Intel 945GME, Sid et accélération 3D

[Arthur]

Bonjour à tous,

J’ai un soucis avec l’accélération 3D depuis… quelques temps (je ne l’utilise pas beaucoup, donc impossible de dire quand ça a commencé)!

Je tourne à ~20FPS sans la transparence activée, avec la transparence dans les effets de bureau KDE ça monte à 60FPS. Auparavant (quand?) je tournais à environ 300FPS (quoique certains forumeux aient réussi à faire beaucoup mieux avec cette puce).

Les infos qui vont bien:

arthur@zeus:~/bin $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)

arthur@zeus:~ $ grep EE /var/log/Xorg.0.log (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3874.525] (II) Loading extension MIT-SCREEN-SAVER [ 3875.607] (EE) HID 1267:0103: failed to initialize for relative axes.

arthur@zeus:~ $ glxinfo | grep direct direct rendering: Yes

J’ai essayé de mettre un xorg.conf qui fonctionnait bien avant chez moi, et des xorg.conf indiqués comme fonctionnant pour cette carte, mais c’est identique à pas de xorg.conf niveau performances.

Le module chargé est bien le i915.

J’ai purgé et réinstallé xorg, aucun changement.

Je pensais retrograder le noyau ou xorg en stable pour tester et éventuellement faire un rapport de bug, à moins que vous n’ayiez une meilleure idée?

[Clochette]

Je vais suivre ton fil, j’ai le même chipset et j’ai pas encore listé tous les bogues encore actif sur ce dit chipset

[Triangle]

Si tu est en sid tu dois avoir au moins le kernel 2.6.38 qui gère normalement le kms mieux que le 2.6.32 de squeeze.
Normalement c’est activé par défaut mais tu peux rajouter dans grub l’option i915.modeset=1 pour forcer xorg à utiliser le driver intel car xorg-server-intel reconnait trois driver pour les gpu intel : vesa (i915.modeset=0), fb et intel.

Il y a aussi des pistes avec uxa et exa dans un xorg.conf.

Mais en résumé, j’avais déjà posté un coup de gueule sur les gpu intel, les perfs sont en constante régression.

[Arthur]

[quote=“Triangle”]Si tu est en sid tu dois avoir au moins le kernel 2.6.38 qui gère normalement le kms mieux que le 2.6.32 de squeeze.
Normalement c’est activé par défaut mais tu peux rajouter dans grub l’option i915.modeset=1 pour forcer xorg à utiliser le driver intel car xorg-server-intel reconnait trois driver pour les gpu intel : vesa (i915.modeset=0), fb et intel.[/quote]

Mais dans ce cas, lsmod ne me renverrait pas le module i915 mais vesa ou fb?

Mais en résumé, j’avais déjà posté un coup de gueule sur les gpu intel, les perfs sont en constante régression.

C’est un peu ce que je crains. Dommage car elle sont pas si mal ces puces…

[Triangle]

Pour voir quel driver est chargé il faut regarder le log de xorg.
Mais comme son direct rendering est yes je suppose que c’est le driver intel qui est utilisé.

Sinon je te joins ci-dessous mon bout de xorg.conf qui m’a permis d’avoir un affichage a peu près décent (mais en retrait versus lenny).
Section “Device”
### Available Driver options are:-
### Values: : integer, : float, : “True”/“False”,
### : “String”, : " Hz/kHz/MHz"
### [arg]: arg optional
#Option “ShadowFB” # []
#Option “DefaultRefresh” # []
#Option “ModeSetClearScreen” # []
Identifier "Configured Video Device"
Driver "intel"
Option “AccelMethod” "UXA"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID “PCI:0:2:0”

Je ne sais pas si tu connais la manip pour générer un xorg.conf “maison”?

[Arthur]

Je ne sais pas si tu connais la manip pour générer un xorg.conf “maison”?

Euh, nano xorg.conf?

Bon, l’UXA ne me donne pas de meilleur résultat que le XAA. D’ailleurs, si X ne refusait pas de se lancer quand je mets des conneries dedans, je me dirais qu’il ne prend pas en compte mon Xorg!

Et j’ai forcé le i915 à tout hasard dans Grub2, toujours bloqué à 20FPS.

[Triangle]

Mmmh, trop facile le nano xorg.conf

2 possibilités :

• Tu as sous la main un vieux xorg.conf qui marchait et il faut le copier dans /etc/X11
• Tu est obligé d’en générer un
  Pour le générer (de mémoire) : depuis l’invite gdm (ou autre) ouvrir une session terminal ou depuis le graphique faire un alt+F1 et se loguer en root.
  Rentrer le commande suivante : service gdm stop

Ensuite lancer la commande x -configure qui va générer un fichier xorg.new dans le dossier root (je pense qu’il est possible de générer le fichier en user pour le récupérer dans son home)

Modifier les options que l’on souhaite dans xorg.new et le renommer en xorg.conf avant de le copier dans /etc/X11.

Ensuite service gdm start et vérifier le log de xorg pour voir s’il prend bien en compte le xorg.conf.

Perso je pense que l’option i915.modeset=1 dans ton grub devrait améliorer l’ordinaire.

[Baruch]

Bonjour,

perso avec ou sans compiz c’est 60fps aussi…

[Arthur]

[quote=“Triangle”]Mmmh, trop facile le nano xorg.conf

2 possibilités :

• Tu as sous la main un vieux xorg.conf qui marchait et il faut le copier dans /etc/X11[/quote]

J’en avais un qui traînait sur SD. À l’époque, je râlais car j’étais à 300FPS .

J’y ai ajouté ta ligne, idem.

Le xorg.conf en question:

[code]Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Module"
Load "bitmap"
Load "extmod"
Load "dri"
Load "dbe"
Load "ddc"
Load “record”
#Load “xtrap”
#Load "aiglx"
Load "glx"
Load "type1"
Load "freetype"
Load "int10"
Load "i2c"
Load "vbe"
EndSection

Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
Driver "intel"
Option “AccelMethod” "UXA"
Option “XAANoOffscreenPixmaps” "true"
Option “AllowGLXWithComposite” "True"
Option “TripleBuffer” “true”
#l’option DRI indique que l’on veut vraiment utiliser l’accélération 3D.
Option “DRI”
#EnablePageFlip augmente la vitesse d’affichage 3D, en principe.
Option “EnablePageFlip” “True”
#RenderAccel est une option pour l’activation de l’accélération 3D.
Option “RenderAccel” “true”
#Backingstore améliore la vraie transparence.
Option “backingstore” "true"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection

EndSection

Section “ServerLayout”
#Option “AIGLX” "true"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option “Composite” "Enable"
Option “RENDER” "Enable"
Option “DAMAGE” "true"
EndSection[/code]

Perso je pense que l’option i915.modeset=1 dans ton grub devrait améliorer l’ordinaire.

J’ai essayé, pas de changement. J’ai trouvé dans /etc/initramfs-tools/modules des bouts de mesa et de framebuffer qui traînaient, j’ai viré et j’ai laissé i915 modeset, mais toujours 20FPS!

Pour info, mon Xorg.0.log:

[code][ 3059.996]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 3059.996] X Protocol Version 11, Revision 0
[ 3059.996] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 3059.996] Current Operating System: Linux zeus 2.6.39-1-686-pae #1 SMP Fri May 20 20:40:05 UTC 2011 i686
[ 3059.996] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-1-686-pae root=UUID=fe5fdaa6-988e-457b-be33-3c8bb36e7ba5 ro quiet vga=794 i915.modeset=1
[ 3059.996] Build Date: 30 May 2011 12:03:58PM
[ 3059.996] xorg-server 2:1.10.2-1 (Cyril Brulebois kibi@debian.org)
[ 3059.996] Current version of pixman: 0.21.8
[ 3059.997] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3059.997] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3059.997] (==) Log file: “/var/log/Xorg.0.log”, Time: Sat Jun 4 10:49:32 2011
[ 3059.997] (==) Using config file: “/etc/X11/xorg.conf”
[ 3059.997] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 3059.998] (==) ServerLayout “Default Layout”
[ 3059.998] () |–>Screen “Default Screen” (0)
[ 3059.998] () | |–>Monitor “Configured Monitor”
[ 3059.999] () | |–>Device “Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller”
[ 3059.999] () |–>Input Device “Generic Keyboard”
[ 3059.999] () |–>Input Device “Configured Mouse”
[ 3059.999] (==) Automatically adding devices
[ 3059.999] (==) Automatically enabling devices
[ 3059.999] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
[ 3059.999] Entry deleted from font path.
[ 3059.999] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 3059.999] (==) ModulePath set to “/usr/lib/xorg/modules”
[ 3059.999] () Extension “Composite” is enabled
[ 3059.999] () Extension “RENDER” is enabled
[ 3059.999] (**) Extension “DAMAGE” is enabled
[ 3060.000] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3060.000] (WW) Hotplugging is on, devices using drivers ‘kbd’, ‘mouse’ or ‘vmmouse’ will be disabled.
[ 3060.000] (WW) Disabling Generic Keyboard
[ 3060.000] (WW) Disabling Configured Mouse
[ 3060.000] (II) Loader magic: 0x8232ae0
[ 3060.000] (II) Module ABI versions:
[ 3060.000] X.Org ANSI C Emulation: 0.4
[ 3060.000] X.Org Video Driver: 10.0
[ 3060.000] X.Org XInput driver : 12.2
[ 3060.000] X.Org Server Extension : 5.0
[ 3060.002] (–) PCI:*(0:0:2:0) 8086:27ae:1043:1252 rev 3, Mem @ 0xfbe00000/524288, 0xd0000000/268435456, 0xfbdc0000/262144, I/O @ 0x0000dc80/8
[ 3060.002] (–) PCI: (0:0:2:1) 8086:27a6:1043:1252 rev 3, Mem @ 0xfbe80000/524288
[ 3060.002] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3060.002] (II) “extmod” will be loaded. This was enabled by default and also specified in the config file.
[ 3060.002] (II) “dbe” will be loaded. This was enabled by default and also specified in the config file.
[ 3060.002] (II) “glx” will be loaded. This was enabled by default and also specified in the config file.
[ 3060.002] (II) “record” will be loaded. This was enabled by default and also specified in the config file.
[ 3060.002] (II) “dri” will be loaded. This was enabled by default and also specified in the config file.
[ 3060.002] (II) “dri2” will be loaded by default.
[ 3060.002] (II) LoadModule: “extmod”
[ 3060.003] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 3060.004] (II) Module extmod: vendor=“X.Org Foundation”
[ 3060.004] compiled for 1.10.2, module version = 1.0.0
[ 3060.004] Module class: X.Org Server Extension
[ 3060.004] ABI class: X.Org Server Extension, version 5.0
[ 3060.004] (II) Loading extension SELinux
[ 3060.004] (II) Loading extension MIT-SCREEN-SAVER
[ 3060.005] (II) Loading extension XFree86-VidModeExtension
[ 3060.005] (II) Loading extension XFree86-DGA
[ 3060.005] (II) Loading extension DPMS
[ 3060.005] (II) Loading extension XVideo
[ 3060.005] (II) Loading extension XVideo-MotionCompensation
[ 3060.005] (II) Loading extension X-Resource
[ 3060.005] (II) LoadModule: “dri”
[ 3060.006] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 3060.006] (II) Module dri: vendor=“X.Org Foundation”
[ 3060.006] compiled for 1.10.2, module version = 1.0.0
[ 3060.006] ABI class: X.Org Server Extension, version 5.0
[ 3060.006] (II) Loading extension XFree86-DRI
[ 3060.006] (II) LoadModule: “dbe”
[ 3060.007] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 3060.007] (II) Module dbe: vendor=“X.Org Foundation”
[ 3060.007] compiled for 1.10.2, module version = 1.0.0
[ 3060.007] Module class: X.Org Server Extension
[ 3060.007] ABI class: X.Org Server Extension, version 5.0
[ 3060.007] (II) Loading extension DOUBLE-BUFFER
[ 3060.007] (II) LoadModule: “ddc”
[ 3060.007] (II) Module “ddc” already built-in
[ 3060.007] (II) LoadModule: “record”
[ 3060.008] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 3060.008] (II) Module record: vendor=“X.Org Foundation”
[ 3060.009] compiled for 1.10.2, module version = 1.13.0
[ 3060.009] Module class: X.Org Server Extension
[ 3060.009] ABI class: X.Org Server Extension, version 5.0
[ 3060.009] (II) Loading extension RECORD
[ 3060.009] (II) LoadModule: “glx”
[ 3060.009] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3060.010] (II) Module glx: vendor=“X.Org Foundation”
[ 3060.010] compiled for 1.10.2, module version = 1.0.0
[ 3060.010] ABI class: X.Org Server Extension, version 5.0
[ 3060.010] (==) AIGLX enabled
[ 3060.010] (II) Loading extension GLX
[ 3060.010] (II) LoadModule: “int10”
[ 3060.011] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 3060.011] (II) Module int10: vendor=“X.Org Foundation”
[ 3060.011] compiled for 1.10.2, module version = 1.0.0
[ 3060.011] ABI class: X.Org Video Driver, version 10.0
[ 3060.011] (II) LoadModule: “i2c”
[ 3060.011] (II) Module “i2c” already built-in
[ 3060.011] (II) LoadModule: “vbe”
[ 3060.011] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 3060.012] (II) Module vbe: vendor=“X.Org Foundation”
[ 3060.012] compiled for 1.10.2, module version = 1.1.0
[ 3060.012] ABI class: X.Org Video Driver, version 10.0
[ 3060.012] (II) LoadModule: “dri2”
[ 3060.013] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 3060.013] (II) Module dri2: vendor=“X.Org Foundation”
[ 3060.013] compiled for 1.10.2, module version = 1.2.0
[ 3060.013] ABI class: X.Org Server Extension, version 5.0
[ 3060.013] (II) Loading extension DRI2
[ 3060.013] (II) LoadModule: “intel”
[ 3060.014] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3060.014] (II) Module intel: vendor=“X.Org Foundation”
[ 3060.014] compiled for 1.10.1, module version = 2.15.0
[ 3060.014] Module class: X.Org Video Driver
[ 3060.014] ABI class: X.Org Video Driver, version 10.0
[ 3060.014] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 3060.016] (++) using VT number 7

[ 3060.042] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3060.043] drmOpenDevice: node name is /dev/dri/card0
[ 3060.043] drmOpenDevice: open result is 8, (OK)
[ 3060.043] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 3060.043] drmOpenDevice: node name is /dev/dri/card0
[ 3060.043] drmOpenDevice: open result is 8, (OK)
[ 3060.043] drmOpenByBusid: drmOpenMinor returns 8
[ 3060.043] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 3060.043] () intel(0): Depth 24, (–) framebuffer bpp 32
[ 3060.044] (==) intel(0): RGB weight 888
[ 3060.044] (==) intel(0): Default visual is TrueColor
[ 3060.044] () intel(0): Option “AccelMethod” “UXA”
[ 3060.044] () intel(0): Option “DRI”
[ 3060.044] (II) intel(0): Integrated Graphics Chipset: Intel® 945GME
[ 3060.044] (–) intel(0): Chipset: “945GME”
[ 3060.044] () intel(0): Relaxed fencing disabled
[ 3060.044] () intel(0): Framebuffer tiled
[ 3060.044] () intel(0): Pixmaps tiled
[ 3060.044] () intel(0): 3D buffers tiled
[ 3060.045] () intel(0): SwapBuffers wait enabled
[ 3060.045] (==) intel(0): video overlay key set to 0x101fe
[ 3060.220] (II) intel(0): Output VGA1 using monitor section Configured Monitor
[ 3060.357] (II) intel(0): Output DVI1 has no monitor section
[ 3060.516] (II) intel(0): EDID for output VGA1
[ 3060.516] (II) intel(0): Manufacturer: PKB Model: c2 Serial#: 2471564511
[ 3060.516] (II) intel(0): Year: 2009 Week: 35
[ 3060.516] (II) intel(0): EDID Version: 1.3
[ 3060.516] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 3060.516] (II) intel(0): Sync: Separate
[ 3060.517] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 3060.517] (II) intel(0): Gamma: 2.20
[ 3060.517] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 3060.517] (II) intel(0): First detailed timing is preferred mode
[ 3060.517] (II) intel(0): redX: 0.650 redY: 0.335 greenX: 0.295 greenY: 0.605
[ 3060.517] (II) intel(0): blueX: 0.145 blueY: 0.075 whiteX: 0.313 whiteY: 0.329
[ 3060.517] (II) intel(0): Supported established timings:
[ 3060.517] (II) intel(0): 720x400@70Hz
[ 3060.517] (II) intel(0): 640x480@60Hz
[ 3060.517] (II) intel(0): 640x480@67Hz
[ 3060.517] (II) intel(0): 640x480@72Hz
[ 3060.518] (II) intel(0): 640x480@75Hz
[ 3060.518] (II) intel(0): 800x600@56Hz
[ 3060.518] (II) intel(0): 800x600@60Hz
[ 3060.518] (II) intel(0): 800x600@72Hz
[ 3060.518] (II) intel(0): 800x600@75Hz
[ 3060.518] (II) intel(0): 832x624@75Hz
[ 3060.518] (II) intel(0): 1024x768@60Hz
[ 3060.518] (II) intel(0): 1024x768@70Hz
[ 3060.518] (II) intel(0): 1024x768@75Hz
[ 3060.518] (II) intel(0): 1152x864@75Hz
[ 3060.518] (II) intel(0): Manufacturer’s mask: 0
[ 3060.518] (II) intel(0): Supported standard timings:
[ 3060.518] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 3060.518] (II) intel(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 3060.519] (II) intel(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 3060.519] (II) intel(0): Supported detailed timing:
[ 3060.519] (II) intel(0): clock: 118.2 MHz Image Size: 442 x 249 mm
[ 3060.519] (II) intel(0): h_active: 1600 h_sync: 1688 h_sync_end 1856 h_blank_end 2112 h_border: 0
[ 3060.519] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 934 v_border: 0
[ 3060.519] (II) intel(0): Monitor name: Viseo 200Ws
[ 3060.519] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
[ 3060.519] (II) intel(0): Serial No: D140C0044000
[ 3060.519] (II) intel(0): EDID (in hex):
[ 3060.519] (II) intel(0): 00ffffffffffff004162c200df145193
[ 3060.519] (II) intel(0): 23130103682c1978eab815a6554b9b25
[ 3060.520] (II) intel(0): 135054bfee80714f81c0810001010101
[ 3060.520] (II) intel(0): 010101010101312e40006284223058a8
[ 3060.520] (II) intel(0): 3500baf91000001c000000fc00566973
[ 3060.520] (II) intel(0): 656f2032303057730a20000000fd0038
[ 3060.520] (II) intel(0): 4c1f5312000a202020202020000000ff
[ 3060.520] (II) intel(0): 004431343043303034343030300a005f
[ 3060.520] (II) intel(0): EDID vendor “PKB”, prod id 194
[ 3060.520] (II) intel(0): Using EDID range info for horizontal sync
[ 3060.520] (II) intel(0): Using EDID range info for vertical refresh
[ 3060.521] (II) intel(0): Printing DDC gathered Modelines:
[ 3060.521] (II) intel(0): Modeline "1600x900"x0.0 118.25 1600 1688 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz)
[ 3060.521] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 3060.521] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 3060.521] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 3060.521] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 3060.521] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 3060.521] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 3060.521] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 3060.522] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 3060.522] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 3060.522] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 3060.522] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 3060.522] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 3060.522] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 3060.522] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 3060.522] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 3060.522] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 3060.523] (II) intel(0): Printing probed modes for output VGA1
[ 3060.523] (II) intel(0): Modeline "1600x900"x59.9 118.25 1600 1688 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz)
[ 3060.523] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 3060.523] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 3060.523] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 3060.523] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 3060.523] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 3060.523] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 3060.523] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 3060.524] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 3060.524] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 3060.524] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 3060.524] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 3060.524] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 3060.524] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 3060.524] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 3060.524] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 3060.524] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 3060.659] (II) intel(0): EDID for output DVI1
[ 3060.659] (II) intel(0): Output VGA1 connected
[ 3060.659] (II) intel(0): Output DVI1 disconnected
[ 3060.659] (II) intel(0): Using exact sizes for initial modes
[ 3060.659] (II) intel(0): Output VGA1 using initial mode 1600x900
[ 3060.659] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3060.660] (II) intel(0): Kernel page flipping support detected, enabling
[ 3060.660] () intel(0): Display dimensions: (440, 250) mm
[ 3060.660] () intel(0): DPI set to (92, 91)
[ 3060.660] (II) Loading sub module “fb”
[ 3060.660] (II) LoadModule: “fb”
[ 3060.660] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3060.661] (II) Module fb: vendor=“X.Org Foundation”
[ 3060.661] compiled for 1.10.2, module version = 1.0.0
[ 3060.661] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3060.661] (II) Loading sub module “dri2”
[ 3060.661] (II) LoadModule: “dri2”
[ 3060.662] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 3060.662] (II) Module dri2: vendor=“X.Org Foundation”
[ 3060.662] compiled for 1.10.2, module version = 1.2.0
[ 3060.662] ABI class: X.Org Server Extension, version 5.0
[ 3060.662] (==) Depth 24 pixmap format is 32 bpp
[ 3060.662] (II) intel(0): [DRI2] Setup complete
[ 3060.663] (II) intel(0): [DRI2] DRI driver: i915
[ 3060.663] (II) intel(0): Allocated new frame buffer 1600x900 stride 8192, tiled
[ 3060.663] (II) UXA(0): Driver registered support for the following operations:
[ 3060.663] (II) solid
[ 3060.663] (II) copy
[ 3060.663] (II) composite (RENDER acceleration)
[ 3060.663] (II) put_image
[ 3060.663] (II) get_image
[ 3060.663] () intel(0): Option “BackingStore” “true”
[ 3060.663] () intel(0): Backing store enabled
[ 3060.663] (==) intel(0): Silken mouse enabled
[ 3060.663] (II) intel(0): Initializing HW Cursor
[ 3060.696] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3060.697] (==) intel(0): DPMS enabled
[ 3060.697] (II) intel(0): Set up textured video
[ 3060.697] (II) intel(0): Set up overlay video
[ 3060.697] (II) intel(0): direct rendering: DRI2 Enabled
[ 3060.697] (WW) intel(0): Option “XAANoOffscreenPixmaps” is not used
[ 3060.697] (WW) intel(0): Option “AllowGLXWithComposite” is not used
[ 3060.697] (WW) intel(0): Option “TripleBuffer” is not used
[ 3060.697] (WW) intel(0): Option “EnablePageFlip” is not used
[ 3060.697] (WW) intel(0): Option “RenderAccel” is not used
[ 3060.697] (==) intel(0): hotplug detection: “enabled”
[ 3060.698] (–) RandR disabled
[ 3060.698] (II) Initializing built-in extension Generic Event Extension
[ 3060.698] (II) Initializing built-in extension SHAPE
[ 3060.698] (II) Initializing built-in extension MIT-SHM
[ 3060.698] (II) Initializing built-in extension XInputExtension
[ 3060.698] (II) Initializing built-in extension XTEST
[ 3060.698] (II) Initializing built-in extension BIG-REQUESTS
[ 3060.698] (II) Initializing built-in extension SYNC
[ 3060.698] (II) Initializing built-in extension XKEYBOARD
[ 3060.699] (II) Initializing built-in extension XC-MISC
[ 3060.699] (II) Initializing built-in extension SECURITY
[ 3060.699] (II) Initializing built-in extension XINERAMA
[ 3060.699] (II) Initializing built-in extension XFIXES
[ 3060.699] (II) Initializing built-in extension RENDER
[ 3060.699] (II) Initializing built-in extension RANDR
[ 3060.699] (II) Initializing built-in extension COMPOSITE
[ 3060.699] (II) Initializing built-in extension DAMAGE
[ 3060.699] (II) SELinux: Disabled on system
[ 3060.739] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3060.739] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3060.739] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3060.739] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 3060.739] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3060.740] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
[ 3060.740] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3060.741] (II) intel(0): Setting screen physical size to 423 x 238
[ 3060.895] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3060.895] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 3060.895] (II) LoadModule: “evdev”
[ 3060.896] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3060.896] (II) Module evdev: vendor=“X.Org Foundation”
[ 3060.896] compiled for 1.10.1, module version = 2.6.0
[ 3060.896] Module class: X.Org XInput Driver
[ 3060.896] ABI class: X.Org XInput driver, version 12.2
[ 3060.896] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 3060.896] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3060.896] () Power Button: always reports core events
[ 3060.896] () Power Button: Device: “/dev/input/event1”
[ 3060.908] (–) Power Button: Found keys
[ 3060.908] (II) Power Button: Configuring as keyboard
[ 3060.908] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1”
[ 3060.908] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
[ 3060.908] () Option “xkb_rules” “evdev”
[ 3060.908] () Option “xkb_model” “pc105”
[ 3060.908] () Option “xkb_layout” “fr”
[ 3060.908] () Option “xkb_variant” “latin9”
[ 3060.908] () Option “xkb_options” “lv3:ralt_switch”
[ 3060.985] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 3060.985] () Video Bus: Applying InputClass “evdev keyboard catchall”
[ 3060.985] (II) Using input driver ‘evdev’ for ‘Video Bus’
[ 3060.985] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3060.985] () Video Bus: always reports core events
[ 3060.986] () Video Bus: Device: “/dev/input/event2”
[ 3061.004] (–) Video Bus: Found keys
[ 3061.004] (II) Video Bus: Configuring as keyboard
[ 3061.004] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2”
[ 3061.004] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD)
[ 3061.004] () Option “xkb_rules” “evdev”
[ 3061.004] () Option “xkb_model” “pc105”
[ 3061.005] () Option “xkb_layout” “fr”
[ 3061.005] () Option “xkb_variant” “latin9”
[ 3061.005] () Option “xkb_options” “lv3:ralt_switch”
[ 3061.019] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 3061.019] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 3061.019] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 3061.019] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3061.019] () Power Button: always reports core events
[ 3061.019] () Power Button: Device: “/dev/input/event0”
[ 3061.036] (–) Power Button: Found keys
[ 3061.036] (II) Power Button: Configuring as keyboard
[ 3061.036] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0”
[ 3061.036] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
[ 3061.036] () Option “xkb_rules” “evdev”
[ 3061.036] () Option “xkb_model” “pc105”
[ 3061.036] () Option “xkb_layout” “fr”
[ 3061.037] () Option “xkb_variant” “latin9”
[ 3061.037] () Option “xkb_options” “lv3:ralt_switch”
[ 3061.046] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
[ 3061.046] (II) No input driver/identifier specified (ignoring)
[ 3061.051] (II) config/udev: Adding input device 123456789A123456789B123456789C123456789D123456 (/dev/input/event3)
[ 3061.051] () 123456789A123456789B123456789C123456789D123456: Applying InputClass “evdev pointer catchall”
[ 3061.051] () 123456789A123456789B123456789C123456789D123456: Applying InputClass “evdev keyboard catchall”
[ 3061.051] (II) Using input driver ‘evdev’ for ‘123456789A123456789B123456789C123456789D123456’
[ 3061.052] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3061.052] () 123456789A123456789B123456789C123456789D123456: always reports core events
[ 3061.052] () 123456789A123456789B123456789C123456789D123456: Device: “/dev/input/event3”
[ 3061.052] (–) 123456789A123456789B123456789C123456789D123456: Found 12 mouse buttons
[ 3061.052] (–) 123456789A123456789B123456789C123456789D123456: Found scroll wheel(s)
[ 3061.052] (–) 123456789A123456789B123456789C123456789D123456: Found relative axes
[ 3061.052] (–) 123456789A123456789B123456789C123456789D123456: Found x and y relative axes
[ 3061.052] (–) 123456789A123456789B123456789C123456789D123456: Found absolute axes
[ 3061.052] (–) 123456789A123456789B123456789C123456789D123456: Found keys
[ 3061.052] (II) 123456789A123456789B123456789C123456789D123456: Configuring as mouse
[ 3061.052] (II) 123456789A123456789B123456789C123456789D123456: Configuring as keyboard
[ 3061.052] (II) 123456789A123456789B123456789C123456789D123456: Adding scrollwheel support
[ 3061.052] () 123456789A123456789B123456789C123456789D123456: YAxisMapping: buttons 4 and 5
[ 3061.052] () 123456789A123456789B123456789C123456789D123456: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3061.052] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3/event3”
[ 3061.053] (II) XINPUT: Adding extended input device “123456789A123456789B123456789C123456789D123456” (type: KEYBOARD)
[ 3061.053] () Option “xkb_rules” “evdev”
[ 3061.053] () Option “xkb_model” “pc105”
[ 3061.053] () Option “xkb_layout” “fr”
[ 3061.053] () Option “xkb_variant” “latin9”
[ 3061.053] () Option “xkb_options” “lv3:ralt_switch”
[ 3061.053] (II) 123456789A123456789B123456789C123456789D123456: initialized for relative axes.
[ 3061.053] (WW) 123456789A123456789B123456789C123456789D123456: ignoring absolute axes.
[ 3061.054] () 123456789A123456789B123456789C123456789D123456: (accel) keeping acceleration scheme 1
[ 3061.054] () 123456789A123456789B123456789C123456789D123456: (accel) acceleration profile 0
[ 3061.054] () 123456789A123456789B123456789C123456789D123456: (accel) acceleration factor: 2.000
[ 3061.054] () 123456789A123456789B123456789C123456789D123456: (accel) acceleration threshold: 4
[ 3061.055] (II) config/udev: Adding input device 123456789A123456789B123456789C123456789D123456 (/dev/input/mouse0)
[ 3061.055] (II) No input driver/identifier specified (ignoring)
[ 3061.059] (II) config/udev: Adding input device HID 1267:0103 (/dev/input/event4)
[ 3061.059] () HID 1267:0103: Applying InputClass “evdev keyboard catchall”
[ 3061.059] (II) Using input driver ‘evdev’ for ‘HID 1267:0103’
[ 3061.059] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3061.059] () HID 1267:0103: always reports core events
[ 3061.059] () HID 1267:0103: Device: “/dev/input/event4”
[ 3061.072] (–) HID 1267:0103: Found keys
[ 3061.072] (II) HID 1267:0103: Configuring as keyboard
[ 3061.072] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4/event4”
[ 3061.072] (II) XINPUT: Adding extended input device “HID 1267:0103” (type: KEYBOARD)
[ 3061.072] () Option “xkb_rules” “evdev”
[ 3061.072] () Option “xkb_model” “pc105”
[ 3061.072] () Option “xkb_layout” “fr”
[ 3061.072] () Option “xkb_variant” “latin9”
[ 3061.073] () Option “xkb_options” “lv3:ralt_switch”
[ 3061.077] (II) config/udev: Adding input device HID 1267:0103 (/dev/input/event5)
[ 3061.077] () HID 1267:0103: Applying InputClass “evdev keyboard catchall”
[ 3061.077] (II) Using input driver ‘evdev’ for ‘HID 1267:0103’
[ 3061.077] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3061.077] () HID 1267:0103: always reports core events
[ 3061.077] () HID 1267:0103: Device: “/dev/input/event5”
[ 3061.078] (–) HID 1267:0103: Found 1 mouse buttons
[ 3061.078] (–) HID 1267:0103: Found scroll wheel(s)
[ 3061.078] (–) HID 1267:0103: Found relative axes
[ 3061.078] (–) HID 1267:0103: Found absolute axes
[ 3061.078] (–) HID 1267:0103: Found keys
[ 3061.078] (II) HID 1267:0103: Configuring as mouse
[ 3061.078] (II) HID 1267:0103: Configuring as keyboard
[ 3061.078] (II) HID 1267:0103: Adding scrollwheel support
[ 3061.078] () HID 1267:0103: YAxisMapping: buttons 4 and 5
[ 3061.078] () HID 1267:0103: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3061.079] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input5/event5”
[ 3061.079] (II) XINPUT: Adding extended input device “HID 1267:0103” (type: KEYBOARD)
[ 3061.079] () Option “xkb_rules” “evdev”
[ 3061.079] () Option “xkb_model” “pc105”
[ 3061.079] () Option “xkb_layout” “fr”
[ 3061.079] () Option “xkb_variant” “latin9”
[ 3061.079] () Option “xkb_options” “lv3:ralt_switch”
[ 3061.080] (EE) HID 1267:0103: failed to initialize for relative axes.
[ 3061.081] (II) HID 1267:0103: initialized for absolute axes.
[ 3061.081] () HID 1267:0103: (accel) keeping acceleration scheme 1
[ 3061.081] () HID 1267:0103: (accel) acceleration profile 0
[ 3061.081] () HID 1267:0103: (accel) acceleration factor: 2.000
[ 3061.081] (**) HID 1267:0103: (accel) acceleration threshold: 4
[ 3061.097] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 3061.097] (II) No input driver/identifier specified (ignoring)
[ 3072.748] (II) intel(0): EDID vendor “PKB”, prod id 194
[ 3072.748] (II) intel(0): Using hsync ranges from config file
[ 3072.748] (II) intel(0): Using vrefresh ranges from config file
[ 3072.748] (II) intel(0): Printing DDC gathered Modelines:
[ 3072.748] (II) intel(0): Modeline "1600x900"x0.0 118.25 1600 1688 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz)
[ 3072.748] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 3072.748] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 3072.748] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 3072.749] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 3072.749] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 3072.749] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 3072.749] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 3072.749] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 3072.749] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 3072.749] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 3072.749] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 3072.749] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 3072.749] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 3072.749] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 3072.749] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 3072.749] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 3085.340] (II) intel(0): EDID vendor “PKB”, prod id 194
[ 3085.340] (II) intel(0): Using hsync ranges from config file
[ 3085.340] (II) intel(0): Using vrefresh ranges from config file
[ 3085.340] (II) intel(0): Printing DDC gathered Modelines:
[ 3085.340] (II) intel(0): Modeline "1600x900"x0.0 118.25 1600 1688 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz)
[ 3085.340] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 3085.340] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 3085.340] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 3085.341] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 3085.341] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 3085.341] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 3085.341] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 3085.341] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 3085.341] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 3085.341] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 3085.341] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 3085.341] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 3085.341] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 3085.341] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 3085.341] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 3085.341] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[/code]

Merci à toi en tous cas pour ton aide

[Arthur]

Bon, j’ai fait des tests:

Sid actuelle:
~ 20FPS

Sid avec kernel 2.6.38:
~ 20FPS

Sid avec 2.6.32:
~ 20FPS

En live:

Ubuntu 11.04 (kernel 2.6.38):
~ 60 FPS

Kubuntu 11.04 (kernel 2.6.38) (test fait avec kubuntu au cas où Unity ait un effet):
~ 60FPS

Là, je recherche dans le forum la période où j’avais de meilleures perfs: 2009.

Ubuntu 9.04 (kernel 2.6.28):
~ 572 FPS!!
Modules activés : agp_part; intel_agp; i915; drm.

Là, je cherche un moyen d’installer proprement un 2.6.28 sur ma sid pour confirmer mon hypothèse. Mais il n’est plus dans les dépôts…
Si quelqu’un a une idée…

[Triangle]

C’est bizarre car je suis sous squeeze avec un kernel 2.6.38 et je tourne aux environs de 300 fps glxgears.
Si ça peut t’aider je peux publier mon xorg.conf, mon lsmod et les config rattachés?

Ca peut sembler pas mal, mais j’avais 1000 fps au même test sous lenny avec un xorg.conf optimisé.

Soit glxgears ne fonctionne plus de la même façon (it is not a benchmark), soit le support des gpu intel est en nette régression.

[Arthur]

[quote=“Triangle”]C’est bizarre car je suis sous squeeze avec un kernel 2.6.38 et je tourne aux environs de 300 fps glxgears.
Si ça peut t’aider je peux publier mon xorg.conf, mon lsmod et les config rattachés?[/quote]

Ma foi, avec plaisir.

Soit glxgears ne fonctionne plus de la même façon (it is not a benchmark), soit le support des gpu intel est en nette régression.

Je penche aussi pour la seconde option vu les perfs du système…

[Baruch]

perso ça fait un moment que je tourne à 60… Mais si il y a mieux je suis preneur…

[Triangle]

Allez un peu de lecture…config sur un eeepc 1000 HD

/etc/modprobe.d/i915-kms.conf contient options i915 modeset=1

/etc/initramfs-tools/modules contient

List of modules that you want to include in your initramfs.

They will be loaded at boot time in the order below.

Syntax: module_name [args …]

You must run update-initramfs(8) to effect this change.

Examples:

raid1

sd_mod

intel_agp
drm
i915.modeset=1

/etc/X11/xorg.conf contient :

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 “Screen0” 0 0
InputDevice “Mouse0” "CorePointer"
InputDevice “Keyboard0” "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection

Section "Module"
Load "dbe"
Load "dri2"
Load "dri"
Load "record"
Load "glx"
Load "extmod"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option “Protocol” "auto"
Option “Device” "/dev/input/mice"
Option “ZAxisMapping” "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section “Device”
### Available Driver options are:-
### Values: : integer, : float, : “True”/“False”,
### : “String”, : " Hz/kHz/MHz"
### [arg]: arg optional
#Option “ShadowFB” # []
#Option “DefaultRefresh” # []
#Option “ModeSetClearScreen” # []
Identifier "Configured Video Device"
Driver "intel"
Option “AccelMethod” "UXA"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Mon lsmod
Module Size Used by
mperf 12387 0
parport_pc 21895 0
ppdev 12621 0
lp 12858 0
parport 27018 3 parport_pc,ppdev,lp
microcode 13213 0
binfmt_misc 12778 1
fuse 55640 5
cpufreq_userspace 12520 0
cpufreq_stats 12670 0
cpufreq_powersave 12422 0
cpufreq_conservative 13598 0
p4_clockmod 12572 0
speedstep_lib 12463 1 p4_clockmod
loop 17805 0
snd_hda_codec_realtek 207804 1
snd_hda_intel 21529 0
snd_hda_codec 57563 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 12906 1 snd_hda_codec
snd_pcm_oss 35864 0
snd_mixer_oss 17649 1 snd_pcm_oss
snd_pcm 52774 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
joydev 16906 0
snd_seq_midi 12744 0
arc4 12418 2
snd_rawmidi 22407 1 snd_seq_midi
ecb 12649 2
snd_seq_midi_event 13124 1 snd_seq_midi
snd_seq 39172 2 snd_seq_midi,snd_seq_midi_event
ath5k 119030 0
ath 17021 1 ath5k
mac80211 160285 1 ath5k
i915 276436 2
snd_timer 22171 2 snd_pcm,snd_seq
uvcvideo 52490 0
eeepc_laptop 18262 0
snd_seq_device 12995 3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 106889 3 ath5k,ath,mac80211
videodev 48418 1 uvcvideo
psmouse 45863 0
tpm_tis 12949 0
drm_kms_helper 26501 1 i915
sparse_keymap 12680 1 eeepc_laptop
battery 12926 0
ac 12552 0
rfkill 18510 2 eeepc_laptop,cfg80211
snd 38153 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_algo_bit 12706 1 i915
tpm 17454 1 tpm_tis
tpm_bios 12799 1 tpm
evdev 13084 22
serio_raw 12758 0
power_supply 13283 2 battery,ac
soundcore 12878 1 snd
rng_core 12550 0
processor 26983 1
button 12866 1 i915
snd_page_alloc 12841 2 snd_hda_intel,snd_pcm
pci_hotplug 26303 1 eeepc_laptop
video 17345 1 i915
ext4 251726 1
mbcache 12810 1 ext4
jbd2 55701 1 ext4
crc16 12327 1 ext4
drm 128416 3 i915,drm_kms_helper
i2c_core 18989 5 i915,videodev,drm_kms_helper,i2c_algo_bit,drm
sd_mod 34941 4
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
ata_piix 21079 3
ahci 20897 0
libahci 22161 1 ahci
uhci_hcd 21850 0
libata 131904 4 ata_generic,ata_piix,ahci,libahci
ehci_hcd 34889 0
scsi_mod 134369 2 sd_mod,libata
usbcore 99058 4 uvcvideo,uhci_hcd,ehci_hcd
thermal 13058 0
atl1e 26886 0
thermal_sys 17667 3 processor,video,thermal
nls_base 12649 1 usbcore

Si ça peut donner des idées…

[Arthur]

Merci, je teste ça ce soir (d’abord modules puis le Xord pour voir ce qui joue le plus)!

[Arthur]

Toujours pareil avec tes fichiers de conf

EDIT: J’ai installé tout ce qui concerne de près ou de loin mesa et je plafonne à ~200FPS.

J’ai appris en cours de route que glxgears donnait des infos non fiables si l’on utilisait vsync (mais pourtant ce n’était pas si mal avant?), donc j’ai aussi testé avec FrozenBobble qui est en effet plus fluide…