Bonjour à tous
Je rencontre un problème lorsque j’essaye de graver un dvd, j’obtiens un message d’erreur au bout de quelques temps quelque soit le logiciel que j’utilise pour la gravure. Je vous met ci-dessous les différents messages obtenus:
-avec gnomebaker:[ul]Executing ‘builtin_dd if=/home/malfosse/telechargements/7.2-RELEASE-amd64-dvd1.iso of=/dev/hdc obs=32k seek=0’
/dev/hdc: “Current Write Speed” is 16.4x1352KBps.
:-[ WRITE@LBA=10h failed with SK=3h/POWER CALIBRATION AREA ERROR]: Input/output error
write failed: Input/output error
/dev/hdc: flushing cache
/dev/hdc: updating RMA
/dev/hdc: closing disc[/ul]
-avec brasero:[ul]BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs getting varg
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_get_input_type
BraseroGrowisofs got varg:
BraseroGrowisofs deactivating
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs getting varg
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_get_flags
BraseroGrowisofs called brasero_job_get_speed
BraseroGrowisofs called brasero_job_get_device
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_get_session_output_size
BraseroGrowisofs called brasero_job_get_input_type
BraseroGrowisofs called brasero_job_get_fd_in
BraseroGrowisofs called brasero_job_get_current_track
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs got varg:
growisofs
-use-the-force-luke=notray
-use-the-force-luke=dao
-dvd-compat
-speed=16
-use-the-force-luke=tracksize:1224109
-use-the-force-luke=tty
-Z
/dev/hdc=/home/malfosse/telechargements/7.2-RELEASE-amd64-dvd1.iso
BraseroGrowisofs launching command
BraseroGrowisofs called brasero_job_get_fd_out
BraseroGrowisofs stdout: Executing 'builtin_dd if=/home/malfosse/telechargements/7.2-RELEASE-amd64-dvd1.iso of=/dev/hdc obs=32k seek=0’
BraseroGrowisofs called brasero_job_set_dangerous
BraseroGrowisofs stderr: /dev/hdc: engaging DVD-R DAO upon user request…
BraseroGrowisofs stderr: :-[ PERFORM OPC failed with SK=5h/COMMAND SEQUENCE ERROR]: Input/output error
BraseroGrowisofs stderr: /dev/hdc: reserving 1224109 blocks
BraseroGrowisofs stderr: /dev/hdc: “Current Write Speed” is 16.4x1352KBps.
BraseroGrowisofs stdout: 32768/2506975232 ( 0.0%) @0.0x, remaining 7650:34 RBU 100.0% UBU -100.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_written_session
BraseroGrowisofs called brasero_job_set_rate
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs called brasero_job_start_progress
BraseroGrowisofs stdout: 32768/2506975232 ( 0.0%) @0.0x, remaining 12750:58 RBU 100.0% UBU 100.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_written_session
BraseroGrowisofs called brasero_job_set_rate
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs called brasero_job_start_progress
BraseroGrowisofs stdout: 32768/2506975232 ( 0.0%) @0.0x, remaining 16576:15 RBU 100.0% UBU 100.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_written_session
BraseroGrowisofs called brasero_job_set_rate
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs called brasero_job_start_progress
BraseroGrowisofs stdout: 32768/2506975232 ( 0.0%) @0.0x, remaining 20401:33 RBU 100.0% UBU 100.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_written_session
BraseroGrowisofs called brasero_job_set_rate
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs called brasero_job_start_progress
BraseroGrowisofs stdout: 32768/2506975232 ( 0.0%) @0.0x, remaining 25501:56 RBU 100.0% UBU 100.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_written_session
BraseroGrowisofs called brasero_job_set_rate
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs called brasero_job_start_progress
BraseroGrowisofs stderr: :-[ WRITE@LBA=10h failed with SK=3h/POWER CALIBRATION AREA ERROR]: Input/output error
BraseroGrowisofs stderr: write failed: Input/output error
BraseroGrowisofs called brasero_job_error
BraseroGrowisofs finished with an error
BraseroGrowisofs asked to stop because of an error
error = 1
message = "Erreur non gérée, abandon"
BraseroGrowisofs stopping
BraseroGrowisofs got killed
BraseroGrowisofs stderr: /dev/hdc: flushing cache
BraseroGrowisofs called brasero_job_set_progress
BraseroGrowisofs called brasero_job_set_current_action
Session error : Erreur non gérée, abandon (brasero_burn_record burn.c:2369)
[/ul]
Mon graveur est un plextor px-716a, lorsque que je fais un wodim -checkdrive dev=/dev/hdc j’obtiens :
[ul]Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identification : 'DVDR PX-716A '
Revision : '1.10’
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
[/ul]
Le graveur ne semble supporter que SAO alors qu’il devrait supporter d’autres modes de gravure, cela peut il être la cause de mon problème? Si quelqu’un avait une petite piste ca serait super cela fait bientot un mois que je m’arrache les cheveux sur ce problème et la calvitie me va pas trop 
La gravure de cd ainsi que la lecture de dvd par contre fonctionne parfaitement.
Cordialement