Bonjour,
j’ai un Canon 350D que je branchais en USB pour récupérer les photos mais un beau jour (j’y suis certainement pour quelque chose), il n’a plus voulu. Voilà le message d’erreur qui s’affiche à l’ordi.
Le reflex, lui, clignote “busy” tant que je ne l’éteins pas.
Salut,
[quote=“blaisoth”]Bonjour,
j’ai un Canon 350D que je branchais en USB pour récupérer les photos mais un beau jour (j’ai suis certainement pour quelque chose), il n’a plus voulu. Voilà le message d’erreur qui s’affiche à l’ordi.
Le reflex, lui, clignote “busy” tant que je ne l’éteins pas.[/quote]
Tu n’aurais pas une piste pour nous aider un peu ???
Ça fait longtemps ? Te souviens-tu d’avoir fait une mise à jour avant, d’avoir installé un programme, d’avoir modifié tes appartenances groupes ? Quelques infos quoi…
As-tu regardé les sorties de dmesg et de lspci ?
salut
debian:/home/eric# dpkg -l |grep firmware
ii firmware-linux-free 2.6.32-15~bpo50+1 Binary firmware for various drivers in the Linux kernel
# uname -a
Linux debian 2.6.32-bpo.5-amd64 #1 SMP Fri Jun 11 08:42:31 UTC 2010 x86_64 GNU/Linux
# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
02:00.0 Network controller: Atheros Communications Inc. Device 002b (rev 01)
03:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
[/quote][code][ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-bpo.5-amd64 (Debian 2.6.32-15~bpo50+1) (norbert@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jun 11 08:42:31 UTC 2010
[ 0.000000] Command line: root=UUID=b7dc8d46-12ea-40ef-94e8-f14f25506499 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
[ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdd80000 (usable)
[ 0.000000] BIOS-e820: 00000000bdd80000 - 00000000bdd8f000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdd8f000 - 00000000bdde0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdde0000 - 00000000bde00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbdd80 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdd80000
[ 0.000000] 0000000000 - 00bdc00000 page 2M
[ 0.000000] 00bdc00000 - 00bdd80000 page 4k
[ 0.000000] kernel direct mapping tables up to bdd80000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000
[ 0.000000] RAMDISK: 3789c000 - 37fefebc
[ 0.000000] ACPI: RSDP 00000000000f93e0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bdd80100 00084 (v01 _ASUS_ Notebook 20091204 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bdd80290 000F4 (v03 120409 FACP1202 20091204 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bdd80680 0CEB5 (v01 K50IJ K50IJ217 00000217 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bdd8f000 00040
[ 0.000000] ACPI: APIC 00000000bdd80390 0005C (v01 120409 APIC1202 20091204 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bdd80430 0003C (v01 120409 OEMMCFG 20091204 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000bdd80470 00176 (v01 _ASUS_ Notebook 20091204 MSFT 00000097)
[ 0.000000] ACPI: ECDT 00000000bdd80620 00054 (v01 120409 OEMECDT 20091204 MSFT 00000097)
[ 0.000000] ACPI: DBGP 00000000bdd803f0 00034 (v01 120409 DBGP1202 20091204 MSFT 00000097)
[ 0.000000] ACPI: BOOT 00000000bdd805f0 00028 (v01 120409 BOOT1202 20091204 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bdd8f040 00071 (v01 120409 OEMB1202 20091204 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bdd8d540 00038 (v01 120409 OEMHPET 20091204 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000bdd8f0c0 02024 (v01 120409 GMCHSCI 20091204 MSFT 00000097)
[ 0.000000] ACPI: ATKG 00000000bdd912f0 08024 (v01 022008 OEMATKG 20080220 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bdd99e00 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000000014000 - 000000000001bfff]
[ 0.000000] bootmap [000000000001c000 - 0000000000043fff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000167c314] TEXT DATA BSS ==> [0001000000 - 000167c314]
[ 0.000000] #3 [003789c000 - 0037fefebc] RAMDISK ==> [003789c000 - 0037fefebc]
[ 0.000000] #4 [0000097c00 - 0000100000] BIOS reserved ==> [0000097c00 - 0000100000]
[ 0.000000] #5 [000167d000 - 000167d28e] BRK ==> [000167d000 - 000167d28e]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x000bdd80
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1039623
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 111 pages reserved
[ 0.000000] DMA zone: 3808 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 759224 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
[ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bdd80000 - 00000000bdd8f000
[ 0.000000] PM: Registered nosave memory: 00000000bdd8f000 - 00000000bdde0000
[ 0.000000] PM: Registered nosave memory: 00000000bdde0000 - 00000000bde00000
[ 0.000000] PM: Registered nosave memory: 00000000bde00000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bde00000 (gap: bde00000:40f20000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880005200000 s90008 r8192 d20584 u1048576
[ 0.000000] pcpu-alloc: s90008 r8192 d20584 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021592
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=b7dc8d46-12ea-40ef-94e8-f14f25506499 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000531d000 - ffff88000931d000
[ 0.000000] software IO TLB at phys 0x531d000 - 0x931d000
[ 0.000000] Memory: 4020388k/5242880k available (3060k kernel code, 1084388k absent, 138104k reserved, 1869k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.614 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.22 BogoMIPS (lpj=8778456)
[ 0.004035] Security Framework initialized
[ 0.004042] SELinux: Disabled at boot.
[ 0.008130] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010784] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012032] Mount-cache hash table entries: 256
[ 0.012243] Initializing cgroup subsys ns
[ 0.012249] Initializing cgroup subsys cpuacct
[ 0.012255] Initializing cgroup subsys devices
[ 0.012258] Initializing cgroup subsys freezer
[ 0.012262] Initializing cgroup subsys net_cls
[ 0.012298] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012302] CPU: L2 cache: 1024K
[ 0.012307] CPU 0/0x0 -> Node 0
[ 0.012311] CPU: Physical Processor ID: 0
[ 0.012313] CPU: Processor Core ID: 0
[ 0.012318] mce: CPU supports 6 MCE banks
[ 0.012329] CPU0: Thermal monitoring handled by SMI
[ 0.012334] using mwait in idle threads.
[ 0.012337] Performance Events: Core2 events, Intel PMU driver.
[ 0.012345] ... version: 2
[ 0.012348] ... bit width: 40
[ 0.012351] ... generic registers: 2
[ 0.012353] ... value mask: 000000ffffffffff
[ 0.012356] ... max period: 000000007fffffff
[ 0.012359] ... fixed-purpose events: 3
[ 0.012361] ... event mask: 0000000700000003
[ 0.014136] ACPI: Core revision 20090903
[ 0.040081] Setting APIC routing to flat
[ 0.040463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081426] CPU0: Intel Pentium(R) Dual-Core CPU T4400 @ 2.20GHz stepping 0a
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.168056] CPU1: Intel Pentium(R) Dual-Core CPU T4400 @ 2.20GHz stepping 0a
[ 0.168069] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172021] Brought up 2 CPUs
[ 0.172025] Total of 2 processors activated (8778.22 BogoMIPS).
[ 0.172559] CPU0 attaching sched-domain:
[ 0.172565] domain 0: span 0-1 level MC
[ 0.172568] groups: 0 1
[ 0.172578] CPU1 attaching sched-domain:
[ 0.172581] domain 0: span 0-1 level MC
[ 0.172585] groups: 1 0
[ 0.172703] devtmpfs: initialized
[ 0.179053] regulator: core version 0.5
[ 0.179053] NET: Registered protocol family 16
[ 0.179053] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.179053] ACPI: bus type pci registered
[ 0.179053] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.179053] PCI: Not using MMCONFIG.
[ 0.179053] PCI: Using configuration type 1 for base access
[ 0.180359] bio: create slab <bio-0> at 0
[ 0.181873] ACPI: EC: EC description table is found, configuring boot EC
[ 0.190203] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.196504] ACPI: BIOS _OSI(Linux) query ignored
[ 0.201889] ACPI: Interpreter enabled
[ 0.201898] ACPI: (supports S0 S3 S4 S5)
[ 0.201943] ACPI: Using IOAPIC for interrupt routing
[ 0.202117] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.208502] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.226583] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.246728] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.251413] ACPI Warning: Incorrect checksum in table [ATKG] - 6B, should be E5 (20090903/tbutils-314)
[ 0.251902] ACPI: No dock devices found.
[ 0.252869] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.252962] DMAR: Forcing write-buffer flush capability
[ 0.253012] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
[ 0.253022] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.253030] pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]
[ 0.253084] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe800000-0xfe8fffff]
[ 0.253237] pci 0000:00:1a.0: reg 20 io port: [0xd880-0xd89f]
[ 0.253354] pci 0000:00:1a.1: reg 20 io port: [0xd800-0xd81f]
[ 0.253471] pci 0000:00:1a.2: reg 20 io port: [0xd480-0xd49f]
[ 0.253589] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe9fbc00-0xfe9fbfff]
[ 0.253673] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.253680] pci 0000:00:1a.7: PME# disabled
[ 0.253752] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9f4000-0xfe9f7fff]
[ 0.253826] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.253833] pci 0000:00:1b.0: PME# disabled
[ 0.253949] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.253955] pci 0000:00:1c.0: PME# disabled
[ 0.254071] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.254077] pci 0000:00:1c.1: PME# disabled
[ 0.254199] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.254206] pci 0000:00:1c.5: PME# disabled
[ 0.254300] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
[ 0.254418] pci 0000:00:1d.1: reg 20 io port: [0xd080-0xd09f]
[ 0.254535] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
[ 0.254653] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe9fb800-0xfe9fbbff]
[ 0.254737] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.254743] pci 0000:00:1d.7: PME# disabled
[ 0.255045] pci 0000:00:1f.2: reg 10 io port: [0xcc00-0xcc07]
[ 0.255056] pci 0000:00:1f.2: reg 14 io port: [0xc880-0xc883]
[ 0.255066] pci 0000:00:1f.2: reg 18 io port: [0xc800-0xc807]
[ 0.255076] pci 0000:00:1f.2: reg 1c io port: [0xc480-0xc483]
[ 0.255086] pci 0000:00:1f.2: reg 20 io port: [0xc400-0xc41f]
[ 0.255097] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb000-0xfe9fb7ff]
[ 0.255155] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.255161] pci 0000:00:1f.2: PME# disabled
[ 0.255349] pci 0000:02:00.0: reg 10 64bit mmio: [0xfeaf0000-0xfeafffff]
[ 0.255445] pci 0000:02:00.0: supports D1
[ 0.255448] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.255456] pci 0000:02:00.0: PME# disabled
[ 0.255571] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.255660] pci 0000:03:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]
[ 0.255673] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.255762] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.255769] pci 0000:03:00.0: PME# disabled
[ 0.255816] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.255879] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
[ 0.255885] pci 0000:00:1c.5: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.255977] pci 0000:00:1e.0: transparent bridge
[ 0.256043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.256412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.256562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.300584] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.300855] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.301122] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.301384] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.301649] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.301913] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.302180] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.302446] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.302644] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.302665] vgaarb: loaded
[ 0.302726] PCI: Using ACPI for IRQ routing
[ 0.302726] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.302726] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.308026] Switching to clocksource tsc
[ 0.309934] pnp: PnP ACPI init
[ 0.309954] ACPI: bus type pnp registered
[ 0.314743] pnp: PnP ACPI: found 15 devices
[ 0.314746] ACPI: ACPI bus type pnp unregistered
[ 0.314764] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
[ 0.314779] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.314783] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.314788] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.314793] system 00:08: ioport range 0x500-0x57f has been reserved
[ 0.314798] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.314803] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.314808] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[ 0.314813] system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved
[ 0.314818] system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved
[ 0.314823] system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved
[ 0.314828] system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved
[ 0.314833] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.314839] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.314848] system 00:0a: iomem range 0xffa00000-0xffbfffff could not be reserved
[ 0.314854] system 00:0a: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.314862] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.314871] system 00:0c: ioport range 0x250-0x253 has been reserved
[ 0.314876] system 00:0c: ioport range 0x256-0x25f has been reserved
[ 0.314881] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.314886] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.314891] system 00:0c: iomem range 0xfec10000-0xfec17fff has been reserved
[ 0.314896] system 00:0c: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 0.314901] system 00:0c: iomem range 0xfec38000-0xfec3ffff has been reserved
[ 0.314909] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.314919] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.314923] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.314928] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.314933] system 00:0e: iomem range 0x100000-0xbddfffff could not be reserved
[ 0.319845] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.319849] pci 0000:00:1c.0: IO window: disabled
[ 0.319856] pci 0000:00:1c.0: MEM window: disabled
[ 0.319862] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.319873] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.319876] pci 0000:00:1c.1: IO window: disabled
[ 0.319885] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff
[ 0.319891] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.319901] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
[ 0.319907] pci 0000:00:1c.5: IO window: 0xe000-0xefff
[ 0.319915] pci 0000:00:1c.5: MEM window: 0xfeb00000-0xfebfffff
[ 0.319922] pci 0000:00:1c.5: PREFETCH window: 0x000000c0000000-0x000000c01fffff
[ 0.319933] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.319936] pci 0000:00:1e.0: IO window: disabled
[ 0.319944] pci 0000:00:1e.0: MEM window: disabled
[ 0.319950] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.319973] alloc irq_desc for 16 on node -1
[ 0.319976] alloc kstat_irqs on node -1
[ 0.319986] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.319993] pci 0000:00:1c.0: setting latency timer to 64
[ 0.320007] alloc irq_desc for 17 on node -1
[ 0.320009] alloc kstat_irqs on node -1
[ 0.320015] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.320022] pci 0000:00:1c.1: setting latency timer to 64
[ 0.320036] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.320042] pci 0000:00:1c.5: setting latency timer to 64
[ 0.320053] pci 0000:00:1e.0: setting latency timer to 64
[ 0.320060] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.320065] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.320070] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.320074] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.320078] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.320082] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xc01fffff]
[ 0.320086] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.320091] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.320138] NET: Registered protocol family 2
[ 0.320403] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.322271] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.327404] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.328040] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.328045] TCP reno registered
[ 0.328194] NET: Registered protocol family 1
[ 0.328224] pci 0000:00:02.0: Boot video device
[ 0.328501] Unpacking initramfs...
[ 0.674047] Freeing initrd memory: 7503k freed
[ 0.677970] Simple Boot Flag at 0x51 set to 0x1
[ 0.678464] audit: initializing netlink socket (disabled)
[ 0.678487] type=2000 audit(1282284106.675:1): initialized
[ 0.678963] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.681210] VFS: Disk quotas dquot_6.5.2
[ 0.681295] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.681413] msgmni has been set to 7866
[ 0.681703] alg: No test for stdrng (krng)
[ 0.681782] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.681786] io scheduler noop registered
[ 0.681790] io scheduler anticipatory registered
[ 0.681793] io scheduler deadline registered
[ 0.681842] io scheduler cfq registered (default)
[ 0.682029] alloc irq_desc for 24 on node -1
[ 0.682032] alloc kstat_irqs on node -1
[ 0.682050] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.682064] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.682244] alloc irq_desc for 25 on node -1
[ 0.682247] alloc kstat_irqs on node -1
[ 0.682259] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.682272] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.682448] alloc irq_desc for 26 on node -1
[ 0.682451] alloc kstat_irqs on node -1
[ 0.682463] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.682476] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.684919] Linux agpgart interface v0.103
[ 0.684942] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 0.685646] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.719975] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.720045] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.720701] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.720805] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.724622] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.726923] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.726934] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.726939] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.726943] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.726948] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.727065] mice: PS/2 mouse device common for all mice
[ 0.727125] rtc_cmos 00:03: RTC can wake from S4
[ 0.727186] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.727226] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.727247] cpuidle: using governor ladder
[ 0.727250] cpuidle: using governor menu
[ 0.727257] No iBFT detected.
[ 0.727754] TCP cubic registered
[ 0.727937] NET: Registered protocol family 10
[ 0.728633] lo: Disabled Privacy Extensions
[ 0.729082] Mobile IPv6
[ 0.729086] NET: Registered protocol family 17
[ 0.729213] PM: Resume from disk failed.
[ 0.729221] registered taskstats version 1
[ 0.729827] rtc_cmos 00:03: setting system clock to 2010-08-20 06:01:47 UTC (1282284107)
[ 0.729895] Initalizing network drop monitor service
[ 0.729931] Freeing unused kernel memory: 584k freed
[ 0.730150] Write protecting the kernel read-only data: 4192k
[ 0.768900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.945981] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.945994] ACPI: Thermal Zone [THRM] (32 C)
[ 1.384099] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.384118] ATL1E 0000:03:00.0: setting latency timer to 64
[ 1.398988] usbcore: registered new interface driver usbfs
[ 1.399023] usbcore: registered new interface driver hub
[ 1.417136] usbcore: registered new device driver usb
[ 1.594503] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.594566] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.594580] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.594586] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.594618] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.594669] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 1.594733] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.594738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.594741] usb usb1: Product: UHCI Host Controller
[ 1.594745] usb usb1: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd
[ 1.594748] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.594878] usb usb1: configuration #1 chosen from 1 choice
[ 1.594929] hub 1-0:1.0: USB hub found
[ 1.594939] hub 1-0:1.0: 2 ports detected
[ 1.595022] alloc irq_desc for 21 on node -1
[ 1.595025] alloc kstat_irqs on node -1
[ 1.595036] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.595047] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.595052] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.595070] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.595115] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 1.595167] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.595171] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.595175] usb usb2: Product: UHCI Host Controller
[ 1.595178] usb usb2: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd
[ 1.595182] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.595283] usb usb2: configuration #1 chosen from 1 choice
[ 1.595325] hub 2-0:1.0: USB hub found
[ 1.595335] hub 2-0:1.0: 2 ports detected
[ 1.595408] alloc irq_desc for 19 on node -1
[ 1.595411] alloc kstat_irqs on node -1
[ 1.595420] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.595430] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.595435] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.595447] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 1.595489] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 1.595543] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.595547] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.595551] usb usb3: Product: UHCI Host Controller
[ 1.595554] usb usb3: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd
[ 1.595557] usb usb3: SerialNumber: 0000:00:1a.2
[ 1.595649] usb usb3: configuration #1 chosen from 1 choice
[ 1.595694] hub 3-0:1.0: USB hub found
[ 1.595703] hub 3-0:1.0: 2 ports detected
[ 1.595774] alloc irq_desc for 23 on node -1
[ 1.595777] alloc kstat_irqs on node -1
[ 1.595785] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.595795] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.595800] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.595812] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.595854] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.595905] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.595910] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.595914] usb usb4: Product: UHCI Host Controller
[ 1.595917] usb usb4: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd
[ 1.595920] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.597534] usb usb4: configuration #1 chosen from 1 choice
[ 1.597585] hub 4-0:1.0: USB hub found
[ 1.597600] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.597604] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 1.598493] hub 4-0:1.0: 2 ports detected
[ 1.598613] alloc irq_desc for 18 on node -1
[ 1.598617] alloc kstat_irqs on node -1
[ 1.598628] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.598676] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.598681] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.598696] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
[ 1.598736] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.602622] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.602647] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 1.612478] SCSI subsystem initialized
[ 1.664073] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.664119] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.664123] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.664128] usb usb5: Product: EHCI Host Controller
[ 1.664131] usb usb5: Manufacturer: Linux 2.6.32-bpo.5-amd64 ehci_hcd
[ 1.664134] usb usb5: SerialNumber: 0000:00:1a.7
[ 1.664274] usb usb5: configuration #1 chosen from 1 choice
[ 1.664325] hub 5-0:1.0: USB hub found
[ 1.664339] hub 5-0:1.0: 6 ports detected
[ 1.664460] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.664473] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.664479] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.664495] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.664534] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 1.664592] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.664596] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.664600] usb usb6: Product: UHCI Host Controller
[ 1.664603] usb usb6: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd
[ 1.664606] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.664718] usb usb6: configuration #1 chosen from 1 choice
[ 1.664765] hub 6-0:1.0: USB hub found
[ 1.664778] hub 6-0:1.0: 2 ports detected
[ 1.664880] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.664930] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.664936] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.664959] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 1.665001] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.668906] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.712058] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 1.744023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.744071] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.744076] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.744080] usb usb7: Product: EHCI Host Controller
[ 1.744083] usb usb7: Manufacturer: Linux 2.6.32-bpo.5-amd64 ehci_hcd
[ 1.744087] usb usb7: SerialNumber: 0000:00:1d.7
[ 1.744214] usb usb7: configuration #1 chosen from 1 choice
[ 1.744265] hub 7-0:1.0: USB hub found
[ 1.744278] hub 7-0:1.0: 6 ports detected
[ 1.744385] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.744397] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.744403] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.744416] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.744454] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 1.744503] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.744507] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.744511] usb usb8: Product: UHCI Host Controller
[ 1.744514] usb usb8: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd
[ 1.744518] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.744608] usb usb8: configuration #1 chosen from 1 choice
[ 1.744650] hub 8-0:1.0: USB hub found
[ 1.744664] hub 8-0:1.0: 2 ports detected
[ 1.908095] libata version 3.00 loaded.
[ 1.913481] ahci 0000:00:1f.2: version 3.0
[ 1.913507] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.913587] alloc irq_desc for 27 on node -1
[ 1.913591] alloc kstat_irqs on node -1
[ 1.913608] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.913663] ahci: SSS flag set, parallel bus scan disabled
[ 1.913702] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.913709] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.913717] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.964034] scsi0 : ahci
[ 1.974159] scsi1 : ahci
[ 1.976051] usb 5-3: new high speed USB device using ehci_hcd and address 2
[ 2.008035] scsi2 : ahci
[ 2.046186] scsi3 : ahci
[ 2.046688] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 27
[ 2.046695] ata2: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb180 irq 27
[ 2.046698] ata3: DUMMY
[ 2.046701] ata4: DUMMY
[ 2.152174] usb 5-3: New USB device found, idVendor=04f2, idProduct=b071
[ 2.152180] usb 5-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.152184] usb 5-3: Product: CNF7129
[ 2.152187] usb 5-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.152191] usb 5-3: SerialNumber: SN0001
[ 2.152337] usb 5-3: configuration #1 chosen from 1 choice
[ 2.380055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.381743] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.381925] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.381930] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.382867] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60N, max UDMA/133
[ 2.382872] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.384765] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.384939] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.384945] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.385927] ata1.00: configured for UDMA/133
[ 2.400156] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[ 3.124027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.129900] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 3.129906] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.131111] ata2.00: ATAPI: Slimtype DVD A DS8A4S, JA22, max UDMA/100, ATAPI AN
[ 3.135818] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 3.135824] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.137374] ata2.00: configured for UDMA/100
[ 3.155899] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A4S JA22 PQ: 0 ANSI: 5
[ 3.192806] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.192892] sd 0:0:0:0: [sda] Write Protect is off
[ 3.192897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.192935] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.193206] sda:sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.199211] Uniform CD-ROM driver Revision: 3.20
[ 3.200092] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.220268] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 3.288316] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.307328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.307949] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.585388] PM: Starting manual resume from disk
[ 3.585394] PM: Resume from partition 8:7
[ 3.585396] PM: Checking hibernation image.
[ 3.585549] PM: Error -22 checking image file
[ 3.585552] PM: Resume from disk failed.
[ 3.626765] kjournald starting. Commit interval 5 seconds
[ 3.626774] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.977792] udevd version 125 started
[ 5.999358] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.244939] cfg80211: Using static regulatory domain info
[ 6.244944] cfg80211: Regulatory domain: US
[ 6.244946] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.244951] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.244956] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.244960] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.244965] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.244969] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.244973] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.244986] cfg80211: Calling CRDA for country: US
[ 6.404635] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 6.404653] ACPI: Sleep Button [SLPB]
[ 6.404734] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 6.407233] ACPI: Lid Switch [LID]
[ 6.407343] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.407352] ACPI: Power Button [PWRF]
[ 6.559934] ACPI: SSDT 00000000bdd993f0 00206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 6.560957] ACPI: SSDT 00000000bdd99690 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 6.596010] Monitor-Mwait will be used to enter C-1 state
[ 6.628027] Monitor-Mwait will be used to enter C-2 state
[ 6.667329] Monitor-Mwait will be used to enter C-3 state
[ 6.667346] Marking TSC unstable due to TSC halts in idle
[ 6.667517] processor LNXCPU:00: registered as cooling_device0
[ 6.668195] ACPI: SSDT 00000000bdd99320 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 6.668900] ACPI: SSDT 00000000bdd99600 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 6.717046] Switching to clocksource hpet
[ 6.774053] Linux video capture interface: v2.00
[ 6.797190] processor LNXCPU:01: registered as cooling_device1
[ 7.013508] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.013523] ath9k 0000:02:00.0: setting latency timer to 64
[ 7.039407] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 7.062204] input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb5/5-3/5-3:1.0/input/input6
[ 7.062280] usbcore: registered new interface driver uvcvideo
[ 7.062284] USB Video Class driver (v0.1.0)
[ 7.063511] ath: EEPROM regdomain: 0x60
[ 7.063515] ath: EEPROM indicates we should expect a direct regpair map
[ 7.063520] ath: Country alpha2 being used: 00
[ 7.063522] ath: Regpair used: 0x60
[ 7.249836] Asus Laptop ACPI Extras version 0.30
[ 7.267163] unsupported model K50IJ, trying default values
[ 7.267167] send /proc/acpi/dsdt to the developers
[ 7.338313] asus_laptop: Asus Laptop Support version 0.42
[ 7.349314] ACPI: AC Adapter [AC0] (off-line)
[ 7.416439] asus_laptop: K50IJ model detected
[ 7.418133] input: Asus Laptop extra buttons as /devices/virtual/input/input7
[ 7.447800] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 7.542497] ACPI: Battery Slot [BAT0] (battery present)
[ 7.812132] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input8
[ 8.488168] alloc irq_desc for 22 on node -1
[ 8.488173] alloc kstat_irqs on node -1
[ 8.488184] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.488275] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.902648] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 10.903687] Registered led device: ath9k-phy0::radio
[ 10.903720] Registered led device: ath9k-phy0::assoc
[ 10.903744] Registered led device: ath9k-phy0::tx
[ 10.903768] Registered led device: ath9k-phy0::rx
[ 10.903801] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xffffc90011360000, irq=17
[ 12.171110] Adding 11807732k swap on /dev/sda7. Priority:-1 extents:1 across:11807732k
[ 12.223599] EXT3 FS on sda1, internal journal
[ 13.231627] loop: module loaded
[ 13.538654] kjournald starting. Commit interval 5 seconds
[ 13.538866] EXT3 FS on sda9, internal journal
[ 13.538874] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.554743] kjournald starting. Commit interval 5 seconds
[ 13.554869] EXT3 FS on sda8, internal journal
[ 13.554876] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.581960] kjournald starting. Commit interval 5 seconds
[ 13.581982] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 13.582109] EXT3 FS on sda5, internal journal
[ 13.582114] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.592129] kjournald starting. Commit interval 5 seconds
[ 13.592263] EXT3 FS on sda6, internal journal
[ 13.592269] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.952180] RPC: Registered udp transport module.
[ 15.952184] RPC: Registered tcp transport module.
[ 15.952187] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.021013] Slow work thread pool: Starting up
[ 16.021083] Slow work thread pool: Ready
[ 16.021173] FS-Cache: Loaded
[ 16.089271] FS-Cache: Netfs 'nfs' registered for caching
[ 16.130484] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.052204] lp: driver loaded but no devices found
[ 21.092090] ppdev: user-space parallel port driver
[ 22.979812] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 22.979815] vboxdrv: Successfully done.
[ 22.979817] vboxdrv: Found 2 processor cores.
[ 22.980348] VBoxDrv: dbg - g_abExecMemory=ffffffffa03bf6c0
[ 22.980372] vboxdrv: fAsync=0 offMin=0x18c offMax=0x60f
[ 22.981454] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 22.981457] vboxdrv: Successfully loaded version 3.2.6 (interface 0x00140001).
[ 25.140719] alloc irq_desc for 28 on node -1
[ 25.140726] alloc kstat_irqs on node -1
[ 25.140754] ATL1E 0000:03:00.0: irq 28 for MSI/MSI-X
[ 25.142060] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.325988] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.632321] NET: Registered protocol family 5
[ 26.773766] mtrr: type mismatch for d1fe0000,10000 old: write-back new: write-combining
[ 26.773794] mtrr: type mismatch for d1fc0000,20000 old: write-back new: write-combining
[ 26.773816] mtrr: type mismatch for d1f80000,40000 old: write-back new: write-combining
[ 26.773838] mtrr: type mismatch for d1f00000,80000 old: write-back new: write-combining
[ 26.773859] mtrr: type mismatch for d1e00000,100000 old: write-back new: write-combining
[ 26.773880] mtrr: type mismatch for d1c00000,200000 old: write-back new: write-combining
[ 26.773902] mtrr: type mismatch for d1800000,400000 old: write-back new: write-combining
[ 26.773923] mtrr: type mismatch for d1000000,800000 old: write-back new: write-combining
[ 26.773944] mtrr: type mismatch for d0000000,1000000 old: write-back new: write-combining
[ 212.035376] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 212.036320] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 218.694181] wlan0: deauthenticating from 00:22:6b:dc:6f:30 by local choice (reason=3)
[ 218.694368] wlan0: direct probe to AP 00:22:6b:dc:6f:30 (try 1)
[ 218.697577] wlan0: direct probe responded
[ 218.697582] wlan0: authenticate with AP 00:22:6b:dc:6f:30 (try 1)
[ 218.699549] wlan0: authenticated
[ 218.699574] wlan0: associate with AP 00:22:6b:dc:6f:30 (try 1)
[ 218.702133] wlan0: RX AssocResp from 00:22:6b:dc:6f:30 (capab=0x401 status=0 aid=1)
[ 218.702138] wlan0: associated
[ 218.703159] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 220.000056] CE: hpet increasing min_delta_ns to 15000 nsec
[ 237.328043] wlan0: no IPv6 routers present
[ 839.860065] usb 7-4: new high speed USB device using ehci_hcd and address 2
[ 840.006690] usb 7-4: New USB device found, idVendor=04a9, idProduct=30ef
[ 840.006695] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 840.006699] usb 7-4: Product: Canon Digital Camera
[ 840.006702] usb 7-4: Manufacturer: Canon Inc.
[ 840.006849] usb 7-4: configuration #1 chosen from 1 choice
installe les 2
aptitude install firmware-linux-nonfree et réessaye
note il faut peut être rebooter pour que sa soie pris en charge 
j’ai sélectionné les dépôts nonfree.
# apt-get install firmware-linux-nonfree
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet firmware-linux-nonfree
Tu as fait un “aptitude/apt-get update” avant de tenter l’installation?
oui mais je n’avais pas coché “backports” !
maintenant, apt-get a bien installé le firmware.
J’ai redémarré mais le problème n’est pas résolu.
Re,
Désolé, ma langue à fourché, c’est pas lcpci qu’il fallait, mais lsusb…
Dis…
Ça ne viendrait pas plutôt de l’appareil ton problème “soudain” ?
Y’a pas plusieurs “modes” sur ton appareil photo ?
[quote=“blaisoth”]Ça ne viendrait pas plutôt de l’appareil[/quote]c’est possible.
Dans le menu ‘communication’ de l’appareil, j’ai :
Imprimer/PTP
Connexion PC
J’ai sélectionné la première comme d’habitude (sans vraiment comprendre pourquoi ça marchait)
# lsusb
Bus 007 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c058 Logitech, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Salut,
Evidemment, pas monté…
Tu as essayé le mode ConnexionPC bien sur ?
Quand on voit ce que Canon répond à ses clients Linux… viewtopic.php?f=1&t=29344
Sinon, lecteur de carte… C’est le plus simple pour récupérer ses photos.
Je présume que tu as fait le lsusb quand l’appareil photos était branché.
As-tu essayer sur un autre OS, ou même sur un autre ordinateur si l’appareil était correctement reconnu ?
Quand ça marchait, tu avais déjà le noyau bpo.5 ?
[quote=“lol”]
Tu as essayé le mode ConnexionPC bien sur ?[/quote]oui[quote=“lol”]Sinon, lecteur de carte… C’est le plus simple pour récupérer ses photos.[/quote]j’en ai acheté un du coup. Mais j’aime bien ne pas laisser de problème irrésolu.[quote=“Knard”]Je présume que tu as fait le lsusb quand l’appareil photos était branché.[/quote]# lsusb
Bus 008 Device 003: ID 04a9:30ef Canon, Inc. EOS 350D (ptp)
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046d:c058 Logitech, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
oups[quote=“Knard”]As-tu essayer sur un autre OS, ou même sur un autre ordinateur si l’appareil était correctement reconnu ?[/quote]sur seven ça marche, avec mon noyau bpo5 ça marchait (sûr à 97,6%).