Salut à tous,
Je suis actuellement sous Debian Wheezy.
Les outils dont j’avais besoin fonctionnent (kdenlive, 2mandvd) mais un outil principale me manque encore : Heimdall.
Une version est présente dans les dépôts de SID, je l’ai donc installée mais elle ne fonctionne pas je suis bloqué à :
[code]Heimdall v1.4 RC1
Copyright © 2010-2012, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection…
Detecting device…
Manufacturer: "SAMSUNG"
Product: “Gadget Serial”
length: 18
device class: 2
S/N: 0
VID:PID: 04E8:685D
bcdDevice: 021B
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 83
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 02
max packet size: 0200
polling interval: 00
Claiming interface…
Setting up interface…
Checking if protocol is initialised…
ERROR: libusb error -7 whilst receiving packet.
Protocol is not initialised.
Initialising protocol…
ERROR: Failed to receive handshake response. Retrying…
ERROR: Failed to receive handshake response. Retrying…
ERROR: Failed to receive handshake response. Retrying…
ERROR: Failed to receive handshake response. Retrying…
ERROR: Failed to receive handshake response.
ERROR: Protocol initialisation failed!
Releasing device interface…
[/code]
J’ai tenté l’install de différentes versions de libusb-1.0-0, libusb-1.0-0-dev, libusb-dev, etc … mais impossible de trouver un moyen de faire fonctionner Heimdall. J’ai même tenté une compilation depuis les sources mais rien à faire la bête n’en veut pas.
Help Me Please, si quelqu’un a une idée je suis preneur.
P.S : Il me semble qu’à travers mes divers tests, le protocole se soit initialisé 1 fois mais je ne sais plus comment.