Bonjour,
J’ai récupéré un petit PC industriel à base d’ATOM N270, sur lequel j’ai installé Jessie.
J’ai un soucis avec la partie X11: au lancement (via startx) de X11, j’ai un ecran qui clignote/defile sur les cotés, un pointeur de souris découpé en petits morceaux. Si j’amène la souris en bas de l’écran, l’écran se stabilise, et l’image est impeccable. Il me suffit de remonter la souris pour que l’écran recommence à defiler.
L’ecran est un SyncMaster 931ew 1440x900.
J’ai essayé de bricoler avec ou sans xorg.conf, sans plus de succès, changer de résolution, bricoler l’ecran… Nada…
Fouillé un peu le web, pris quelques infos à droite à gauche sans succès…
J’ai l’impression que c’est lié à l’affichage foireux du pointeur de souris.
Si quelqu’un a des idées, merci d’avance.
Quelques infos:
root@telmat:~# uname -a
Linux telmat 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) i686 GNU/Linux
root@telmat:~#
root@telmat:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
04:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
root@telmat:~#
[code]root@telmat:~# more xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 “Screen0” 0 0
InputDevice “Mouse0” "CorePointer"
InputDevice “Keyboard0” "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option “Protocol” "auto"
Option “Device” "/dev/input/mice"
Option “ZAxisMapping” "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section “Device”
### Available Driver options are:-
### Values: : integer, : float, : “True”/“False”,
### : “String”, : " Hz/kHz/MHz",
### : “%”
### [arg]: arg optional
#Option “NoAccel” # []
#Option “AccelMethod” #
#Option “Backlight” #
#Option “DRI” #
#Option “ColorKey” #
#Option “VideoKey” #
#Option “Tiling” # []
#Option “LinearFramebuffer” # []
#Option “SwapbuffersWait” # []
#Option “TripleBuffer” # []
#Option “XvPreferOverlay” # []
#Option “HotPlug” # []
#Option “ReprobeOutputs” # []
#Option “XvMC” # []
#Option “ZaphodHeads” #
#Option “TearFree” # []
#Option “PerCrtcPixmaps” # []
#Option “FallbackDebug” # []
#Option “DebugFlushBatches” # []
#Option “DebugFlushCaches” # []
#Option “DebugWait” # []
#Option “BufferCache” # []
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
[/code]
root@telmat:~# more /var/log/Xorg.0.log
[ 1526.520]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 1526.530] X Protocol Version 11, Revision 0
[ 1526.533] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 1526.537] Current Operating System: Linux telmat 3.16.0-4-686-pae #1 SMP Debian 3.16
.7-ckt11-1+deb8u4 (2015-09-19) i686
[ 1526.537] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=4
a41b008-c96f-4a18-9115-7ae407e40c0b ro quiet
[ 1526.544] Build Date: 11 February 2015 01:14:26AM
[ 1526.548] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 1526.551] Current version of pixman: 0.32.6
[ 1526.559] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1526.559] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1526.575] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 26 12:12:54 2015
[ 1526.579] (==) Using config file: "/etc/X11/xorg.conf"
[ 1526.584] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1526.585] (==) ServerLayout "X.org Configured"
[ 1526.585] (**) |-->Screen "Screen0" (0)
[ 1526.585] (**) | |-->Monitor "Monitor0"
[ 1526.585] (**) | |-->Device "Card0"
[ 1526.585] (**) |-->Input Device "Mouse0"
[ 1526.585] (**) |-->Input Device "Keyboard0"
[ 1526.586] (==) Automatically adding devices
[ 1526.586] (==) Automatically enabling devices
[ 1526.586] (==) Automatically adding GPU devices
[ 1526.586] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1526.586] Entry deleted from font path.
[ 1526.586] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1526.586] Entry deleted from font path.
[ 1526.586] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 1526.586] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 1526.586] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
[ 1526.586] (WW) Disabling Mouse0
[ 1526.586] (WW) Disabling Keyboard0
[ 1526.586] (II) Loader magic: 0xb77bd700
[ 1526.586] (II) Module ABI versions:
[ 1526.586] X.Org ANSI C Emulation: 0.4
[ 1526.586] X.Org Video Driver: 18.0
[ 1526.586] X.Org XInput driver : 21.0
[ 1526.586] X.Org Server Extension : 8.0
[ 1526.587] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1526.590] (--) PCI:*(0:0:2:0) 8086:27ae:8086:27ae rev 3, Mem @ 0xfdf00000/524288, 0x
d0000000/268435456, 0xfdf80000/262144, I/O @ 0x0000ff00/8
[ 1526.590] (II) "glx" will be loaded. This was enabled by default and also specified
in the config file.
[ 1526.590] (II) LoadModule: "glx"
[ 1526.591] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1526.595] (II) Module glx: vendor="X.Org Foundation"
[ 1526.595] compiled for 1.16.4, module version = 1.0.0
[ 1526.595] ABI class: X.Org Server Extension, version 8.0
[ 1526.595] (==) AIGLX enabled
[ 1526.595] (II) LoadModule: "dri"
[ 1526.595] (II) Module "dri" already built-in
[ 1526.595] (II) LoadModule: "dbe"
[ 1526.595] (II) Module "dbe" already built-in
[ 1526.595] (II) LoadModule: "extmod"
[ 1526.595] (II) Module "extmod" already built-in
[ 1526.595] (II) LoadModule: "record"
[ 1526.595] (II) Module "record" already built-in
[ 1526.595] (II) LoadModule: "xtrap"
[ 1526.597] (WW) Warning, couldn't open module xtrap
[ 1526.597] (II) UnloadModule: "xtrap"
[ 1526.597] (II) Unloading xtrap
[ 1526.597] (EE) Failed to load module "xtrap" (module does not exist, 0)
[ 1526.597] (II) LoadModule: "intel"
[ 1526.597] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1526.598] (II) Module intel: vendor="X.Org Foundation"
[ 1526.598] compiled for 1.15.99.904, module version = 2.21.15
[ 1526.598] Module class: X.Org Video Driver
[ 1526.598] ABI class: X.Org Video Driver, version 18.0
[ 1526.598] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 1526.599] (++) using VT number 2
[ 1526.599] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 1526.600] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1526.600] (==) intel(0): RGB weight 888
[ 1526.600] (==) intel(0): Default visual is TrueColor
[ 1526.601] (**) intel(0): Option "AccelMethod" "uxa"
[ 1526.601] (**) intel(0): Option "DRI" "True"
[ 1526.601] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 1526.601] (**) intel(0): Relaxed fencing disabled
[ 1526.601] (**) intel(0): Wait on SwapBuffers? enabled
[ 1526.601] (**) intel(0): Triple buffering? enabled
[ 1526.601] (**) intel(0): Framebuffer tiled
[ 1526.601] (**) intel(0): Pixmaps tiled
[ 1526.601] (**) intel(0): 3D buffers tiled
[ 1526.601] (**) intel(0): SwapBuffers wait enabled
[ 1526.601] (==) intel(0): video overlay key set to 0x101fe
[ 1526.692] (II) intel(0): Output VGA1 using monitor section Monitor0
[ 1526.692] (**) intel(0): Option "PreferredMode" "1024x768_60.00"
[ 1526.939] (II) intel(0): Output TV1 has no monitor section
[ 1527.048] (II) intel(0): EDID for output VGA1
[ 1527.048] (II) intel(0): Manufacturer: SAM Model: 273 Serial#: 1296380217
[ 1527.048] (II) intel(0): Year: 2007 Week: 19
[ 1527.048] (II) intel(0): EDID Version: 1.3
[ 1527.048] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 1527.048] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 1527.049] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 1527.049] (II) intel(0): Gamma: 2.35
[ 1527.049] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 1527.049] (II) intel(0): First detailed timing is preferred mode
[ 1527.049] (II) intel(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 1527.049] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 1527.049] (II) intel(0): Supported established timings:
[ 1527.049] (II) intel(0): 720x400@70Hz
[ 1527.049] (II) intel(0): 640x480@60Hz
[ 1527.049] (II) intel(0): 640x480@67Hz
[ 1527.049] (II) intel(0): 640x480@72Hz
[ 1527.049] (II) intel(0): 640x480@75Hz
[ 1527.049] (II) intel(0): 800x600@56Hz
[ 1527.049] (II) intel(0): 800x600@60Hz
[ 1527.050] (II) intel(0): 800x600@72Hz
[ 1527.050] (II) intel(0): 800x600@75Hz
[ 1527.050] (II) intel(0): 832x624@75Hz
[ 1527.050] (II) intel(0): 1024x768@60Hz
[ 1527.050] (II) intel(0): 1024x768@70Hz
[ 1527.050] (II) intel(0): 1024x768@75Hz
[ 1527.050] (II) intel(0): 1280x1024@75Hz
[ 1527.050] (II) intel(0): 1152x864@75Hz
[ 1527.050] (II) intel(0): Manufacturer's mask: 0
[ 1527.050] (II) intel(0): Supported standard timings:
[ 1527.050] (II) intel(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1527.050] (II) intel(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 1527.050] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1527.050] (II) intel(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 1527.050] (II) intel(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1527.050] (II) intel(0): Supported detailed timing:
[ 1527.051] (II) intel(0): clock: 106.5 MHz Image Size: 410 x 257 mm
[ 1527.051] (II) intel(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1
904 h_border: 0
[ 1527.051] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934
v_border: 0
[ 1527.051] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, Pi
xClock max 145 MHz
[ 1527.051] (II) intel(0): Monitor name: SyncMaster
[ 1527.051] (II) intel(0): Serial No: HS1P500707
[ 1527.051] (II) intel(0): EDID (in hex):
[ 1527.051] (II) intel(0): 00ffffffffffff004c2d73023931454d
[ 1527.051] (II) intel(0): 131101030e291a872ade95a3544c9926
[ 1527.051] (II) intel(0): 0f5054bfef809500950f81808140714f
[ 1527.051] (II) intel(0): 0101010101019a29a0d0518422305098
[ 1527.052] (II) intel(0): 36009a011100001c000000fd00384b1e
[ 1527.052] (II) intel(0): 510e000a202020202020000000fc0053
[ 1527.052] (II) intel(0): 796e634d61737465720a2020000000ff
[ 1527.052] (II) intel(0): 00485331503530303730370a202000ed
[ 1527.052] (II) intel(0): Printing probed modes for output VGA1
[ 1527.052] (II) intel(0): Modeline "1024x768_60.00"x60.0 64.11 1024 1080 1184 1344
768 769 772 795 -hsync +vsync (47.7 kHz UP)
[ 1527.052] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900
903 909 934 -hsync +vsync (55.9 kHz eP)
[ 1527.052] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 102
4 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1527.052] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 102
4 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1527.053] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900
903 909 942 -hsync +vsync (70.6 kHz e)
[ 1527.053] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960
961 964 1000 +hsync +vsync (60.0 kHz e)
[ 1527.053] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864
865 868 900 +hsync +vsync (67.5 kHz e)
[ 1527.053] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768
769 772 800 +hsync +vsync (60.1 kHz e)
[ 1527.053] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768
771 777 806 -hsync -vsync (56.5 kHz e)
[ 1527.053] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768
771 777 806 -hsync -vsync (48.4 kHz e)
[ 1527.053] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625
628 667 -hsync -vsync (49.7 kHz e)
[ 1527.053] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637
643 666 +hsync +vsync (48.1 kHz e)
[ 1527.053] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601
604 625 +hsync +vsync (46.9 kHz e)
[ 1527.053] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601
605 628 +hsync +vsync (37.9 kHz e)
[ 1527.053] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601
603 625 +hsync +vsync (35.2 kHz e)
[ 1527.054] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 4
84 500 -hsync -vsync (37.5 kHz e)
[ 1527.054] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 4
91 520 -hsync -vsync (37.9 kHz e)
[ 1527.054] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 4
86 525 -hsync -vsync (35.0 kHz e)
[ 1527.054] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 4
92 525 -hsync -vsync (31.5 kHz e)
[ 1527.054] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 4
14 449 -hsync +vsync (31.5 kHz e)
[ 1527.275] (II) intel(0): EDID for output TV1
[ 1527.275] (II) intel(0): Output VGA1 connected
[ 1527.275] (II) intel(0): Output TV1 disconnected
[ 1527.275] (II) intel(0): Using user preference for initial modes
[ 1527.275] (II) intel(0): Output VGA1 using initial mode 1024x768_60.00
[ 1527.275] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise sta
ted.
[ 1527.276] (II) intel(0): Kernel page flipping support detected, enabling
[ 1527.276] (==) intel(0): DPI set to (96, 96)
[ 1527.276] (II) Loading sub module "fb"
[ 1527.276] (II) LoadModule: "fb"
[ 1527.276] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1527.277] (II) Module fb: vendor="X.Org Foundation"
[ 1527.277] compiled for 1.16.4, module version = 1.0.0
[ 1527.277] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1527.277] (II) Loading sub module "dri2"
[ 1527.277] (II) LoadModule: "dri2"
[ 1527.277] (II) Module "dri2" already built-in
[ 1527.277] (==) Depth 24 pixmap format is 32 bpp
[ 1527.277] (II) intel(0): [DRI2] Setup complete
[ 1527.277] (II) intel(0): [DRI2] DRI driver: i915
[ 1527.277] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 1527.278] (II) UXA(0): Driver registered support for the following operations:
[ 1527.278] (II) solid
[ 1527.278] (II) copy
[ 1527.278] (II) composite (RENDER acceleration)
[ 1527.278] (II) put_image
[ 1527.278] (II) get_image
[ 1527.278] (==) intel(0): Backing store enabled
[ 1527.278] (==) intel(0): Silken mouse enabled
[ 1527.278] (II) intel(0): Initializing HW Cursor
[ 1527.278] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled mess
age.
[ 1527.279] (==) intel(0): DPMS enabled
[ 1527.279] (==) intel(0): Intel XvMC decoder disabled
[ 1527.279] (II) intel(0): Set up textured video
[ 1527.279] (II) intel(0): Set up overlay video
[ 1527.279] (II) intel(0): direct rendering: DRI2 Enabled
[ 1527.279] (WW) intel(0): Option "SWCursor" is not used
[ 1527.279] (WW) intel(0): Option "NoDDC" is not used
[ 1527.279] (WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
[ 1527.279] (WW) intel(0): Option "EnablePageFlip" is not used
[ 1527.279] (WW) intel(0): Option "RenderAccel" is not used
[ 1527.279] (WW) intel(0): Option "PreferredMode" is not used
[ 1527.279] (==) intel(0): hotplug detection: "enabled"
[ 1527.304] (--) RandR disabled
[ 1527.329] (II) SELinux: Disabled on system
[ 1527.343] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1527.344] (II) AIGLX: enabled GLX_ARB_create_context
[ 1527.344] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1527.344] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1527.344] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1527.344] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1527.344] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1527.344] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1527.344] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1527.344] (II) AIGLX: Loaded and initialized i915
[ 1527.344] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1527.346] (II) intel(0): Setting screen physical size to 270 x 203
[ 1527.530] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1527.531] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1527.531] (II) LoadModule: "evdev"
[ 1527.531] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1527.532] (II) Module evdev: vendor="X.Org Foundation"
[ 1527.532] compiled for 1.16.0, module version = 2.9.0
[ 1527.533] Module class: X.Org XInput Driver
[ 1527.533] ABI class: X.Org XInput driver, version 21.0
[ 1527.533] (II) Using input driver 'evdev' for 'Power Button'
[ 1527.533] (**) Power Button: always reports core events
[ 1527.533] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 1527.533] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1527.533] (--) evdev: Power Button: Found keys
[ 1527.533] (II) evdev: Power Button: Configuring as keyboard
[ 1527.533] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input
/input5/event3"
[ 1527.533] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD,
id 6)
[ 1527.533] (**) Option "xkb_rules" "evdev"
[ 1527.533] (**) Option "xkb_model" "pc105"
[ 1527.533] (**) Option "xkb_layout" "us"
[ 1527.533] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1527.602] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1527.602] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1527.602] (II) Using input driver 'evdev' for 'Power Button'
[ 1527.603] (**) Power Button: always reports core events
[ 1527.603] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 1527.603] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1527.603] (--) evdev: Power Button: Found keys
[ 1527.603] (II) evdev: Power Button: Configuring as keyboard
[ 1527.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C
0C:00/input/input4/event2"
[ 1527.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD,
id 7)
[ 1527.603] (**) Option "xkb_rules" "evdev"
[ 1527.603] (**) Option "xkb_model" "pc105"
[ 1527.603] (**) Option "xkb_layout" "us"
[ 1527.603] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1527.606] (II) config/udev: Adding input device SEJIN SEJIN USB Mini Trackball Keybo
ard (/dev/input/event0)
[ 1527.606] (**) SEJIN SEJIN USB Mini Trackball Keyboard: Applying InputClass "evdev k
eyboard catchall"
[ 1527.606] (II) Using input driver 'evdev' for 'SEJIN SEJIN USB Mini Trackball Keyboa
rd'
[ 1527.606] (**) SEJIN SEJIN USB Mini Trackball Keyboard: always reports core events
[ 1527.606] (**) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Device: "/dev/input/e
vent0"
[ 1527.606] (--) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Vendor 0x510 Product
0x1004
[ 1527.606] (--) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Found keys
[ 1527.606] (II) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Configuring as keyboa
rd
[ 1527.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/
3-1/3-1:1.0/0003:0510:1004.0001/input/input2/event0"
[ 1527.606] (II) XINPUT: Adding extended input device "SEJIN SEJIN USB Mini Trackball
Keyboard" (type: KEYBOARD, id 8)
[ 1527.606] (**) Option "xkb_rules" "evdev"
[ 1527.607] (**) Option "xkb_model" "pc105"
[ 1527.607] (**) Option "xkb_layout" "us"
[ 1527.607] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1527.609] (II) config/udev: Adding input device SEJIN SEJIN USB Mini Trackball Keybo
ard (/dev/input/event1)
[ 1527.609] (**) SEJIN SEJIN USB Mini Trackball Keyboard: Applying InputClass "evdev p
ointer catchall"
[ 1527.609] (II) Using input driver 'evdev' for 'SEJIN SEJIN USB Mini Trackball Keyboa
rd'
[ 1527.609] (**) SEJIN SEJIN USB Mini Trackball Keyboard: always reports core events
[ 1527.609] (**) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Device: "/dev/input/e
vent1"
[ 1527.609] (--) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Vendor 0x510 Product
0x1004
[ 1527.609] (--) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Found 3 mouse buttons
[ 1527.609] (--) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Found relative axes
[ 1527.609] (--) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Found x and y relativ
e axes
[ 1527.609] (II) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Configuring as mouse
[ 1527.609] (**) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: YAxisMapping: buttons
4 and 5
[ 1527.609] (**) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: EmulateWheelButton: 4
, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1527.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/
3-1/3-1:1.1/0003:0510:1004.0002/input/input3/event1"
[ 1527.610] (II) XINPUT: Adding extended input device "SEJIN SEJIN USB Mini Trackball
Keyboard" (type: MOUSE, id 9)
[ 1527.610] (II) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: initialized for relat
ive axes.
[ 1527.610] (**) SEJIN SEJIN USB Mini Trackball Keyboard: (accel) keeping acceleration
scheme 1
[ 1527.610] (**) SEJIN SEJIN USB Mini Trackball Keyboard: (accel) acceleration profile
0
[ 1527.610] (**) SEJIN SEJIN USB Mini Trackball Keyboard: (accel) acceleration factor:
2.000
[ 1527.610] (**) SEJIN SEJIN USB Mini Trackball Keyboard: (accel) acceleration thresho
ld: 4
[ 1527.611] (II) config/udev: Adding input device SEJIN SEJIN USB Mini Trackball Keybo
ard (/dev/input/mouse0)
[ 1527.612] (II) No input driver specified, ignoring this device.
[ 1527.612] (II) This device may have been added with another device file.
[ 1527.612] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 1527.613] (II) No input driver specified, ignoring this device.
[ 1527.613] (II) This device may have been added with another device file.
[ 1559.198] (II) Server zapped. Shutting down.
[ 1559.373] (II) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Close
[ 1559.373] (II) UnloadModule: "evdev"
[ 1559.373] (II) evdev: SEJIN SEJIN USB Mini Trackball Keyboard: Close
[ 1559.374] (II) UnloadModule: "evdev"
[ 1559.374] (II) evdev: Power Button: Close
[ 1559.374] (II) UnloadModule: "evdev"
[ 1559.374] (II) evdev: Power Button: Close
[ 1559.374] (II) UnloadModule: "evdev"
[ 1559.432] (EE) Server terminated successfully (0). Closing log file.
root@telmat:~#
