Bonjour,
J’ai téléchargé Debian Lenny pour i386 pour l’installer sur sur un Sony Vaio VGN-A517B (Linux localhost 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux).
J’arrive sans encombre jusqu’a l’interface graphique, Détection des disques.
Je choisis ext2 pour le formatage de sda6.
-Seulement, quand l’installateur installe le Systeme de Base, cela n’en finit plus. Je me suis aperçu que quelque chose se repete dans la console 4 (résultat de dmesg, à la fin). Cela parle du controleur de disque Ata. Le message se répète quasi-indéfiniment. Mais le systeme finit par s’installer (5h tout de même…) malgré les “Write Protect Off”.
-Rebelote pour installer lilo (grub2 bloque a chaque démarrage suivant un demarrage de Windows,et je dois effectuer une Rescue et le réinstaller; grub2 sectaire ?): cela met 10 min pour ecrire sur le disque.
Cependant, une fois installé
Je copie à la fin les resultats des commandes (je n’ai pas réussi à attacher de fichier…).
Une question subsidiaire, cela signifie-t-il que les disques Ultra ATA sont branches sur un controleur Scsi ? parce que ce n’est pas ce que montre le gestionnaire de peripheriques Windows, qui montre (par connection), mon disque sur un Contrôleur IDE Intel® 82801 - Ultra ATA Storage. J’ai essayé de comprendre quelque chose à ca en lisant des forums mais je n’ai pas tout compris. Dans mon esprit, le SCSI est une norme générale dont émane le ATA et le Ultra-ATA, pas un contrôleur spécifique. Corrigez-moi si je dis une bétise.
Pourtant le module piix_ide est chargé, mais peut-être faut-il un argument spécial.
Quelqu’un saurait-il comment faire ? puisque cela fonctionne très bien après l’installation, c’est que le noyau a les bons modules.
Merci d’avance, j’ai cherché partout mais j’ai l’impression d’être le seul à avoir ce problème. Pourtant c’est un portable donc tout est de série, je n’ai rien rajouté.
Désolé pour la longueur mais je n’ai pas pu attacher de fichier.
Merci
Ciao
dmesg à l’installation
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-486 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 Sat Jan 10 17:46:23 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001ffcf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffcf000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 131008) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131008
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131008
[ 0.000000] On node 0 totalpages: 131008
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6910, 0014 (r0 SONY )
[ 0.000000] ACPI: RSDT 1FFC0000, 0038 (r1 SONY F2 20050701 MSFT 97)
[ 0.000000] ACPI: FACP 1FFC0200, 0084 (r2 SONY F2 20050701 MSFT 97)
[ 0.000000] ACPI: DSDT 1FFC0470, 54A7 (r1 SONY F2 20050701 INTL 2002026)
[ 0.000000] ACPI: FACS 1FFCF000, 0040
[ 0.000000] ACPI: APIC 1FFC0390, 0054 (r1 SONY F2 20050701 MSFT 97)
[ 0.000000] ACPI: MCFG 1FFC03F0, 003C (r1 SONY F2 20050701 MSFT 97)
[ 0.000000] ACPI: OEMB 1FFCF040, 0040 (r1 SONY F2 20050701 MSFT 97)
[ 0.000000] ACPI: SSDT 1FFC5920, 02B7 (r1 SONY F2 20050701 INTL 2002026)
[ 0.000000] ACPI: DMI detected: Sony
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129984
[ 0.000000] Kernel command line: video=vesa:ywrap,mtrr vga=788 initrd=/install.386/gtk/initrd.gz rescue/enable=true – quiet BOOT_IMAGE=/install.386/vmlinuz
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore… done.
[ 0.000000] Enabling unmasked SIMD FPU exception support… done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1729.069 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 503832k/524032k available (1694k kernel code, 19632k reserved, 745k data, 320k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)
[ 0.004000] vmalloc : 0xe0800000 - 0xfffb1000 ( 503 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdffc0000 ( 511 MB)
[ 0.004000] .init : 0xc0364000 - 0xc03b4000 ( 320 kB)
[ 0.004000] .data : 0xc02a7b13 - 0xc0362000 ( 745 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02a7b13 (1694 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084068] Calibrating delay using timer specific routine… 3461.21 BogoMIPS (lpj=6922435)
[ 0.084096] Security Framework initialized
[ 0.084102] SELinux: Disabled at boot.
[ 0.084105] Capability LSM initialized
[ 0.084116] Mount-cache hash table entries: 512
[ 0.084228] Initializing cgroup subsys ns
[ 0.084232] Initializing cgroup subsys cpuacct
[ 0.084234] Initializing cgroup subsys devices
[ 0.084252] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084254] CPU: L2 cache: 2048K
[ 0.084261] CPU: Intel® Pentium® M processor 1.73GHz stepping 08
[ 0.084267] Checking ‘hlt’ instruction… OK.
[ 0.101831] Freeing SMP alternatives: 0k freed
[ 0.101833] ACPI: Core revision 20080321
[ 0.112371] ENABLING IO-APIC IRQs
[ 0.112552] …TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.156009] net_namespace: 652 bytes
[ 0.156009] Booting paravirtualized kernel on bare hardware
[ 0.156009] NET: Registered protocol family 16
[ 0.156009] EISA bus registered
[ 0.156009] ACPI: bus type pci registered
[ 0.156009] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.156009] PCI: MCFG area at e0000000 reserved in E820
[ 0.156009] PCI: Using MMCONFIG for extended config space
[ 0.156009] PCI: Using configuration type 1 for base access
[ 0.156009] Setting up standard PCI resources
[ 0.156010] ACPI: EC: Look up EC in DSDT
[ 0.160010] ACPI: Interpreter enabled
[ 0.160010] ACPI: (supports S0 S3 S4 S5)
[ 0.160010] ACPI: Using IOAPIC for interrupt routing
[ 0.161527] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.180724] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.180727] ACPI: EC: driver started in interrupt mode
[ 0.180830] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.181379] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.181385] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.181389] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.182009] PCI: Transparent bridge - 0000:00:1e.0
[ 0.182051] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PRT]
[ 0.182272] ACPI: PCI Interrupt Routing Table [_SB.PCI0.P0P1.PRT]
[ 0.182372] ACPI: PCI Interrupt Routing Table [_SB.PCI0.P0P2._PRT]
[ 0.184599] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11)
[ 0.184743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7)
[ 0.184884] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7)
[ 0.185025] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7) *0, disabled.
[ 0.185166] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7)
[ 0.185306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7)
[ 0.185449] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7)
[ 0.185590] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7)
[ 0.185740] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E7, should be BF [20080321]
[ 0.185750] Linux Plug and Play Support v0.97 © Adam Belay
[ 0.185776] pnp: PnP ACPI init
[ 0.185782] ACPI: bus type pnp registered
[ 0.189290] pnp: PnP ACPI: found 15 devices
[ 0.189293] ACPI: ACPI bus type pnp unregistered
[ 0.189296] PnPBIOS: Disabled by ACPI PNP
[ 0.189493] PCI: Using ACPI for IRQ routing
[ 0.189735] hpet clockevent registered
[ 0.189740] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.189744] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.190777] ACPI: RTC can wake from S4
[ 0.190799] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.190802] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.190805] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 0.190810] system 00:07: ioport range 0xfe00-0xfe01 has been reserved
[ 0.190813] system 00:07: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.190817] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.190820] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.190826] system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved
[ 0.190829] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.190839] system 00:0b: iomem range 0xff780000-0xffbfffff could not be reserved
[ 0.190842] system 00:0b: iomem range 0xffb80000-0xffffffff could not be reserved
[ 0.190848] system 00:0c: iomem range 0xffc00000-0xffb7ffff could not be reserved
[ 0.190854] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.190860] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.190863] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
[ 0.190866] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.190869] system 00:0e: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.221188] PCI: region 0000:02:01.0/9 too large: 0x0000000000000000-0x0000000003ffffff
[ 0.221194] PCI: Bridge: 0000:00:01.0
[ 0.221197] IO window: 9000-bfff
[ 0.221200] MEM window: 0xfe900000-0xfe9fffff
[ 0.221203] PREFETCH window: 0x00000000cff00000-0x00000000dfefffff
[ 0.221213] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[ 0.221215] IO window: 0x0000c000-0x0000c0ff
[ 0.221220] IO window: 0x0000c400-0x0000c4ff
[ 0.221224] MEM window: 0x34000000-0x37ffffff
[ 0.221229] PCI: Bridge: 0000:00:1e.0
[ 0.221232] IO window: c000-cfff
[ 0.221237] MEM window: 0xfea00000-0xfeafffff
[ 0.221241] PREFETCH window: 0x0000000030000000-0x00000000300fffff
[ 0.221256] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.221262] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.221272] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.221287] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 0.221305] NET: Registered protocol family 2
[ 0.221372] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.221533] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.221627] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.221680] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.221682] TCP reno registered
[ 0.221727] NET: Registered protocol family 1
[ 0.221825] checking if image is initramfs…<7>Switched to high resolution mode on CPU 0
[ 0.726455] it is
[ 1.267021] Freeing initrd memory: 11958k freed
[ 1.267599] audit: initializing netlink socket (disabled)
[ 1.267617] type=2000 audit(1237565886.264:1): initialized
[ 1.267716] Total HugeTLB memory allocated, 0
[ 1.267787] VFS: Disk quotas dquot_6.5.1
[ 1.267812] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.267851] msgmni has been set to 1007
[ 1.267970] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.267973] io scheduler noop registered
[ 1.267975] io scheduler anticipatory registered
[ 1.267977] io scheduler deadline registered
[ 1.267991] io scheduler cfq registered (default)
[ 1.268098] pci 0000:01:00.0: Boot video device
[ 1.268193] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.268220] assign_interrupt_mode Found MSI capability
[ 1.268244] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.268279] Allocate Port Service[0000:00:01.0:pcie03]
[ 1.268569] vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 1875k, total 131008k
[ 1.268573] vesafb: mode is 800x600x16, linelength=1600, pages=135
[ 1.268575] vesafb: protected mode interface info at c000:59c3
[ 1.268578] vesafb: pmi: set display start = c00c5a31, set palette = c00c5a6b
[ 1.268580] vesafb: pmi: ports = b010 b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4
[ 1.268586] vesafb: scrolling: redraw
[ 1.268589] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.282339] Console: switching to colour frame buffer device 100x37
[ 1.295715] fb0: VESA VGA frame buffer device
[ 1.295776] isapnp: Scanning for PnP cards…
[ 1.606518] isapnp: No Plug & Play device found
[ 1.608547] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.610003] brd: module loaded
[ 1.610083] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.612337] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.612342] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.612542] mice: PS/2 mouse device common for all mice
[ 1.612645] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.612664] rtc0: alarms up to one month, y3k
[ 1.612747] EISA: Probing bus 0 at eisa.0
[ 1.612777] EISA: Detected 0 cards.
[ 1.612780] cpuidle: using governor ladder
[ 1.612782] cpuidle: using governor menu
[ 1.612787] No iBFT detected.
[ 1.613153] TCP cubic registered
[ 1.613156] NET: Registered protocol family 17
[ 1.613163] Using IPI Shortcut mode
[ 1.613257] registered taskstats version 1
[ 1.613391] rtc_cmos 00:02: setting system clock to 2009-03-20 16:18:07 UTC (1237565887)
[ 1.613550] Freeing unused kernel memory: 320k freed
[ 1.640176] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.733416] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.733443] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.733447] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.752527] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.752971] ACPI: Thermal Zone [ATF0] (68 C)
[ 1.973171] usbcore: registered new interface driver usbfs
[ 1.973196] usbcore: registered new interface driver hub
[ 1.973225] usbcore: registered new device driver usb
[ 1.974141] USB Universal Host Controller Interface driver v3.0
[ 1.974182] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.974193] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.974197] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.974308] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.974337] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
[ 1.974404] usb usb1: configuration #1 chosen from 1 choice
[ 1.974430] hub 1-0:1.0: USB hub found
[ 1.974436] hub 1-0:1.0: 2 ports detected
[ 2.076116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.076120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.076123] usb usb1: Product: UHCI Host Controller
[ 2.076125] usb usb1: Manufacturer: Linux 2.6.26-1-486 uhci_hcd
[ 2.076128] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.076191] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 2.076202] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.076206] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.076228] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.076259] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000dc00
[ 2.076330] usb usb2: configuration #1 chosen from 1 choice
[ 2.076356] hub 2-0:1.0: USB hub found
[ 2.076361] hub 2-0:1.0: 2 ports detected
[ 2.090449] Uniform Multi-Platform E-IDE driver
[ 2.090453] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.101315] No dock devices found.
[ 2.108928] SCSI subsystem initialized
[ 2.136038] libata version 3.00 loaded.
[ 2.180234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.180239] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.180242] usb usb2: Product: UHCI Host Controller
[ 2.180244] usb usb2: Manufacturer: Linux 2.6.26-1-486 uhci_hcd
[ 2.180246] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.180298] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 20 (level, low) -> IRQ 20
[ 2.180309] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.180313] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.180335] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.180367] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e000
[ 2.180441] usb usb3: configuration #1 chosen from 1 choice
[ 2.180469] hub 3-0:1.0: USB hub found
[ 2.180475] hub 3-0:1.0: 2 ports detected
[ 2.231559] Marking TSC unstable due to: TSC halts in idle.
[ 2.286960] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.286964] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.286967] usb usb3: Product: UHCI Host Controller
[ 2.286969] usb usb3: Manufacturer: Linux 2.6.26-1-486 uhci_hcd
[ 2.286971] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.287029] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21
[ 2.287039] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.287043] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.287066] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.287099] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e080
[ 2.287171] usb usb4: configuration #1 chosen from 1 choice
[ 2.287198] hub 4-0:1.0: USB hub found
[ 2.287203] hub 4-0:1.0: 2 ports detected
[ 2.317000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 2.388089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.388093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.388095] usb usb4: Product: UHCI Host Controller
[ 2.388098] usb usb4: Manufacturer: Linux 2.6.26-1-486 uhci_hcd
[ 2.388100] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.388229] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.388242] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.388246] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.388266] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.392168] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.392174] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.392179] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
[ 2.418555] input: PS/2 Mouse as /class/input/input1
[ 2.440019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.440079] usb usb5: configuration #1 chosen from 1 choice
[ 2.440106] hub 5-0:1.0: USB hub found
[ 2.440112] hub 5-0:1.0: 8 ports detected
[ 2.446972] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
[ 2.544089] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.544093] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.544096] usb usb5: Product: EHCI Host Controller
[ 2.544098] usb usb5: Manufacturer: Linux 2.6.26-1-486 ehci_hcd
[ 2.544100] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.544742] ICH6: IDE controller (0x8086:0x266f rev 0x03) at PCI slot 0000:00:1f.1
[ 2.544754] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.544764] ICH6: not 100% native mode: will probe irqs later
[ 2.544778] ide0: BM-DMA at 0xffa0-0xffa7
[ 2.544786] ide1: BM-DMA at 0xffa8-0xffaf
[ 2.544790] Probing IDE interface ide0…
[ 2.688017] Clocksource tsc unstable (delta = -350802984 ns)
[ 2.836017] usb 1-1: device not accepting address 2, error -71
[ 2.892040] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3.280245] hda: SONY DVD RW DW-Q58A, ATAPI CD/DVD-ROM drive
[ 3.388023] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 3.521145] usb 5-1: configuration #1 chosen from 1 choice
[ 3.521347] usb 5-1: New USB device found, idVendor=1058, idProduct=0704
[ 3.521350] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.521353] usb 5-1: Product: External HDD
[ 3.521355] usb 5-1: Manufacturer: Western Digital
[ 3.521357] usb 5-1: SerialNumber: 575845373038483333313633
[ 3.952047] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.952152] hda: UDMA/33 mode selected
[ 3.952271] Probing IDE interface ide1…
[ 4.184021] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 4.358114] usb 1-2: configuration #1 chosen from 1 choice
[ 4.360646] usb 1-2: New USB device found, idVendor=046d, idProduct=c50a
[ 4.360646] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.360646] usb 1-2: Product: USB Receiver
[ 4.360646] usb 1-2: Manufacturer: Logitech
[ 4.520057] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.520530] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.520717] Yenta: CardBus bridge found at 0000:02:01.0 [104d:818f]
[ 4.520738] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[ 4.520740] IO window: 0x0000c000-0x0000c0ff
[ 4.520744] IO window: 0x0000c400-0x0000c4ff
[ 4.520749] PREFETCH window: 0x30020000-0x3003ffff
[ 4.520754] MEM window: 0x34000000-0x37ffffff
[ 4.520761] Yenta: Enabling burst memory read transactions
[ 4.520766] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 4.520768] Yenta: Routing CardBus interrupts to PCI
[ 4.520773] Yenta TI: socket 0000:02:01.0, mfunc 0x01001b22, devctl 0x64
[ 4.520808] ahci 0000:00:1f.2: version 3.0
[ 4.520829] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 4.544182] Initializing USB Mass Storage driver…
[ 4.600022] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 4.752769] Yenta: ISA IRQ mask 0x0cf8, PCI irq 21
[ 4.752773] Socket status: 30000006
[ 4.752775] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 4.752780] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[ 4.752785] cs: IO port probe 0xc000-0xcfff: clean.
[ 4.752978] pcmcia: parent PCI bridge Memory window: 0xfea00000 - 0xfeafffff
[ 4.752980] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x300fffff
[ 4.753184] ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 23 (level, low) -> IRQ 23
[ 4.802953] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[feafe800-feafefff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.852058] usb 4-2: configuration #1 chosen from 1 choice
[ 4.855499] usb 4-2: New USB device found, idVendor=044e, idProduct=300c
[ 4.855499] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.855499] usb 4-2: Product: UGX
[ 4.855499] usb 4-2: Manufacturer: ALPS
[ 4.855499] usbcore: registered new interface driver hiddev
[ 4.855499] scsi0 : SCSI emulation for USB Mass Storage devices
[ 4.855499] usbcore: registered new interface driver usb-storage
[ 4.855499] USB Mass Storage support registered.
[ 4.855499] usb-storage: device found at 2
[ 4.855499] usb-storage: waiting for device to settle before scanning
[ 4.873695] input: Logitech USB Receiver as /class/input/input3
[ 4.890525] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
[ 4.890547] usbcore: registered new interface driver usbhid
[ 4.890550] usbhid: v2.6:USB HID core driver
[ 5.065981] cs: IO port probe 0x100-0x3af: clean.
[ 5.067384] cs: IO port probe 0x3e0-0x4ff: clean.
[ 5.067755] cs: IO port probe 0x820-0x8ff: clean.
[ 5.068068] cs: IO port probe 0xc00-0xcf7: clean.
[ 5.068630] cs: IO port probe 0xa00-0xaff: clean.
[ 5.524038] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode
[ 5.524042] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 5.524048] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.524186] scsi1 : ahci
[ 5.524360] scsi2 : ahci
[ 5.524491] scsi3 : ahci
[ 5.524622] scsi4 : ahci
[ 5.524711] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 17
[ 5.524714] ata2: DUMMY
[ 5.524717] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 17
[ 5.524720] ata4: DUMMY
[ 5.844031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.845220] ata1.00: ATA-7: HTS541080G9SA00, MB4OC60D, max UDMA/100
[ 5.845223] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (not used)
[ 5.846646] ata1.00: configured for UDMA/100
[ 6.072130] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460300f1239a]
[ 6.180028] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.196126] scsi 1:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5
[ 6.213899] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 6.213906] Uniform CD-ROM driver Revision: 3.20
[ 6.223971] Driver ‘sd’ needs updating - please use bus_type methods
[ 6.224603] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 6.224623] sd 1:0:0:0: [sda] Write Protect is off
[ 6.224626] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.224655] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 6.224715] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 6.224732] sd 1:0:0:0: [sda] Write Protect is off
[ 6.224735] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.224764] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 6.224768] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 6.636032] sd 1:0:0:0: [sda] Attached SCSI disk
[ 9.856145] usb-storage: device scan complete
[ 9.856757] scsi 0:0:0:0: Direct-Access WD 1600BEV External 1.05 PQ: 0 ANSI: 4
[ 9.867858] sd 0:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 9.868730] sd 0:0:0:0: [sdb] Write Protect is off
[ 9.868735] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 9.868737] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 9.869727] sd 0:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 9.870602] sd 0:0:0:0: [sdb] Write Protect is off
[ 9.870606] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 9.870608] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 9.870612] sdb: sdb1
[ 13.424055] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 15.658580] ide_generic: please use “probe_mask=0x3f” module parameter for probing all legacy ISA IDE ports
[ 15.658590] ide_generic: I/O resource 0x1F0-0x1F7 not free.
[ 15.658593] ide_generic: I/O resource 0x170-0x177 not free.
[ 18.645495] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 18.804904] ISO 9660 Extensions: RRIP_1991A
[ 58.076496] ieee80211_crypt: registered algorithm ‘NULL’
[ 58.078370] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 58.078374] ieee80211: Copyright © 2004-2005 Intel Corporation jketreno@linux.intel.com
[ 58.081244] ipw2200: Intel® PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 58.081249] ipw2200: Copyright© 2003-2006 Intel Corporation
[ 58.081324] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 58.086258] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 58.086300] firmware: requesting ipw2200-bss.fw
[ 58.211610] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[ 58.211617] ipw2200: Unable to load firmware: -2
[ 58.211621] ipw2200: failed to register network device
[ 58.211674] ACPI: PCI interrupt for device 0000:02:02.0 disabled
[ 58.211685] ipw2200: probe of 0000:02:02.0 failed with error -5
[ 58.211730] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 58.211754] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 58.211994] eth0: RTL8169sb/8110sb at 0xe0a74400, 00:01:4a:bf:22:9f, XID 10000000 IRQ 17
[ 58.275561] eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
[ 129.948925] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 129.956189] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.001974] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.045474] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.054576] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.063205] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.068670] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.074222] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.085140] attempt to access beyond end of device
[ 130.085146] sda3: rw=0, want=66, limit=2
[ 130.085149] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[ 130.085309] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.086488] attempt to access beyond end of device
[ 130.086493] sda3: rw=0, want=66, limit=2
[ 130.086496] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[ 130.086652] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.096322] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.105075] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.483383] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.496803] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.520714] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.530799] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.579474] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 130.622975] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.736824] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.742270] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.789976] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.833476] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.842552] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.851150] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.856621] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.871075] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.873153] attempt to access beyond end of device
[ 135.873158] sda3: rw=0, want=66, limit=2
[ 135.873161] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[ 135.873321] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.874494] attempt to access beyond end of device
[ 135.874499] sda3: rw=0, want=66, limit=2
[ 135.874502] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[ 135.874657] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.884267] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.892629] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.902767] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.912485] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.917936] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.923375] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 135.975474] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 136.018976] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 139.040025] floppy0: no floppy controllers found
[ 141.101003] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.110771] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.155973] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.199474] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.208029] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.217715] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.226979] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.232438] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.232455] attempt to access beyond end of device
[ 141.232455] sda3: rw=0, want=66, limit=2
[ 141.232455] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[ 141.232455] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.240460] attempt to access beyond end of device
[ 141.240464] sda3: rw=0, want=66, limit=2
[ 141.240467] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[ 141.240623] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.250395] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.257166] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.268588] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.277721] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.287439] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.295053] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.339974] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 141.383475] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.495597] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.501020] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.549974] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.593475] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.603160] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.608609] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.622107] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.630725] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.633925] attempt to access beyond end of device
[ 146.633930] sda3: rw=0, want=66, limit=2
[ 146.633934] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[ 146.634090] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.635266] attempt to access beyond end of device
[ 146.635272] sda3: rw=0, want=66, limit=2
[ 146.635275] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[ 146.635430] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.645082] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.652220] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.662592] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.671199] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.676638] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.690181] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.734976] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 146.778475] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 149.796029] floppy0: no floppy controllers found
[ 151.797485] ieee80211_crypt: unregistered algorithm ‘NULL’
[ 151.801484] ieee80211_crypt: registered algorithm ‘NULL’
[ 151.803626] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 151.803630] ieee80211: Copyright © 2004-2005 Intel Corporation jketreno@linux.intel.com
[ 151.806226] ipw2200: Intel® PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 151.806230] ipw2200: Copyright© 2003-2006 Intel Corporation
[ 151.806293] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 151.806746] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 151.806785] firmware: requesting ipw2200-bss.fw
[ 151.809203] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[ 151.809208] ipw2200: Unable to load firmware: -2
[ 151.809211] ipw2200: failed to register network device
[ 151.809259] ACPI: PCI interrupt for device 0000:02:02.0 disabled
[ 151.809267] ipw2200: probe of 0000:02:02.0 failed with error -5
[ 179.392787] r8169: eth0: link down
[ 180.451772] r8169: eth0: link down
[ 191.468115] JFS: nTxBlock = 4033, nTxLock = 32268
[ 191.486510] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 191.487332] SGI XFS Quota Management subsystem
[ 191.516058] md: raid0 personality registered for level 0
[ 191.520677] md: raid1 personality registered for level 1
[ 191.538765] xor: automatically using best checksumming function: pIII_sse
[ 191.556007] pIII_sse : 4492.000 MB/sec
[ 191.556009] xor: using function: pIII_sse (4492.000 MB/sec)
[ 191.557276] async_tx: api initialized (async)
[ 191.628013] raid6: int32x1 568 MB/s
[ 191.696078] raid6: int32x2 705 MB/s
[ 191.764019] raid6: int32x4 537 MB/s
[ 191.832065] raid6: int32x8 472 MB/s
[ 191.900027] raid6: mmxx1 1727 MB/s
[ 191.968011] raid6: mmxx2 2021 MB/s
[ 192.036008] raid6: sse1x1 1295 MB/s
[ 192.104040] raid6: sse1x2 2094 MB/s
[ 192.172023] raid6: sse2x1 2300 MB/s
[ 192.240028] raid6: sse2x2 2559 MB/s
[ 192.240030] raid6: using algorithm sse2x2 (2559 MB/s)
[ 192.240034] md: raid6 personality registered for level 6
[ 192.240036] md: raid5 personality registered for level 5
[ 192.240038] md: raid4 personality registered for level 4
[ 192.270170] device-mapper: uevent: version 1.0.3
[ 192.270677] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 196.002969] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 196.003304] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 300.092036] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 300.092048] ata1.00: cmd ca/00:08:60:1b:c5/00:00:00:00:00/e8 tag 0 dma 4096 out
[ 300.092050] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 300.092053] ata1.00: status: { DRDY }
[ 300.092063] ata1: hard resetting link
[ 300.804031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 300.806649] ata1.00: configured for UDMA/100
[ 300.806660] ata1: EH complete
[ 300.806924] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 300.807042] sd 1:0:0:0: [sda] Write Protect is off
[ 300.807047] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 300.807282] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 375.088032] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 375.088043] ata1.00: cmd ca/00:08:10:1c:c5/00:00:00:00:00/e8 tag 0 dma 4096 out
[ 375.088044] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 375.088048] ata1.00: status: { DRDY }
[ 375.088058] ata1: hard resetting link
[ 375.800031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 375.802647] ata1.00: configured for UDMA/100
[ 375.802658] ata1: EH complete
[ 375.803021] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 375.803174] sd 1:0:0:0: [sda] Write Protect is off
[ 375.803179] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 375.803598] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 740.092033] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 740.092044] ata1.00: cmd ca/00:10:38:1c:c9/00:00:00:00:00/e8 tag 0 dma 8192 out
[ 740.092045] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 740.092049] ata1.00: status: { DRDY }
[ 740.092059] ata1: hard resetting link
[ 740.748030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 740.750642] ata1.00: configured for UDMA/100
[ 740.750653] ata1: EH complete
[ 740.750940] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 740.751057] sd 1:0:0:0: [sda] Write Protect is off
[ 740.751061] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 740.751336] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 780.092034] ata1: limiting SATA link speed to 1.5 Gbps
[ 780.092042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 780.092049] ata1.00: cmd ca/00:08:68:1a:9d/00:00:00:00:00/e8 tag 0 dma 4096 out
[ 780.092051] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 780.092054] ata1.00: status: { DRDY }
[ 780.092065] ata1: hard resetting link
[ 780.748029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 780.750645] ata1.00: configured for UDMA/100
[ 780.750656] ata1: EH complete
[ 780.750945] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 780.751065] sd 1:0:0:0: [sda] Write Protect is off
[ 780.751070] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 780.751429] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 811.152035] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 811.152046] ata1.00: cmd ca/00:10:30:1d:b1/00:00:00:00:00/e8 tag 0 dma 8192 out
[ 811.152048] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 811.152051] ata1.00: status: { DRDY }
[ 811.152061] ata1: hard resetting link
[ 811.808031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 811.810645] ata1.00: configured for UDMA/100
[ 811.810655] ata1: EH complete
[ 811.810942] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 811.811064] sd 1:0:0:0: [sda] Write Protect is off
[ 811.811068] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 812.191125] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
lspci et lsusb sur l’installation qui fonctionne
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon Mobility X600]
02:01.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
02:01.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
02:01.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Bus 005 Device 002: ID 1058:0704 Western Digital Technologies, Inc.
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 044e:300c Alps Electric Co., Ltd Bluetooth Controller (ALPS/UGPZ6)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 046d:c50a Logitech, Inc. Cordless Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
