Bonsoir,
J’ai enfin réussi a booter Linux Voyage sur mon Alix 3d3.
Deja, ce qui parait évident pour les geek linuxien ne l’est pas pour un débutant… bon après c’est sur on se sent débile…
Bref, la honte ne tuant pas, j’explique pour ceux qui vont suivre le même parcours que moi: (merci de me corriger si je dis des bêtises)
J’ai commencer par télécharger l’archive sur le site de linux Voyage.
Ensuite l’extraire et c’est la que la blague commence… 
En effet étant sous Ubuntu j’ai cliqué sur l’archive et fait une extraction…bon…sauf que j’ai eu des erreurs mais j’ai pas fait gaffe la première fois… 
des fichiers ne se sont pas extrait correctement car je n’avais pas les droit… en effet il faut avoir des droits de super-utilisateur pour décompresser correctement cette archive:
Lancer une console, puis
$sudo -i
rentrer son mot de passe
et la on tombe en root:
#
Maintenant extraire l’archive avec tar dans un répertoire ‘voyage’ par exemple.
Ensuite suivre le howto du site Linux Voyage (dchost99 a décrit une instal à partir d’un live cd… c’est presque pareil. au fait dchost99 la commande pour lancer le script est ‘voyage.update’)
Bon évidement avant il faut formater la CF. je vous conseil de le faire comme décrit dans mon premier post comme cela vous pourrez laisser la partition 1 en read only, et utiliser la partition 2 pour mettre vos programme (enfin c’est ce que je veux faire 
)
bon voila le résultat pour le premier boot:
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz root=LABEL=ROOT_FS console=ttyS0,38400n8
[Linux-bzImage, setup=0x3400, size=0x1c93a0]
initrd /initrd.img
[Linux-initrd @ 0xf46f000, 0x330667 bytes]
[ 0.000000] Linux version 3.0.0-voyage (3.0.0-3) (root@punknix-stable) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Tue Sep 13 21:54:11 HKT 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000000f7b0000 - 000000000f7b3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000f7b3000 - 000000000f7c0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0xf7b0 max_arch_pfn = 0x100000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000f7b0000
[ 0.000000] RAMDISK: 0f46f000 - 0f7a0000
[ 0.000000] ACPI: RSDP 000f59b0 00014 (v00 AMDGX3)
[ 0.000000] ACPI: RSDT 0f7b3040 00028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0f7b30c0 00074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20110413/tbfadt-610)
[ 0.000000] ACPI: DSDT 0f7b3180 01DFC (v01 AMDGX3 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0f7b0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 247MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0f7b0000
[ 0.000000] low ram: 0 - 0f7b0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000f7b0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0000f7b0
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at f7c0000 (gap: f7c0000:f0830000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @cec00000 s22656 r0 d22400 u4194304
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62798
[ 0.000000] Kernel command line: root=LABEL=ROOT_FS console=ttyS0,38400n8
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 243224k/253632k available (2708k kernel code, 9952k reserved, 1094k data, 344k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xcffb0000 - 0xff7fe000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
[ 0.000000] .init : 0xc13b7000 - 0xc140d000 ( 344 kB)
[ 0.000000] .data : 0xc12a53cc - 0xc13b6cc0 (1094 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12a53cc (2708 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.013 MHz processor.
[ 0.003008] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.02 BogoMIPS (lpj=498013)
[ 0.005012] pid_max: default: 32768 minimum: 301
[ 0.006360] Mount-cache hash table entries: 512
[ 0.008681] SMP alternatives: switching to UP code
[ 0.016225] Freeing SMP alternatives: 16k freed
[ 0.017026] ACPI: Core revision 20110413
[ 0.024242] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.026267] weird, boot CPU (#0) not listed by the BIOS.
[ 0.027010] SMP motherboard not detected.
[ 0.028009] Local APIC not detected. Using dummy APIC emulation.
[ 0.029007] SMP disabled
[ 0.030008] Performance Events: no PMU driver, software events only.
[ 0.038024] Brought up 1 CPUs
[ 0.039013] Total of 1 processors activated (996.02 BogoMIPS).
[ 0.041423] devtmpfs: initialized
[ 0.043434] PM: Registering ACPI NVS region at f7b0000 (12288 bytes)
[ 0.045190] NET: Registered protocol family 16
[ 0.048477] ACPI: bus type pci registered
[ 0.051163] PCI: PCI BIOS revision 2.10 entry at 0xfafc0, last bus=0
[ 0.052035] PCI: Using configuration type 1 for base access
[ 0.068336] bio: create slab <bio-0> at 0
[ 0.088668] ACPI: Interpreter enabled
[ 0.089006] ACPI: (supports S0 S5)
[ 0.092012] ACPI: Using PIC for interrupt routing
[ 0.112180] ACPI: No dock devices found.
[ 0.113010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.114300] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.115746] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.116012] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xac17]
[ 0.117018] pci_root PNP0A03:00: host bridge window [io 0xac20-0xffff]
[ 0.118007] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.119036] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 0.120007] pci_root PNP0A03:00: host bridge window [mem 0x0f7c0000-0xfebfffff]
[ 0.136836] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18)
[ 0.147140] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.152655] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.157335] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
[ 0.164451] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.169935] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[ 0.170022] vgaarb: loaded
[ 0.171022] vgaarb: bridge control possible 0000:00:01.1
[ 0.173263] SCSI subsystem initialized
[ 0.175305] PCI: Using ACPI for IRQ routing
[ 0.176086] pci 0000:00:01.0: no compatible bridge window for [io 0xac1c-0xac1f]
[ 0.178966] Switching to clocksource pit
[ 0.179497] pnp: PnP ACPI init
[ 0.180726] ACPI: bus type pnp registered
[ 0.182586] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.183514] system 00:00: [mem 0x0f7b0000-0x0f7bffff] could not be reserved
[ 0.184418] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.185274] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.187241] system 00:00: [mem 0x00100000-0x0f7affff] could not be reserved
[ 0.189137] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.192277] pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io 0x0000-0x001f]
[ 0.193885] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.199682] pnp: PnP ACPI: found 8 devices
[ 0.201005] ACPI: ACPI bus type pnp unregistered
[ 0.256490] Switching to clocksource acpi_pm
[ 0.257432] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
[ 0.275724] Switched to NOHz mode on CPU #0
[ 0.288416] pci 0000:00:0f.0: BAR 3: set to [io 0x1000-0x101f] (PCI address [0x1000-0x101f])
[ 0.314417] NET: Registered protocol family 2
[ 0.327989] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.350120] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.371480] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.390992] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.410072] TCP reno registered
[ 0.419513] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.437059] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.456697] NET: Registered protocol family 1
[ 0.470298] RPC: Registered named UNIX socket transport module.
[ 0.488115] RPC: Registered udp transport module.
[ 0.502298] RPC: Registered tcp transport module.
[ 0.516452] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.547427] Trying to unpack rootfs image as initramfs...
[ 1.264554] Freeing initrd memory: 3268k freed
[ 1.283440] microcode: CPU0: family 5 not supported
[ 1.308188] msgmni has been set to 481
[ 1.320779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.343088] io scheduler noop registered
[ 1.354892] io scheduler deadline registered
[ 1.367795] io scheduler cfq registered (default)
[ 1.383951] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.413832] ACPI: AC Adapter [AC] (on-line)
[ 1.427479] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.449741] ACPI: Power Button [PWRF]
[ 1.704277] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ÿ[ 1.988357] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.037123] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.056759] Linux agpgart interface v0.103
[ 2.081482] brd: module loaded
[ 2.090743] Uniform Multi-Platform E-IDE driver
[ 2.104729] ide-gd driver 1.18
[ 2.115338] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.017357] Refined TSC clocksource calibration: 498.050 MHz.
[ 3.034650] Switching to clocksource tsc
[ 3.046542] i8042: Can't read CTR while initializing i8042
[ 3.063041] i8042: probe of i8042 failed with error -5
[ 3.079679] mousedev: PS/2 mouse device common for all mice
[ 3.096913] cpuidle: using governor ladder
[ 3.109277] cpuidle: using governor menu
[ 3.123578] TCP cubic registered
[ 3.133323] NET: Registered protocol family 17
[ 3.146736] Registering the dns_resolver key type
[ 3.160984] Using IPI No-Shortcut mode
[ 3.175570] Freeing unused kernel memory: 344k freed
Loading, please wait...
[ 3.247306] udev[925]: starting version 164
[ 3.631492] amd74xx 0000:00:0f.2: UDMA100 controller
[ 3.646557] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 3.962058] amd74xx 0000:00:0f.2: IDE controller (0x1022:0x209a rev 0x01)
[ 4.005171] usbcore: registered new interface driver usbfs
[ 4.174507] usbcore: registered new interface driver hub
[ 4.201543] amd74xx 0000:00:0f.2: IDE port disabled
[ 4.358681] amd74xx 0000:00:0f.2: not 100% native mode: will probe irqs later
[ 4.384564] usbcore: registered new device driver usb
[ 4.528628] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.597944] ide0: BM-DMA at 0xff00-0xff07
[ 5.029215] hda: SanDisk SDCFH-004G, CFA DISK drive
[ 5.659384] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 5.686137] hda: UDMA/33 mode selected
[ 5.697713] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.719194] hda: max request size: 128KiB
[ 5.731244] hda: 7835184 sectors (4011 MB) w/1KiB Cache, CHS=7773/16/63
[ 5.756803] hda: hda1 hda2 hda3
[ 5.770074] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 5.790294] via-rhine 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.825824] via-rhine 0000:00:09.0: eth0: VIA Rhine III (Management Adapter) at 0xeffff000, 00:0d:b9:24:94:24, IRQ 11
[ 5.858364] via-rhine 0000:00:09.0: eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1
[ 5.892876] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 10
[ 5.919195] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 5.936482] ehci_hcd 0000:00:0f.5: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 5.964337] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 5.980216] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 6.023162] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xefffd000
[ 6.046060] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 6.064637] hub 1-0:1.0: USB hub found
[ 6.078622] hub 1-0:1.0: 4 ports detected
[ 6.122580] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.171277] ohci_hcd 0000:00:0f.4: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 6.199344] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 6.215088] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 6.237341] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffe000
[ 6.316896] hub 2-0:1.0: USB hub found
[ 6.328205] hub 2-0:1.0: 4 ports detected
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 7.168859] udev[1094]: starting version 164
.
Synthesizing the initial hotplug events...[ 7.597781] AMD Geode RNG detected
[ 7.654138] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 7.687156] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 8.056311] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 8.189793] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.330902] Geode LX AES 0000:00:01.2: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 8.520102] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
done.
Waiting for /dev to be fully populated...[ 8.746122] geode-aes: GEODE AES engine enabled.
[ 8.802526] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x623f]
[ 8.923198] cs5535audio 0000:00:0f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 9.062082] cs5535-mfgpt cs5535-mfgpt: 4 MFGPT timers available
[ 9.269319] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff]
[ 9.479537] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
done.
Activating swap...done.
Cleaning up ifupdown....
[ 10.896183] cs5535-mfgpt cs5535-mfgpt: registered timer 0
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
done.
Mounting local filesystems... [31mfailed. [39;49m
Activating swapfile swap...done.
Cleaning up temporary files....
Setting kernel variables ...done.
Setting up resolvconf...voyage-sync: Start tmpfs...
voyage-sync: Copying /ro to /rw
voyage-sync: Setting up tmpfs for changed files...
voyage-sync: tmpfs: mount back /lib/init/rw/var/log to /var/log
voyage-sync: tmpfs: mount back /lib/init/rw/var/tmp to /var/tmp
voyage-sync: Start tmpfs completed
done.
Setting up networking....
Configuring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
[ 13.131214] via-rhine 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Listening on LPF/eth0/00:0d:b9:24:94:24
Sending on LPF/eth0/00:0d:b9:24:94:24
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPOFFER from 192.168.1.1
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.13 -- renewal in 42905 seconds.
done.
Starting portmap daemon...[ 17.498757] NET: Registered protocol family 10
.
Cleaning up temporary files....
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting portmap daemon...Already running..
Starting watchdog keepalive daemon: wd_keepalive.
[ 17.925707] wd_keepalive (1671): /proc/1671/oom_adj is deprecated, please use /proc/1671/oom_score_adj instead.
Starting system log daemon....
Starting DNS forwarder and DHCP server: dnsmasq.
Starting kernel log daemon....
Starting OpenBSD Secure Shell server: sshd.
Starting periodic command scheduler: cron.
nocatsplash daemon disabled - read /etc/default/nocatsplash.
Remounting / as read-write ... Done.
First-time installation
Re-generating host ssh keys ... Stopping watchdog keepalive daemon....
Starting watchdog daemon....
Done.
Removing /etc/nologin ... Done.
Remounting / as read-only ... Done.
/etc/init.d/voyage-util: 13: cannot create /sys/class/leds/alix:1/trigger: Directory nonexistent
startpar: service(s) returned failure: voyage-util ... [31mfailed! [39;49m
Debian GNU/Linux 6.0 voyage ttyS0
voyage login: root
Password:
Linux voyage 3.0.0-voyage #1 SMP PREEMPT Tue Sep 13 21:54:11 HKT 2011 i586
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
__ __
\ \/ /___ __ __ ___ ___ ___ Useful Commands:
\ // _ \\ \/ /,-_ |/ _ |/ -_) remountrw - mount disk as read-write
\/ \___/ \ / \___,\_ |\___| remountro - mount disk as read-only
_/_/ _'_| remove.docs - remove all docs and manpages
{ V o y a g e } - L i n u x
< http://linux.voyage.hk > Version: 0.8 (Build Date 20110919)
root@voyage:~# remount rw
-bash: remount: command not found
root@voyage:~# remount
-bash: remount: command not found
root@voyage:~#
Bon oui la commande correct pour mettre la partition en rw est dans le splash screen…
Bon j’ai quelques fail:
[color=#FF0000][ 3.046542] i8042: Can’t read CTR while initializing i8042
[ 3.063041] i8042: probe of i8042 failed with error -5
Mounting local filesystems… [31mfailed. [39;49m
/etc/init.d/voyage-util: 13: cannot create /sys/class/leds/alix:1/trigger: Directory nonexistent
startpar: service(s) returned failure: voyage-util … [31mfailed! [39;49m
[/color]
qu’en pensez vous? 
Ensuite une chose m’intrigue, une fois loggé en root, lorsque je tape la commande dir, je n’ai aucun directory … est-ce du au failed sur le montage du local filesytems??
Ou sont donc tous les dossiers de ‘bases’?
Demain je continu avec les commande de dchost99 pour installer un serveur X et un gestionnaire de fenetre…
A+
[quote=“dchost99”]Hello,
voici les commandes, merci de les corriger si besoin:
fdisk -l
et vérifie bien le disque de destination
voyage-update
une fois “voyage” installé,
umount /dev/la_carte_CF
et démarrer l’Alix depuis la CF et vérifier la connexion réseau avec ifconfig
et ajouter source debian officielle
echo "deb http://ftp.fr.debian.org/debian squeeze main" >> /etc/apt/source.list
apt-get update
apt-get install xserver-xorg-video-geode xserver-xorg-input-all xinit xterm nano xfonts-base alsa-base alsa-utils matchbox-window-manager python-wxgtk2.8 bzip2
wget http://opencpn.org/sites/default/files/users/taifun/opencpn_2.5.0-2_i386.deb
dpkg -i opencpn_2.5.0-2_i386.deb
dans .xinitrc ajouter
matchbox-window-manager &
/usr/local/bin/opencpn[/quote]
(je vais encore persévérer ce soir…)
… mais je n’en suis pas encore la
