[quote=“lol”]Re,
un dmesg après l’insertion d’une carte donne quoi ?[/quote]
Etrangement il ne fonctionnait pas hier et il fonctionne aujourd’hui sans aucune manipulation de ma part.
Mystère.
Voici le retour de la commande :
[ul][ 0.224607] pci_bus 0000:09: resource 3 io: [0x00-0xffff]
[ 0.224610] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.224643] NET: Registered protocol family 2
[ 0.224773] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.225517] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.227699] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.228265] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.228269] TCP reno registered
[ 0.228411] NET: Registered protocol family 1
[ 0.228433] pci 0000:00:02.0: Boot video device
[ 0.228651] Unpacking initramfs…
[ 0.453157] Freeing initrd memory: 9014k freed
[ 0.457700] Simple Boot Flag at 0x36 set to 0x1
[ 0.458055] audit: initializing netlink socket (disabled)
[ 0.458068] type=2000 audit(1312557962.455:1): initialized
[ 0.461331] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.462708] VFS: Disk quotas dquot_6.5.2
[ 0.462762] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.462842] msgmni has been set to 3947
[ 0.463035] alg: No test for stdrng (krng)
[ 0.463085] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.463088] io scheduler noop registered
[ 0.463090] io scheduler anticipatory registered
[ 0.463092] io scheduler deadline registered
[ 0.463125] io scheduler cfq registered (default)
[ 0.463268] alloc irq_desc for 24 on node -1
[ 0.463270] alloc kstat_irqs on node -1
[ 0.463283] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.463294] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.463445] alloc irq_desc for 25 on node -1
[ 0.463447] alloc kstat_irqs on node -1
[ 0.463456] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.463466] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.463615] alloc irq_desc for 26 on node -1
[ 0.463616] alloc kstat_irqs on node -1
[ 0.463625] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.463635] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.463782] alloc irq_desc for 27 on node -1
[ 0.463784] alloc kstat_irqs on node -1
[ 0.463792] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 0.463803] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.465379] Linux agpgart interface v0.103
[ 0.465395] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 0.465866] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.492250] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.492302] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.492650] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.492677] i8042: PNP detection disabled
[ 0.499856] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.499862] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.499944] mice: PS/2 mouse device common for all mice
[ 0.500017] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.500049] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.500058] cpuidle: using governor ladder
[ 0.500060] cpuidle: using governor menu
[ 0.500064] No iBFT detected.
[ 0.500382] TCP cubic registered
[ 0.500490] NET: Registered protocol family 10
[ 0.501183] Mobile IPv6
[ 0.501186] NET: Registered protocol family 17
[ 0.501271] PM: Resume from disk failed.
[ 0.501285] registered taskstats version 1
[ 0.501902] rtc_cmos 00:07: setting system clock to 2011-08-05 15:26:03 UTC (1312557963)
[ 0.501976] Initalizing network drop monitor service
[ 0.502001] Freeing unused kernel memory: 592k freed
[ 0.502174] Write protecting the kernel read-only data: 4236k
[ 0.518451] udev[56]: starting version 164
[ 0.535214] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.633696] usbcore: registered new interface driver usbfs
[ 0.633728] usbcore: registered new interface driver hub
[ 0.633763] usbcore: registered new device driver usb
[ 0.658602] jme: JMicron JMC2XX ethernet driver version 1.0.5
[ 0.658649] jme 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.658665] jme 0000:08:00.0: setting latency timer to 64
[ 0.659791] eth0: JMC260 Fast Ethernet ver:15 rev:5 macaddr:00:90:f5:ad:79:84
[ 0.661545] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.661580] alloc irq_desc for 19 on node -1
[ 0.661582] alloc kstat_irqs on node -1
[ 0.661591] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.661611] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.661615] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.661642] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.661689] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.663367] sdhci: Secure Digital Host Controller Interface driver
[ 0.663369] sdhci: Copyright© Pierre Ossman
[ 0.664349] sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2391] (rev 90)
[ 0.664377] sdhci-pci 0000:08:00.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.664413] sdhci-pci 0000:08:00.2: setting latency timer to 64
[ 0.664464] Registered led device: mmc0::
[ 0.664498] mmc0: SDHCI controller on PCI [0000:08:00.2] using DMA
[ 0.665570] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.667168] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf8904800
[ 0.668087] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.668256] SCSI subsystem initialized
[ 0.676588] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.676599] ACPI: Thermal Zone [THM0] (25 C)
[ 0.680993] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.681031] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.681034] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.681037] usb usb1: Product: EHCI Host Controller
[ 0.681038] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.681040] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.681371] usb usb1: configuration #1 chosen from 1 choice
[ 0.681463] hub 1-0:1.0: USB hub found
[ 0.681473] hub 1-0:1.0: 6 ports detected
[ 0.681560] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.681569] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.681573] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.681583] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 0.681630] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.681667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.681670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.681672] usb usb2: Product: UHCI Host Controller
[ 0.681674] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.681676] usb usb2: SerialNumber: 0000:00:1a.0
[ 0.681749] usb usb2: configuration #1 chosen from 1 choice
[ 0.681776] hub 2-0:1.0: USB hub found
[ 0.681783] hub 2-0:1.0: 2 ports detected
[ 0.681914] alloc irq_desc for 23 on node -1
[ 0.681917] alloc kstat_irqs on node -1
[ 0.681924] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.681946] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.681950] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.681961] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.682002] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.685388] libata version 3.00 loaded.
[ 0.685891] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.686896] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00
[ 0.699814] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.699844] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.699846] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.699849] usb usb3: Product: EHCI Host Controller
[ 0.699851] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.699853] usb usb3: SerialNumber: 0000:00:1d.7
[ 0.699940] usb usb3: configuration #1 chosen from 1 choice
[ 0.699971] hub 3-0:1.0: USB hub found
[ 0.699980] hub 3-0:1.0: 6 ports detected
[ 0.700061] alloc irq_desc for 21 on node -1
[ 0.700064] alloc kstat_irqs on node -1
[ 0.700072] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.700084] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.700088] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.700105] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.700152] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.700191] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.700194] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.700196] usb usb4: Product: UHCI Host Controller
[ 0.700198] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.700200] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.700271] usb usb4: configuration #1 chosen from 1 choice
[ 0.700300] hub 4-0:1.0: USB hub found
[ 0.700307] hub 4-0:1.0: 2 ports detected
[ 0.700366] ahci 0000:00:1f.2: version 3.0
[ 0.700382] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.700434] alloc irq_desc for 28 on node -1
[ 0.700436] alloc kstat_irqs on node -1
[ 0.700448] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.700505] ahci: SSS flag set, parallel bus scan disabled
[ 0.700549] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.700553] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs
[ 0.700559] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.723881] scsi0 : ahci
[ 0.723999] scsi1 : ahci
[ 0.724064] scsi2 : ahci
[ 0.724132] scsi3 : ahci
[ 0.724196] scsi4 : ahci
[ 0.724259] scsi5 : ahci
[ 0.724310] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 28
[ 0.724313] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 28
[ 0.724315] ata3: DUMMY
[ 0.724317] ata4: DUMMY
[ 0.724320] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 28
[ 0.724323] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 28
[ 0.724359] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.724371] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.724375] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.724391] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.724426] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 0.724474] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.724477] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724479] usb usb5: Product: UHCI Host Controller
[ 0.724481] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.724483] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.724562] usb usb5: configuration #1 chosen from 1 choice
[ 0.724592] hub 5-0:1.0: USB hub found
[ 0.724599] hub 5-0:1.0: 2 ports detected
[ 0.724656] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.724663] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.724666] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.724674] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.724704] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.724740] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.724742] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724744] usb usb6: Product: UHCI Host Controller
[ 0.724746] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.724748] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.724804] usb usb6: configuration #1 chosen from 1 choice
[ 0.724830] hub 6-0:1.0: USB hub found
[ 0.724836] hub 6-0:1.0: 2 ports detected
[ 0.724883] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.724889] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.724893] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.724900] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.724928] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.724961] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.724964] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724966] usb usb7: Product: UHCI Host Controller
[ 0.724968] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.724970] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.725024] usb usb7: configuration #1 chosen from 1 choice
[ 0.725053] hub 7-0:1.0: USB hub found
[ 0.725060] hub 7-0:1.0: 2 ports detected
[ 0.725105] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.725114] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.725117] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.725125] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.725164] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.725200] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.725202] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725204] usb usb8: Product: UHCI Host Controller
[ 0.725206] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.725208] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.725263] usb usb8: configuration #1 chosen from 1 choice
[ 0.725294] hub 8-0:1.0: USB hub found
[ 0.725300] hub 8-0:1.0: 2 ports detected
[ 1.044022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.053596] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
[ 1.053600] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.063204] ata1.00: configured for UDMA/133
[ 1.063315] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
[ 1.104014] usb 3-6: new high speed USB device using ehci_hcd and address 2
[ 1.420991] usb 3-6: New USB device found, idVendor=5986, idProduct=0241
[ 1.420993] usb 3-6: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 1.420996] usb 3-6: Product: BisonCam, NB Pro
[ 1.420998] usb 3-6: Manufacturer: BISON Corporation
[ 1.421073] usb 3-6: configuration #1 chosen from 1 choice
[ 1.684008] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 1.784021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.786479] ata2.00: ATAPI: SlimtypeDVD A DS8A5S, WX13, max UDMA/100
[ 1.788002] ata2.00: configured for UDMA/100
[ 1.791838] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A5S WX13 PQ: 0 ANSI: 5
[ 1.869366] usb 5-2: New USB device found, idVendor=046d, idProduct=c52b
[ 1.869369] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.869371] usb 5-2: Product: USB Receiver
[ 1.869373] usb 5-2: Manufacturer: Logitech
[ 1.869442] usb 5-2: configuration #1 chosen from 1 choice
[ 1.884649] usbcore: registered new interface driver hiddev
[ 1.886637] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2
[ 1.886701] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.2-2/input0
[ 1.889554] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3
[ 1.889676] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-2/input1
[ 1.895433] generic-usb 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-2/input2
[ 1.895463] usbcore: registered new interface driver usbhid
[ 1.895465] usbhid: v2.6:USB HID core driver
[ 2.112021] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.432018] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.445791] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.445847] sd 0:0:0:0: [sda] Write Protect is off
[ 2.445850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.445873] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.446050] sda:sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.456217] Uniform CD-ROM driver Revision: 3.20
[ 2.456308] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.471296] sda1 sda2 < sda5 sda6 >
[ 2.513713] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.518391] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.518516] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.926426] PM: Starting manual resume from disk
[ 2.926429] PM: Resume from partition 8:6
[ 2.926431] PM: Checking hibernation image.
[ 2.926593] PM: Error -22 checking image file
[ 2.926595] PM: Resume from disk failed.
[ 2.964782] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.446211] udev[413]: starting version 164
[ 4.688471] ACPI: SSDT 000000007db186a0 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 4.718579] Monitor-Mwait will be used to enter C-1 state
[ 4.720565] Monitor-Mwait will be used to enter C-2 state
[ 4.732959] Monitor-Mwait will be used to enter C-3 state
[ 4.732973] Marking TSC unstable due to TSC halts in idle
[ 4.733083] processor LNXCPU:00: registered as cooling_device0
[ 4.733632] ACPI: SSDT 000000007db19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 4.739483] Switching to clocksource hpet
[ 4.743340] processor LNXCPU:01: registered as cooling_device1
[ 4.768218] ACPI: AC Adapter [ADP0] (off-line)
[ 4.857361] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 4.858475] ACPI: Lid Switch [LID0]
[ 4.858551] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 4.858561] ACPI: Power Button [PWRB]
[ 4.858610] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 4.858617] ACPI: Sleep Button [SLPB]
[ 4.858668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 4.858672] ACPI: Power Button [PWRF]
[ 4.954531] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.385736] ACPI: Battery Slot [BAT0] (battery present)
[ 5.385795] ACPI: WMI: Mapper loaded
[ 5.674456] rtllib_crypt: registered algorithm ‘NULL’
[ 5.674459] rtllib_crypt: registered algorithm ‘TKIP’
[ 5.674461] rtllib_crypt: registered algorithm ‘CCMP’
[ 5.674463] rtllib_crypt: registered algorithm ‘WEP’
[ 5.674464]
[ 5.674465] Linux kernel driver for RTL8192 based WLAN cards
[ 5.674467] Copyright © 2007-2008, Realsil Wlan Driver
[ 5.674535] rtl819xSE 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.674543] rtl819xSE 0000:02:00.0: setting latency timer to 64
[ 5.674721] Memory mapped space start: 0xf8500000
[ 5.675437] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 5.675443] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
[ 5.675539] GetPciBusInfo(): Find Device(10EC:8172) bus=2 dev=0, func=0
[ 5.675542] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.676721] GetPciBridegInfo : Find Device(8086:2940) bus=0 dev=28, func=0
[ 5.676724] Pci Bridge Vendor is found index: 0
[ 5.676725] Pci Bridge Vendor is 8086
[ 5.682253] =========>dm_InitRateAdaptiveMask: bUseRAMask=0
[ 6.116075] [drm] Initialized drm 1.1.0 20060810
[ 6.138032] Linux video capture interface: v2.00
[ 6.225282] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6.225293] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6.225301] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.225306] i915 0000:00:02.0: setting latency timer to 64
[ 6.230454] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0241)
[ 6.234684] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb3/3-6/3-6:1.0/input/input9
[ 6.234742] usbcore: registered new interface driver uvcvideo
[ 6.234745] USB Video Class driver (v0.1.0)
[ 6.242988] alloc irq_desc for 29 on node -1
[ 6.242992] alloc kstat_irqs on node -1
[ 6.243003] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 6.243010] [drm] set up 31M of stolen space
[ 6.420711] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 6.459883] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 7.070310] Console: switching to colour frame buffer device 170x48
[ 7.073366] fb0: inteldrmfb frame buffer device
[ 7.073368] registered panic notifier
[ 7.085429] acpi device:04: registered as cooling_device2
[ 7.085561] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 7.085622] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.085657] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.085712] alloc irq_desc for 22 on node -1
[ 7.085714] alloc kstat_irqs on node -1
[ 7.085722] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.085765] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.223962] hda_codec: ALC272: BIOS auto-probing.
[ 7.225137] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 7.880354] Adding 1951736k swap on /dev/sda6. Priority:-1 extents:1 across:1951736k
[ 8.256213] loop: module loaded
[ 8.664102] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 9.662992] fuse init (API version 7.13)
[ 10.098659] alloc irq_desc for 30 on node -1
[ 10.098663] alloc kstat_irqs on node -1
[ 10.098682] jme 0000:08:00.0: irq 30 for MSI/MSI-X
[ 10.099016] eth0: Link is down.
[ 10.099370] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.373949] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 12.277433] rtl819xSE 0000:02:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
[ 12.459157] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 12.459161] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 12.459163] HW_VAR_MRC: Turn on 1T1R MRC!
[ 12.459583] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.932998] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 12.933004] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 12.933006] HW_VAR_MRC: Turn on 1T1R MRC!
[ 15.733590] lp: driver loaded but no devices found
[ 15.782234] ppdev: user-space parallel port driver
[ 35.139730] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 35.139734] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 35.139736] HW_VAR_MRC: Turn on 1T1R MRC!
[ 38.234400] Linking with NicolasPIMENTEL,channel:11, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[ 38.234416] Linking with NicolasPIMENTEL,channel:11, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[ 38.234456] rtllib_associate_procedure_wq(), chan:11
[ 38.234459] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 38.244418] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 1,ieee->qos_capability is 1
[ 38.247192] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 38.256118] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a42b
[ 38.256121] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a44f
[ 38.256123] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e4322
[ 38.256125] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f3222
[ 38.256129] Associated successfully
[ 38.256130] normal associate
[ 38.256140] Using G rates:108
[ 38.256141] Successfully associated, ht enabled
[ 38.256143] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:1
[ 38.266099] pHTInfo->bCurBW40MHz is 1
[ 38.266108] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x000ff015
[ 38.267449] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.482325] dm_check_edca_turbo():iot peer is ralink, bssid:ba:95:9a:05:36:e8
[ 38.608971] RX: IEEE802.1X EAPOL frame!
[ 38.612616] RX: IEEE802.1X EAPOL frame!
[ 38.612675] alg name:CCMP
[ 38.624992] ====>rx ADDBAREQ from :ba:95:9a:05:36:e8
[ 38.624999] ====>to send ADDBARSP
[ 38.660411] padlock: VIA PadLock not detected.
[ 38.677743] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 38.678346] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 40.524019] ====>to send ADDBAREQ!!!
[ 40.540621] ====>rx ADDBARSP from :ba:95:9a:05:36:e8
[ 41.614053] RX: IEEE802.1X EAPOL frame!
[ 41.614150] alg name:TKIP
[ 41.642350] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 41.642952] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 44.459126] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 45.005279] DHCP pkt src port:68, dest port:67!!
[ 45.077025] ====>to send ADDBAREQ!!!
[ 45.085652] ====>rx ADDBARSP from :ba:95:9a:05:36:e8
[ 48.740032] wlan0: no IPv6 routers present
[ 50.458238] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 62.457310] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 65.060097] Scan in 40M, force to 20M first:3, 1
[ 66.516059] Scan in 20M, back to 40M
[ 66.526050] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x000ff015
[ 70.457304] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 70.931566] mmc0: new SD card at address 1dac
[ 70.962666] mmcblk0: mmc0:1dac SD02G 1.83 GiB
[ 70.963037] mmcblk0: p1
[ 71.165768] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 86.457347] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 94.457306] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 100.457307] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 105.005991] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[ 105.061075] Scan in 40M, force to 20M first:3, 1
[ 106.516090] Scan in 20M, back to 40M
[ 106.526084] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x000ff015
[ 108.457307] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 114.457314] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 146.466374] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 165.005973] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[ 165.060059] Scan in 40M, force to 20M first:3, 1
[ 166.516062] Scan in 20M, back to 40M
[ 166.526063] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x000ff015
[ 168.458954] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 212.458348] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[ 213.689109] rtl8192_hw_sleep_down(): RF Change in progress!
[ 215.693036] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
[/ul]
Tu peux m’expliquer l’intérêt de la commande ?
Petit conseil : quel option choisir pour minimiser cette liste dans un petit encard type terminal. La focntion est présente sur le forum ubuntu-fr, je suppose donc qu’elle existe sur ce forum.
