Disque externe partition "read only"

laso6 · Février 21, 2016, 9:36pm

Bonjour à tous et à toutes !

J’ai un disque externe avec plusieurs partitions, l’une formatée en ext4.
L’accès en écriture m’est refusé…

so6@dell-so6:~$ mount sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=126732,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=102452k,mode=755) /dev/disk/by-uuid/8c69a8c4-61c9-4519-bde7-05b978377225 on / type ext4 (rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=595240k) /dev/sda6 on /home type ext4 (rw,relatime,user_xattr,acl,barrier=1,data=ordered) rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime) /dev/sdb7 on /media/Alexinux type ext4 (ro,nosuid,nodev,relatime,user_xattr,acl,barrier=1,data=ordered,uhelper=udisks) /dev/sdb5 on /media/239bbb72-8471-31eb-a2ac-13f94427dd1b type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb8 on /media/HFS+2 type hfsplus (rw,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb3 on /media/os9 type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) so6@dell-so6:~$

J’ai tenté de faire une vérification du système de fichier par fsck

so6@dell-so6:~$ su Mot de passe : root@dell-so6:/home/so6# umount /dev/sdb7 root@dell-so6:/home/so6# fsck -y /dev/sdb7 fsck de util-linux 2.20.1 e2fsck 1.42.5 (29-Jul-2012) Alexinux : récupération du journal Alexinux contient un système de fichiers comportant des erreurs, vérification forcée. Passe 1 : vérification des i-noeuds, des blocs et des tailles Passe 2 : vérification de la structure des répertoires Passe 3 : vérification de la connectivité des répertoires Passe 4 : vérification des compteurs de référence Passe 5 : vérification de l'information du sommaire de groupe Alexinux : 9835/6070272 fichiers (4.4% non contigüs), 14077287/24278852 blocs root@dell-so6:/home/so6#

ce qui a l’air de fonctionner car après remontage, la partition en question (/dev/sdb7) paraît montée en “rw”…

root@dell-so6:/home/so6# mount sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=126732,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=102452k,mode=755) /dev/disk/by-uuid/8c69a8c4-61c9-4519-bde7-05b978377225 on / type ext4 (rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=595240k) /dev/sda6 on /home type ext4 (rw,relatime,user_xattr,acl,barrier=1,data=ordered) rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime) /dev/sdb5 on /media/239bbb72-8471-31eb-a2ac-13f94427dd1b type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb8 on /media/HFS+2 type hfsplus (rw,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb3 on /media/os9 type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb7 on /media/Alexinux type ext4 (rw,nosuid,nodev,relatime,user_xattr,acl,barrier=1,data=ordered,uhelper=udisks) root@dell-so6:/home/so6#

Mais lorsque je veux copier des fichiers à partir de mon ordi…

root@dell-so6:/home/so6/Images# cp -R 2011-2012 /media/Alexinux/Photos cp: impossible de créer le répertoire « /media/Alexinux/Photos/2011-2012 »: Système de fichiers accessible en lecture seulement root@dell-so6:/home/so6/Images#

Et effectivement, cette partition paraît encore et toujours montée en “read only”…

root@dell-so6:/home/so6/Images# mount sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=126732,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=102452k,mode=755) /dev/disk/by-uuid/8c69a8c4-61c9-4519-bde7-05b978377225 on / type ext4 (rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=595240k) /dev/sda6 on /home type ext4 (rw,relatime,user_xattr,acl,barrier=1,data=ordered) rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime) /dev/sdb5 on /media/239bbb72-8471-31eb-a2ac-13f94427dd1b type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb8 on /media/HFS+2 type hfsplus (rw,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb3 on /media/os9 type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb7 on /media/Alexinux type ext4 (ro,nosuid,nodev,relatime,user_xattr,acl,barrier=1,data=ordered,uhelper=udisks) root@dell-so6:/home/so6/Images#

Je tourne en rond…

Merci de votre aide.

avram · Février 21, 2016, 9:36pm

bonjour. quel est votre fstab? quels sont les droits de sdb7(si c’est bien sur sdb7 que vous voulez écrire)

laso6 · Février 21, 2016, 9:36pm

fichier fstab :

[quote] /etc/fstab: static file system information.

Use ‘blkid’ to print the universally unique identifier for a

device; this may be used with UUID= as a more robust way to name devices

that works even if disks are added and removed. See fstab(5).

/ was on /dev/sda1 during installation

UUID=8c69a8c4-61c9-4519-bde7-05b978377225 / ext4 errors=remount-ro 0 1

/home was on /dev/sda6 during installation

UUID=92e786fe-4360-47ee-8a4a-6d7cc4bf2ae3 /home ext4 defaults 0 2

swap was on /dev/sda5 during installation

UUID=1e4ad39f-2d09-4cec-b520-ac914d651a02 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/sr0 /media/floppy0 auto rw,user,noauto 0 0

[/quote]

et…

root@dell-so6:~# ll /media/ total 12 drwxrwxr-t 1 root 80 37 janv. 1 1970 239bbb72-8471-31eb-a2ac-13f94427dd1b drwx------ 8 so6 so6 4096 août 21 2014 Alexinux lrwxrwxrwx 1 root root 6 déc. 5 2013 cdrom -> cdrom0 drwxr-xr-x 2 root root 4096 déc. 5 2013 cdrom0 lrwxrwxrwx 1 root root 7 déc. 5 2013 floppy -> floppy0 drwxrwxrwx 2 root root 4096 déc. 5 2013 floppy0 drwxr-xr-x 1 root root 10 août 21 2014 HFS+2 drwxrwxr-x 1 root 80 28 févr. 22 2009 os9 root@dell-so6:~#

avram · Février 21, 2016, 9:36pm

effectivement les droits sur sdb7 sont bons mais pas d’écriture et il est indiqué qu’il y avait des erreurs dans son système de fichiers que fsck n’a peut être pas pu bien réparer.Si vous avez la possibilité de sauvegarder les données de sdb7 tentez un reformatage de sdb7 pour éliminer déjà cette source d’erreurs.

laso6 · Février 21, 2016, 9:36pm

Mmmmh…
Ça se complique…

J’ai sauvegardé les données sur le volume en question afin de le reformater, mais lorsque je lance GParted, j’obtiens un message d’erreur tenace :

Avertissement de libparted : Error fsyncing/closing /dev/sdb: Erreur d’entrée/sortie"

J’ai tenté quand même de reformater en ext4 mon volume, mais maintenant la commande “mount” me renvoie ceci :

@dell-so6:~$ mount sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=126732,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=102452k,mode=755) /dev/disk/by-uuid/8c69a8c4-61c9-4519-bde7-05b978377225 on / type ext4 (rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=595240k) /dev/sda6 on /home type ext4 (rw,relatime,user_xattr,acl,barrier=1,data=ordered) rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime) /dev/sdb5 on /media/239bbb72-8471-31eb-a2ac-13f94427dd1b type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb7 on /media/1c5953ad-0f13-4663-aee5-d84b9fc6280a type ext4 (ro,nosuid,nodev,relatime,user_xattr,barrier=1,data=ordered,uhelper=udisks) /dev/sdb8 on /media/HFS+2 type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) /dev/sdb3 on /media/os9 type hfsplus (ro,nosuid,nodev,relatime,umask=22,uid=0,gid=0,nls=utf8,uhelper=udisks) so6@dell-so6:~$

Tous les volumes de sdb sont montés en “read only”…

avram · Février 21, 2016, 9:36pm

vous avez essayé de brancher votre disque externe sur une autre prise usb,peut être prise usb defaillante?Débrancher le disque et le rebrancher?Que dit dmesg?En utilisant un live cd l’erreur est elle toujours présente?essayez avec la dernière knoppix qui a un kernel 3.9 .

laso6 · Février 21, 2016, 9:36pm

dmesg dit beaucoup de choses… Je copie la partie qui me semble significative (?)

Je n’essaie rien d’autre pour l’instant, car le disque en question est utilisé par GParted. J’ai lancé (au pifomètre) une opération de récupérations de données… Et c’est très long…

[ 1023.880188] usb 1-7: new high-speed USB device number 4 using ehci_hcd [ 1024.013203] usb 1-7: New USB device found, idVendor=059f, idProduct=0621 [ 1024.013213] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1024.013221] usb 1-7: Product: LaCie HD Drive [ 1024.013227] usb 1-7: Manufacturer: LaCie [ 1024.013233] usb 1-7: SerialNumber: 10000E000D150C82 [ 1024.102217] Initializing USB Mass Storage driver... [ 1024.102438] scsi2 : usb-storage 1-7:1.0 [ 1024.102600] usbcore: registered new interface driver usb-storage [ 1024.102604] USB Mass Storage support registered. [ 1029.636362] scsi 2:0:0:0: Direct-Access SEAGATE ST3250820A 3.AA PQ: 0 ANSI: 2 [ 1029.639148] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1029.639530] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1029.639879] sd 2:0:0:0: [sdb] Write Protect is off [ 1029.639889] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ 1029.640882] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1029.658189] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 [ 1029.664269] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1030.862013] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 1031.722418] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4365: Filesystem error recorded from previous mount: IO failure [ 1031.722430] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4366: Marking fs in need of filesystem check. [ 1031.723991] EXT4-fs (sdb7): warning: mounting fs with errors, running e2fsck is recommended [ 1031.725424] EXT4-fs (sdb7): recovery complete [ 1031.725972] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 1032.001380] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 1032.394581] end_request: I/O error, dev sdb, sector 0 [ 1037.011194] end_request: I/O error, dev sdb, sector 142607712 [ 1037.011251] Aborting journal on device sdb7-8. [ 1136.333518] usb 1-7: USB disconnect, device number 4 [ 1136.335292] end_request: I/O error, dev sdb, sector 0 [ 1136.346274] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 1136.352108] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 1136.381257] EXT4-fs error (device sdb7): ext4_put_super:819: Couldn't clean up the journal [ 1136.381268] EXT4-fs (sdb7): Remounting filesystem read-only [ 1143.696182] usb 1-7: new high-speed USB device number 5 using ehci_hcd [ 1143.764326] hub 1-0:1.0: unable to enumerate USB device on port 7 [ 1144.136204] usb 1-7: new high-speed USB device number 6 using ehci_hcd [ 1144.269225] usb 1-7: New USB device found, idVendor=1058, idProduct=07a8 [ 1144.269236] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1144.269243] usb 1-7: Product: My Passport 07A8 [ 1144.269250] usb 1-7: Manufacturer: Western Digital [ 1144.269256] usb 1-7: SerialNumber: 575832314143325031313334 [ 1144.269952] scsi3 : usb-storage 1-7:1.0 [ 1145.269097] scsi 3:0:0:0: Direct-Access WD My Passport 07A8 1033 PQ: 0 ANSI: 6 [ 1145.269706] scsi 3:0:0:1: Enclosure WD SES Device 1033 PQ: 0 ANSI: 6 [ 1145.276169] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1145.276780] sd 3:0:0:0: [sdb] Spinning up disk... [ 1145.276824] scsi 3:0:0:1: Attached scsi generic sg2 type 13 [ 1146.280163] .ready [ 1146.509006] sd 3:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 1146.509868] sd 3:0:0:0: [sdb] Write Protect is off [ 1146.509879] sd 3:0:0:0: [sdb] Mode Sense: 53 00 10 08 [ 1146.510711] sd 3:0:0:0: [sdb] No Caching mode page found [ 1146.510721] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1146.513940] sd 3:0:0:0: [sdb] No Caching mode page found [ 1146.513949] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1146.528301] sdb: sdb1 sdb2 [ 1146.534197] sd 3:0:0:0: [sdb] No Caching mode page found [ 1146.534208] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1146.534216] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1146.597738] ses 3:0:0:1: Attached Enclosure device [ 1147.080079] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended [ 1147.083325] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1147.426910] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1168.248266] usb 4-1: USB disconnect, device number 2 [ 1177.188182] usb 1-5: new high-speed USB device number 7 using ehci_hcd [ 1177.321076] usb 1-5: New USB device found, idVendor=059f, idProduct=0621 [ 1177.321087] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1177.321095] usb 1-5: Product: LaCie HD Drive [ 1177.321101] usb 1-5: Manufacturer: LaCie [ 1177.321107] usb 1-5: SerialNumber: 10000E000D150C82 [ 1177.322657] scsi4 : usb-storage 1-5:1.0 [ 1178.321171] scsi 4:0:0:0: Direct-Access SEAGATE ST3250820A 3.AA PQ: 0 ANSI: 2 [ 1178.325795] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 1178.326350] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1178.327091] sd 4:0:0:0: [sdc] Write Protect is off [ 1178.327100] sd 4:0:0:0: [sdc] Mode Sense: 53 00 00 08 [ 1178.327830] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1178.350059] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 [ 1178.361354] sd 4:0:0:0: [sdc] Attached SCSI disk [ 1179.593532] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 1180.060393] hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 1180.414680] EXT4-fs warning (device sdc7): ext4_clear_journal_err:4365: Filesystem error recorded from previous mount: IO failure [ 1180.414693] EXT4-fs warning (device sdc7): ext4_clear_journal_err:4366: Marking fs in need of filesystem check. [ 1180.416615] EXT4-fs (sdc7): warning: mounting fs with errors, running e2fsck is recommended [ 1180.417848] EXT4-fs (sdc7): recovery complete [ 1180.418428] EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null) [ 1180.877978] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 1186.018971] end_request: I/O error, dev sdc, sector 142607712 [ 1186.019009] Aborting journal on device sdc7-8. [ 1246.822949] EXT4-fs error (device sdc7): ext4_journal_start_sb:327: Detected aborted journal [ 1246.822965] EXT4-fs (sdc7): Remounting filesystem read-only [ 1480.672063] EXT4-fs (sdc7): error count since last fsck: 8 [ 1480.672073] EXT4-fs (sdc7): initial error at time 1430492482: ext4_journal_start_sb:327 [ 1480.672082] EXT4-fs (sdc7): last error at time 1430496311: ext4_journal_start_sb:327 [ 5217.813533] usb 1-7: USB disconnect, device number 6 [ 5217.900123] Buffer I/O error on device sdb1, logical block 6324224 [ 5217.900131] lost page write due to I/O error on sdb1 [ 5217.900136] JBD2: I/O error detected when updating journal superblock for sdb1-8. [ 5232.960097] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 5233.135264] usb 5-1: New USB device found, idVendor=093a, idProduct=2510 [ 5233.135276] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5233.135284] usb 5-1: Product: USB Optical Mouse [ 5233.135290] usb 5-1: Manufacturer: PixArt [ 5233.152114] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input13 [ 5233.153168] generic-usb 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.3-1/input0 [ 5261.871342] end_request: I/O error, dev sdc, sector 0 [ 5267.811545] end_request: I/O error, dev sdc, sector 0 [ 5271.228024] end_request: I/O error, dev sdc, sector 0 [ 5274.111111] end_request: I/O error, dev sdc, sector 0 [ 5276.709131] end_request: I/O error, dev sdc, sector 0 [ 5278.915904] end_request: I/O error, dev sdc, sector 0 [ 5279.669046] end_request: I/O error, dev sdc, sector 0 [ 5280.827709] end_request: I/O error, dev sdc, sector 0 [ 5282.292638] end_request: I/O error, dev sdc, sector 0 [ 5283.141036] end_request: I/O error, dev sdc, sector 0 [ 5296.694737] end_request: I/O error, dev sdc, sector 0 [ 5318.909991] end_request: I/O error, dev sdc, sector 0 [ 5320.237220] end_request: I/O error, dev sdc, sector 0 [ 5322.236930] end_request: I/O error, dev sdc, sector 0 [ 5400.274004] usb 1-5: USB disconnect, device number 7 [ 5400.322759] sd 4:0:0:0: [sdc] Synchronizing SCSI cache [ 5400.323103] sd 4:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 5400.327087] EXT4-fs error (device sdc7): ext4_put_super:819: Couldn't clean up the journal [ 5418.824246] usb 1-5: new high-speed USB device number 9 using ehci_hcd [ 5418.957633] usb 1-5: New USB device found, idVendor=059f, idProduct=0621 [ 5418.957644] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5418.957653] usb 1-5: Product: LaCie HD Drive [ 5418.957659] usb 1-5: Manufacturer: LaCie [ 5418.957665] usb 1-5: SerialNumber: 10000E000D150C82 [ 5418.958451] scsi5 : usb-storage 1-5:1.0 [ 5424.610551] scsi 5:0:0:0: Direct-Access SEAGATE ST3250820A 3.AA PQ: 0 ANSI: 2 [ 5424.613013] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 5424.615525] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 5424.616641] sd 5:0:0:0: [sdb] Write Protect is off [ 5424.616651] sd 5:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ 5424.617513] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5424.632089] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 [ 5424.636143] sd 5:0:0:0: [sdb] Attached SCSI disk [ 5440.488392] end_request: I/O error, dev sdb, sector 0 [ 5446.304472] end_request: I/O error, dev sdb, sector 0 [ 5447.551142] end_request: I/O error, dev sdb, sector 0 [ 5448.486295] end_request: I/O error, dev sdb, sector 0 [ 5449.437073] end_request: I/O error, dev sdb, sector 0 [ 5450.886368] end_request: I/O error, dev sdb, sector 0 [ 5451.925280] end_request: I/O error, dev sdb, sector 0 [ 5452.653809] end_request: I/O error, dev sdb, sector 0 [ 5453.596196] end_request: I/O error, dev sdb, sector 0 [ 5455.953432] end_request: I/O error, dev sdb, sector 0 [ 5457.747969] end_request: I/O error, dev sdb, sector 0 [ 5458.686998] end_request: I/O error, dev sdb, sector 0 [ 5459.419772] end_request: I/O error, dev sdb, sector 0 [ 5460.051668] end_request: I/O error, dev sdb, sector 0 [ 5461.402451] end_request: I/O error, dev sdb, sector 0 [ 5462.136220] end_request: I/O error, dev sdb, sector 0 [ 5462.865255] end_request: I/O error, dev sdb, sector 0 [ 5463.610133] end_request: I/O error, dev sdb, sector 0 [ 5464.412059] end_request: I/O error, dev sdb, sector 0 [ 5466.393990] end_request: I/O error, dev sdb, sector 0 [ 5467.430031] end_request: I/O error, dev sdb, sector 0 [ 5513.298625] end_request: I/O error, dev sdb, sector 0 [ 5523.366074] end_request: I/O error, dev sdb, sector 0 [ 5526.365876] end_request: I/O error, dev sdb, sector 0 [ 5526.482559] end_request: I/O error, dev sdb, sector 0 [ 5526.483807] end_request: I/O error, dev sdb, sector 0 [ 5543.385988] end_request: I/O error, dev sdb, sector 0 [ 5543.388108] end_request: I/O error, dev sdb, sector 0 [ 5543.389484] end_request: I/O error, dev sdb, sector 0 [ 5550.542601] end_request: I/O error, dev sdb, sector 0 [ 5552.979545] end_request: I/O error, dev sdb, sector 0 [ 5555.832644] end_request: I/O error, dev sdb, sector 0 [ 5558.061601] end_request: I/O error, dev sdb, sector 0 [ 5558.892505] end_request: I/O error, dev sdb, sector 0 [ 5559.623656] end_request: I/O error, dev sdb, sector 0 [ 5563.964167] end_request: I/O error, dev sdb, sector 0 [ 5564.811570] end_request: I/O error, dev sdb, sector 0 [ 5565.441497] end_request: I/O error, dev sdb, sector 0 [ 5566.177216] end_request: I/O error, dev sdb, sector 0 [ 5566.829499] end_request: I/O error, dev sdb, sector 0 [ 5568.179430] end_request: I/O error, dev sdb, sector 0 [ 5568.907823] end_request: I/O error, dev sdb, sector 0 [ 5569.741852] end_request: I/O error, dev sdb, sector 0 [ 5607.316432] usb 1-5: USB disconnect, device number 9 [ 5607.333039] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [ 5607.333112] sd 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 5630.116139] usb 1-5: new high-speed USB device number 10 using ehci_hcd [ 5630.249459] usb 1-5: New USB device found, idVendor=059f, idProduct=0621 [ 5630.249471] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5630.249479] usb 1-5: Product: LaCie HD Drive [ 5630.249485] usb 1-5: Manufacturer: LaCie [ 5630.249491] usb 1-5: SerialNumber: 10000E000D150C82 [ 5630.250998] scsi6 : usb-storage 1-5:1.0 [ 5635.816530] scsi 6:0:0:0: Direct-Access SEAGATE ST3250820A 3.AA PQ: 0 ANSI: 2 [ 5635.819383] sd 6:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 5635.819710] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 5635.820210] sd 6:0:0:0: [sdd] Write Protect is off [ 5635.820220] sd 6:0:0:0: [sdd] Mode Sense: 53 00 00 08 [ 5635.820990] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5635.846434] sdd: [mac] sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 [ 5635.851244] sd 6:0:0:0: [sdd] Attached SCSI disk [ 5669.441328] end_request: I/O error, dev sdd, sector 0 [ 5774.647505] end_request: I/O error, dev sdd, sector 0 [ 5777.125468] end_request: I/O error, dev sdd, sector 0 [ 5778.467762] end_request: I/O error, dev sdd, sector 0 [ 5779.618299] end_request: I/O error, dev sdd, sector 0 [ 5781.276982] end_request: I/O error, dev sdd, sector 0 [ 5783.392318] end_request: I/O error, dev sdd, sector 0 [ 5786.442013] end_request: I/O error, dev sdd, sector 0 [ 5787.184416] end_request: I/O error, dev sdd, sector 0 [ 5787.911689] end_request: I/O error, dev sdd, sector 0 [ 5788.535204] end_request: I/O error, dev sdd, sector 0 [ 5789.161086] end_request: I/O error, dev sdd, sector 0 [ 5791.326915] end_request: I/O error, dev sdd, sector 0 [ 5792.058436] end_request: I/O error, dev sdd, sector 0 [ 5792.695092] end_request: I/O error, dev sdd, sector 0 [ 5793.391736] end_request: I/O error, dev sdd, sector 0 [ 5794.023004] end_request: I/O error, dev sdd, sector 0 [ 5834.245220] hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 5852.557393] usb 1-5: USB disconnect, device number 10 [ 5852.560416] sd 6:0:0:0: [sdd] Synchronizing SCSI cache [ 5852.560518] sd 6:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 5865.412244] usb 1-5: new high-speed USB device number 11 using ehci_hcd [ 5865.545475] usb 1-5: New USB device found, idVendor=059f, idProduct=0621 [ 5865.545485] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5865.545493] usb 1-5: Product: LaCie HD Drive [ 5865.545499] usb 1-5: Manufacturer: LaCie [ 5865.545505] usb 1-5: SerialNumber: 10000E000D150C82 [ 5865.547130] scsi7 : usb-storage 1-5:1.0 [ 5871.133420] scsi 7:0:0:0: Direct-Access SEAGATE ST3250820A 3.AA PQ: 0 ANSI: 2 [ 5871.136384] sd 7:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 5871.136658] sd 7:0:0:0: Attached scsi generic sg1 type 0 [ 5871.137140] sd 7:0:0:0: [sdb] Write Protect is off [ 5871.137149] sd 7:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ 5871.137879] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5871.163336] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 [ 5871.168059] sd 7:0:0:0: [sdb] Attached SCSI disk [ 5872.175658] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 5872.723131] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 5873.007181] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 5873.281464] hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 5879.010895] end_request: I/O error, dev sdb, sector 142607712 [ 5879.010931] Aborting journal on device sdb7-8. [ 5898.949570] end_request: I/O error, dev sdb, sector 0 [ 5907.561478] end_request: I/O error, dev sdb, sector 0 [ 5909.034232] end_request: I/O error, dev sdb, sector 0 [ 5911.637206] end_request: I/O error, dev sdb, sector 0 [ 5912.769535] end_request: I/O error, dev sdb, sector 0 [ 5913.480401] end_request: I/O error, dev sdb, sector 0 [ 5914.129415] end_request: I/O error, dev sdb, sector 0 [ 5914.921605] end_request: I/O error, dev sdb, sector 0 [ 5915.858725] end_request: I/O error, dev sdb, sector 0 [ 5916.578410] end_request: I/O error, dev sdb, sector 0 [ 5917.242518] end_request: I/O error, dev sdb, sector 0 [ 5917.766396] end_request: I/O error, dev sdb, sector 0 [ 5919.591703] end_request: I/O error, dev sdb, sector 0 [ 6009.900631] EXT4-fs error (device sdb7): ext4_put_super:819: Couldn't clean up the journal [ 6009.900643] EXT4-fs (sdb7): Remounting filesystem read-only [ 6010.082019] end_request: I/O error, dev sdb, sector 0 [ 6012.378984] end_request: I/O error, dev sdb, sector 0 [ 6013.212041] end_request: I/O error, dev sdb, sector 0 [ 6014.253293] end_request: I/O error, dev sdb, sector 0 [ 6015.088925] end_request: I/O error, dev sdb, sector 0 [ 6017.820169] end_request: I/O error, dev sdb, sector 0 [ 6019.448587] end_request: I/O error, dev sdb, sector 0 [ 6021.020261] end_request: I/O error, dev sdb, sector 0 [ 6021.748048] end_request: I/O error, dev sdb, sector 0 [ 6022.490811] end_request: I/O error, dev sdb, sector 0 [ 6023.747728] end_request: I/O error, dev sdb, sector 0 [ 6024.580248] end_request: I/O error, dev sdb, sector 0 [ 6025.722804] end_request: I/O error, dev sdb, sector 0 [ 6026.469043] end_request: I/O error, dev sdb, sector 0 [ 6028.685494] end_request: I/O error, dev sdb, sector 0 [ 6051.044849] end_request: I/O error, dev sdb, sector 0 [ 6071.264031] end_request: I/O error, dev sdb, sector 0 [ 6072.820847] end_request: I/O error, dev sdb, sector 0 [ 6072.931924] end_request: I/O error, dev sdb, sector 0 [ 6072.933420] end_request: I/O error, dev sdb, sector 0 [ 6089.787862] end_request: I/O error, dev sdb, sector 0 [ 6089.790103] end_request: I/O error, dev sdb, sector 0 [ 6089.791348] end_request: I/O error, dev sdb, sector 0 [ 6094.270233] end_request: I/O error, dev sdb, sector 0 [ 6096.405940] end_request: I/O error, dev sdb, sector 0 [ 6098.346255] end_request: I/O error, dev sdb, sector 0 [ 6099.751435] end_request: I/O error, dev sdb, sector 0 [ 6100.691728] end_request: I/O error, dev sdb, sector 0 [ 6101.321277] end_request: I/O error, dev sdb, sector 0 [ 6101.948759] end_request: I/O error, dev sdb, sector 0 [ 6102.485773] end_request: I/O error, dev sdb, sector 0 [ 6103.111915] end_request: I/O error, dev sdb, sector 0 [ 6103.740219] end_request: I/O error, dev sdb, sector 0 [ 6104.493317] end_request: I/O error, dev sdb, sector 0 [ 6106.284506] end_request: I/O error, dev sdb, sector 0 [ 6119.994456] end_request: I/O error, dev sdb, sector 0 [ 6121.515255] end_request: I/O error, dev sdb, sector 0 [ 6123.639340] end_request: I/O error, dev sdb, sector 0 [ 6125.059769] end_request: I/O error, dev sdb, sector 0 [ 6125.797155] end_request: I/O error, dev sdb, sector 0 [ 6126.524314] end_request: I/O error, dev sdb, sector 0 [ 6127.256215] end_request: I/O error, dev sdb, sector 0 [ 6128.199103] end_request: I/O error, dev sdb, sector 0 [ 6129.344522] end_request: I/O error, dev sdb, sector 0 [ 6130.177424] end_request: I/O error, dev sdb, sector 0 [ 6131.034706] end_request: I/O error, dev sdb, sector 0 [ 6131.825353] end_request: I/O error, dev sdb, sector 0 [ 6133.977666] end_request: I/O error, dev sdb, sector 0 [ 6141.905678] end_request: I/O error, dev sdb, sector 0 [ 6143.495713] end_request: I/O error, dev sdb, sector 0 [ 6145.524671] end_request: I/O error, dev sdb, sector 0 [ 6146.931604] end_request: I/O error, dev sdb, sector 0 [ 6147.762745] end_request: I/O error, dev sdb, sector 0 [ 6148.608893] end_request: I/O error, dev sdb, sector 0 [ 6149.647196] end_request: I/O error, dev sdb, sector 0 [ 6150.487095] end_request: I/O error, dev sdb, sector 0 [ 6151.219979] end_request: I/O error, dev sdb, sector 0 [ 6152.463908] end_request: I/O error, dev sdb, sector 0 [ 6153.428545] end_request: I/O error, dev sdb, sector 0 [ 6154.157203] end_request: I/O error, dev sdb, sector 0 [ 6155.050120] end_request: I/O error, dev sdb, sector 0 [ 6156.918518] end_request: I/O error, dev sdb, sector 0 [ 6166.097464] end_request: I/O error, dev sdb, sector 0 [ 6167.667756] end_request: I/O error, dev sdb, sector 0 [ 6169.584328] end_request: I/O error, dev sdb, sector 0 [ 6170.787129] end_request: I/O error, dev sdb, sector 0 [ 6171.629281] end_request: I/O error, dev sdb, sector 0 [ 6172.466420] end_request: I/O error, dev sdb, sector 0 [ 6173.301835] end_request: I/O error, dev sdb, sector 0 [ 6174.238634] end_request: I/O error, dev sdb, sector 0 [ 6175.073409] end_request: I/O error, dev sdb, sector 0 [ 6176.116093] end_request: I/O error, dev sdb, sector 0 [ 6177.087938] end_request: I/O error, dev sdb, sector 0 [ 6177.916360] end_request: I/O error, dev sdb, sector 0 [ 6178.653630] end_request: I/O error, dev sdb, sector 0 [ 6180.667071] end_request: I/O error, dev sdb, sector 0 [ 6194.773388] end_request: I/O error, dev sdb, sector 0 [ 6196.538837] end_request: I/O error, dev sdb, sector 0 [ 6197.349984] end_request: I/O error, dev sdb, sector 0 [ 6197.981629] end_request: I/O error, dev sdb, sector 0 [ 6198.530435] end_request: I/O error, dev sdb, sector 0 [ 6198.532167] end_request: I/O error, dev sdb, sector 0 [ 6199.224288] end_request: I/O error, dev sdb, sector 0 [ 6200.007194] end_request: I/O error, dev sdb, sector 0 [ 6200.860092] end_request: I/O error, dev sdb, sector 0 [ 6201.489843] end_request: I/O error, dev sdb, sector 0 [ 6202.243306] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 6202.683439] hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 6203.107690] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 6281.295944] end_request: I/O error, dev sdb, sector 0 [ 6286.166616] end_request: I/O error, dev sdb, sector 0 [ 6335.502496] end_request: I/O error, dev sdb, sector 0 [ 6338.143597] end_request: I/O error, dev sdb, sector 0 [ 6344.495644] end_request: I/O error, dev sdb, sector 0 [ 6345.111193] end_request: I/O error, dev sdb, sector 0 [ 6346.240480] end_request: I/O error, dev sdb, sector 0 [ 6347.001347] end_request: I/O error, dev sdb, sector 0 [ 6347.720905] end_request: I/O error, dev sdb, sector 0 [ 6348.649008] end_request: I/O error, dev sdb, sector 0 [ 6349.215914] end_request: I/O error, dev sdb, sector 0 [ 6349.751733] end_request: I/O error, dev sdb, sector 0 [ 6350.327835] end_request: I/O error, dev sdb, sector 0 [ 6351.779504] end_request: I/O error, dev sdb, sector 0 [ 6353.046661] end_request: I/O error, dev sdb, sector 0 [ 6355.633745] end_request: I/O error, dev sdb, sector 0 [ 6357.225680] end_request: I/O error, dev sdb, sector 0 [ 6459.954626] end_request: I/O error, dev sdb, sector 0 [ 6647.576725] end_request: I/O error, dev sdb, sector 0 [ 6648.382742] end_request: I/O error, dev sdb, sector 0 [ 6649.120521] end_request: I/O error, dev sdb, sector 0 [ 6649.826032] end_request: I/O error, dev sdb, sector 0 [ 6649.830786] end_request: I/O error, dev sdb, sector 0 [ 6650.448302] end_request: I/O error, dev sdb, sector 0 [ 6651.295734] end_request: I/O error, dev sdb, sector 0 [ 6652.185234] end_request: I/O error, dev sdb, sector 0 [ 6654.014467] end_request: I/O error, dev sdb, sector 0 [ 6664.234121] end_request: I/O error, dev sdb, sector 0 [ 6664.236878] end_request: I/O error, dev sdb, sector 0 [ 6677.992824] end_request: I/O error, dev sdb, sector 0 [ 6681.387679] end_request: I/O error, dev sdb, sector 0 [ 6683.834266] end_request: I/O error, dev sdb, sector 0 [ 6685.850462] end_request: I/O error, dev sdb, sector 0 [ 6686.687866] end_request: I/O error, dev sdb, sector 0 [ 6687.408883] end_request: I/O error, dev sdb, sector 0 [ 6688.138542] end_request: I/O error, dev sdb, sector 0 [ 6688.864173] end_request: I/O error, dev sdb, sector 0 [ 6689.690082] end_request: I/O error, dev sdb, sector 0 [ 6690.422355] end_request: I/O error, dev sdb, sector 0 [ 6691.162741] end_request: I/O error, dev sdb, sector 0 [ 6691.993154] end_request: I/O error, dev sdb, sector 0 [ 6693.117196] end_request: I/O error, dev sdb, sector 0 [ 6694.388861] end_request: I/O error, dev sdb, sector 0 [ 6814.604729] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 6818.598867] end_request: I/O error, dev sdb, sector 0 [ 6820.018454] end_request: I/O error, dev sdb, sector 142607712 [ 6820.018489] Aborting journal on device sdb7-8. [ 6820.196600] EXT4-fs error (device sdb7): ext4_journal_start_sb:327: Detected aborted journal [ 6820.196620] EXT4-fs (sdb7): Remounting filesystem read-only [ 6856.759170] EXT4-fs error (device sdb7): ext4_put_super:819: Couldn't clean up the journal [ 7005.274628] usb 1-5: USB disconnect, device number 11 [ 7005.285216] sd 7:0:0:0: [sdb] Synchronizing SCSI cache [ 7005.285293] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 7011.672066] usb 1-5: new high-speed USB device number 12 using ehci_hcd [ 7011.804903] usb 1-5: New USB device found, idVendor=059f, idProduct=0621 [ 7011.804910] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7011.804915] usb 1-5: Product: LaCie HD Drive [ 7011.804919] usb 1-5: Manufacturer: LaCie [ 7011.804923] usb 1-5: SerialNumber: 10000E000D150C82 [ 7011.814108] scsi8 : usb-storage 1-5:1.0 [ 7015.672908] scsi 8:0:0:0: Direct-Access SEAGATE ST3250820A 3.AA PQ: 0 ANSI: 2 [ 7015.676309] sd 8:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 7015.676812] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 7015.680352] sd 8:0:0:0: [sdb] Write Protect is off [ 7015.680359] sd 8:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ 7015.681167] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7015.703036] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 [ 7015.707552] sd 8:0:0:0: [sdb] Attached SCSI disk [ 7016.774626] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 7017.247565] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4365: Filesystem error recorded from previous mount: IO failure [ 7017.247573] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4366: Marking fs in need of filesystem check. [ 7017.253425] EXT4-fs (sdb7): warning: mounting fs with errors, running e2fsck is recommended [ 7017.296140] EXT4-fs (sdb7): recovery complete [ 7017.296788] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 7017.762880] hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 7018.278803] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 7019.914820] end_request: I/O error, dev sdb, sector 0 [ 7022.398503] end_request: I/O error, dev sdb, sector 142607712 [ 7022.398524] Aborting journal on device sdb7-8. [ 7023.556693] EXT4-fs error (device sdb7): ext4_journal_start_sb:327: Detected aborted journal [ 7023.556704] EXT4-fs (sdb7): Remounting filesystem read-only [ 7317.472052] EXT4-fs (sdb7): error count since last fsck: 5 [ 7317.472060] EXT4-fs (sdb7): initial error at time 1430501885: ext4_journal_start_sb:327 [ 7317.472066] EXT4-fs (sdb7): last error at time 1430502088: ext4_journal_start_sb:327 [ 7389.753931] end_request: I/O error, dev sdb, sector 0 [ 7526.365503] end_request: I/O error, dev sdb, sector 0 [ 7528.547968] end_request: I/O error, dev sdb, sector 0 [ 7529.934190] end_request: I/O error, dev sdb, sector 0 [ 7530.613921] end_request: I/O error, dev sdb, sector 0 [ 7531.301694] end_request: I/O error, dev sdb, sector 0 [ 7532.000184] end_request: I/O error, dev sdb, sector 0 [ 7532.829860] end_request: I/O error, dev sdb, sector 0 [ 7533.535013] end_request: I/O error, dev sdb, sector 0 [ 7534.151143] end_request: I/O error, dev sdb, sector 0 [ 7535.452944] end_request: I/O error, dev sdb, sector 0 [ 7660.976381] end_request: I/O error, dev sdb, sector 0 [ 7712.349053] EXT4-fs error (device sdb7): ext4_put_super:819: Couldn't clean up the journal [ 7712.615547] end_request: I/O error, dev sdb, sector 0 [ 7714.176726] end_request: I/O error, dev sdb, sector 0 [ 7716.303202] end_request: I/O error, dev sdb, sector 0 [ 7717.979624] end_request: I/O error, dev sdb, sector 0 [ 7718.811647] end_request: I/O error, dev sdb, sector 0 [ 7719.848551] end_request: I/O error, dev sdb, sector 0 [ 7720.790350] end_request: I/O error, dev sdb, sector 0 [ 7722.136259] end_request: I/O error, dev sdb, sector 0 [ 7723.278538] end_request: I/O error, dev sdb, sector 0 [ 7724.316455] end_request: I/O error, dev sdb, sector 0 [ 7726.095517] end_request: I/O error, dev sdb, sector 0 [ 7728.188309] end_request: I/O error, dev sdb, sector 0 [ 7795.894644] end_request: I/O error, dev sdb, sector 0 [ 7800.614048] end_request: I/O error, dev sdb, sector 0 [ 7802.649875] end_request: I/O error, dev sdb, sector 0 [ 7804.444067] end_request: I/O error, dev sdb, sector 0 [ 7805.285971] end_request: I/O error, dev sdb, sector 0 [ 7806.013735] end_request: I/O error, dev sdb, sector 0 [ 7807.053882] end_request: I/O error, dev sdb, sector 0 [ 7810.984399] end_request: I/O error, dev sdb, sector 0 [ 7811.610913] end_request: I/O error, dev sdb, sector 0 [ 7812.342049] end_request: I/O error, dev sdb, sector 0 [ 7812.991824] end_request: I/O error, dev sdb, sector 0 [ 7814.886506] end_request: I/O error, dev sdb, sector 0 [ 7844.234961] end_request: I/O error, dev sdb, sector 0 [ 7882.041687] end_request: I/O error, dev sdb, sector 0 [ 7883.726014] end_request: I/O error, dev sdb, sector 0 [ 7883.727242] end_request: I/O error, dev sdb, sector 0 [ 7889.885204] end_request: I/O error, dev sdb, sector 0 [ 7891.841004] end_request: I/O error, dev sdb, sector 0 [ 7894.061009] end_request: I/O error, dev sdb, sector 0 [ 7895.575148] end_request: I/O error, dev sdb, sector 0 [ 7896.509428] end_request: I/O error, dev sdb, sector 0 [ 7897.553840] end_request: I/O error, dev sdb, sector 0 [ 7898.491369] end_request: I/O error, dev sdb, sector 0 [ 7899.230762] end_request: I/O error, dev sdb, sector 0 [ 7899.961268] end_request: I/O error, dev sdb, sector 0 [ 7900.693931] end_request: I/O error, dev sdb, sector 0 [ 7901.865848] end_request: I/O error, dev sdb, sector 0 [ 7904.059273] end_request: I/O error, dev sdb, sector 0 [ 7945.503987] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4365: Filesystem error recorded from previous mount: IO failure [ 7945.503999] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4366: Marking fs in need of filesystem check. [ 7945.505703] EXT4-fs (sdb7): warning: mounting fs with errors, running e2fsck is recommended [ 7945.531187] EXT4-fs (sdb7): recovery complete [ 7945.531776] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 7949.827440] end_request: I/O error, dev sdb, sector 0 [ 7950.887439] end_request: I/O error, dev sdb, sector 142607712 [ 7950.887486] Aborting journal on device sdb7-8. [ 7951.844755] EXT4-fs error (device sdb7): ext4_journal_start_sb:327: Detected aborted journal [ 7951.844771] EXT4-fs (sdb7): Remounting filesystem read-only [ 7988.689162] EXT4-fs error (device sdb7): ext4_put_super:819: Couldn't clean up the journal [ 7997.860066] usb 1-5: USB disconnect, device number 12 [ 7997.872505] sd 8:0:0:0: [sdb] Synchronizing SCSI cache [ 7997.872584] sd 8:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 8475.388222] usb 1-5: new high-speed USB device number 13 using ehci_hcd [ 8475.520955] usb 1-5: New USB device found, idVendor=059f, idProduct=0621 [ 8475.520963] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8475.520968] usb 1-5: Product: LaCie HD Drive [ 8475.520972] usb 1-5: Manufacturer: LaCie [ 8475.520976] usb 1-5: SerialNumber: 10000E000D150C82 [ 8475.521534] scsi9 : usb-storage 1-5:1.0 [ 8481.145244] scsi 9:0:0:0: Direct-Access SEAGATE ST3250820A 3.AA PQ: 0 ANSI: 2 [ 8481.147431] sd 9:0:0:0: Attached scsi generic sg1 type 0 [ 8481.149160] sd 9:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 8481.149901] sd 9:0:0:0: [sdb] Write Protect is off [ 8481.149910] sd 9:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ 8481.150717] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8481.175491] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 [ 8481.183032] sd 9:0:0:0: [sdb] Attached SCSI disk [ 8482.935397] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 8483.472784] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4365: Filesystem error recorded from previous mount: IO failure [ 8483.472796] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4366: Marking fs in need of filesystem check. [ 8483.474446] EXT4-fs (sdb7): warning: mounting fs with errors, running e2fsck is recommended [ 8483.498604] EXT4-fs (sdb7): recovery complete [ 8483.499242] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 8484.051974] hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 8484.378072] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 8488.008731] end_request: I/O error, dev sdb, sector 0 [ 8488.994534] end_request: I/O error, dev sdb, sector 142607712 [ 8488.994580] Aborting journal on device sdb7-8. [ 8489.008670] EXT4-fs error (device sdb7): ext4_journal_start_sb:327: Detected aborted journal [ 8489.008682] EXT4-fs (sdb7): Remounting filesystem read-only [ 8622.588125] EXT4-fs error (device sdb7): ext4_put_super:819: Couldn't clean up the journal [ 8635.067036] end_request: I/O error, dev sdb, sector 0 [ 8635.184525] end_request: I/O error, dev sdb, sector 0 [ 8635.185768] end_request: I/O error, dev sdb, sector 0 [ 8638.299002] end_request: I/O error, dev sdb, sector 0 [ 8638.300990] end_request: I/O error, dev sdb, sector 0 [ 8638.302613] end_request: I/O error, dev sdb, sector 0 [10441.918320] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [10443.371514] end_request: I/O error, dev sdb, sector 0 [10447.011278] end_request: I/O error, dev sdb, sector 142607712 [10447.011325] Aborting journal on device sdb7-8. [10447.168799] EXT4-fs error (device sdb7): ext4_journal_start_sb:327: Detected aborted journal [10447.168815] EXT4-fs (sdb7): Remounting filesystem read-only [10580.968737] EXT4-fs error (device sdb7): ext4_put_super:819: Couldn't clean up the journal [12113.350436] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4365: Filesystem error recorded from previous mount: IO failure [12113.350448] EXT4-fs warning (device sdb7): ext4_clear_journal_err:4366: Marking fs in need of filesystem check. [12113.357646] EXT4-fs (sdb7): warning: mounting fs with errors, running e2fsck is recommended [12113.377301] EXT4-fs (sdb7): recovery complete [12113.377894] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [12115.571238] end_request: I/O error, dev sdb, sector 0 [12115.640818] end_request: I/O error, dev sdb, sector 0 [12118.797807] end_request: I/O error, dev sdb, sector 142607712 [12118.797835] Aborting journal on device sdb7-8. [12120.273238] EXT4-fs error (device sdb7): ext4_journal_start_sb:327: Detected aborted journal [12120.273256] EXT4-fs (sdb7): Remounting filesystem read-only [12149.727804] end_request: I/O error, dev sdb, sector 0 [12214.750041] end_request: I/O error, dev sdb, sector 0 [12217.450671] end_request: I/O error, dev sdb, sector 0 [12219.493816] end_request: I/O error, dev sdb, sector 0 [12220.493372] end_request: I/O error, dev sdb, sector 0 [12221.542772] end_request: I/O error, dev sdb, sector 0 [12222.598669] end_request: I/O error, dev sdb, sector 0 [12223.703865] end_request: I/O error, dev sdb, sector 0 [12224.708635] end_request: I/O error, dev sdb, sector 0 [12225.767917] end_request: I/O error, dev sdb, sector 0 [12227.108934] end_request: I/O error, dev sdb, sector 0 [12230.186546] end_request: I/O error, dev sdb, sector 0 [12231.210094] end_request: I/O error, dev sdb, sector 0 [12232.206616] end_request: I/O error, dev sdb, sector 0 [12234.372298] end_request: I/O error, dev sdb, sector 0 [12235.806785] end_request: I/O error, dev sdb, sector 0 [12236.752065] end_request: I/O error, dev sdb, sector 0 [12238.007191] end_request: I/O error, dev sdb, sector 0 [12238.694889] end_request: I/O error, dev sdb, sector 0 [12239.574881] end_request: I/O error, dev sdb, sector 0 [12300.944089] EXT4-fs error (device sdb7): ext4_put_super:819: Couldn't clean up the journal [12301.213849] end_request: I/O error, dev sdb, sector 0 [12303.517796] end_request: I/O error, dev sdb, sector 0 [12306.063267] end_request: I/O error, dev sdb, sector 0 [12307.036308] end_request: I/O error, dev sdb, sector 0 [12308.587361] end_request: I/O error, dev sdb, sector 0 [12309.936531] end_request: I/O error, dev sdb, sector 0 [12311.181318] end_request: I/O error, dev sdb, sector 0 [12312.527224] end_request: I/O error, dev sdb, sector 0 [12313.878138] end_request: I/O error, dev sdb, sector 0 [12314.711798] end_request: I/O error, dev sdb, sector 0 [12315.560677] end_request: I/O error, dev sdb, sector 0 [12316.616616] end_request: I/O error, dev sdb, sector 0 [12318.083913] end_request: I/O error, dev sdb, sector 0 [12320.225084] end_request: I/O error, dev sdb, sector 0 [12469.653811] end_request: I/O error, dev sdb, sector 0 [12470.705355] end_request: I/O error, dev sdb, sector 0 root@dell-so6:/home/so6#

PascalHambourg · Février 21, 2016, 9:36pm

Visiblement c’est farci d’erreurs. La connexion USB ne semble pas stable. Peut-être un problème de contacts, de port, d’alimentation…

C’est un disque USB natif, un disque ATA standard dans un boîtier USB, un disque ATA standard dans une station d’accueil USB ? Il a sa propre alimentation par adaptateur secteur ou est-il alimenté seulement par l’USB ?

Comment ça, “utilisé par Gparted” ?

Avec une connexion USB aussi instable, il vaudrait mieux s’abstenir de toute manipulation.

laso6 · Février 21, 2016, 9:36pm

C’est un disque dur LaCie avec sa propre alimentation.

OK j’interrompt “l’opération”

laso6 · Février 21, 2016, 9:36pm

Bien, je pense que vous aviez raison,la connexion usb paraît défaillante.
Je me suis connecté via cable firewire et on dirait bien que ça fonctionne, maintenant.

Merci à tous les deux de votre aide.