Nvidia probleme: login ok bureau non (Résolu)

Support Debian
#1

Bonjour,
J’ai bien lorsque je configure dans xorg.conf le driver a nvidia, le logo nvidia, le login, mais j’ai ensuite un résolution de 320x200 !!!
Sans le drivers nvidia j’ai un mode 1600*1200 non recommandé pour mon écran pour le login et le bureau. (2243LNX)
Auriez vous une idée ?

Debian lenny 5.0, noyau 64bits :2.6.26-2-amd64 #1 SMP
J’installe sans problème les drivers nvidia.
soit en apt-get soit par la la méthode module-assistant:

ii nvidia-glx 173.14.09-5 NVIDIA binary Xorg driver ii nvidia-kernel-2.6.26-2-amd64 173.14.09-5+2.6.26-19 NVIDIA binary kernel module for Linux 2.6.26-2-amd64 ii nvidia-kernel-common 20080825+1 NVIDIA binary kernel module common files ii nvidia-kernel-source 173.14.09-5 NVIDIA binary kernel module source ii nvidia-settings 173.14.09-1 Tool of configuring the NVIDIA graphics driver

Données technique de l’écran:

VESA, 1280 X 960 60.000 60.000 108.000 +/+ VESA, 1280 X 1024 79.976 75.025 135.000 +/+ VESA, 1680 X 1050 64.674 59.883 119.000 +/-

(II) VESA(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) VESA(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) VESA(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) VESA(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) VESA(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) VESA(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) VESA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) VESA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) VESA(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) VESA(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz) (II) VESA(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz) (II) VESA(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz) (II) VESA(0): 720x400@70Hz (II) VESA(0): 640x480@60Hz (II) VESA(0): 640x480@67Hz (II) VESA(0): 640x480@72Hz (II) VESA(0): 640x480@75Hz (II) VESA(0): 800x600@56Hz (II) VESA(0): 800x600@60Hz (II) VESA(0): 800x600@72Hz (II) VESA(0): 800x600@75Hz (II) VESA(0): 832x624@75Hz (II) VESA(0): 1024x768@60Hz (II) VESA(0): 1024x768@70Hz (II) VESA(0): 1024x768@75Hz (II) VESA(0): 1280x1024@75Hz (II) VESA(0): 1152x870@75Hz (II) VESA(0): Supported Future Video Modes: (II) VESA(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) VESA(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) VESA(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) VESA(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) VESA(0): Supported additional Video Mode: (II) VESA(0): clock: 119.0 MHz Image Size: 459 x 296 mm (II) VESA(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 (II) VESA(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 (II) VESA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz

Carte graphique:
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200] (rev a2)
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 14336 kB
(II) VESA(0): VESA VBE OEM: NVIDIA
(II) VESA(0): VESA VBE OEM Software Rev: 98.119
(II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation
(II) VESA(0): VESA VBE OEM Product: MCP77 Board - mcp78so
(II) VESA(0): VESA VBE OEM Product Rev: Chip Rev

Xorg:

[code]#Section “ServerLayout”

Identifier “Default Layout”

Screen “Screen0”

InputDevice “Generic Keyboard”

InputDevice “Configured Mouse”

Option “OffTime” “20”

#EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "es"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section “Module”
#Load “dbe”
#Load “extmod”
#Load “type1”
#Load "freetype"
Load "glx"
EndSection

Section "Device"
Identifier “Device0”
#Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "MCP77 Board - mcp78so"
Screen 0
EndSection

Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
VendorName "Samsung"
ModelName "SyncMaster 2243LNX"
HorizSync 30 - 91
VertRefresh 56.000 - 75.000
#Modeline “1680x1050” 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
Modeline “1680x1050” 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes “1680x1050” “1600x1200” “1440x1440” “1280x1024” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
Depth 16
Modes “1680x1050” “1600x1200” “1440x1440” “1280x1024” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
Depth 24
Modes “1680x1050” “1600x1200” “1440x1440” “1280x1024” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
Virtual 1680 1050
EndSubSection
EndSection[/code]

Logs: (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "1680x1050" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Configured Mouse: No Device specified, looking for one... (II) Configured Mouse: Setting Device option to "/dev/input/mice" (--) Configured Mouse: Device: "/dev/input/mice" (==) Configured Mouse: Protocol: "Auto" (**) Option "CorePointer" (**) Configured Mouse: always reports core events (==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 9 (**) Configured Mouse: Sensitivity: 1 (**) Option "CoreKeyboard" (**) Generic Keyboard: always reports core events (**) Option "Protocol" "standard" (**) Generic Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Generic Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Generic Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "es" (**) Generic Keyboard: XkbLayout: "es" (**) Option "CustomKeycodes" "off" (**) Generic Keyboard: CustomKeycodes disabled (II) evaluating device (Configured Mouse) (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) evaluating device (Generic Keyboard) (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) (--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2" (II) Configured Mouse: ps2EnableDataReporting: succeeded (II) NVIDIA(0): Setting mode "320x240"

#2

si j’ai bien compris ton bureau ne s’affiche pas et tu te retrouves en mode console ,c’est bien ça? :question:

Si tu n’as pas de bureau qui s’affiche tu edites /etc/X11/xorg.conf et tu regardes cette section

[quote]Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes “1680x1050” “1600x1200” “1440x1440” “1280x1024” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
Depth 16
Modes “1680x1050” “1600x1200” “1440x1440” “1280x1024” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
Depth 24
Modes “1680x1050” “1600x1200” “1440x1440” “1280x1024” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
Virtual 1680 1050
EndSubSection
EndSection

[/quote]

tu choisis la ligne Depth qui te convient (si tu choisis depth 16 tu auras des couleurs en 32bits depth 8—>16bits et ainsi de suite) ensuite dans la ligne Modes correspondante tu met en premier une resolution dont tu es sûr qu’elle soit acceptée par ton ordi et tu rebootes ta machine ,tu dois avoir affichage de ton bureau et ensuite tu configure ton affichage avec la resolution deton choix,oublie pas de valider ton choix.

#3

Euh en fait non c’est pas ça, j’ai bien l’écran mais en 320x200.
J’ai trouvé ça depuis:
Je peux passer en mode voulu avec cette commande:
xrandr --output default --mode 1680x1050

Mais bon maintenant la question c’est comment conserver ce mode ?

osgpcq:/home/vince# xrandr
Screen 0: minimum 320 x 240, current 1680 x 1050, maximum 1680 x 1050
default connected 1680x1050+0+0 0mm x 0mm
1680x1050 50.0*
1280x1024 51.0 60.0
1152x864 52.0
1024x768 53.0 64.0 65.0
832x624 54.0
800x600 55.0 66.0 67.0 68.0
640x480 56.0 73.0 74.0
1600x1024 57.0
1440x900 58.0
1400x1050 59.0
1280x960 61.0
1280x800 62.0
1280x768 63.0
800x512 69.0
720x450 70.0
700x525 71.0 72.0
512x384 75.0 76.0
400x300 77.0
320x240 78.0 79.0

#4

Dans ta section “Monitor” supprime la ligne “Modeline” et dans ta section “Screen” la section “Display”, puis ajoute la ligne suivante dans ta section “Screen” :

PS : Pense à faire une copie de sauvegarde de ton xorg.conf avant, on ne sait jamais ce qui peut arriver…

#5

Ouaip, j’ai essayé ça mais en fait ça n’a pas fonctionné.
menu système / préférence / Résolution de l’écran
Options: V Appliquer par défaut uniquement pour cet ordinateur.

Merci bcp a tous :slightly_smiling:

Dans le message suivant je vous passe mon xorg.conf

#6

[code]osgpcq:/home/vince# cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "es"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Module"
Load "glx"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "MCP77 Board - mcp78so"
Screen 0
Option “NoLogo” "True"
EndSection

Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
EndSection
[/code]