Drivers ETHERNET Dell 510

:blush: Bonjour

J ai installer sur ma dell la dernière version Squeeze DEBIAN.J ai reussi pour la wiffi a installer le pilote mais impossible de faire fonctionner le mode ethernet.
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
02:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller
02:01.2 FireWire (IEEE 1394): Texas Instruments Device 8037

Apparememt le pilote est biem present

ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:14:22:cd:bb:c6
inet adr:192.168.0.10 Bcast:192.168.0.255 Masque:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interruption:18

eth1 Link encap:Ethernet HWaddr 00:16:6f:4a:28:bc
inet adr:192.168.0.16 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::216:6fff:fe4a:28bc/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7656 errors:0 dropped:0 overruns:0 frame:0
TX packets:6805 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:7338001 (6.9 MiB) TX bytes:2477614 (2.3 MiB)
Interruption:17 Adresse de base:0x6000 Mémoire:dfdf9000-dfdf9fff

lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:776 errors:0 dropped:0 overruns:0 frame:0
TX packets:776 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:308882 (301.6 KiB) TX bytes:308882 (301.6 KiB)

Avez-vous une ideedu probleme

Ps//je suis en qwerty ,excusez moi pour les accents .

FRED

Tes 2 connexions eth ont une adresse ip, c’est déja un bon début.
Je trouve étrange que les adresses soient sur le même réseau, mais je ne maîtrise pas assez pour dire si c’est bien ou pas (moi je tenterai pas).
qu’est ce qui ne marche pas exactement ?