Bonjour,
Voici le retour de commande passée dans le Terminal Utilisateur:
dmesg
[ 0.269908] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
[ 0.269910] pci_bus 0000:06: resource 1 mem: [0xc0600000-0xc07fffff]
[ 0.269912] pci_bus 0000:06: resource 2 pref mem [0xc0800000-0xc09fffff]
[ 0.269914] pci_bus 0000:07: resource 0 io: [0x4000-0x4fff]
[ 0.269916] pci_bus 0000:07: resource 1 mem: [0xc0a00000-0xc0bfffff]
[ 0.269919] pci_bus 0000:07: resource 2 pref mem [0xc0c00000-0xc0dfffff]
[ 0.269921] pci_bus 0000:08: resource 0 io: [0xe000-0xefff]
[ 0.269923] pci_bus 0000:08: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.269925] pci_bus 0000:08: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.269928] pci_bus 0000:09: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.269930] pci_bus 0000:09: resource 3 io: [0x00-0xffff]
[ 0.269932] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.269960] NET: Registered protocol family 2
[ 0.270107] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.271211] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.275060] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.275565] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.275568] TCP reno registered
[ 0.275683] NET: Registered protocol family 1
[ 0.275860] pci 0000:01:00.0: Boot video device
[ 0.275947] Unpacking initramfs...
[ 0.494802] Freeing initrd memory: 9096k freed
[ 0.498771] Simple Boot Flag at 0x51 set to 0x1
[ 0.499104] audit: initializing netlink socket (disabled)
[ 0.499118] type=2000 audit(1334415228.495:1): initialized
[ 0.502161] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.503439] VFS: Disk quotas dquot_6.5.2
[ 0.503487] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.503568] msgmni has been set to 7934
[ 0.503744] alg: No test for stdrng (krng)
[ 0.503788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.503791] io scheduler noop registered
[ 0.503793] io scheduler anticipatory registered
[ 0.503795] io scheduler deadline registered
[ 0.503847] io scheduler cfq registered (default)
[ 0.503972] alloc irq_desc for 24 on node -1
[ 0.503974] alloc kstat_irqs on node -1
[ 0.503984] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.503990] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.504106] alloc irq_desc for 25 on node -1
[ 0.504107] alloc kstat_irqs on node -1
[ 0.504115] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.504125] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.504263] alloc irq_desc for 26 on node -1
[ 0.504265] alloc kstat_irqs on node -1
[ 0.504273] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.504283] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.504426] alloc irq_desc for 27 on node -1
[ 0.504427] alloc kstat_irqs on node -1
[ 0.504435] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.504445] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.504585] alloc irq_desc for 28 on node -1
[ 0.504587] alloc kstat_irqs on node -1
[ 0.504595] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.504605] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.504749] alloc irq_desc for 29 on node -1
[ 0.504751] alloc kstat_irqs on node -1
[ 0.504759] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
[ 0.504769] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.504910] alloc irq_desc for 30 on node -1
[ 0.504912] alloc kstat_irqs on node -1
[ 0.504920] pcieport 0000:00:1c.5: irq 30 for MSI/MSI-X
[ 0.504929] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.506404] Linux agpgart interface v0.103
[ 0.506461] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.506808] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.506865] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.509790] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.511127] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.511133] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.511135] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.511138] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.511141] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.511213] mice: PS/2 mouse device common for all mice
[ 0.511251] rtc_cmos 00:03: RTC can wake from S4
[ 0.511289] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.511319] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.511331] cpuidle: using governor ladder
[ 0.511333] cpuidle: using governor menu
[ 0.511337] No iBFT detected.
[ 0.511618] TCP cubic registered
[ 0.511721] NET: Registered protocol family 10
[ 0.512387] Mobile IPv6
[ 0.512389] NET: Registered protocol family 17
[ 0.512462] PM: Resume from disk failed.
[ 0.512470] registered taskstats version 1
[ 0.513086] rtc_cmos 00:03: setting system clock to 2012-04-14 14:53:48 UTC (1334415228)
[ 0.513127] Initalizing network drop monitor service
[ 0.513150] Freeing unused kernel memory: 592k freed
[ 0.513314] Write protecting the kernel read-only data: 4244k
[ 0.526259] udev[56]: starting version 164
[ 0.550806] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.635811] usbcore: registered new interface driver usbfs
[ 0.635836] usbcore: registered new interface driver hub
[ 0.639930] usbcore: registered new device driver usb
[ 0.648360] SCSI subsystem initialized
[ 0.649828] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 0.649830] ricoh-mmc: Copyright(c) Philip Langdale
[ 0.649855] ricoh-mmc: Ricoh MMC controller found at 0000:09:01.2 [1180:0843] (rev 12)
[ 0.649871] ricoh-mmc: Controller is now disabled.
[ 0.653011] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.653040] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.653071] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.653074] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.653101] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.653142] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.654986] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.655005] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.655052] r8169 0000:08:00.0: setting latency timer to 64
[ 0.655120] alloc irq_desc for 31 on node -1
[ 0.655122] alloc kstat_irqs on node -1
[ 0.655140] r8169 0000:08:00.0: irq 31 for MSI/MSI-X
[ 0.655664] r8169 0000:08:00.0: eth0: RTL8168c/8111c at 0xffffc9000066c000, 00:22:15:71:5e:c0, XID 1c4000c0 IRQ 31
[ 0.657030] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.657057] alloc irq_desc for 20 on node -1
[ 0.657059] alloc kstat_irqs on node -1
[ 0.657064] firewire_ohci 0000:09:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.657123] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfddffc00
[ 0.664594] sdhci: Secure Digital Host Controller Interface driver
[ 0.664596] sdhci: Copyright(c) Pierre Ossman
[ 0.671939] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.671972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.671975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.671977] usb usb1: Product: EHCI Host Controller
[ 0.671979] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.671981] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.672055] usb usb1: configuration #1 chosen from 1 choice
[ 0.672085] hub 1-0:1.0: USB hub found
[ 0.672094] hub 1-0:1.0: 6 ports detected
[ 0.672162] alloc irq_desc for 23 on node -1
[ 0.672164] alloc kstat_irqs on node -1
[ 0.672170] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.672194] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.672198] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.672207] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.672243] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.676135] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.676156] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfddff800
[ 0.677844] libata version 3.00 loaded.
[ 0.691898] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.691927] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.691929] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.691932] usb usb2: Product: EHCI Host Controller
[ 0.691933] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.691935] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.691992] usb usb2: configuration #1 chosen from 1 choice
[ 0.692023] hub 2-0:1.0: USB hub found
[ 0.692029] hub 2-0:1.0: 6 ports detected
[ 0.692083] ahci 0000:00:1f.2: version 3.0
[ 0.692097] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.692236] alloc irq_desc for 32 on node -1
[ 0.692238] alloc kstat_irqs on node -1
[ 0.692250] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.692296] ahci: SSS flag set, parallel bus scan disabled
[ 0.692332] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.692336] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs
[ 0.692341] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.693463] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.715980] scsi0 : ahci
[ 0.716055] scsi1 : ahci
[ 0.716113] scsi2 : ahci
[ 0.716176] scsi3 : ahci
[ 0.716234] scsi4 : ahci
[ 0.716299] scsi5 : ahci
[ 0.716694] ata1: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff100 irq 32
[ 0.716698] ata2: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff180 irq 32
[ 0.716700] ata3: DUMMY
[ 0.716701] ata4: DUMMY
[ 0.716704] ata5: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff300 irq 32
[ 0.716707] ata6: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff380 irq 32
[ 0.716747] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.716755] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.716758] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.716768] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.716803] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[ 0.716838] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.716840] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.716842] usb usb3: Product: UHCI Host Controller
[ 0.716844] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.716846] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.716914] usb usb3: configuration #1 chosen from 1 choice
[ 0.716943] hub 3-0:1.0: USB hub found
[ 0.716950] hub 3-0:1.0: 2 ports detected
[ 0.716995] alloc irq_desc for 21 on node -1
[ 0.716997] alloc kstat_irqs on node -1
[ 0.717002] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.717008] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.717011] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.717018] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.717050] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.717083] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.717086] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.717088] usb usb4: Product: UHCI Host Controller
[ 0.717089] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.717091] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.717145] usb usb4: configuration #1 chosen from 1 choice
[ 0.717171] hub 4-0:1.0: USB hub found
[ 0.717177] hub 4-0:1.0: 2 ports detected
[ 0.717222] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.717228] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.717231] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.717238] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.717269] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[ 0.717301] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.717303] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.717305] usb usb5: Product: UHCI Host Controller
[ 0.717307] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.717309] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.717360] usb usb5: configuration #1 chosen from 1 choice
[ 0.717386] hub 5-0:1.0: USB hub found
[ 0.717392] hub 5-0:1.0: 2 ports detected
[ 0.717436] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.717442] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.717445] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.717456] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.717480] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.717510] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.717512] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.717514] usb usb6: Product: UHCI Host Controller
[ 0.717516] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.717518] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.717569] usb usb6: configuration #1 chosen from 1 choice
[ 0.717594] hub 6-0:1.0: USB hub found
[ 0.717601] hub 6-0:1.0: 2 ports detected
[ 0.717646] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.717652] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.717656] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.717662] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.717687] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.717717] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.717719] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.717721] usb usb7: Product: UHCI Host Controller
[ 0.717723] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.717725] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.717776] usb usb7: configuration #1 chosen from 1 choice
[ 0.717802] hub 7-0:1.0: USB hub found
[ 0.717808] hub 7-0:1.0: 2 ports detected
[ 0.717853] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.717859] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.717862] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.717871] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.717896] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[ 0.717927] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.717929] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.717931] usb usb8: Product: UHCI Host Controller
[ 0.717933] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.717934] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.717984] usb usb8: configuration #1 chosen from 1 choice
[ 0.718012] hub 8-0:1.0: USB hub found
[ 0.718018] hub 8-0:1.0: 2 ports detected
[ 0.726580] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
[ 0.726588] ACPI: Expecting a [Reference] package element, found type C
[ 0.726642] ACPI: Invalid passive threshold
[ 0.727637] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.727644] ACPI: Thermal Zone [THRM] (30 C)
[ 0.736117] firewire_ohci: Added fw-ohci device 0000:09:01.0, OHCI version 1.0
[ 0.736170] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 0.736185] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.737214] sdhci-pci 0000:09:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.738241] Registered led device: mmc0::
[ 0.739286] mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
[ 0.983936] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.036021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.037266] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.037354] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.037358] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.037978] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[ 1.037980] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.039300] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.039368] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.039371] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.040004] ata1.00: configured for UDMA/133
[ 1.040104] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
[ 1.116908] usb 1-3: New USB device found, idVendor=1164, idProduct=2edc
[ 1.116911] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.116913] usb 1-3: Product: STK7700D
[ 1.116915] usb 1-3: Manufacturer: YUANRD
[ 1.116916] usb 1-3: SerialNumber: 0000000001
[ 1.116977] usb 1-3: configuration #1 chosen from 1 choice
[ 1.237060] firewire_core: created device fw0: GUID 001e8c00016cb452, S400
[ 1.396009] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.633825] usb 2-5: New USB device found, idVendor=04f2, idProduct=b029
[ 1.633828] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.633830] usb 2-5: Product: USB2.0 1.3M UVC WebCam
[ 1.633831] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.633833] usb 2-5: SerialNumber: SN0001
[ 1.633894] usb 2-5: configuration #1 chosen from 1 choice
[ 1.764025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.766392] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.766395] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.768151] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.B2, max UDMA/100
[ 1.770763] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.770766] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.772544] ata2.00: configured for UDMA/100
[ 1.774344] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.B2 PQ: 0 ANSI: 5
[ 1.876007] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.051307] usb 5-1: New USB device found, idVendor=0b05, idProduct=1751
[ 2.051310] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.051312] usb 5-1: Product: BT-253
[ 2.051314] usb 5-1: Manufacturer: Broadcom Corp
[ 2.051315] usb 5-1: SerialNumber: 0015AFFD9856
[ 2.051371] usb 5-1: configuration #1 chosen from 1 choice
[ 2.292007] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 2.474723] usb 7-1: New USB device found, idVendor=045e, idProduct=0040
[ 2.474726] usb 7-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.474728] usb 7-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.474730] usb 7-1: Manufacturer: Microsoft
[ 2.474795] usb 7-1: configuration #1 chosen from 1 choice
[ 2.496020] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.497214] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.497304] ata5.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.497308] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.497923] ata5.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[ 2.497926] ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.499229] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.499297] ata5.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.499300] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.499949] ata5.00: configured for UDMA/133
[ 2.500046] scsi 4:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
[ 2.820345] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.831597] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.831650] sd 0:0:0:0: [sda] Write Protect is off
[ 2.831652] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.831674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.831801] sda:
[ 2.832087] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.832137] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.832139] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.832161] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.832275] sdb: sda1 sda2
[ 2.842525] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.849279] sdb1 sdb2 < sdb5 sdb6 >
[ 2.890718] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.893418] usbcore: registered new interface driver hiddev
[ 2.898345] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.898348] Uniform CD-ROM driver Revision: 3.20
[ 2.898429] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.902436] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.902483] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.902513] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.907984] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input2
[ 2.908074] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1/input0
[ 2.908099] usbcore: registered new interface driver usbhid
[ 2.908101] usbhid: v2.6:USB HID core driver
[ 3.290689] PM: Starting manual resume from disk
[ 3.290693] PM: Resume from partition 8:22
[ 3.290694] PM: Checking hibernation image.
[ 3.307007] PM: Error -22 checking image file
[ 3.307009] PM: Resume from disk failed.
[ 3.354033] kjournald starting. Commit interval 5 seconds
[ 3.354046] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.065640] udev[448]: starting version 164
[ 5.489025] ACPI: AC Adapter [AC0] (on-line)
[ 5.517742] asus_laptop: Asus Laptop Support version 0.42
[ 5.522872] asus_laptop: BSTS called, 0xe66b returned
[ 5.522919] asus_laptop: H17HV model detected
[ 5.524687] input: Asus Laptop extra buttons as /devices/virtual/input/input3
[ 5.525146] Registered led device: asus::touchpad
[ 5.525537] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 5.530617] ACPI: Battery Slot [BAT0] (battery present)
[ 5.656938] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 5.657255] ACPI: Sleep Button [SLPB]
[ 5.657308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 5.662612] ACPI: Lid Switch [LID]
[ 5.662671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.662676] ACPI: Power Button [PWRF]
[ 6.428609] ACPI: SSDT 00000000bffb67c0 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 6.429198] ACPI: SSDT 00000000bffb6aa0 00712 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 6.434042] Monitor-Mwait will be used to enter C-1 state
[ 6.439354] Monitor-Mwait will be used to enter C-2 state
[ 6.439363] Marking TSC unstable due to TSC halts in idle
[ 6.439449] processor LNXCPU:00: registered as cooling_device0
[ 6.439909] ACPI: SSDT 00000000bffb66f0 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 6.440341] ACPI: SSDT 00000000bffb6a10 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 6.442053] Switching to clocksource hpet
[ 6.444135] processor LNXCPU:01: registered as cooling_device1
[ 6.461362] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.675709] [drm] Initialized drm 1.1.0 20060810
[ 6.764621] Bluetooth: Core ver 2.15
[ 6.764668] NET: Registered protocol family 31
[ 6.764669] Bluetooth: HCI device and connection manager initialized
[ 6.764672] Bluetooth: HCI socket layer initialized
[ 7.183590] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.184232] usbcore: registered new interface driver btusb
[ 7.196215] cfg80211: Using static regulatory domain info
[ 7.196218] cfg80211: Regulatory domain: US
[ 7.196219] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.196222] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.196225] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.196227] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.196230] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.196232] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.196235] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.196436] cfg80211: Calling CRDA for country: US
[ 7.290175] acpi device:22: registered as cooling_device2
[ 7.290315] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input8
[ 7.290363] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 7.306716] Linux video capture interface: v2.00
[ 7.467455] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam (04f2:b029)
[ 7.470927] input: USB2.0 1.3M UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9
[ 7.470976] usbcore: registered new interface driver uvcvideo
[ 7.470979] USB Video Class driver (v0.1.0)
[ 7.703270] [drm] radeon kernel modesetting enabled.
[ 7.703327] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.703332] radeon 0000:01:00.0: setting latency timer to 64
[ 7.705828] [drm] radeon: Initializing kernel modesetting.
[ 7.706166] [drm] register mmio base: 0xFDEF0000
[ 7.706169] [drm] register mmio size: 65536
[ 7.706371] ATOM BIOS: PackardBell
[ 7.706396] [drm] Clocks initialized !
[ 7.706453] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.706455] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.706457] [drm] RAM width 128bits DDR
[ 7.706549] [TTM] Zone kernel: Available graphics memory: 2031540 kiB.
[ 7.706566] [drm] radeon: 256M of VRAM memory ready
[ 7.706567] [drm] radeon: 512M of GTT memory ready.
[ 7.706609] alloc irq_desc for 33 on node -1
[ 7.706611] alloc kstat_irqs on node -1
[ 7.706622] radeon 0000:01:00.0: irq 33 for MSI/MSI-X
[ 7.706627] radeon 0000:01:00.0: radeon: using MSI.
[ 7.706654] [drm] radeon: irq initialized.
[ 7.706656] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.707480] [drm] Loading RV635 Microcode
[ 7.707483] platform radeon_cp.0: firmware: requesting radeon/RV635_pfp.bin
[ 7.884211] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 7.884214] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 7.884288] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.884296] iwlagn 0000:03:00.0: setting latency timer to 64
[ 7.884335] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 7.909242] r600_cp: Failed to load firmware "radeon/RV635_pfp.bin"
[ 7.909345] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 7.909470] radeon 0000:01:00.0: disabling GPU acceleration
[ 7.909641] radeon 0000:01:00.0: ffff88013c6dee00 unpin not necessary
[ 7.909644] radeon 0000:01:00.0: ffff88013c6dee00 unpin not necessary
[ 7.909658] [drm] Enabling audio support
[ 7.909820] [drm] Radeon Display Connectors
[ 7.909822] [drm] Connector 0:
[ 7.909823] [drm] LVDS
[ 7.909825] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[ 7.909827] [drm] Encoders:
[ 7.909829] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 7.909830] [drm] Connector 1:
[ 7.909831] [drm] HDMI-A
[ 7.909833] [drm] HPD1
[ 7.909835] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.909836] [drm] Encoders:
[ 7.909837] [drm] DFP1: INTERNAL_UNIPHY
[ 7.909839] [drm] Connector 2:
[ 7.909840] [drm] DVI-I
[ 7.909841] [drm] HPD2
[ 7.909843] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.909844] [drm] Encoders:
[ 7.909846] [drm] DFP2: INTERNAL_UNIPHY
[ 7.909847] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.924142] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b2, caps: 0xb04711/0xa00000/0x0
[ 7.924275] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 7.924352] iwlagn 0000:03:00.0: irq 33 for MSI/MSI-X
[ 7.961311] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 8.035562] [drm] fb mappable at 0xD0040000
[ 8.035564] [drm] vram apper at 0xD0000000
[ 8.035565] [drm] size 5299200
[ 8.035566] [drm] fb depth is 24
[ 8.035568] [drm] pitch is 5888
[ 8.073121] dib0700: loaded with support for 13 different device-types
[ 8.073292] dvb-usb: found a 'Yuan PD378S' in cold state, will try to load a firmware
[ 8.073296] usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fw
[ 8.074970] dvb-usb: did not find the firmware file. (dvb-usb-dib0700-1.20.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[ 8.075003] usbcore: registered new interface driver dvb_usb_dib0700
[ 8.089511] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 8.356093] alloc irq_desc for 22 on node -1
[ 8.356095] alloc kstat_irqs on node -1
[ 8.356102] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.356163] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.464785] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 8.466086] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 8.973157] Console: switching to colour frame buffer device 180x56
[ 8.976621] fb0: radeondrmfb frame buffer device
[ 8.976622] registered panic notifier
[ 8.976638] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 8.976701] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.976764] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 9.560748] Adding 3997688k swap on /dev/sdb6. Priority:-1 extents:1 across:3997688k
[ 9.740177] EXT3 FS on sdb5, internal journal
[ 9.882389] loop: module loaded
[ 10.798331] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 10.833515] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[ 10.978186] Registered led device: iwl-phy0::radio
[ 10.978203] Registered led device: iwl-phy0::assoc
[ 10.978225] Registered led device: iwl-phy0::RX
[ 10.978240] Registered led device: iwl-phy0::TX
[ 10.989903] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 278.511830] fuse init (API version 7.13)
[ 280.150479] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 280.954895] r8169 0000:08:00.0: eth0: link down
[ 280.954902] r8169 0000:08:00.0: eth0: link down
[ 280.955403] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 282.600306] r8169 0000:08:00.0: eth0: link up
[ 282.600786] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 284.691768] Bluetooth: L2CAP ver 2.14
[ 284.691771] Bluetooth: L2CAP socket layer initialized
[ 284.725936] Bluetooth: RFCOMM TTY layer initialized
[ 284.725940] Bluetooth: RFCOMM socket layer initialized
[ 284.725941] Bluetooth: RFCOMM ver 1.11
[ 284.802411] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 284.802414] Bluetooth: BNEP filters: protocol multicast
[ 284.840013] Bridge firewalling registered
[ 284.870237] Bluetooth: SCO (Voice Link) ver 0.6
[ 284.870239] Bluetooth: SCO socket layer initialized
[ 285.378580] lp: driver loaded but no devices found
[ 285.386757] ppdev: user-space parallel port driver
[ 293.017021] eth0: no IPv6 routers present
