.220423] ACPI: Battery Slot [BAT0] (battery present)
[ 71.880264] cfg80211: Using static regulatory domain info
[ 71.880268] cfg80211: Regulatory domain: US
[ 71.880271] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 71.880275] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 71.880278] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 71.880282] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 71.880285] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 71.880289] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 71.880293] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 71.880592] cfg80211: Calling CRDA for country: US
[ 71.889405] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[ 71.889469] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 71.889756] intel_rng: FWH not detected
[ 71.961691] Linux video capture interface: v2.00
[ 72.004868] yenta_cardbus 0000:04:01.0: CardBus bridge found [1043:1237]
[ 72.134113] yenta_cardbus 0000:04:01.0: ISA IRQ mask 0x0cb8, PCI irq 17
[ 72.134118] yenta_cardbus 0000:04:01.0: Socket status: 30000006
[ 72.134123] pci_bus 0000:04: Raising subordinate bus# of parent bus (#04) from #05 to #08
[ 72.134133] yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[ 72.134138] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean.
[ 72.134407] yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff
[ 72.134411] yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
[ 72.160301] stkwebcam: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 72.160321] usbcore: registered new interface driver stkwebcam
[ 72.276470] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0
[ 72.313099] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 72.478374] [drm] Initialized drm 1.1.0 20060810
[ 73.183619] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 73.183623] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 73.183704] iwl3945 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 73.183719] iwl3945 0000:03:00.0: setting latency timer to 64
[ 73.251118] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 73.251123] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 73.251260] iwl3945 0000:03:00.0: irq 28 for MSI/MSI-X
[ 73.377408] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 73.379035] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 73.379502] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 73.379854] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 73.380602] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 73.414471] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 73.414479] nouveau 0000:01:00.0: setting latency timer to 64
[ 73.416718] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[ 73.417080] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046700a3)
[ 73.417414] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 73.417419] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 73.417422] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 73.452134] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 73.498975] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 73.498981] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 73.498985] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.41
[ 73.498989] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[ 73.498992] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 73.498996] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 73.499001] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 73.499005] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[ 73.499009] [drm] nouveau 0000:01:00.0: 1: 0x00000130: type 0x30 idx 1 tag 0xff
[ 73.499012] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 73.499016] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[ 73.499020] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
[ 73.499024] [drm] nouveau 0000:01:00.0: 5: 0x00000340: type 0x40 idx 3 tag 0xff
[ 73.499028] [drm] nouveau 0000:01:00.0: 6: 0x00001431: type 0x31 idx 4 tag 0x07
[ 73.499031] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03005323 00000004
[ 73.499036] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010300 00000028
[ 73.499039] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04026312 00000000
[ 73.499043] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020333f1 0080c070
[ 73.499052] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE118
[ 73.499109] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE447
[ 73.568239] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9E5
[ 73.568277] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB60
[ 73.576165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEDB9
[ 73.591159] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 73.591206] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 73.591396] [TTM] Zone kernel: Available graphics memory: 445522 kiB.
[ 73.591399] [TTM] Zone highmem: Available graphics memory: 517110 kiB.
[ 73.591412] [drm] nouveau 0000:01:00.0: 128 MiB VRAM
[ 73.593457] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 73.594271] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 73.595439] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 73.595448] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 73.595455] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 73.654140] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 73.752828] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 73.752878] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 73.752909] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 73.754416] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 73.754421] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 73.754425] [drm] nouveau 0000:01:00.0: 0xD259: Parsing digital output script table
[ 73.822711] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 74.020042] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[ 74.020052] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[ 74.020058] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 74.101296] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x49000, bo ef813600
[ 74.112860] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 74.112864] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[ 74.112868] [drm] nouveau 0000:01:00.0: 0xD2BA: Parsing digital output script table
[ 74.261053] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
[ 74.261060] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[ 74.261065] [drm] nouveau 0000:01:00.0: 0xD24A: Parsing digital output script table
[ 74.261079] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 74.262942] Console: switching to colour frame buffer device 160x50
[ 74.264718] fb0: nouveaufb frame buffer device
[ 74.264720] registered panic notifier
[ 74.264727] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 75.433778] EXT3 FS on dm-1, internal journal
[ 75.787863] loop: module loaded
[ 76.404834] Adding 2654200k swap on /dev/mapper/debian-swap_1. Priority:-1 extents:1 across:2654200k
[ 76.923603] dd: sending ioctl 801c6d02 to a partition!
[ 77.156462] kjournald starting. Commit interval 5 seconds
[ 77.161389] EXT3 FS on dm-3, internal journal
[ 77.161408] EXT3-fs: mounted filesystem with ordered data mode.
[ 80.088610] fuse init (API version 7.13)
[ 80.802409] RPC: Registered udp transport module.
[ 80.802413] RPC: Registered tcp transport module.
[ 80.802415] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 81.214052] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 81.574370] svc: failed to register lockdv1 RPC service (errno 97).
[ 81.575877] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 81.634251] NFSD: starting 90-second grace period
[ 84.583760] r8169 0000:02:00.0: eth0: link down
[ 84.583989] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 84.586590] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 84.694178] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 84.768995] Registered led device: iwl-phy0::radio
[ 84.769075] Registered led device: iwl-phy0::assoc
[ 84.769108] Registered led device: iwl-phy0::RX
[ 84.769149] Registered led device: iwl-phy0::TX
[ 84.785784] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 89.574334] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 89.575491] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 91.867904] Bluetooth: Core ver 2.15
[ 91.867982] NET: Registered protocol family 31
[ 91.867985] Bluetooth: HCI device and connection manager initialized
[ 91.867988] Bluetooth: HCI socket layer initialized
[ 92.020913] Bluetooth: L2CAP ver 2.14
[ 92.020916] Bluetooth: L2CAP socket layer initialized
[ 92.062991] Bluetooth: RFCOMM TTY layer initialized
[ 92.062996] Bluetooth: RFCOMM socket layer initialized
[ 92.062998] Bluetooth: RFCOMM ver 1.11
[ 92.174831] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 92.174835] Bluetooth: BNEP filters: protocol multicast
[ 92.248738] Bridge firewalling registered
[ 92.337726] Bluetooth: SCO (Voice Link) ver 0.6
[ 92.337729] Bluetooth: SCO socket layer initialized
Est-ce que ça peut aider à comprendre?
Merci de vos réponses!
bimboum
