Bonjour,
Alors c’est pas un problème très très grave pour moi car la rapidité du démarrage n’est pas une de mes priorités mais j’ai eu un peu peur
Premier démarrage : Ca bloque sur le bios et quand je demande de rentrer dans “choisir la maniere de booter” ca a bloqué sur un jolie “please wait” pendant 15min.
J’éteint l’ordinateur et le rallume
La je passe le bios et le grub mais je suis bloque sur les erreurs ata5 qui dise qu’il ne trouve pas le device
Je re-eteint et je rallume et la ca marche, ca a juste été très lent (je vous joins le dmesg)
[ 0.354916] pci 0000:00:1c.5: setting latency timer to 64
[ 0.354925] pci 0000:00:1e.0: setting latency timer to 64
[ 0.354930] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.354932] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.354935] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.354938] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.354940] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
[ 0.354943] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xdfffffff]
[ 0.354946] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff]
[ 0.354949] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.354951] pci_bus 0000:01: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.354954] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.354957] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.354960] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.354963] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.354966] pci_bus 0000:0e: resource 0 [io 0x4000-0x4fff]
[ 0.354968] pci_bus 0000:0e: resource 1 [mem 0xc0800000-0xc0cfffff]
[ 0.354971] pci_bus 0000:0e: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.354974] pci_bus 0000:14: resource 0 [io 0x5000-0x5fff]
[ 0.354977] pci_bus 0000:14: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.354980] pci_bus 0000:14: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.354982] pci_bus 0000:20: resource 0 [io 0x6000-0x6fff]
[ 0.354985] pci_bus 0000:20: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.354988] pci_bus 0000:20: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.354991] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
[ 0.354994] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
[ 0.354996] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.354999] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.355002] pci_bus 0000:26: resource 8 [mem 0x000e0000-0x000e3fff]
[ 0.355004] pci_bus 0000:26: resource 9 [mem 0xc0000000-0xdfffffff]
[ 0.355007] pci_bus 0000:26: resource 10 [mem 0xf0000000-0xfebfffff]
[ 0.355069] NET: Registered protocol family 2
[ 0.355137] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.355377] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.355794] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.356080] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.356083] TCP reno registered
[ 0.356089] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.356101] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.356224] NET: Registered protocol family 1
[ 0.356255] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.356276] pci 0000:00:1a.0: PCI INT A disabled
[ 0.356296] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.356316] pci 0000:00:1a.1: PCI INT B disabled
[ 0.356325] pci 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.356345] pci 0000:00:1a.2: PCI INT C disabled
[ 0.356356] pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.356389] pci 0000:00:1a.7: PCI INT C disabled
[ 0.356416] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.356436] pci 0000:00:1d.0: PCI INT A disabled
[ 0.356445] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.356465] pci 0000:00:1d.1: PCI INT B disabled
[ 0.356474] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.356494] pci 0000:00:1d.2: PCI INT C disabled
[ 0.356504] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.356524] pci 0000:00:1d.7: PCI INT A disabled
[ 0.356543] pci 0000:01:00.0: Boot video device
[ 0.356560] PCI: CLS 64 bytes, default 64
[ 0.356615] Unpacking initramfs...
[ 0.670940] Freeing initrd memory: 10756k freed
[ 0.676032] Simple Boot Flag at 0x36 set to 0x1
[ 0.676529] audit: initializing netlink socket (disabled)
[ 0.676542] type=2000 audit(1344076897.672:1): initialized
[ 0.703296] highmem bounce pool size: 64 pages
[ 0.703302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.716170] VFS: Disk quotas dquot_6.5.2
[ 0.716211] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.716289] msgmni has been set to 1686
[ 0.716464] alg: No test for stdrng (krng)
[ 0.716496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.716500] io scheduler noop registered
[ 0.716502] io scheduler deadline registered
[ 0.716517] io scheduler cfq registered (default)
[ 0.716616] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.716652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.716711] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.716767] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.716851] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.716906] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.716989] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.717045] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.717126] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.717182] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.717292] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.717320] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.717322] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.717556] acpiphp: Slot [1] registered
[ 0.717704] intel_idle: does not run on family 6 model 23
[ 0.717733] ERST: Table is not found!
[ 0.717735] GHES: HEST is not enabled!
[ 0.717749] isapnp: Scanning for PnP cards...
[ 1.071859] isapnp: No Plug & Play device found
[ 1.071955] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.080375] Linux agpgart interface v0.103
[ 1.080729] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.116652] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.116658] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.116805] mousedev: PS/2 mouse device common for all mice
[ 1.120147] rtc_cmos 00:05: RTC can wake from S4
[ 1.120279] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.120312] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.120323] cpuidle: using governor ladder
[ 1.120325] cpuidle: using governor menu
[ 1.120540] TCP cubic registered
[ 1.120582] NET: Registered protocol family 10
[ 1.121095] Mobile IPv6
[ 1.121098] NET: Registered protocol family 17
[ 1.121102] Registering the dns_resolver key type
[ 1.121123] Using IPI No-Shortcut mode
[ 1.121269] PM: Hibernation image not present or could not be loaded.
[ 1.121279] registered taskstats version 1
[ 1.128190] rtc_cmos 00:05: setting system clock to 2012-08-04 10:41:38 UTC (1344076898)
[ 1.128262] Initializing network drop monitor service
[ 1.128369] Freeing unused kernel memory: 412k freed
[ 1.128517] Write protecting the kernel text: 2840k
[ 1.128555] Write protecting the kernel read-only data: 1088k
[ 1.128557] NX-protecting the kernel data: 3304k
[ 1.141415] udevd[49]: starting version 175
[ 1.154457] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.202354] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.202389] r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.202473] r8169 0000:0e:00.0: setting latency timer to 64
[ 1.202680] r8169 0000:0e:00.0: irq 45 for MSI/MSI-X
[ 1.203220] r8169 0000:0e:00.0: eth0: RTL8102e at 0xf8206000, 00:23:5a:f8:be:18, XID 04c00000 IRQ 45
[ 1.203856] usbcore: registered new interface driver usbfs
[ 1.203882] usbcore: registered new interface driver hub
[ 1.219183] usbcore: registered new device driver usb
[ 1.219656] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.219688] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.219711] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.219715] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.219741] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.219773] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.220720] SCSI subsystem initialized
[ 1.223660] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.223942] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf2504800
[ 1.232246] libata version 3.00 loaded.
[ 1.239917] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.239949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.239952] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.239955] usb usb1: Product: EHCI Host Controller
[ 1.239958] usb usb1: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[ 1.239960] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.241403] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.241597] hub 1-0:1.0: USB hub found
[ 1.241603] hub 1-0:1.0: 6 ports detected
[ 1.241719] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.241744] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.241748] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.241759] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.241794] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.245693] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.260439] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2504c00
[ 1.276177] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.276377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.276381] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.276384] usb usb2: Product: EHCI Host Controller
[ 1.276386] usb usb2: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[ 1.276388] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.276696] hub 2-0:1.0: USB hub found
[ 1.276704] hub 2-0:1.0: 6 ports detected
[ 1.276809] ahci 0000:00:1f.2: version 3.0
[ 1.276824] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.276889] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 1.276984] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.276988] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
[ 1.276994] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.278170] scsi0 : ahci
[ 1.278297] scsi1 : ahci
[ 1.278376] scsi2 : ahci
[ 1.278452] scsi3 : ahci
[ 1.278529] scsi4 : ahci
[ 1.278611] scsi5 : ahci
[ 1.278684] ata1: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504100 irq 46
[ 1.278689] ata2: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504180 irq 46
[ 1.278692] ata3: DUMMY
[ 1.278693] ata4: DUMMY
[ 1.278697] ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 46
[ 1.278700] ata6: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504380 irq 46
[ 1.278756] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.278767] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.278772] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.278785] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.278833] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.278879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.278882] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.278884] usb usb3: Product: UHCI Host Controller
[ 1.278887] usb usb3: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.278889] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.279040] hub 3-0:1.0: USB hub found
[ 1.279046] hub 3-0:1.0: 2 ports detected
[ 1.279138] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.279149] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.279152] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.279164] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.279206] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.279243] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.279247] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.279249] usb usb4: Product: UHCI Host Controller
[ 1.279251] usb usb4: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.279254] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.279374] hub 4-0:1.0: USB hub found
[ 1.279378] hub 4-0:1.0: 2 ports detected
[ 1.279464] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.279473] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.279477] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.279487] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.279519] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 1.279557] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.279560] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.279563] usb usb5: Product: UHCI Host Controller
[ 1.279565] usb usb5: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.279567] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.279687] hub 5-0:1.0: USB hub found
[ 1.279691] hub 5-0:1.0: 2 ports detected
[ 1.279778] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.279787] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.279790] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.279799] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.279829] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 1.279866] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.279870] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.279872] usb usb6: Product: UHCI Host Controller
[ 1.279874] usb usb6: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.279877] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.279991] hub 6-0:1.0: USB hub found
[ 1.279995] hub 6-0:1.0: 2 ports detected
[ 1.280107] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.280117] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.280120] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.280129] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.280161] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 1.280197] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.280201] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280203] usb usb7: Product: UHCI Host Controller
[ 1.280205] usb usb7: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.280208] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.280333] hub 7-0:1.0: USB hub found
[ 1.280337] hub 7-0:1.0: 2 ports detected
[ 1.280420] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.280429] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.280433] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.280442] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.280482] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 1.280519] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.280522] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280525] usb usb8: Product: UHCI Host Controller
[ 1.280527] usb usb8: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.280529] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.280649] hub 8-0:1.0: USB hub found
[ 1.280655] hub 8-0:1.0: 2 ports detected
[ 1.552034] usb 1-6: new high-speed USB device number 2 using ehci_hcd
[ 1.600062] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.600087] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.676018] Refined TSC clocksource calibration: 1995.224 MHz.
[ 1.676023] Switching to clocksource tsc
[ 1.688499] usb 1-6: New USB device found, idVendor=05ca, idProduct=1804
[ 1.688502] usb 1-6: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 1.688505] usb 1-6: Manufacturer: Ricoh co. Ltd.
[ 1.772024] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.772046] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.772990] ata2.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
[ 1.772993] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.774094] ata2.00: configured for UDMA/133
[ 1.774223] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
[ 1.785749] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TO01, max UDMA/100
[ 1.798875] ata5.00: configured for UDMA/100
[ 1.801569] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TO01 PQ: 0 ANSI: 5
[ 1.808153] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.808208] sd 1:0:0:0: [sda] Write Protect is off
[ 1.808211] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.808234] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.815466] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.815470] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.815615] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.848937] sda: sda1 sda2 sda3 < sda5 >
[ 1.849329] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.320901] device-mapper: uevent: version 1.0.3
[ 2.320979] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.404117] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.404121] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.903481] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 3.903491] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 267146
[ 3.903559] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 264402
[ 3.903576] EXT4-fs (sda1): 2 orphan inodes deleted
[ 3.903578] EXT4-fs (sda1): recovery complete
[ 4.054503] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.327836] udevd[295]: starting version 175
[ 6.345361] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 6.345411] ACPI: Lid Switch [LID0]
[ 6.345471] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.345476] ACPI: Power Button [PWRB]
[ 6.345536] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.345540] ACPI: Power Button [PWRF]
[ 6.346686] ACPI: Requesting acpi_cpufreq
[ 6.348685] Monitor-Mwait will be used to enter C-1 state
[ 6.348815] acpi device:04: registered as cooling_device0
[ 6.348947] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 6.348955] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.351328] Monitor-Mwait will be used to enter C-2 state
[ 6.351342] Marking TSC unstable due to TSC halts in idle
[ 6.351353] ACPI: acpi_idle registered with cpuidle
[ 6.352350] Switching to clocksource hpet
[ 6.396247] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6
[ 6.396314] ata5.00: irq_stat 0x40000001
[ 6.396373] ata5: SError: { HostInt 10B8B }
[ 6.396433] sr 4:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[ 6.396443] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 6.396445] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 6.396565] ata5.00: status: { DRDY ERR }
[ 6.396627] ata5: hard resetting link
[ 6.491066] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.523728] iTCO_vendor_support: vendor-support=0
[ 6.644711] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.644823] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 6.646866] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.722427] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.722495] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 6.722531] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.811066] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 6.811156] input: Toshiba input device as /devices/virtual/input/input6
[ 6.813708] Registered led device: toshiba::illumination
[ 6.828054] ACPI: AC Adapter [ACAD] (on-line)
[ 6.896066] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.946649] cfg80211: Calling CRDA to update world regulatory domain
[ 7.012350] ACPI: Battery Slot [BAT1] (battery present)
[ 7.014858] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 7.018590] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.018676] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.018850] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 7.018854] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.018860] ACPI: resource 0000:00:1f.3 [io 0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f]
[ 7.018863] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.018942] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 7.018975] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 7.112177] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 7.112308] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 7.146843] Linux media interface: v0.10
[ 7.181801] [drm] Initialized drm 1.1.0 20060810
[ 7.234589] rtl8192se 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 7.234599] rtl8192se 0000:14:00.0: setting latency timer to 64
[ 7.247599] rtl8192se: rtl8192ce: FW Power Save off (module option)
[ 7.247749] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[ 7.247750] Loading firmware rtlwifi/rtl8192sefw.bin
[ 7.345185] [drm] radeon kernel modesetting enabled.
[ 7.345286] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 7.345291] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 7.345302] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.345309] radeon 0000:01:00.0: setting latency timer to 64
[ 7.345570] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x1179:0xFF80).
[ 7.345611] [drm] register mmio base: 0xF2100000
[ 7.345613] [drm] register mmio size: 65536
[ 7.345887] ATOM BIOS: BR32658.001
[ 7.345915] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 7.345919] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 7.346595] [drm] Detected VRAM RAM=512M, BAR=256M
[ 7.346598] [drm] RAM width 64bits DDR
[ 7.346677] [TTM] Zone kernel: Available graphics memory: 432076 kiB.
[ 7.346680] [TTM] Zone highmem: Available graphics memory: 2055764 kiB.
[ 7.346683] [TTM] Initializing pool allocator.
[ 7.346708] [drm] radeon: 512M of VRAM memory ready
[ 7.346710] [drm] radeon: 512M of GTT memory ready.
[ 7.346728] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.346730] [drm] Driver supports precise vblank timestamp query.
[ 7.346790] radeon 0000:01:00.0: irq 49 for MSI/MSI-X
[ 7.346798] radeon 0000:01:00.0: radeon: using MSI.
[ 7.346835] [drm] radeon: irq initialized.
[ 7.346840] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.347801] [drm] Loading RV710 Microcode
[ 7.492247] Linux video capture interface: v2.00
[ 7.666446] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1804)
[ 7.668397] input: UVC Camera (05ca:1804) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input11
[ 7.668503] usbcore: registered new interface driver uvcvideo
[ 7.668505] USB Video Class driver (1.1.1)
[ 7.721780] cfg80211: World regulatory domain updated:
[ 7.721785] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.721788] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.721791] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.721795] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.721798] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.721801] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.963113] cfg80211: Calling CRDA for country: EC
[ 7.964709] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 7.964802] radeon 0000:01:00.0: WB enabled
[ 7.970150] cfg80211: Regulatory domain changed to country: EC
[ 7.970154] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.970157] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7.970160] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[ 7.970164] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[ 7.970167] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[ 7.995261] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 8.018962] [drm] ring test succeeded in 1 usecs
[ 8.019138] [drm] radeon: ib pool ready.
[ 8.019212] [drm] ib test succeeded in 0 usecs
[ 8.020989] [drm] Radeon Display Connectors
[ 8.020992] [drm] Connector 0:
[ 8.020993] [drm] LVDS
[ 8.020996] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[ 8.020998] [drm] Encoders:
[ 8.021000] [drm] LCD1: INTERNAL_UNIPHY2
[ 8.021002] [drm] Connector 1:
[ 8.021003] [drm] VGA
[ 8.021005] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[ 8.021007] [drm] Encoders:
[ 8.021009] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.021011] [drm] Connector 2:
[ 8.021012] [drm] HDMI-A
[ 8.021014] [drm] HPD2
[ 8.021016] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 8.021018] [drm] Encoders:
[ 8.021020] [drm] DFP2: INTERNAL_UNIPHY
[ 8.021021] [drm] Connector 3:
[ 8.021023] [drm] DisplayPort
[ 8.021024] [drm] HPD3
[ 8.021027] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 8.021029] [drm] Encoders:
[ 8.021030] [drm] DFP1: INTERNAL_UNIPHY
[ 8.021066] [drm] radeon: power management initialized
[ 8.113308] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000
[ 8.113317] psmouse serio1: synaptics: Toshiba Satellite L500 detected, limiting rate to 40pps.
[ 8.243623] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 9.024393] [drm] fb mappable at 0xD0142000
[ 9.024397] [drm] vram apper at 0xD0000000
[ 9.024400] [drm] size 4325376
[ 9.024403] [drm] fb depth is 24
[ 9.024406] [drm] pitch is 5632
[ 9.024555] fbcon: radeondrmfb (fb0) is primary device
[ 9.880088] Console: switching to colour frame buffer device 170x48
[ 9.887777] fb0: radeondrmfb frame buffer device
[ 9.887779] drm: registered panic notifier
[ 9.887802] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 11.896070] ata5.00: qc timeout (cmd 0xa1)
[ 11.896084] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 11.896089] ata5.00: revalidation failed (errno=-5)
[ 11.896159] ata5: hard resetting link
[ 12.388091] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.414619] ata5.00: configured for UDMA/100
[ 12.415369] ata5: EH complete
[ 13.306849] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 13.512426] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.605093] loop: module loaded
[ 44.896091] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x880800 action 0x6 frozen
[ 44.896195] ata5: SError: { HostInt 10B8B LinkSeq }
[ 44.896259] sr 4:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 44.896280] ata5.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 44.896282] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x44 (timeout)
[ 44.896456] ata5.00: status: { DRDY }
[ 44.896510] ata5: hard resetting link
[ 54.928049] ata5: softreset failed (device not ready)
[ 54.928126] ata5: hard resetting link
[ 64.932080] ata5: softreset failed (1st FIS failed)
[ 64.932149] ata5: hard resetting link
[ 99.932069] ata5: softreset failed (1st FIS failed)
[ 99.932141] ata5: limiting SATA link speed to 1.5 Gbps
[ 99.932146] ata5: hard resetting link
[ 100.424106] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 100.450979] ata5.00: configured for UDMA/100
[ 100.451456] ata5: EH complete
[ 117.391665] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 117.445395] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6
[ 117.447641] ata5.00: irq_stat 0x40000001
[ 117.449980] ata5: SError: { HostInt 10B8B }
[ 117.452259] sr 4:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[ 117.452277] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 117.452279] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 117.456956] ata5.00: status: { DRDY ERR }
[ 117.459255] ata5: hard resetting link
[ 117.948090] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 117.974872] ata5.00: configured for UDMA/100
[ 117.975334] ata5: EH complete
[ 119.089772] RPC: Registered named UNIX socket transport module.
[ 119.089776] RPC: Registered udp transport module.
[ 119.089778] RPC: Registered tcp transport module.
[ 119.089780] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 119.135698] FS-Cache: Loaded
[ 119.172222] FS-Cache: Netfs 'nfs' registered for caching
[ 119.182360] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 122.418579] r8169 0000:0e:00.0: eth0: link down
[ 122.418771] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 122.571867] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 124.037870] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 124.742176] wlan0: authenticate with 84:c9:b2:a9:7c:14 (try 1)
[ 124.743615] wlan0: authenticated
[ 124.743878] wlan0: associate with 84:c9:b2:a9:7c:14 (try 1)
[ 124.747384] wlan0: RX AssocResp from 84:c9:b2:a9:7c:14 (capab=0xc11 status=0 aid=1)
[ 124.747388] wlan0: associated
J’ai remarqué que les temps d’attente long corresponde aux endroits où il y a des erreurs ata5
tt@debian-tt:~$ dmesg | grep "ata5"
[ 1.278697] ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 46
[ 1.772046] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.785749] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TO01, max UDMA/100
[ 1.798875] ata5.00: configured for UDMA/100
[ 6.396247] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6
[ 6.396314] ata5.00: irq_stat 0x40000001
[ 6.396373] ata5: SError: { HostInt 10B8B }
[ 6.396443] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 6.396565] ata5.00: status: { DRDY ERR }
[ 6.396627] ata5: hard resetting link
[ 6.896066] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 11.896070] ata5.00: qc timeout (cmd 0xa1)
[ 11.896084] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 11.896089] ata5.00: revalidation failed (errno=-5)
[ 11.896159] ata5: hard resetting link
[ 12.388091] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.414619] ata5.00: configured for UDMA/100
[ 12.415369] ata5: EH complete
[ 44.896091] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x880800 action 0x6 frozen
[ 44.896195] ata5: SError: { HostInt 10B8B LinkSeq }
[ 44.896280] ata5.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 44.896456] ata5.00: status: { DRDY }
[ 44.896510] ata5: hard resetting link
[ 54.928049] ata5: softreset failed (device not ready)
[ 54.928126] ata5: hard resetting link
[ 64.932080] ata5: softreset failed (1st FIS failed)
[ 64.932149] ata5: hard resetting link
[ 99.932069] ata5: softreset failed (1st FIS failed)
[ 99.932141] ata5: limiting SATA link speed to 1.5 Gbps
[ 99.932146] ata5: hard resetting link
[ 100.424106] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 100.450979] ata5.00: configured for UDMA/100
[ 100.451456] ata5: EH complete
[ 117.445395] ata5.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6
[ 117.447641] ata5.00: irq_stat 0x40000001
[ 117.449980] ata5: SError: { HostInt 10B8B }
[ 117.452277] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 117.456956] ata5.00: status: { DRDY ERR }
[ 117.459255] ata5: hard resetting link
[ 117.948090] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 117.974872] ata5.00: configured for UDMA/100
[ 117.975334] ata5: EH complete
Ah oui une remarque : J’ai pas été très soigneux avec mon ordinateur (portable) ces derniers temps car il m’arrive souvent de le laisser tout seul et que depuis peu la prise du chargeur bug un peu, arrete la charge et l’ordinateur s’est eteint de manière un peu violente à cause de la batterie
Donc c’est plutôt pour savoir qu’est-ce-qu’y arrive à mon ordinateur, s’il y a un truc que je peux faire etc …
Merci d’avance ^^
)