Bonjour,
Je me bats avec un serveur dédié depuis sont installation, à cause de divers problèmes. Il est sous Debian, et j’ai récemment installé VNC (via vnc4server) pour y accéder à distance, sachant qu’aucun écran n’y sera connecté, et qu’il sera utilisé en LAN (pour contenir des outils PHP). Le problème, c’est qu’il se met en 800600 par défaut sans écran, et impossible d’augmenter la résolution. J’ai essayé d’utiliser NX server, mais vu l’absence de guide clair, impossible pour moi d’arriver à le faire marcher correctement.
Je me suis donc rabattu sur VNC, et voulait modifier le xorg.conf pour forcer du 1024768. Or, impossible, le xorg.conf n’existe pas. J’ai trouvé un petit guide expliquant comment en générer un, en passant en tty, ce que j’ai fait. Sauf que bam, écran noir (j’ai un écran temporaire branché dessus). Idem pour tty1 à tty7, et impossible de repasser à l’affichage graphique avec ctrl alt F8, ni les autres Fn. L’écran reste noir, obligé de rebooter.
Voici mon fichier inittab :
[code]root@X31:/etc/X11# cat /etc/inittab
/etc/inittab: init(8) configuration.
$Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
The default runlevel.
id:2:initdefault:
Boot-time system configuration/initialization script.
This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
What to do in single-user mode.
~~:S:wait:/sbin/sulogin
/etc/init.d executes the S and K scripts upon change
of runlevel.
Runlevel 0 is halt.
Runlevel 1 is single-user.
Runlevels 2-5 are multi-user.
Runlevel 6 is reboot.
l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6
Normally not reached, but fallthrough in case of emergency.
z6:6:respawn:/sbin/sulogin
What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
Action on special keypress (ALT-UpArrow).
#kb::kbrequest:/bin/echo “Keyboard Request–edit /etc/inittab to let this work.”
What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop
/sbin/getty invocations for the runlevels.
The “id” field MUST be the same as the last
characters of the device (after “tty”).
Format:
:::
Note that on most Debian systems tty7 is used by the X Window System,
so if you want to add more getty’s go ahead but skip tty7 if you run X.
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
Example how to put a getty on a serial line (for a terminal)
#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
Example how to put a getty on a modem line.
#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
[/code]
Une idée d’où vient le problème ?
Merci d’avance.
