bonjour tout le monde
voila, j’ai une carte acquisition analogique usb de marque kworld dvd maker livre avec moviesfactory 4 un soft sous windows et elle marche sous windows sauf que moi je commence a avoir mare de windows avec ses messages d’erreur …
bref
je suis sur ubuntu je cherche comment la faire fonctionner
que doit je fair SVP j’ai chercher un peut partout j’ai rien trouver
un coup de main SVP a un novice comme moi
merci
1ere étape:
branche ton appareil et poste ici le résultat de
lsusb
salut
voila;
lsusb :
Bus 007 Device 003: ID 064e:a101 Suyin Corp.
Bus 007 Device 002: ID eb1a:2820 eMPIA Technology, Inc. (c celle là)
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 0457:0151 Silicon Integrated Systems Corp. Super Flash 1GB Flash Drive
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 002: ID 15ca:00c3
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bon, maintenant on va voir si le “bon” module est chargé; une fois branché, poste le résultat de (log des évènements)
ainsi que (modules chargés)
ainsi que (modules disponibles) [je ne suis pas sur que ce soit le bon repertoire 
]
ainsi que (connexion avec le périphérique)
Avec ça on devrait avoir de quoi faire 
ok
là je suis au taf mais dés que je rentre je te fait signe ok
merci 
salut
désolé pour ce retard problème de connexion
bref;
dmesg
[ 31.180491] EISA bus registered
[ 31.180496] ACPI: bus type pci registered
[ 31.180716] PCI: Using configuration type 1
[ 31.180718] Setting up standard PCI resources
[ 31.182889] ACPI: EC: Look up EC in DSDT
[ 31.186544] ACPI: BIOS OSI(Linux) query ignored via DMI
[ 31.186547] ACPI: If “acpi_osi=Linux” works better, please notify linux-acpi@vger.kernel.org
[ 31.188629] ACPI: Interpreter enabled
[ 31.188632] ACPI: (supports S0 S3 S4 S5)
[ 31.188650] ACPI: Using IOAPIC for interrupt routing
[ 31.189891] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 31.242940] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 31.242943] ACPI: EC: driver started in interrupt mode
[ 31.243005] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 31.245263] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 31.245270] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 31.248223] PCI: Transparent bridge - 0000:00:1e.0
[ 31.248347] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PRT]
[ 31.248711] ACPI: PCI Interrupt Routing Table [_SB.PCI0.P32_.PRT]
[ 31.248885] ACPI: PCI Interrupt Routing Table [_SB.PCI0.EXP2.PRT]
[ 31.249056] ACPI: PCI Interrupt Routing Table [_SB.PCI0.EXP3.PRT]
[ 31.249225] ACPI: PCI Interrupt Routing Table [_SB.PCI0.EXP4.PRT]
[ 31.249408] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PEGP._PRT]
[ 31.258324] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.258483] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.258639] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.258794] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.258949] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 31.259105] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 31.259259] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.259418] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.259617] Linux Plug and Play Support v0.97 © Adam Belay
[ 31.259649] pnp: PnP ACPI init
[ 31.259657] ACPI: bus type pnp registered
[ 31.283734] pnp: PnP ACPI: found 10 devices
[ 31.283737] ACPI: ACPI bus type pnp unregistered
[ 31.283740] PnPBIOS: Disabled by ACPI PNP
[ 31.283965] PCI: Using ACPI for IRQ routing
[ 31.283968] PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report
[ 31.303393] NET: Registered protocol family 8
[ 31.303395] NET: Registered protocol family 20
[ 31.303435] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 31.303440] hpet0: 3 64-bit timers, 14318180 Hz
[ 31.304477] AppArmor: AppArmor Filesystem Enabled
[ 31.307258] Time: tsc clocksource has been installed.
[ 31.307276] Switched to high resolution mode on CPU 0
[ 31.307381] Switched to high resolution mode on CPU 1
[ 31.320245] system 00:01: ioport range 0x164e-0x164f has been reserved
[ 31.320250] system 00:01: ioport range 0x600-0x60f has been reserved
[ 31.320253] system 00:01: ioport range 0x610-0x610 has been reserved
[ 31.320256] system 00:01: ioport range 0x800-0x80f has been reserved
[ 31.320259] system 00:01: ioport range 0x810-0x817 has been reserved
[ 31.320261] system 00:01: ioport range 0x400-0x47f has been reserved
[ 31.320264] system 00:01: ioport range 0x500-0x53f has been reserved
[ 31.320268] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 31.320271] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 31.320274] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 31.320277] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 31.320281] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 31.320284] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 31.320287] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 31.320290] system 00:01: iomem range 0x32000000-0x320000ff could not be reserved
[ 31.350765] PCI: Failed to allocate mem resource #6:20000@90000000 for 0000:01:00.0
[ 31.350768] PCI: Bridge: 0000:00:01.0
[ 31.350771] IO window: 5000-5fff
[ 31.350775] MEM window: 90000000-92ffffff
[ 31.350779] PREFETCH window: 80000000-8fffffff
[ 31.350783] PCI: Bridge: 0000:00:1c.0
[ 31.350788] IO window: 4000-4fff
[ 31.350801] MEM window: 9a300000-9b2fffff
[ 31.350810] PREFETCH window: 93000000-93ffffff
[ 31.350823] PCI: Bridge: 0000:00:1c.1
[ 31.350828] IO window: 3000-3fff
[ 31.350838] MEM window: 99300000-9a2fffff
[ 31.350848] PREFETCH window: 94000000-94ffffff
[ 31.350861] PCI: Bridge: 0000:00:1c.2
[ 31.350866] IO window: 2000-2fff
[ 31.350879] MEM window: 98200000-992fffff
[ 31.350888] PREFETCH window: 95000000-95ffffff
[ 31.350901] PCI: Bridge: 0000:00:1c.3
[ 31.350906] IO window: 1000-1fff
[ 31.350919] MEM window: 97100000-981fffff
[ 31.350929] PREFETCH window: 96000000-96ffffff
[ 31.350942] PCI: Bridge: 0000:00:1e.0
[ 31.350944] IO window: disabled.
[ 31.350954] MEM window: 97000000-970fffff
[ 31.350963] PREFETCH window: disabled.
[ 31.350988] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.350994] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 31.351048] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.351059] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 31.351116] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 31.351125] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 31.351183] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 31.351191] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 31.351249] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 31.351258] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 31.351291] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 31.351305] NET: Registered protocol family 2
[ 31.388230] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 31.388470] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 31.388930] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 31.389150] TCP: Hash tables configured (established 131072 bind 65536)
[ 31.389153] TCP reno registered
[ 31.400298] checking if image is initramfs… it is
[ 32.184501] Freeing initrd memory: 7687k freed
[ 32.185278] audit: initializing netlink socket (disabled)
[ 32.185291] audit(1218838098.648:1): initialized
[ 32.185502] highmem bounce pool size: 64 pages
[ 32.187617] VFS: Disk quotas dquot_6.5.1
[ 32.187697] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 32.187844] io scheduler noop registered
[ 32.187846] io scheduler anticipatory registered
[ 32.187848] io scheduler deadline registered
[ 32.187860] io scheduler cfq registered (default)
[ 32.188267] Boot video device is 0000:01:00.0
[ 32.188389] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.188433] assign_interrupt_mode Found MSI capability
[ 32.188469] Allocate Port Service[0000:00:01.0:pcie00]
[ 32.188504] Allocate Port Service[0000:00:01.0:pcie02]
[ 32.188602] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 32.188749] assign_interrupt_mode Found MSI capability
[ 32.188865] Allocate Port Service[0000:00:1c.0:pcie00]
[ 32.188898] Allocate Port Service[0000:00:1c.0:pcie02]
[ 32.189105] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 32.189252] assign_interrupt_mode Found MSI capability
[ 32.189368] Allocate Port Service[0000:00:1c.1:pcie00]
[ 32.189400] Allocate Port Service[0000:00:1c.1:pcie02]
[ 32.189614] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 32.189762] assign_interrupt_mode Found MSI capability
[ 32.189877] Allocate Port Service[0000:00:1c.2:pcie00]
[ 32.189910] Allocate Port Service[0000:00:1c.2:pcie02]
[ 32.190114] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 32.190263] assign_interrupt_mode Found MSI capability
[ 32.190376] Allocate Port Service[0000:00:1c.3:pcie00]
[ 32.190408] Allocate Port Service[0000:00:1c.3:pcie02]
[ 32.190774] isapnp: Scanning for PnP cards…
[ 32.548509] isapnp: No Plug & Play device found
[ 32.575121] Real Time Clock Driver v1.12ac
[ 32.575338] hpet_resources: 0xfed00000 is busy
[ 32.575401] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 32.576705] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 32.576773] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 32.576879] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 32.609885] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 32.609890] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 32.630561] mice: PS/2 mouse device common for all mice
[ 32.630673] EISA: Probing bus 0 at eisa.0
[ 32.630682] Cannot allocate resource for EISA slot 1
[ 32.630685] Cannot allocate resource for EISA slot 2
[ 32.630687] Cannot allocate resource for EISA slot 3
[ 32.630689] Cannot allocate resource for EISA slot 4
[ 32.630691] Cannot allocate resource for EISA slot 5
[ 32.630693] Cannot allocate resource for EISA slot 6
[ 32.630709] EISA: Detected 0 cards.
[ 32.630712] cpuidle: using governor ladder
[ 32.630714] cpuidle: using governor menu
[ 32.630799] NET: Registered protocol family 1
[ 32.630827] Using IPI No-Shortcut mode
[ 32.630856] registered taskstats version 1
[ 32.630990] Magic number: 4:538:148
[ 32.631012] hash matches device ttyp2
[ 32.631053] hash matches device device:19
[ 32.631060] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 32.631063] EDD information not available.
[ 32.631259] Freeing unused kernel memory: 364k freed
[ 32.650963] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 33.875235] fuse init (API version 7.9)
[ 33.900622] ACPI: SSDT 7FE7AE10, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 33.900918] ACPI: SSDT 7FE79610, 05D7 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 33.902894] Monitor-Mwait will be used to enter C-1 state
[ 33.902897] Monitor-Mwait will be used to enter C-2 state
[ 33.902900] Monitor-Mwait will be used to enter C-3 state
[ 33.903025] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 33.903030] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 33.903288] ACPI: SSDT 7FE7CD10, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 33.903562] ACPI: SSDT 7FE7CC10, 0083 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 33.904616] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 33.904622] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 33.907977] ACPI: Thermal Zone [TZ01] (40 C)
[ 34.060279] usbcore: registered new interface driver usbfs
[ 34.060306] usbcore: registered new interface driver hub
[ 34.069712] usbcore: registered new device driver usb
[ 34.074377] USB Universal Host Controller Interface driver v3.0
[ 34.074431] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.074448] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 34.074455] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 34.074676] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 34.074723] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060a0
[ 34.074874] usb usb1: configuration #1 chosen from 1 choice
[ 34.074900] hub 1-0:1.0: USB hub found
[ 34.074905] hub 1-0:1.0: 2 ports detected
[ 34.181755] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 34.181774] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 34.181781] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 34.181809] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 34.181855] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006080
[ 34.181992] usb usb2: configuration #1 chosen from 1 choice
[ 34.182020] hub 2-0:1.0: USB hub found
[ 34.182026] hub 2-0:1.0: 2 ports detected
[ 34.285677] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 34.285694] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 34.285701] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 34.285726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 34.285772] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00006060
[ 34.285898] usb usb3: configuration #1 chosen from 1 choice
[ 34.285923] hub 3-0:1.0: USB hub found
[ 34.285929] hub 3-0:1.0: 2 ports detected
[ 34.389653] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 34.389671] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 34.389678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 34.389703] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 34.389750] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006040
[ 34.389874] usb usb4: configuration #1 chosen from 1 choice
[ 34.389901] hub 4-0:1.0: USB hub found
[ 34.389907] hub 4-0:1.0: 2 ports detected
[ 34.448069] SCSI subsystem initialized
[ 34.493550] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 34.493569] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 34.493576] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 34.493602] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 34.493653] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006020
[ 34.493785] usb usb5: configuration #1 chosen from 1 choice
[ 34.493812] hub 5-0:1.0: USB hub found
[ 34.493817] hub 5-0:1.0: 2 ports detected
[ 34.528357] libata version 3.00 loaded.
[ 34.597652] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 34.597666] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 34.597673] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 34.597705] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 34.601642] ehci_hcd 0000:00:1a.7: debug port 1
[ 34.601654] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 34.601661] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x9b304400
[ 34.629403] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 34.641385] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 34.641510] usb usb6: configuration #1 chosen from 1 choice
[ 34.641537] hub 6-0:1.0: USB hub found
[ 34.641544] hub 6-0:1.0: 4 ports detected
[ 34.745452] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[ 34.745472] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 34.745478] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 34.745504] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 34.749425] ehci_hcd 0000:00:1d.7: debug port 1
[ 34.749439] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 34.749446] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x9b304000
[ 34.765316] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 34.765422] usb usb7: configuration #1 chosen from 1 choice
[ 34.765448] hub 7-0:1.0: USB hub found
[ 34.765454] hub 7-0:1.0: 6 ports detected
[ 34.869405] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 22
[ 34.869420] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 34.922913] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[97000000-970007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 34.928136] tg3.c:v3.86 (November 9, 2007)
[ 34.928225] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 34.928243] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 34.974209] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:38:5f:49:72
[ 34.974217] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 34.974220] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 34.986074] ata_piix 0000:00:1f.1: version 2.12
[ 34.986098] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 34.986147] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 34.987203] scsi0 : ata_piix
[ 34.987613] scsi1 : ata_piix
[ 34.988244] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60e0 irq 14
[ 34.988247] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60e8 irq 15
[ 35.103068] APIC error on CPU0: 00(40)
[ 35.177094] usb 3-1: device not accepting address 2, error -71
[ 35.305524] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.61, max UDMA/33
[ 35.477372] ata1.00: configured for UDMA/33
[ 35.532890] Clocksource tsc unstable (delta = -9065712980 ns)
[ 35.536883] Time: hpet clocksource has been installed.
[ 35.559337] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.61 PQ: 0 ANSI: 5
[ 35.559448] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 35.572339] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 35.572398] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 35.572529] scsi2 : ata_piix
[ 35.572716] scsi3 : ata_piix
[ 35.584955] usb 7-3: new high speed USB device using ehci_hcd and address 3
[ 35.718360] usb 7-3: configuration #1 chosen from 1 choice
[ 35.865293] ieee1394: Host added: ID:BUS[0-00:1023] GUID[c7416ee000023f79]
[ 35.879877] usb 7-4: new high speed USB device using ehci_hcd and address 4
[ 35.896390] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x6114 bmdma 0x60d0 irq 19
[ 35.896394] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6110 bmdma 0x60d8 irq 19
[ 36.018072] usb 7-4: configuration #1 chosen from 1 choice
[ 36.057260] ata3.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 36.057268] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 36.074265] ata3.00: configured for UDMA/100
[ 36.164554] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 36.177603] Driver ‘sr’ needs updating - please use bus_type methods
[ 36.179066] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 36.179115] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 36.179119] Uniform CD-ROM driver Revision: 3.20
[ 36.179171] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 36.184523] Driver ‘sd’ needs updating - please use bus_type methods
[ 36.184598] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 36.184611] sd 2:0:0:0: [sda] Write Protect is off
[ 36.184614] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.184632] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 36.184683] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 36.184694] sd 2:0:0:0: [sda] Write Protect is off
[ 36.184696] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.184714] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 36.184718] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 36.186348] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 36.347553] usb 3-1: configuration #1 chosen from 1 choice
[ 36.365829] usbcore: registered new interface driver hiddev
[ 36.380747] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input2
[ 36.403035] input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1
[ 36.403055] usbcore: registered new interface driver usbhid
[ 36.403060] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 36.608327] sda1 sda2 < sda5 >
[ 36.631509] sd 2:0:0:0: [sda] Attached SCSI disk
[ 36.824754] Attempting manual resume
[ 36.824758] swsusp: Resume From Partition 8:5
[ 36.824759] PM: Checking swsusp image.
[ 36.824995] PM: Resume from disk failed.
[ 36.878076] kjournald starting. Commit interval 5 seconds
[ 36.878124] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.211618] APIC error on CPU0: 40(40)
[ 45.116161] iTCO_vendor_support: vendor-support=0
[ 45.184259] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 45.244906] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.280158] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 45.312052] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 45.312145] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 45.312190] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 45.398581] Linux agpgart interface v0.102
[ 45.553435] ACPI: WMI-Acer: Mapper loaded
[ 45.584456] input: Power Button (FF) as /devices/virtual/input/input4
[ 45.635810] ACPI: Power Button (FF) [PWRF]
[ 45.635889] input: Power Button (CM) as /devices/virtual/input/input5
[ 45.667767] ACPI: Power Button (CM) [PWRB]
[ 45.667830] input: Lid Switch as /devices/virtual/input/input6
[ 45.683866] ACPI: Lid Switch [LID0]
[ 45.683935] input: Sleep Button (CM) as /devices/virtual/input/input7
[ 45.747728] ACPI: Sleep Button (CM) [SLPB]
[ 45.799209] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[ 45.799216] acer_acpi: Detected Acer WMID interface
[ 45.980054] input: PS/2 Mouse as /devices/virtual/input/input8
[ 46.068350] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 46.133315] sdhci: Secure Digital Host Controller Interface driver
[ 46.133319] sdhci: Copyright© Pierre Ossman
[ 46.133361] sdhci: SDHCI controller found at 0000:07:00.1 [1180:0822] (rev 22)
[ 46.133403] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 23
[ 46.133426] sdhci:slot0: Will use DMA mode even though HW doesn’t fully claim to support it.
[ 46.133437] PCI: Setting latency timer of device 0000:07:00.1 to 64
[ 46.133507] mmc0: SDHCI at 0x97000a00 irq 23 DMA
[ 46.181990] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:34/LNXVIDEO:00/input/input10
[ 46.202479] ACPI: AC Adapter [AC] (on-line)
[ 46.243451] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 46.353478] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[ 46.376350] iwl3945: Intel® PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 46.376353] iwl3945: Copyright© 2003-2007 Intel Corporation
[ 46.376501] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 46.376517] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 46.376542] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 46.387336] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 46.720962] APIC error on CPU0: 40(40)
[ 46.763201] ACPI: Battery Slot [BAT0] (battery present)
[ 47.077904] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[ 47.077932] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 47.080495] Linux video capture interface: v2.00
[ 47.109695] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS…
[ 47.159950] em28xx v4l2 driver version 0.0.1 loaded
[ 47.159989] em28xx new video device (eb1a:2820): interface 0, class 255
[ 47.159996] em28xx #0: Alternate settings: 8
[ 47.159998] em28xx #0: Alternate setting 0, max size= 0
[ 47.160000] em28xx #0: Alternate setting 1, max size= 1024
[ 47.160002] em28xx #0: Alternate setting 2, max size= 1448
[ 47.160005] em28xx #0: Alternate setting 3, max size= 2048
[ 47.160007] em28xx #0: Alternate setting 4, max size= 2304
[ 47.160009] em28xx #0: Alternate setting 5, max size= 2580
[ 47.160011] em28xx #0: Alternate setting 6, max size= 2892
[ 47.160013] em28xx #0: Alternate setting 7, max size= 3072
[ 47.343358] APIC error on CPU0: 40(40)
[ 47.907763] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 48.133978] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 48.135475] wmaster0: Selected rate control algorithm ‘iwl-3945-rs’
[ 48.993824] registered VBI
[ 49.005746] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 49.005751] em28xx #0: Found MSI VOX USB 2.0
[ 49.005786] usbcore: registered new interface driver em28xx
[ 49.005823] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
[ 49.007551] usbcore: registered new interface driver uvcvideo
[ 49.007555] USB Video Class driver (v0.1.0)
[ 49.206926] lp: driver loaded but no devices found
[ 49.343102] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k
[ 49.745977] EXT3 FS on sda1, internal journal
[ 50.509552] ip_tables: © 2000-2006 Netfilter Core Team
[ 51.028560] No dock devices found.
[ 52.054328] apm: BIOS not found.
[ 52.185145] ppdev: user-space parallel port driver
[ 52.347437] audit(1218838130.027:2): type=1503 operation=“inode_permission” requested_mask=“a::” denied_mask=“a::” name="/dev/tty" pid=5287 profile="/usr/sbin/cupsd" namespace=“default”
[ 53.331222] APIC error on CPU0: 40(40)
[ 54.329026] Bluetooth: Core ver 2.11
[ 54.329510] NET: Registered protocol family 31
[ 54.329514] Bluetooth: HCI device and connection manager initialized
[ 54.329564] Bluetooth: HCI socket layer initialized
[ 54.389820] Bluetooth: L2CAP ver 2.9
[ 54.389826] Bluetooth: L2CAP socket layer initialized
[ 54.455783] Bluetooth: RFCOMM socket layer initialized
[ 54.455799] Bluetooth: RFCOMM TTY layer initialized
[ 54.455802] Bluetooth: RFCOMM ver 1.8
[ 54.763310] NET: Registered protocol family 17
[ 59.981260] APIC error on CPU0: 40(40)
[ 60.200165] APIC error on CPU0: 40(40)
[ 65.425467] NET: Registered protocol family 10
[ 65.426193] lo: Disabled Privacy Extensions
[ 65.427260] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 65.428945] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 71.040441] CPU0 attaching NULL sched-domain.
[ 71.040447] CPU1 attaching NULL sched-domain.
[ 71.072341] CPU0 attaching sched-domain:
[ 71.072347] domain 0: span 03
[ 71.072350] groups: 01 02
[ 71.072354] CPU1 attaching sched-domain:
[ 71.072356] domain 0: span 03
[ 71.072358] groups: 02 01
[ 72.052502] APIC error on CPU0: 40(40)
[ 72.972317] APIC error on CPU0: 40(40)
[ 74.877943] UDF-fs: No VRS found
[ 74.883177] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 74.884041] ISOFS: changing to secondary root
lsmod
Module Size Used by
isofs 36388 1
udf 88612 0
ipv6 267780 10
af_packet 23812 2
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
acpi_cpufreq 10796 1
cpufreq_ondemand 9740 1
cpufreq_stats 7104 0
cpufreq_powersave 2688 0
cpufreq_conservative 8712 0
freq_table 5536 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_userspace 5284 0
container 5632 0
dock 11280 0
sbs 15112 0
sbshc 7680 1 sbs
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
sbp2 24072 0
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
arc4 2944 2
ecb 4480 2
blkcipher 8324 1 ecb
joydev 13120 0
tuner 42912 0
tea5767 6788 1 tuner
tda8290 12420 1 tuner
tuner_simple 10248 1 tuner
mt20xx 13192 1 tuner
tea5761 6020 1 tuner
saa7115 16656 0
uvcvideo 58116 0
em28xx 48936 0
compat_ioctl32 2304 2 uvcvideo,em28xx
ir_common 36100 1 em28xx
videodev 29440 2 uvcvideo,em28xx
snd_hda_intel 344600 3
v4l1_compat 15492 3 uvcvideo,em28xx,videodev
v4l2_common 18304 5 tuner,saa7115,uvcvideo,em28xx,videodev
tveeprom 16656 1 em28xx
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
snd_seq_dummy 4868 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
battery 14212 0
snd_rawmidi 25760 1 snd_seq_midi
iwl3945 89844 0
iwlwifi_mac80211 219108 1 iwl3945
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
ac 6916 0
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
sdhci 19076 0
cfg80211 15112 1 iwlwifi_mac80211
video 19856 0
output 4736 1 video
i2c_core 24832 9 tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761,saa7115,em28xx,tveeprom
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
serio_raw 7940 0
acer_acpi 18112 0
led_class 6020 1 acer_acpi
mmc_core 51460 1 sdhci
intel_agp 25492 0
button 9232 0
wmi_acer 9644 1 acer_acpi
snd 56996 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
agpgart 34760 1 intel_agp
psmouse 40336 0
evdev 13056 8
iTCO_wdt 13092 0
pcspkr 4224 0
shpchp 34452 0
pci_hotplug 30880 1 shpchp
soundcore 8800 1 snd
iTCO_vendor_support 4868 1 iTCO_wdt
ext3 136712 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
usbhid 31872 0
hid 38784 1 usbhid
sg 36880 0
sd_mod 30720 3
sr_mod 17956 1
cdrom 37408 1 sr_mod
pata_acpi 8320 0
ata_piix 19588 3
ata_generic 8324 0
ohci1394 33584 0
libata 159344 3 pata_acpi,ata_piix,ata_generic
ieee1394 93752 2 sbp2,ohci1394
scsi_mod 151436 5 sbp2,sg,sd_mod,sr_mod,libata
tg3 116228 0
ehci_hcd 37900 0
uhci_hcd 27024 0
usbcore 146028 6 uvcvideo,em28xx,usbhid,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 4 acpi_cpufreq,thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 3
ls /lib/modules/‘uname -r’/kernel/drivers/media/video*
adv7170.ko hexium_orion.ko sn9c102 v4l2-common.ko
adv7175.ko ir-kbd-i2c.ko stradis.ko v4l2-int-device.ko
bt819.ko ivtv stv680.ko videobuf-core.ko
bt856.ko ks0127.ko tcm825x.ko videobuf-dma-sg.ko
bt866.ko meye.ko tda7432.ko videobuf-dvb.ko
bt8xx msp3400.ko tda8290.ko videobuf-vmalloc.ko
btcx-risc.ko mt20xx.ko tda9840.ko videocodec.ko
bw-qcam.ko ov7670.ko tda9875.ko videodev.ko
cafe_ccic.ko ovcamchip tea5761.ko vivi.ko
compat_ioctl32.ko pms.ko tea5767.ko vp27smpx.ko
cpia2 pvrusb2 tea6415c.ko vpx3220.ko
cpia.ko pwc tea6420.ko w9966.ko
cpia_pp.ko saa5246a.ko tlv320aic23b.ko w9968cf.ko
cpia_usb.ko saa5249.ko tuner-3036.ko wm8739.ko
c-qcam.ko saa6588.ko tuner.ko wm8775.ko
cs53l32a.ko saa7110.ko tuner-simple.ko zc0301
cx2341x.ko saa7111.ko tvaudio.ko zr36016.ko
cx23885 saa7114.ko tveeprom.ko zr36050.ko
cx25840 saa7115.ko tvp5150.ko zr36060.ko
cx88 saa7127.ko upd64031a.ko zr36067.ko
dabusb.ko saa7134 upd64083.ko zr364xx.ko
em28xx saa7185.ko usbvideo
et61x251 saa7191.ko usbvision
hexium_gemini.ko se401.ko v4l1-compat.ko
ls -lh /dev/video
crw-rw----+ 1 root video 81, 0 2008-08-15 23:08 /dev/video0
crw-rw----+ 1 root video 81, 1 2008-08-15 23:08 /dev/video1
voila en gros ce que sa donne 
merci
Pour nous donner une réponse vraiment interessante il vaut mieux l’utiliser ainsi[quote]# dmesg | tail -10[/quote] 5 secondes après avoir branché ta carte à chaud.
voila;
code: dmesg | tail -10
[ 223.863115] em28xx #0: Alternate setting 3, max size= 2048
[ 223.863118] em28xx #0: Alternate setting 4, max size= 2304
[ 223.863120] em28xx #0: Alternate setting 5, max size= 2580
[ 223.863123] em28xx #0: Alternate setting 6, max size= 2892
[ 223.863125] em28xx #0: Alternate setting 7, max size= 3072
[ 224.395714] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 224.550148] registered VBI
[ 224.559276] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
[ 224.559284] em28xx #0: Found MSI VOX USB 2.0
[ 224.559321] usbcore: registered new interface driver em28xx
Apparement le noyau charge tout seul le bon module (em28xx).
(je ne sais pas s’ils sont tous nécessaires, ni s’il en manque…)
mencoder -v tv:// -tv driver=v4l2:device=/dev/video1:outfmt=i420:width=640:height=480:forceaudio:adevice=/dev/dsp1
-ovc lavc -lavcopts acodec=mp3:abitrate=112:vbitrate=950:mbd=2 -oac lavc -vf lavcdeint -o video.avi
Sinon je te conseille de potasser un peu les 2 liens:
mcentral.de/wiki/index.php5/Em2820
mcentral.de/wiki/index.php5/Em2880_FAQ3
OK merci
je te ferrai signe dés mon retour
salut
[quote=“msfk57”]Apparement le noyau charge tout seul le bon module (em28xx).
(je ne sais pas s’ils sont tous nécessaires, ni s’il en manque…)
mencoder -v tv:// -tv driver=v4l2:device=/dev/video1:outfmt=i420:width=640:height=480:forceaudio:adevice=/dev/dsp1
-ovc lavc -lavcopts acodec=mp3:abitrate=112:vbitrate=950:mbd=2 -oac lavc -vf lavcdeint -o video.avi
Sinon je te conseille de potasser un peu les 2 liens:
mcentral.de/wiki/index.php5/Em2820
mcentral.de/wiki/index.php5/Em2880_FAQ3[/quote]
aptitude install v4l-conf v4l2ucp xserver-xorg-video-v4l
Impossible de trouver un paquet dont le nom ou la description correspond à « v4l2ucp » pour les autres pacquet c ok !
v4lctl list
ioctl: VIDIOC_G_STD(std=0x804eaa7bf8f3e48 [PAL_H,PAL_D1,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,?ATSC_8_VSB,ATSC_16_VSB,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)]): Invalid argument
attribute | type | current | default | comment
-----------+--------+---------+---------+-------------------------------------
norm | choice | (null) | (null) |
input | choice | Camera | Camera | Camera 1
bright | int | 8 | 8 | range is 0 => 255
contrast | int | 32 | 32 | range is 0 => 255
color | int | 30 | 30 | range is 0 => 100
hue | int | 0 | 0 | range is -40 => 40
Gamma | int | 50 | 50 | range is 1 => 80
Backlight | int | 0 | 0 | range is 0 => 1
Power Line | choice | 60 Hz | 60 Hz | Disabled 50 Hz 60 Hz
Sharpness | int | 3 | 3 | range is 0 => 31
mencoder -v tv:// -tv driver=v4l2:device=/dev/video1:outfmt=i420:width=640:height=480:forceaudio:adevice=/dev/dsp1
-ovc lavc -lavcopts acodec=mp3:abitrate=112:vbitrate=950:mbd=2 -oac lavc -vf lavcdeint -o video.avi
[code]MEncoder 2:1.0~rc2-0ubuntu13+medibuntu1 © 2000-2007 MPlayer Team
CPU: Intel® Core™2 Duo CPU T5250 @ 1.50GHz (Family: 6, Model: 15, Stepping: 13)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Exiting… (No output file specified, please see the -o option.)
fcontacte@fcontacte-laptop:~$ -ovc lavc -lavcopts acodec=mp3:abitrate=112:vbitrate=950:mbd=2 -oac lavc -vf lavcdeint -o video.avi[/code]
1/ Tu n’as pas d’autre appareil vidéo branché quand tu fait ‘v4lctl list’ ? parce que là il a plutot l’air de détecter une webcam qu’une carte d’acquisition 
2/ pour executer la 2e commande correctement, il faut que tout soit sur la même ligne !
sinon copie CE code (je rajoute “” à la fin de la 1ere ligne pour lui dire d’attendre la 2e avant d’executer la commande):
mencoder -v tv:// -tv driver=v4l2:device=/dev/video1:outfmt=i420:width=640:height=480:forceaudio:adevice=/dev/dsp1 \
-ovc lavc -lavcopts acodec=mp3:abitrate=112:vbitrate=950:mbd=2 -oac lavc -vf lavcdeint -o video.avi
oué c une cam interger ( crystal eye )
mencoder -v tv:// -tv driver=v4l2:device=/dev/video1:outfmt=i420:width=640:height=480:forceaudio:adevice=/dev/dsp1 \
-ovc lavc -lavcopts acodec=mp3:abitrate=112:vbitrate=950:mbd=2 -oac lavc -vf lavcdeint -o video.avi
MEncoder 2:1.0~rc2-0ubuntu13+medibuntu1 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz (Family: 6, Model: 15, Stepping: 13)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Configuration: --enable-runtime-cpudetection --target=i586-linux --prefix=/usr --confdir=/etc/mplayer --mandir=/usr/share/man --win32codecsdir=/usr/lib/win32 --enable-largefiles --disable-libdvdcss-internal --enable-smb --enable-ftp --enable-cdparanoia --enable-radio --enable-lirc --enable-joystick --enable-xf86keysym --disable-tremor-internal --enable-liba52 --enable-musepack --enable-speex --enable-libvorbis --enable-mad --enable-mp3lib --enable-theora --enable-libdv --enable-libmpeg2 --enable-tv-v4l2 --enable-alsa --enable-ossaudio --enable-esd --enable-arts --enable-pulse --enable-nas --enable-xinerama --enable-menu --enable-xv --enable-vm --enable-gl --enable-xmga --enable-mga --enable-3dfx --enable-tdfxfb --enable-sdl --enable-aa --enable-caca --enable-dxr3 --enable-xvmc --with-xvmclib=XvMCW --enable-ggi --enable-fbdev --enable-freetype --enable-gif --enable-png --enable-jpeg --enable-liblzo --enable-fribidi --enable-ladspa --enable-libamr_nb --enable-libamr_wb --enable-faac --enable-gui --enable-mencoder
init_freetype
get_path('font/font.desc') -> '/home/fcontacte/.mplayer/font/font.desc'
font: can't open file: /home/fcontacte/.mplayer/font/font.desc
font: can't open file: /usr/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
STREAM: [tv] tv://
STREAM: Description: TV Input
STREAM: Author: Benjamin Zores, Albeu
STREAM: Comment:
success: format: 9 data: 0x0 - 0x0
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: MSI VOX USB 2.0
Tuner cap:
Tuner rxs:
Capabilites: video capture tuner audio read/write streaming
supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-M;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Format YUYV (16 bits, Packed YUY2): Packed YUY2
Current format: YUYV
v4l2: current audio mode is : MONO
v4l2: set format: YUV420
v4l2: set input: 0
Selected norm : pal
v4l2: set norm: PAL
v4l2: set width: 640
v4l2: set height: 480
Selected channel list: europe-east (including 133 channels)
Current frequency: 9076 (567.250)
==> Found video stream: 0
v4l2: get format: YUYV
v4l2: get fps: 25.000000
v4l2: get width: 640
v4l2: get height: 480
Unable to open '/dev/dsp1': No such file or directory
v4l2: set audio samplerate: 44100
Unable to open '/dev/dsp1': No such file or directory
Unable to open '/dev/dsp1': No such file or directory
v4l2: 0 frames successfully processed, 0 frames dropped.
v4l2: up to 0 video frames buffered.
Erreur de segmentation
Du coup ta carte n’est pas encore reconnue …
je fait quoi alors ! 
j’ai pas envie de retourner sous windows rien que pour cette carte sincèrement
merci
Je dois t’avouer que là ça sort de mes capacités;
En tout cas bon courrage, et désolé de ne pas pouvoir t’aider plus pour le moment.
ok je te remercie pour ton aide
salut
bonjour j’ai suivi un tuto et
enfin ma carte est reconnue avec Xawtv sauf que …
impossible enregistrer ( init impossible ) et ya pas de Pal sauf NTSC
comment faire pour configurer pour qu’il marche de façon optimale avec ma carte d’acquisition usb2
merci
“elle est reconnue” : Tant mieux.
Mais sans plus d’information ça va être dur.
Peut-tu mettre le lien du tuto que tu as suivit ?
Est-ce que tu as quelque chose de nouveau avec v4lctl list par rapport à avant ?
v4lctl list
attribute | type | current | default | comment
-----------+--------+---------+---------+-------------------------------------
norm | choice | NTSC | NTSC | NTSC
input | choice | Televis | Televis | Television Composite1 S-Video
audio mode | choice | mono | mono | mono stereo lang1 lang2
bright | int | 0 | 0 | range is -128 => 127
contrast | int | 16 | 16 | range is 0 => 31
color | int | 16 | 16 | range is 0 => 31
volume | int | 31 | 31 | range is 0 => 31
mute | bool | on | on |
Red chroma | int | 0 | 0 | range is -128 => 127
Blue chrom | int | 0 | 0 | range is -128 => 127
Gamma | int | 32 | 32 | range is 0 => 63