salut,
j’ai un portable lenovo idépad y710 avec un système de double disque dur dont un démontable à chaud.
jai vista installer sur “sda” et lenny sur “sdb”.
le souci c’est que j’ai un accès constant sur sdb et cela m’inquiète car le disque chauffe .
je ne sais pas trop comment ciblé le problème,
j’ai un doute sur la partoche de swap ou bien sur un demon système mais comment savoir lequel…
si quelqu’un peut m’aider.
+++
Salut,
Tu peux tout de suite éliminer la partition de swap car elle ne sert qu’exceptionellement.
Cherches sur ce forum le sujet à déja été traité, il s’agit d’un parkage de tête intempestif.
[quote=“ggoodluck47”]Salut,
Tu peux tout de suite éliminer la partition de swap car elle ne sert qu’exceptionellement.
Cherches sur ce forum le sujet à déja été traité, il s’agit d’un parkage de tête intempestif.[/quote]
ok je vais voir ça
merci
+++
Regarde avec la commande “top” si tu repère pas un processus bizzar.
Sinon liste tes partitions montées
et essaye de démonter les partitions une à une (sauf / bien sur)
ggoodluck: vu la description du problème, je doute que ce soit le problème du parcage des têtes.
pour désactiver le swap:
Avec la commande pidstat -d, tu peux afficher des statistiques sur l’utilisation des entrées/sorties par processus (paquet sysstat).
j’ai regarder du coté de smartmontools et du parquage de tête, résultat
15 parquages sur sdb (lenny) en 2H
2 parquages sur sda en 2h
je crois que cela ne vient pas de ça, j’ai oublié de préciser que je suis uniquement sur secteur donc laptop-mode est inactif.
retour de pidstat -d
Linux 2.6.25-2-686 (chris-laptop) 09.08.2008 i686
22:17:30 PID kB_rd/s kB_wr/s kB_ccwr/s Command
22:17:30 1 1,08 0,01 0,00 init
22:17:30 185 0,00 8,74 0,00 pdflush
22:17:30 1048 0,00 2,07 0,00 kjournald
22:17:30 2213 0,00 0,49 0,00 kjournald
22:17:30 2319 0,00 0,00 0,00 avahi-autoipd
22:17:30 2327 0,00 0,00 0,00 dhclient3
22:17:30 2400 0,02 0,01 0,00 portmap
22:17:30 2411 0,00 0,00 0,00 rpc.statd
22:17:30 2735 0,05 0,00 0,00 rsyslogd
22:17:30 2806 0,21 0,00 0,00 acpid
22:17:30 2871 0,62 0,01 0,00 cupsd
22:17:30 3146 0,00 0,00 0,00 exim4
22:17:30 3228 0,00 0,00 0,00 inetd
22:17:30 3253 0,01 0,00 0,00 avahi-daemon
22:17:30 3263 0,01 0,00 0,00 dhcdbd
22:17:30 3277 1,07 0,00 0,00 hald
22:17:30 3278 0,02 0,00 0,00 hald-runner
22:17:30 3301 0,01 0,00 0,00 hald-addon-inpu
22:17:30 3306 0,02 0,00 0,00 hald-addon-cpuf
22:17:30 3307 0,01 0,00 0,00 hald-addon-acpi
22:17:30 3328 0,06 0,00 0,00 hcid
22:17:30 3353 0,00 0,00 0,00 NetworkManager
22:17:30 3360 0,00 0,00 0,00 NetworkManagerD
22:17:30 3401 0,00 0,00 0,00 gdm
22:17:30 3407 0,52 0,02 0,00 gdm
22:17:30 3412 3,05 0,03 0,01 Xorg
22:17:30 3413 0,00 0,00 0,00 system-tools-ba
22:17:30 3429 0,00 0,00 0,00 atd
22:17:30 3451 0,01 0,00 0,00 cron
22:17:30 3495 0,01 0,00 0,00 getty
22:17:30 3554 0,00 0,00 0,00 dhclient3
22:17:30 3583 3,66 0,29 0,14 gconfd-2
22:17:30 3588 0,11 0,00 0,00 gnome-keyring-d
22:17:30 3590 1,87 0,00 0,00 keytouchd-launc
22:17:30 3647 1,80 0,00 0,00 seahorse-agent
22:17:30 3649 0,16 0,00 0,00 x-session-manag
22:17:30 3652 1,72 0,00 0,00 gnome-settings-
22:17:30 3668 0,57 0,00 0,00 metacity
22:17:30 3669 6,80 0,08 0,08 gnome-panel
22:17:30 3671 4,06 0,00 0,00 nautilus
22:17:30 3679 1,31 0,00 0,00 bonobo-activati
22:17:30 3685 0,08 0,00 0,00 gnome-vfs-daemo
22:17:30 3686 0,12 0,00 0,00 bluetooth-apple
22:17:30 3691 0,12 0,00 0,00 update-notifier
22:17:30 3699 1,99 0,00 0,00 system-config-p
22:17:30 3701 0,02 0,00 0,00 kerneloops-appl
22:17:30 3705 0,83 0,00 0,00 nm-applet
22:17:30 3711 0,28 0,00 0,00 gnome-power-man
22:17:30 3742 0,02 0,00 0,00 mapping-daemon
22:17:30 3753 0,19 0,00 0,00 mixer_applet2
22:17:30 3764 16,12 1,17 0,51 firefox-bin
22:17:30 3922 2,84 0,00 0,00 gnome-terminal
22:17:30 3925 0,01 0,00 0,00 gnome-pty-helpe
22:17:30 3926 0,28 0,00 0,00 bash
22:17:30 3944 0,05 0,00 0,00 su
22:17:30 3949 0,01 0,00 0,00 bash
22:17:30 3974 0,33 0,00 0,00 gcalctool
22:17:30 4521 0,04 0,03 0,02 gconfd-2
comment savoir quels sont les accès disques??
ce qui est bizarre c’est que j’ai la led allumé mais aucun bruit de disque, alors que quand j’utilise le monitoring de gnome à intervalles réguliers j’ai le graphe qui s’élève.
+++
intéressant cet utilitaire il y a pas un moyen de le voire tourner genre htop ou top ?
Ton disque est mort perharps !?
j’ai du nouveau…
il s’avère que c’est mon combo dvd qui merde, il n’est pas reconnu par le noyau on dirait .
Fstab est renseigné comme il faut, j’ai fait une tentative avec le script MAKEDEV mais cela ne fonctionne pas, il creer un dev dans le dossier .static/dev/ et non dans la racine /dev .
Le point positif c’est que la led fonctionne normalement à partir du moment ou j’insères un cd …
je poste le résultat d’un dmesg
[ 0.366573] IO window: disabled.
[ 0.366579] MEM window: 0xf4200000-0xf42fffff
[ 0.366584] PREFETCH window: disabled.
[ 0.366591] PCI: Bridge: 0000:00:1c.2
[ 0.366593] IO window: disabled.
[ 0.366598] MEM window: disabled.
[ 0.366603] PREFETCH window: disabled.
[ 0.366610] PCI: Bridge: 0000:00:1c.3
[ 0.366612] IO window: disabled.
[ 0.366618] MEM window: disabled.
[ 0.366622] PREFETCH window: disabled.
[ 0.366630] PCI: Bridge: 0000:00:1c.4
[ 0.366633] IO window: 3000-3fff
[ 0.366639] MEM window: 0xf2000000-0xf3ffffff
[ 0.366645] PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
[ 0.366653] PCI: Bridge: 0000:00:1c.5
[ 0.366655] IO window: disabled.
[ 0.366661] MEM window: disabled.
[ 0.366665] PREFETCH window: disabled.
[ 0.366674] PCI: Bridge: 0000:00:1e.0
[ 0.366675] IO window: disabled.
[ 0.366681] MEM window: 0xf4300000-0xf43fffff
[ 0.366686] PREFETCH window: disabled.
[ 0.366705] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.366710] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.366733] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.366739] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.366763] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.366770] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.366793] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.366799] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.366825] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.366831] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.366854] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.366860] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.366882] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.366888] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.366903] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.366929] NET: Registered protocol family 2
[ 0.380088] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.380332] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.380739] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.380950] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.380953] TCP reno registered
[ 0.388200] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504045] Switched to high resolution mode on CPU 0
[ 0.682229] it is
[ 1.000789] Freeing initrd memory: 6548k freed
[ 1.000933] Simple Boot Flag at 0x35 set to 0x1
[ 0.756821] audit: initializing netlink socket (disabled)
[ 0.756839] type=2000 audit(1218487187.000:1): initialized
[ 0.757068] highmem bounce pool size: 64 pages
[ 0.757072] Total HugeTLB memory allocated, 0
[ 0.757163] VFS: Disk quotas dquot_6.5.1
[ 0.757197] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.757295] io scheduler noop registered
[ 0.757297] io scheduler anticipatory registered
[ 0.757299] io scheduler deadline registered
[ 0.757314] io scheduler cfq registered (default)
[ 2.544171] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.544171] pci 0000:01:00.0: Boot video device
[ 2.544171] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 2.544171] assign_interrupt_mode Found MSI capability
[ 2.544171] Allocate Port Service[0000:00:01.0:pcie00]
[ 2.544171] Allocate Port Service[0000:00:01.0:pcie02]
[ 2.544171] Allocate Port Service[0000:00:01.0:pcie03]
[ 2.544171] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 2.544171] assign_interrupt_mode Found MSI capability
[ 2.544171] Allocate Port Service[0000:00:1c.0:pcie00]
[ 2.544171] Allocate Port Service[0000:00:1c.0:pcie02]
[ 2.544171] Allocate Port Service[0000:00:1c.0:pcie03]
[ 2.544171] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 2.544171] assign_interrupt_mode Found MSI capability
[ 2.544171] Allocate Port Service[0000:00:1c.1:pcie00]
[ 2.544171] Allocate Port Service[0000:00:1c.1:pcie02]
[ 2.544171] Allocate Port Service[0000:00:1c.1:pcie03]
[ 2.544171] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 2.544188] assign_interrupt_mode Found MSI capability
[ 2.544239] Allocate Port Service[0000:00:1c.2:pcie00]
[ 2.544275] Allocate Port Service[0000:00:1c.2:pcie02]
[ 2.544314] Allocate Port Service[0000:00:1c.2:pcie03]
[ 2.544428] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 2.544481] assign_interrupt_mode Found MSI capability
[ 2.544531] Allocate Port Service[0000:00:1c.3:pcie00]
[ 2.544571] Allocate Port Service[0000:00:1c.3:pcie02]
[ 2.544609] Allocate Port Service[0000:00:1c.3:pcie03]
[ 2.544722] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 2.544775] assign_interrupt_mode Found MSI capability
[ 2.544826] Allocate Port Service[0000:00:1c.4:pcie00]
[ 2.544864] Allocate Port Service[0000:00:1c.4:pcie02]
[ 2.544901] Allocate Port Service[0000:00:1c.4:pcie03]
[ 2.545015] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 2.545067] assign_interrupt_mode Found MSI capability
[ 2.545118] Allocate Port Service[0000:00:1c.5:pcie00]
[ 2.545158] Allocate Port Service[0000:00:1c.5:pcie02]
[ 2.545196] Allocate Port Service[0000:00:1c.5:pcie03]
[ 2.545547] isapnp: Scanning for PnP cards...
[ 4.870927] isapnp: No Plug & Play device found
[ 4.873499] hpet_resources: 0xfed00000 is busy
[ 4.873546] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 4.874770] brd: module loaded
[ 4.874857] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.437176] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.444227] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.444232] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.444236] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.444238] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.444241] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.444391] mice: PS/2 mouse device common for all mice
[ 3.444463] cpuidle: using governor ladder
[ 3.444465] cpuidle: using governor menu
[ 3.446509] TCP cubic registered
[ 3.446519] NET: Registered protocol family 1
[ 3.446530] NET: Registered protocol family 17
[ 3.446538] Using IPI No-Shortcut mode
[ 3.446653] registered taskstats version 1
[ 3.446907] Freeing unused kernel memory: 252k freed
[ 5.002908] ACPI: SSDT BFED7403, 0227 (r1 PmRef Cpu0Ist 3000 INTL 20061109)
[ 5.003324] ACPI: SSDT BFED6D94, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20061109)
[ 3.552898] Monitor-Mwait will be used to enter C-1 state
[ 3.552902] Monitor-Mwait will be used to enter C-2 state
[ 3.552905] Monitor-Mwait will be used to enter C-3 state
[ 3.553078] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.553125] ACPI: ACPI0007:00 is registered as cooling_device0
[ 3.553487] ACPI: SSDT BFED762A, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109)
[ 3.553756] ACPI: SSDT BFED737E, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109)
[ 3.554528] Marking TSC unstable due to: TSC halts in idle.
[ 5.005822] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 5.005877] ACPI: ACPI0007:01 is registered as cooling_device1
[ 3.672276] input: AT Translated Set 2 keyboard as /class/input/input0
[ 3.956275] Clocksource tsc unstable (delta = -361411345 ns)
[ 3.986111] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 3.991746] ACPI: Thermal Zone [TZS0] (60 C)
[ 3.997577] ACPI: LNXTHERM:02 is registered as thermal_zone1
[ 4.000574] ACPI: Thermal Zone [TZS1] (64 C)
[ 4.277606] usbcore: registered new interface driver usbfs
[ 4.277637] usbcore: registered new interface driver hub
[ 4.286612] usbcore: registered new device driver usb
[ 4.289142] USB Universal Host Controller Interface driver v3.0
[ 4.289179] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.289190] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 4.289194] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.289315] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.289351] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 4.289484] usb usb1: configuration #1 chosen from 1 choice
[ 4.289509] hub 1-0:1.0: USB hub found
[ 4.289516] hub 1-0:1.0: 2 ports detected
[ 4.352501] Uniform Multi-Platform E-IDE driver
[ 4.352506] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.396558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.396562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.396565] usb usb1: Product: UHCI Host Controller
[ 4.396567] usb usb1: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 4.396570] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.396609] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 4.396619] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 4.396624] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.396650] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 4.396686] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 4.396799] usb usb2: configuration #1 chosen from 1 choice
[ 4.396825] hub 2-0:1.0: USB hub found
[ 4.396832] hub 2-0:1.0: 2 ports detected
[ 4.409709] sdhci: Secure Digital Host Controller Interface driver
[ 4.409712] sdhci: Copyright(c) Pierre Ossman
[ 4.413492] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 4.413495] ricoh-mmc: Copyright(c) Philip Langdale
[ 4.496643] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.496650] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.496655] usb usb2: Product: UHCI Host Controller
[ 4.496658] usb usb2: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 4.496662] usb usb2: SerialNumber: 0000:00:1a.1
[ 4.496716] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 4.496730] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4.496737] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.496772] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 4.496805] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 4.496919] usb usb3: configuration #1 chosen from 1 choice
[ 4.496944] hub 3-0:1.0: USB hub found
[ 4.496950] hub 3-0:1.0: 2 ports detected
[ 4.600083] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.600089] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.600093] usb usb3: Product: UHCI Host Controller
[ 4.600097] usb usb3: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 4.600100] usb usb3: SerialNumber: 0000:00:1d.0
[ 4.600136] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 4.600148] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 4.600154] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.600195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 4.600235] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 4.600342] usb usb4: configuration #1 chosen from 1 choice
[ 4.600366] hub 4-0:1.0: USB hub found
[ 4.600372] hub 4-0:1.0: 2 ports detected
[ 4.631849] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 4.703735] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.703740] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.703744] usb usb4: Product: UHCI Host Controller
[ 4.703748] usb usb4: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 4.703752] usb usb4: SerialNumber: 0000:00:1d.1
[ 4.703788] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 4.703799] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 4.703805] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.703851] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 4.703891] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 4.704000] usb usb5: configuration #1 chosen from 1 choice
[ 4.704023] hub 5-0:1.0: USB hub found
[ 4.704029] hub 5-0:1.0: 2 ports detected
[ 4.793728] usb 1-1: configuration #1 chosen from 1 choice
[ 4.795183] usb 1-1: New USB device found, idVendor=0a5c, idProduct=2101
[ 4.795183] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.795183] usb 1-1: Product: Foxconn Bluetooth 2.0 plus EDR
[ 4.795183] usb 1-1: Manufacturer: Broadcom Corp
[ 4.804000] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.804005] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.804009] usb usb5: Product: UHCI Host Controller
[ 4.804013] usb usb5: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 4.804017] usb usb5: SerialNumber: 0000:00:1d.2
[ 4.804152] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 4.804164] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 4.804168] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.804192] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 4.808139] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.808147] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 4.808152] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4604000
[ 4.823909] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.824044] usb usb6: configuration #1 chosen from 1 choice
[ 4.824071] hub 6-0:1.0: USB hub found
[ 4.824077] hub 6-0:1.0: 4 ports detected
[ 4.928010] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.928014] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.928017] usb usb6: Product: EHCI Host Controller
[ 4.928019] usb usb6: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
[ 4.928021] usb usb6: SerialNumber: 0000:00:1a.7
[ 6.456414] tg3.c:v3.91 (April 18, 2008)
[ 6.456498] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.456516] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 5.031195] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 5.184720] usb 4-1: configuration #1 chosen from 1 choice
[ 5.187221] usb 4-1: New USB device found, idVendor=062a, idProduct=0000
[ 5.187225] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.760239] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:0a:e4:c9:58:32
[ 6.760244] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 6.760247] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 5.230210] ricoh-mmc: Ricoh MMC controller found at 0000:0e:09.2 [1180:0843] (rev 12)
[ 5.230210] ricoh-mmc: Controller is now disabled.
[ 5.230210] ACPI: PCI Interrupt 0000:0e:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 5.306819] firewire_ohci: Added fw-ohci device 0000:0e:09.0, OHCI version 1.10
[ 5.306965] sdhci: SDHCI controller found at 0000:0e:09.1 [1180:0822] (rev 22)
[ 5.306990] ACPI: PCI Interrupt 0000:0e:09.1[B] -> GSI 18 (level, low) -> IRQ 18
[ 5.307010] sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5.307067] mmc0: SDHCI at 0xf4300800 irq 18 DMA
[ 6.842123] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
[ 6.842123] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 6.842123] ICH8M: not 100% native mode: will probe irqs later
[ 6.842123] ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:PIO, hdb:DMA
[ 6.842123] ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:PIO, hdd:PIO
[ 6.842123] Probing IDE interface ide0...
[ 5.422599] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 5.600818] usb 5-1: not running at top speed; connect to a high speed hub
[ 5.787522] usb 5-1: configuration #1 chosen from 1 choice
[ 5.808723] firewire_core: created device fw0: GUID 07e40a00c1042051, S400
[ 5.828722] usb 5-1: New USB device found, idVendor=5986, idProduct=0200
[ 5.828722] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.828722] usb 5-1: Product: Lenovo Easy Camera
[ 7.458803] Probing IDE interface ide1...
[ 6.064045] hub 6-0:1.0: unable to enumerate USB device on port 1
[ 6.064164] usb 1-1: USB disconnect, address 2
[ 6.065144] usbcore: registered new interface driver hiddev
[ 6.302983] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 6.471444] usb 1-1: configuration #1 chosen from 1 choice
[ 6.474594] usb 1-1: New USB device found, idVendor=0a5c, idProduct=2101
[ 6.474597] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.474600] usb 1-1: Product: Foxconn Bluetooth 2.0 plus EDR
[ 6.474602] usb 1-1: Manufacturer: Broadcom Corp
[ 6.486940] input: HID 062a:0000 as /class/input/input1
[ 6.509374] input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-1
[ 6.509400] usbcore: registered new interface driver usbhid
[ 6.509404] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 6.535348] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 6.535361] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.535366] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.535399] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 6.540179] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.540187] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 6.540195] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4604400
[ 8.083869] No dock devices found.
[ 8.091457] SCSI subsystem initialized
[ 6.553330] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.553467] usb usb7: configuration #1 chosen from 1 choice
[ 6.553493] hub 7-0:1.0: USB hub found
[ 6.553500] hub 7-0:1.0: 6 ports detected
[ 8.100336] libata version 3.00 loaded.
[ 6.656535] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.656541] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.656546] usb usb7: Product: EHCI Host Controller
[ 6.656549] usb usb7: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
[ 6.656553] usb usb7: SerialNumber: 0000:00:1d.7
[ 8.199902] ata_piix 0000:00:1f.2: version 2.12
[ 8.199931] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
[ 8.199937] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 8.355530] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.355729] scsi0 : ata_piix
[ 8.355921] scsi1 : ata_piix
[ 8.360246] ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x18cc bmdma 0x18e0 irq 18
[ 8.360255] ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x18c8 bmdma 0x18e8 irq 18
[ 6.839513] hub 7-0:1.0: unable to enumerate USB device on port 3
[ 7.078590] usb 7-5: new high speed USB device using ehci_hcd and address 3
[ 7.281703] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.290099] ata1.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133
[ 7.290105] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 7.305997] ata1.00: configured for UDMA/133
[ 7.513599] usb 7-5: configuration #1 chosen from 1 choice
[ 7.553459] usb 7-5: New USB device found, idVendor=5986, idProduct=0200
[ 7.553470] usb 7-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.553473] usb 7-5: Product: Lenovo Easy Camera
[ 7.553495] usb 4-1: USB disconnect, address 2
[ 7.768624] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[ 7.777074] ata2.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133
[ 7.777080] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 7.792958] ata2.00: configured for UDMA/133
[ 9.338585] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
[ 9.338650] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
[ 7.804390] usb 4-1: new low speed USB device using uhci_hcd and address 3
[ 7.808946] Driver 'sd' needs updating - please use bus_type methods
[ 7.809034] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 7.809051] sd 0:0:0:0: [sda] Write Protect is off
[ 7.809053] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.809080] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.809140] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 7.809155] sd 0:0:0:0: [sda] Write Protect is off
[ 7.809158] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.809183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.809188] sda:<6>usb 4-1: configuration #1 chosen from 1 choice
[ 7.972688] input: HID 062a:0000 as /class/input/input2
[ 7.991915] input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-1
[ 7.991997] usb 4-1: New USB device found, idVendor=062a, idProduct=0000
[ 7.992000] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.992022] usb 5-1: USB disconnect, address 2
[ 8.179620] sda1 sda2 < sda5 > sda3
[ 8.194164] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.194239] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 8.194260] sd 1:0:0:0: [sdb] Write Protect is off
[ 8.194262] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.194298] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.194360] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 8.194379] sd 1:0:0:0: [sdb] Write Protect is off
[ 8.194382] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.194416] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.194419] sdb: sdb1 sdb2 sdb3
[ 8.576812] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 9.093210] PM: Starting manual resume from disk
[ 10.714341] kjournald starting. Commit interval 5 seconds
[ 10.714341] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.537333] Linux agpgart interface v0.103
[ 11.690724] input: Power Button (FF) as /class/input/input3
[ 11.750697] ACPI: Power Button (FF) [PWRF]
[ 11.750764] input: Lid Switch as /class/input/input4
[ 11.785489] ACPI: Lid Switch [LID0]
[ 11.785555] input: Sleep Button (CM) as /class/input/input5
[ 11.846698] ACPI: Sleep Button (CM) [SLPB]
[ 11.846802] ACPI: WMI: Mapper loaded
[ 11.857811] ACPI: device:05 is registered as cooling_device2
[ 11.857979] input: Video Bus as /class/input/input6
[ 11.879098] ACPI: \_SB_.PCI0.SATA.SECD.S_D0: found ejectable bay
[ 11.879104] ACPI: \_SB_.PCI0.SATA.SECD.S_D0: Adding notify handler
[ 11.879132] ACPI: Error installing bay notify handler
[ 11.879215] ACPI: Bay [\_SB_.PCI0.SATA.SECD.S_D0] Added
[ 11.910707] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 11.911396] input: Video Bus as /class/input/input7
[ 11.974697] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.604530] ACPI: Battery Slot [BAT0] (battery absent)
[ 13.606456] ACPI: AC Adapter [ADP1] (on-line)
[ 12.065015] Bluetooth: Core ver 2.11
[ 12.097956] NET: Registered protocol family 31
[ 12.097959] Bluetooth: HCI device and connection manager initialized
[ 12.097963] Bluetooth: HCI socket layer initialized
[ 13.779136] Bluetooth: HCI USB driver ver 2.9
[ 13.780908] usbcore: registered new interface driver hci_usb
[ 14.229650] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
[ 14.229653] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 14.229794] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 14.229810] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 14.229830] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 14.390747] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 14.414549] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 12.803836] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 12.840944] Real Time Clock Driver v1.12ac
[ 14.602889] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 14.603204] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
[ 14.603372] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 14.603397] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.636526] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 14.671727] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.671758] PCI: Setting latency timer of device 0000:01:00.1 to 64
[ 13.495733] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000
[ 15.212859] input: SynPS/2 Synaptics TouchPad as /class/input/input8
[ 13.669132] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 13.669132] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.669132] input: PC Speaker as /class/input/input9
[ 14.313479] Adding 1951888k swap on /dev/sdb2. Priority:-1 extents:1 across:1951888k
[ 14.663177] EXT3 FS on sdb1, internal journal
[ 14.937330] loop: module loaded
[ 17.402002] kjournald starting. Commit interval 5 seconds
[ 15.667065] EXT3 FS on sdb3, internal journal
[ 15.667065] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.584367] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 16.584537] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
[ 94.666909] lp: driver loaded but no devices found
[ 97.071263] ppdev: user-space parallel port driver
[ 95.221482] NET: Registered protocol family 10
[ 95.222084] lo: Disabled Privacy Extensions
[ 95.222632] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 95.223242] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 134.152556] usb 7-4: new high speed USB device using ehci_hcd and address 4
[ 134.284894] usb 7-4: configuration #1 chosen from 1 choice
[ 134.285174] usb 7-4: New USB device found, idVendor=0204, idProduct=6025
[ 134.285185] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 134.285189] usb 7-4: Product: Flash Disk
[ 134.285193] usb 7-4: Manufacturer: CBM
[ 134.285196] usb 7-4: SerialNumber: 111654007851F000
[ 134.758833] Initializing USB Mass Storage driver...
[ 137.397928] scsi2 : SCSI emulation for USB Mass Storage devices
[ 134.760869] usb-storage: device found at 4
[ 137.398265] usbcore: registered new interface driver usb-storage
[ 137.398271] USB Mass Storage support registered.
[ 134.760882] usb-storage: waiting for device to settle before scanning
[ 139.708100] usb-storage: device scan complete
[ 139.708812] scsi 2:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
[ 139.710747] sd 2:0:0:0: [sdc] 1001472 512-byte hardware sectors (513 MB)
[ 142.380578] sd 2:0:0:0: [sdc] Write Protect is off
[ 142.380588] sd 2:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 142.380592] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 142.382713] sd 2:0:0:0: [sdc] 1001472 512-byte hardware sectors (513 MB)
[ 142.383457] sd 2:0:0:0: [sdc] Write Protect is off
[ 142.383465] sd 2:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 142.383469] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 142.383573] sdc: sdc1
[ 142.384938] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 157.580248] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
je ne trouves rien sur le lecteur dvd, comment je peux forcer sa détection?
+++